From: Frede Florian <florian.frede@ma-info.de>
To: barebox@lists.infradead.org
Subject: Re: Problems with pyhBoard-Wega-AM335x
Date: Mon, 07 Jul 2014 10:04:58 +0200 [thread overview]
Message-ID: <53BA54AA.3000502@ma-info.de> (raw)
In-Reply-To: <53BA5442.6020708@ma-info.de>
[-- Attachment #1: Type: text/plain, Size: 1513 bytes --]
Hello Rolf,
I used this Option already, but to be sure that there is no mistake I
reconfigured the Barebox and Barebox_MLO again and use the new Version
2014.07.0. The result is the same.
LD images/start_am33xx_phytec_phycore_sram.pbl
arch/arm/boards/built-in-pbl.o: In function `pcm051_board_init':
:(.text.pcm051_board_init+0x94): undefined reference to
`__dtb_am335x_phytec_phycore_start'
make[2]: *** [images/start_am33xx_phytec_phycore_sram.pbl] Error 1
make[2]: *** Waiting for unfinished jobs....
make[1]: Leaving directory
`/phytec/phyBOARD-WEGA-AM335x-PD13.0.0/platform-phyBOARD-WEGA-AM335x/build-target/barebox_mlo-2014.07.0'
make[1]: *** [images] Error 2
make: ***
[/phytec/phyBOARD-WEGA-AM335x-PD13.0.0/platform-phyBOARD-WEGA-AM335x/state/barebox_mlo.compile]
Error 2
I also attached the config files may be there is an other error?
Regards
Florian
Am 04.07.2014 15:26, schrieb Rolf Evers-Fischer:
> Hi Florian,
>
> [...]
>
> I've had the same problem after updating my beaglebone project to a newer
> barebox version.
>
> Could you please check your barebox configuration?
> The new config item "Allow multiple boards to be selected" in "System
> Type"->"OMAP Features" needs to be selected. After that you should be able to select the "Phytec
> phyCORE pcm051" board.
>
> A rebuild will create a file called "am335x-phytec-phycore-dtb.S" in the
> folder arch/arm/dts. This file contains the missing symbols.
>
> Best regards,
> Rolf
>
[-- Attachment #2: barebox.config --]
[-- Type: text/plain, Size: 11645 bytes --]
#
# Automatically generated file; DO NOT EDIT.
# Barebox/arm 2014.07.0 Configuration
#
CONFIG_ARM=y
CONFIG_ARM_LINUX=y
#
# System Type
#
# CONFIG_ARCH_AT91 is not set
# CONFIG_ARCH_BCM2835 is not set
# CONFIG_ARCH_CLPS711X is not set
# CONFIG_ARCH_DAVINCI is not set
# CONFIG_ARCH_EP93XX is not set
# CONFIG_ARCH_HIGHBANK is not set
# CONFIG_ARCH_IMX is not set
# CONFIG_ARCH_MVEBU is not set
# CONFIG_ARCH_MXS is not set
# CONFIG_ARCH_NETX is not set
# CONFIG_ARCH_NOMADIK is not set
CONFIG_ARCH_OMAP=y
# CONFIG_ARCH_PXA is not set
# CONFIG_ARCH_ROCKCHIP is not set
# CONFIG_ARCH_SOCFPGA is not set
# CONFIG_ARCH_S3C24xx is not set
# CONFIG_ARCH_S5PCxx is not set
# CONFIG_ARCH_S3C64xx is not set
# CONFIG_ARCH_VERSATILE is not set
# CONFIG_ARCH_VEXPRESS is not set
# CONFIG_ARCH_TEGRA is not set
# CONFIG_ARCH_UEMD is not set
# CONFIG_ARCH_ZYNQ is not set
#
# Processor Type
#
CONFIG_CPU_32=y
