* [PATCH v4 0/3] Add R8A7791/Koelsch/Henninger board PCI DT support
@ 2014-06-24 18:07 ` Sergei Shtylyov
0 siblings, 0 replies; 21+ messages in thread
From: Sergei Shtylyov @ 2014-06-24 18:07 UTC (permalink / raw)
To: horms, linux-sh, robh+dt, pawel.moll, mark.rutland,
ijc+devicetree, galak, devicetree
Cc: magnus.damm, linux, linux-arm-kernel
Hello.
Here's the set of 3 patches against Simon Horman's 'renesas.git' repo,
'renesas-devel-v3.16-rc2-20140623' tag. Here we add PCI USB device tree support
for the R8A7791-based Koelsch and Henninger boards. As the 'pci-rcar-gen2'
driver device tree support has been merged for 3.16, this patchset can now be
merged too...
[1/3] ARM: shmobile: r8a7791: add internal PCI bridge nodes
[2/3] ARM: shmobile: koelsch: enable internal PCI
[3/3] ARM: shmobile: henninger: enable internal PCI
WBR, Sergei
^ permalink raw reply [flat|nested] 21+ messages in thread
* [PATCH v4 0/3] Add R8A7791/Koelsch/Henninger board PCI DT support
@ 2014-06-24 18:07 ` Sergei Shtylyov
0 siblings, 0 replies; 21+ messages in thread
From: Sergei Shtylyov @ 2014-06-24 18:07 UTC (permalink / raw)
To: linux-arm-kernel
Hello.
Here's the set of 3 patches against Simon Horman's 'renesas.git' repo,
'renesas-devel