CONFIG_CPU_V7=y
CONFIG_CPU_32v7=y
#
# processor features
#
# CONFIG_BOOT_ENDIANNESS_SWITCH is not set
CONFIG_BAREBOX_MAX_IMAGE_SIZE=0xffffffff
#
# OMAP Features
#
CONFIG_ARCH_AM33XX=y
CONFIG_OMAP_CLOCK_SOURCE_DMTIMER0=y
CONFIG_OMAP_GPMC=y
# CONFIG_OMAP_BUILD_IFT is not set
# CONFIG_OMAP_BUILD_SPI is not set
# CONFIG_BAREBOX_UPDATE_AM33XX_SPI_NOR_MLO is not set
# CONFIG_BAREBOX_UPDATE_AM33XX_NAND_XLOADSLOTS is not set
CONFIG_OMAP_MULTI_BOARDS=y
# CONFIG_MACH_BEAGLEBONE is not set
CONFIG_MACH_PCM051=y
CONFIG_AEABI=y
# CONFIG_THUMB2_BAREBOX is not set
CONFIG_ARM_BOARD_APPEND_ATAG=y
#
# ARM specific settings
#
# CONFIG_CPU_V7_DCACHE_SKIP is not set
CONFIG_ARM_OPTIMZED_STRING_FUNCTIONS=y
CONFIG_ARM_EXCEPTIONS=y
CONFIG_ARM_UNWIND=y
CONFIG_DEFCONFIG_LIST="$ARCH_DEFCONFIG"
CONFIG_HAS_KALLSYMS=y
CONFIG_HAS_MODULES=y
CONFIG_ENV_HANDLING=y
CONFIG_GENERIC_GPIO=y
CONFIG_BOOTM=y
CONFIG_BLOCK=y
CONFIG_BLOCK_WRITE=y
CONFIG_FILETYPE=y
CONFIG_BINFMT=y
CONFIG_UIMAGE=y
CONFIG_GLOBALVAR=y
CONFIG_STDDEV=y
CONFIG_BAREBOX_UPDATE=y
#
# General Settings
#
CONFIG_LOCALVERSION="LC"
CONFIG_LOCALVERSION_AUTO=y
CONFIG_BANNER=y
CONFIG_MEMINFO=y
CONFIG_ENVIRONMENT_VARIABLES=y
#
# memory layout
#
CONFIG_HAVE_PBL_IMAGE=y
CONFIG_HAVE_PBL_MULTI_IMAGES=y
CONFIG_HAVE_IMAGE_COMPRESSION=y
CONFIG_PBL_IMAGE=y
CONFIG_PBL_MULTI_IMAGES=y
CONFIG_PBL_RELOCATABLE=y
CONFIG_IMAGE_COMPRESSION=y
# CONFIG_IMAGE_COMPRESSION_LZ4 is not set
CONFIG_IMAGE_COMPRESSION_LZO=y
# CONFIG_IMAGE_COMPRESSION_GZIP is not set
# CONFIG_IMAGE_COMPRESSION_NONE is not set
CONFIG_MMU=y
CONFIG_MMU_EARLY=y
CONFIG_HAVE_CONFIGURABLE_TEXT_BASE=y
CONFIG_TEXT_BASE=0x8f000000
CONFIG_BAREBOX_MAX_PBL_SIZE=0xffffffff
CONFIG_BAREBOX_MAX_BARE_INIT_SIZE=0xffffffff
CONFIG_STACK_SIZE=0x8000
CONFIG_MALLOC_SIZE=0x4000000
# CONFIG_BROKEN is not set
# CONFIG_EXPERIMENTAL is not set
CONFIG_MALLOC_DLMALLOC=y
# CONFIG_MALLOC_TLSF is not set
# CONFIG_KALLSYMS is not set
# CONFIG_RELOCATABLE is not set
# CONFIG_PANIC_HANG is not set
CONFIG_PROMPT="barebox@pcm051>"
CONFIG_BAUDRATE=115200
CONFIG_CBSIZE=1024
CONFIG_SHELL_HUSH=y
# CONFIG_SHELL_SIMPLE is not set
# CONFIG_SHELL_NONE is not set
CONFIG_GLOB=y
CONFIG_GLOB_SORT=y
CONFIG_PROMPT_HUSH_PS2="> "
CONFIG_HUSH_FANCY_PROMPT=y
CONFIG_CMDLINE_EDITING=y
CONFIG_AUTO_COMPLETE=y
CONFIG_MENU=y
# CONFIG_PASSWORD is not set
CONFIG_DYNAMIC_CRC_TABLE=y
CONFIG_ERRNO_MESSAGES=y
# CONFIG_TIMESTAMP is not set
# CONFIG_BLSPEC is not set
# CONFIG_KERNEL_INSTALL_TARGET is not set
CONFIG_CONSOLE_FULL=y
# CONFIG_CONSOLE_SIMPLE is not set
# CONFIG_CONSOLE_NONE is not set
CONFIG_CONSOLE_ACTIVATE_FIRST=y
# CONFIG_CONSOLE_ACTIVATE_ALL is not set
# CONFIG_CONSOLE_ACTIVATE_NONE is not set
CONFIG_PARTITION=y
CONFIG_PARTITION_DISK=y
CONFIG_PARTITION_DISK_DOS=y
# CONFIG_PARTITION_DISK_EFI is not set
CONFIG_DEFAULT_ENVIRONMENT=y
# CONFIG_DEFAULT_COMPRESSION_GZIP is not set
# CONFIG_DEFAULT_COMPRESSION_LZO is not set
CONFIG_DEFAULT_COMPRESSION_NONE=y
CONFIG_HAVE_DEFAULT_ENVIRONMENT_NEW=y
CONFIG_DEFAULT_ENVIRONMENT_GENERIC_NEW=y
CONFIG_DEFAULT_ENVIRONMENT_PATH="arch/arm/boards/pcm051/env"
# CONFIG_BAREBOXENV_TARGET is not set
# CONFIG_BAREBOXCRC32_TARGET is not set
# CONFIG_POLLER is not set
# CONFIG_RESET_SOURCE is not set
#
# Debugging
#
CONFIG_COMPILE_LOGLEVEL=6
CONFIG_DEFAULT_LOGLEVEL=7
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_LL is not set
CONFIG_DEBUG_OMAP_UART_PORT=1
# CONFIG_DEBUG_INITCALLS is not set
CONFIG_HAS_DEBUG_LL=y
CONFIG_COMMAND_SUPPORT=y
# CONFIG_HAS_POWEROFF is not set
CONFIG_COMPILE_DIGEST=y
CONFIG_COMPILE_MEMORY=y
#
# Commands
#
#
# Information
#
CONFIG_CMD_ARM_CPUINFO=y
CONFIG_CMD_DEVINFO=y
CONFIG_CMD_DRVINFO=y
CONFIG_CMD_HELP=y
CONFIG_LONGHELP=y
# CONFIG_CMD_IOMEM is not set
CONFIG_CMD_MEMINFO=y
CONFIG_CMD_ARM_MMUINFO=y
CONFIG_CMD_VERSION=y
#
# Boot
#
CONFIG_FLEXIBLE_BOOTARGS=y
CONFIG_CMD_BOOT=y
CONFIG_CMD_BOOTM=y
CONFIG_CMD_BOOTM_SHOW_TYPE=y
# CONFIG_CMD_BOOTM_VERBOSE is not set
# CONFIG_CMD_BOOTM_INITRD is not set
# CONFIG_CMD_BOOTM_OFTREE is not set
# CONFIG_CMD_BOOTM_AIMAGE is not set
CONFIG_CMD_BOOTU=y
CONFIG_CMD_BOOTZ=y
CONFIG_CMD_GO=y
CONFIG_CMD_LOADB=y
# CONFIG_CMD_LOADS is not set
# CONFIG_CMD_LOADY is not set
CONFIG_CMD_RESET=y
CONFIG_CMD_UIMAGE=y
#
# Partition
#
CONFIG_CMD_PARTITION=y
CONFIG_CMD_AUTOMOUNT=y
CONFIG_CMD_MOUNT=y
CONFIG_CMD_UBI=y
CONFIG_CMD_UBIFORMAT=y
CONFIG_CMD_UMOUNT=y
#
# Environment
#
CONFIG_CMD_EXPORT=y
CONFIG_CMD_GLOBAL=y
CONFIG_CMD_LOADENV=y
CONFIG_CMD_PRINTENV=y
# CONFIG_CMD_MAGICVAR is not set
CONFIG_CMD_SAVEENV=y
#
# File
#
CONFIG_CMD_BASENAME=y
CONFIG_CMD_CAT=y
CONFIG_CMD_CD=y
CONFIG_CMD_CP=y
CONFIG_CMD_DIRNAME=y
# CONFIG_CMD_FILETYPE is not set
# CONFIG_CMD_LN is not set
CONFIG_CMD_LS=y
CONFIG_CMD_MD5SUM=y
CONFIG_CMD_MKDIR=y
CONFIG_CMD_PWD=y
CONFIG_CMD_READLINK=y
CONFIG_CMD_RM=y
CONFIG_CMD_RMDIR=y
# CONFIG_CMD_SHA1SUM is not set
# CONFIG_CMD_SHA224SUM is not set
# CONFIG_CMD_SHA256SUM is not set
CONFIG_CMD_UNCOMPRESS=y
#
# Shell scripting
#
CONFIG_CMD_FALSE=y
CONFIG_CMD_GETOPT=y
# CONFIG_CMD_LET is not set
# CONFIG_CMD_MSLEEP is not set
# CONFIG_CMD_READF is not set
CONFIG_CMD_SLEEP=y
CONFIG_CMD_TEST=y
CONFIG_CMD_TRUE=y
#
# Network
#
# CONFIG_CMD_DHCP is not set
# CONFIG_CMD_HOST is not set
CONFIG_NET_CMD_IFUP=y
CONFIG_CMD_MIITOOL=y
# CONFIG_CMD_PING is not set
CONFIG_CMD_TFTP=y
#
# Console and Framebuffer interaction
#
CONFIG_CMD_CLEAR=y
CONFIG_CMD_ECHO=y
CONFIG_CMD_ECHO_E=y
CONFIG_CMD_EDIT=y
# CONFIG_CMD_LOGIN is not set
CONFIG_CMD_MENU=y
CONFIG_CMD_MENU_MANAGEMENT=y
# CONFIG_CMD_MENUTREE is not set
# CONFIG_CMD_PASSWD is not set
# CONFIG_CMD_SPLASH is not set
CONFIG_CMD_READLINE=y
CONFIG_CMD_TIMEOUT=y
#
# Memory
#
CONFIG_CMD_CRC=y
CONFIG_CMD_CRC_CMP=y
CONFIG_CMD_MD=y
CONFIG_CMD_MEMCMP=y
CONFIG_CMD_MEMCPY=y
CONFIG_CMD_MEMSET=y
CONFIG_CMD_MEMTEST=y
# CONFIG_CMD_MM is not set
CONFIG_CMD_MW=y
#
# Hardware manipulation
#
# CONFIG_CMD_DETECT is not set
CONFIG_CMD_FLASH=y
CONFIG_CMD_GPIO=y
CONFIG_CMD_I2C=y
CONFIG_CMD_NAND=y
CONFIG_CMD_NANDTEST=y
CONFIG_CMD_USB=y
#
# Miscelleanous
#
# CONFIG_CMD_2048 is not set
CONFIG_CMD_BAREBOX_UPDATE=y
# CONFIG_CMD_OF_DUMP is not set
# CONFIG_CMD_OF_NODE is not set
# CONFIG_CMD_OF_PROPERTY is not set
# CONFIG_CMD_OFTREE is not set
CONFIG_CMD_TIME=y
CONFIG_NET=y
CONFIG_NET_NFS=y
# CONFIG_NET_NETCONSOLE is not set
# CONFIG_NET_RESOLV is not set
CONFIG_NET_IFUP=y
#
# Drivers
#
# CONFIG_OFDEVICE is not set
CONFIG_OF_NET=y
#
# serial drivers
#
# CONFIG_DRIVER_SERIAL_ARM_DCC is not set
CONFIG_DRIVER_SERIAL_NS16550=y
CONFIG_DRIVER_SERIAL_NS16550_OMAP_EXTENSIONS=y
# CONFIG_DRIVER_SERIAL_CADENCE is not set
CONFIG_PHYLIB=y
#
# Network drivers
#
# CONFIG_DRIVER_NET_ARC_EMAC is not set
# CONFIG_DRIVER_NET_CALXEDA_XGMAC is not set
CONFIG_DRIVER_NET_CPSW=y
# CONFIG_DRIVER_NET_DESIGNWARE is not set
# CONFIG_DRIVER_NET_ETHOC is not set
# CONFIG_DRIVER_NET_KS8851_MLL is not set
# CONFIG_DRIVER_NET_SMC911X is not set
# CONFIG_DRIVER_NET_SMC91111 is not set
#
# phylib
#
#
# MII PHY device drivers
#
# CONFIG_AT803X_PHY is not set
# CONFIG_LXT_PHY is not set
# CONFIG_MICREL_PHY is not set
# CONFIG_NATIONAL_PHY is not set
CONFIG_SMSC_PHY=y
#
# MII bus device drivers
#
# CONFIG_NET_USB is not set
#
# SPI drivers
#
# CONFIG_SPI is not set
CONFIG_I2C=y
#
# I2C Hardware Bus support
#
# CONFIG_I2C_GPIO is not set
CONFIG_I2C_OMAP=y
CONFIG_MTD=y
CONFIG_MTD_WRITE=y
CONFIG_MTD_OOB_DEVICE=y
# CONFIG_MTD_RAW_DEVICE is not set
#
# Self contained MTD devices
#
# CONFIG_MTD_DOCG3 is not set
# CONFIG_DRIVER_CFI is not set
CONFIG_NAND=y
CONFIG_NAND_ECC_SOFT=y
# CONFIG_NAND_ECC_BCH is not set
CONFIG_NAND_ECC_HW=y
# CONFIG_NAND_ECC_HW_OOB_FIRST is not set
CONFIG_NAND_ECC_HW_SYNDROME=y
CONFIG_NAND_ECC_HW_NONE=y
CONFIG_NAND_INFO=y
CONFIG_NAND_READ_OOB=y
CONFIG_NAND_BBT=y
# CONFIG_NAND_ALLOW_ERASE_BAD is not set
CONFIG_NAND_OMAP_GPMC=y
# CONFIG_MTD_NAND_ECC_SMC is not set
CONFIG_MTD_NAND_IDS=y
CONFIG_MTD_UBI=y
CONFIG_MTD_UBI_WL_THRESHOLD=4096
CONFIG_MTD_UBI_BEB_LIMIT=20
# CONFIG_MTD_UBI_FASTMAP is not set
CONFIG_DISK=y
CONFIG_DISK_WRITE=y
#
# drive types
#
# CONFIG_DISK_ATA is not set
# CONFIG_DISK_AHCI is not set
#
# interface types
#
# CONFIG_DISK_INTF_PLATFORM_IDE is not set
CONFIG_USB=y
# CONFIG_USB_EHCI is not set
# CONFIG_USB_ULPI is not set
# CONFIG_USB_STORAGE is not set
# CONFIG_VIDEO is not set
CONFIG_MCI=y
#
# --- Feature list ---
#
CONFIG_MCI_STARTUP=y
CONFIG_MCI_INFO=y
CONFIG_MCI_WRITE=y
# CONFIG_MCI_MMC_BOOT_PARTITIONS is not set
#
# --- MCI host drivers ---
#
# CONFIG_MCI_DW is not set
CONFIG_MCI_OMAP_HSMMC=y
# CONFIG_CLOCKSOURCE_DUMMY is not set
#
# MFD
#
# CONFIG_MFD_ACT8846 is not set
# CONFIG_MFD_LP3972 is not set
# CONFIG_MFD_MC13XXX is not set
# CONFIG_MFD_MC34704 is not set
# CONFIG_MFD_MC9SDZ60 is not set
# CONFIG_MFD_STMPE is not set
# CONFIG_MFD_SYSCON is not set
# CONFIG_MFD_TWL4030 is not set
# CONFIG_MFD_TWL6030 is not set
#
# Misc devices
#
# CONFIG_JTAG is not set
# CONFIG_SRAM is not set
# CONFIG_LED is not set
#
# EEPROM support
#
CONFIG_EEPROM_AT24=y
#
# Input device support
#
# CONFIG_KEYBOARD_GPIO is not set
# CONFIG_KEYBOARD_QT1070 is not set
# CONFIG_WATCHDOG is not set
# CONFIG_PWM is not set
#
# DMA support
#
CONFIG_GPIOLIB=y
#
# GPIO
#
CONFIG_GPIO_GENERIC=y
CONFIG_GPIO_GENERIC_PLATFORM=y
# CONFIG_GPIO_IMX is not set
CONFIG_GPIO_OMAP=y
# CONFIG_GPIO_DESIGNWARE is not set
# CONFIG_W1 is not set
# CONFIG_PINCTRL_SINGLE is not set
#
# Bus devices
#
# CONFIG_RESET_CONTROLLER is not set
#
# Filesystem support
#
CONFIG_FS=y
CONFIG_FS_AUTOMOUNT=y
# CONFIG_FS_CRAMFS is not set
CONFIG_FS_EXT4=y
CONFIG_FS_RAMFS=y
CONFIG_FS_DEVFS=y
CONFIG_FS_TFTP=y
CONFIG_FS_NFS=y
CONFIG_FS_FAT=y
CONFIG_FS_FAT_WRITE=y
CONFIG_FS_FAT_LFN=y
# CONFIG_FS_UBIFS is not set
# CONFIG_FS_BPKFS is not set
# CONFIG_FS_UIMAGEFS is not set
#
# Library routines
#
CONFIG_PARAMETER=y
CONFIG_UNCOMPRESS=y
CONFIG_ZLIB=y
# CONFIG_BZLIB is not set
# CONFIG_LZ4_DECOMPRESS is not set
# CONFIG_GENERIC_FIND_NEXT_BIT is not set
CONFIG_PROCESS_ESCAPE_SEQUENCE=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_QSORT=y
CONFIG_LIBSCAN=y
CONFIG_LIBUBIGEN=y
CONFIG_LIBMTD=y
#
# Library gui routines
#
CONFIG_CRC32=y
CONFIG_CRC16=y
CONFIG_DIGEST=y
CONFIG_MD5=y
# CONFIG_SHA1 is not set
# CONFIG_SHA224 is not set
# CONFIG_SHA256 is not set
[-- Attachment #3: barebox_mlo.config --]
[-- Type: text/plain, Size: 6594 bytes --]
#
# Automatically generated file; DO NOT EDIT.
# Barebox/arm 2014.07.0 Configuration
#
CONFIG_ARM=y
#
# System Type
#
# CONFIG_ARCH_AT91 is not set
# CONFIG_ARCH_BCM2835 is not set
# CONFIG_ARCH_CLPS711X is not set
# CONFIG_ARCH_DAVINCI is not set
# CONFIG_ARCH_EP93XX is not set
# CONFIG_ARCH_HIGHBANK is not set
# CONFIG_ARCH_IMX is not set
# CONFIG_ARCH_MVEBU is not set
# CONFIG_ARCH_MXS is not set
# CONFIG_ARCH_NETX is not set
# CONFIG_ARCH_NOMADIK is not set
CONFIG_ARCH_OMAP=y
# CONFIG_ARCH_PXA is not set
# CONFIG_ARCH_ROCKCHIP is not set
# CONFIG_ARCH_SOCFPGA is not set
# CONFIG_ARCH_S3C24xx is not set
# CONFIG_ARCH_S5PCxx is not set
# CONFIG_ARCH_S3C64xx is not set
# CONFIG_ARCH_VERSATILE is not set
# CONFIG_ARCH_VEXPRESS is not set
# CONFIG_ARCH_TEGRA is not set
# CONFIG_ARCH_UEMD is not set
# CONFIG_ARCH_ZYNQ is not set
#
# Processor Type
#
CONFIG_CPU_32=y
CONFIG_CPU_V7=y
CONFIG_CPU_32v7=y
#
# processor features
#
# CONFIG_BOOT_ENDIANNESS_SWITCH is not set
CONFIG_BAREBOX_MAX_IMAGE_SIZE=0xffffffff
#
# OMAP Features
#
CONFIG_ARCH_AM33XX=y
CONFIG_OMAP_CLOCK_SOURCE_DMTIMER0=y
CONFIG_OMAP_GPMC=y
CONFIG_OMAP_BUILD_IFT=y
# CONFIG_OMAP_BUILD_SPI is not set
CONFIG_OMAP_MULTI_BOARDS=y
# CONFIG_MACH_BEAGLEBONE is not set
CONFIG_MACH_PCM051=y
CONFIG_ARM_ASM_UNIFIED=y
CONFIG_AEABI=y
CONFIG_THUMB2_BAREBOX=y
#
# ARM specific settings
#
# CONFIG_CPU_V7_DCACHE_SKIP is not set
# CONFIG_ARM_OPTIMZED_STRING_FUNCTIONS is not set
CONFIG_ARM_EXCEPTIONS=y
# CONFIG_ARM_UNWIND is not set
CONFIG_DEFCONFIG_LIST="$ARCH_DEFCONFIG"
CONFIG_HAS_KALLSYMS=y
CONFIG_HAS_MODULES=y
CONFIG_GENERIC_GPIO=y
CONFIG_BLOCK=y
CONFIG_BLOCK_WRITE=y
CONFIG_FILETYPE=y
#
# General Settings
#
CONFIG_LOCALVERSION="-PD13.0.0 phyBOARD-WEGA MLO"
CONFIG_LOCALVERSION_AUTO=y
CONFIG_BANNER=y
# CONFIG_MEMINFO is not set
CONFIG_ENVIRONMENT_VARIABLES=y
#
# memory layout
#
CONFIG_HAVE_PBL_IMAGE=y
CONFIG_HAVE_PBL_MULTI_IMAGES=y
CONFIG_HAVE_IMAGE_COMPRESSION=y
CONFIG_PBL_IMAGE=y
CONFIG_PBL_MULTI_IMAGES=y
CONFIG_PBL_RELOCATABLE=y
CONFIG_IMAGE_COMPRESSION=y
# CONFIG_IMAGE_COMPRESSION_LZ4 is not set
CONFIG_IMAGE_COMPRESSION_LZO=y
# CONFIG_IMAGE_COMPRESSION_GZIP is not set
# CONFIG_IMAGE_COMPRESSION_NONE is not set
CONFIG_MMU=y
CONFIG_MMU_EARLY=y
CONFIG_HAVE_CONFIGURABLE_TEXT_BASE=y
CONFIG_TEXT_BASE=0x402F0400
CONFIG_BAREBOX_MAX_PBL_SIZE=0xffffffff
CONFIG_BAREBOX_MAX_BARE_INIT_SIZE=0xffffffff
CONFIG_STACK_SIZE=0x1600
CONFIG_MALLOC_SIZE=0x1000000
# CONFIG_BROKEN is not set
# CONFIG_EXPERIMENTAL is not set
CONFIG_MALLOC_DLMALLOC=y
# CONFIG_MALLOC_TLSF is not set
# CONFIG_MALLOC_DUMMY is not set
# CONFIG_KALLSYMS is not set
# CONFIG_RELOCATABLE is not set
# CONFIG_PANIC_HANG is not set
CONFIG_PROMPT="MLO>"
CONFIG_BAUDRATE=115200
CONFIG_SIMPLE_READLINE=y
CONFIG_CBSIZE=1024
# CONFIG_SHELL_HUSH is not set
# CONFIG_SHELL_SIMPLE is not set
CONFIG_SHELL_NONE=y
# CONFIG_GLOB is not set
# CONFIG_MENU is not set
# CONFIG_PASSWORD is not set
# CONFIG_ERRNO_MESSAGES is not set
# CONFIG_TIMESTAMP is not set
# CONFIG_BLSPEC is not set
# CONFIG_KERNEL_INSTALL_TARGET is not set
# CONFIG_CONSOLE_FULL is not set
CONFIG_CONSOLE_SIMPLE=y
# CONFIG_CONSOLE_NONE is not set
CONFIG_PARTITION=y
CONFIG_PARTITION_DISK=y
CONFIG_PARTITION_DISK_DOS=y
# CONFIG_PARTITION_DISK_EFI is not set
# CONFIG_DEFAULT_ENVIRONMENT is not set
CONFIG_DEFAULT_COMPRESSION_NONE=y
CONFIG_HAVE_DEFAULT_ENVIRONMENT_NEW=y
# CONFIG_BAREBOXENV_TARGET is not set
# CONFIG_BAREBOXCRC32_TARGET is not set
# CONFIG_POLLER is not set
#
# Debugging
#
CONFIG_COMPILE_LOGLEVEL=6
CONFIG_DEFAULT_LOGLEVEL=7
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_LL is not set
CONFIG_DEBUG_OMAP_UART_PORT=1
# CONFIG_DEBUG_INITCALLS is not set
CONFIG_HAS_DEBUG_LL=y
# CONFIG_HAS_POWEROFF is not set
# CONFIG_NET is not set
#
# Drivers
#
# CONFIG_OFDEVICE is not set
#
# serial drivers
#
# CONFIG_DRIVER_SERIAL_ARM_DCC is not set
CONFIG_DRIVER_SERIAL_NS16550=y
CONFIG_DRIVER_SERIAL_NS16550_OMAP_EXTENSIONS=y
# CONFIG_DRIVER_SERIAL_CADENCE is not set
#
# SPI drivers
#
# CONFIG_SPI is not set
# CONFIG_I2C is not set
CONFIG_MTD=y
CONFIG_MTD_WRITE=y
CONFIG_MTD_OOB_DEVICE=y
# CONFIG_MTD_RAW_DEVICE is not set
#
# Self contained MTD devices
#
# CONFIG_MTD_DOCG3 is not set
# CONFIG_DRIVER_CFI is not set
CONFIG_NAND=y
CONFIG_NAND_ECC_SOFT=y
# CONFIG_NAND_ECC_BCH is not set
CONFIG_NAND_ECC_HW=y
# CONFIG_NAND_ECC_HW_OOB_FIRST is not set
CONFIG_NAND_ECC_HW_SYNDROME=y
# CONFIG_NAND_ECC_HW_NONE is not set
CONFIG_NAND_INFO=y
CONFIG_NAND_READ_OOB=y
CONFIG_NAND_BBT=y
# CONFIG_NAND_ALLOW_ERASE_BAD is not set
CONFIG_NAND_OMAP_GPMC=y
# CONFIG_MTD_NAND_ECC_SMC is not set
CONFIG_MTD_NAND_IDS=y
# CONFIG_MTD_UBI is not set
CONFIG_DISK=y
CONFIG_DISK_WRITE=y
#
# drive types
#
# CONFIG_DISK_ATA is not set
# CONFIG_DISK_AHCI is not set
#
# interface types
#
# CONFIG_DISK_INTF_PLATFORM_IDE is not set
# CONFIG_USB is not set
# CONFIG_VIDEO is not set
CONFIG_MCI=y
#
# --- Feature list ---
#
CONFIG_MCI_STARTUP=y
# CONFIG_MCI_WRITE is not set
# CONFIG_MCI_MMC_BOOT_PARTITIONS is not set
#
# --- MCI host drivers ---
#
# CONFIG_MCI_DW is not set
CONFIG_MCI_OMAP_HSMMC=y
# CONFIG_CLOCKSOURCE_DUMMY is not set
#
# MFD
#
# CONFIG_MFD_SYSCON is not set
#
# Misc devices
#
# CONFIG_JTAG is not set
# CONFIG_SRAM is not set
# CONFIG_LED is not set
#
# EEPROM support
#
#
# Input device support
#
# CONFIG_KEYBOARD_GPIO is not set
# CONFIG_WATCHDOG is not set
# CONFIG_PWM is not set
#
# DMA support
#
CONFIG_GPIOLIB=y
#
# GPIO
#
# CONFIG_GPIO_GENERIC_PLATFORM is not set
# CONFIG_GPIO_IMX is not set
CONFIG_GPIO_OMAP=y
# CONFIG_GPIO_DESIGNWARE is not set
# CONFIG_W1 is not set
# CONFIG_PINCTRL_SINGLE is not set
#
# Bus devices
#
# CONFIG_RESET_CONTROLLER is not set
#
# Filesystem support
#
CONFIG_FS=y
# CONFIG_FS_CRAMFS is not set
# CONFIG_FS_EXT4 is not set
# CONFIG_FS_RAMFS is not set
# CONFIG_FS_DEVFS is not set
CONFIG_FS_FAT=y
# CONFIG_FS_FAT_WRITE is not set
CONFIG_FS_FAT_LFN=y
# CONFIG_FS_BPKFS is not set
# CONFIG_FS_UIMAGEFS is not set
#
# Library routines
#
# CONFIG_ZLIB is not set
# CONFIG_BZLIB is not set
# CONFIG_LZ4_DECOMPRESS is not set
# CONFIG_GENERIC_FIND_NEXT_BIT is not set
# CONFIG_PROCESS_ESCAPE_SEQUENCE is not set
# CONFIG_LZO_DECOMPRESS is not set
#
# Library gui routines
#
# CONFIG_BOOTSTRAP is not set
# CONFIG_DIGEST is not set
[-- Attachment #4: Type: text/plain, Size: 149 bytes --]
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2014-07-07 8:12 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-07-04 13:26 Problems with pyhBoard-Wega-AM335x Rolf Evers-Fischer
[not found] ` <53BA5442.6020708@ma-info.de>
2014-07-07 8:04 ` Frede Florian [this message]
2014-07-07 10:05 ` Rolf Evers-Fischer
2014-07-07 11:14 ` Frede Florian
2014-07-07 12:00 ` Sascha Hauer
2014-07-07 12:04 ` Robert P. J. Day
2014-07-07 12:16 ` Sascha Hauer
2014-07-07 12:29 ` Rolf Evers-Fischer
2014-07-08 9:29 ` Frede Florian
2014-07-08 10:01 ` Teresa Gamez
2014-07-09 6:47 ` Rolf Evers-Fischer
2014-07-09 12:32 ` Frede Florian
2014-07-21 9:34 ` Frede Florian
2014-07-22 7:20 ` Holger Schurig
-- strict thread matches above, loose matches on Subject: below --
2014-07-04 10:12 Frede Florian
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=53BA54AA.3000502@ma-info.de \
--to=florian.frede@ma-info.de \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.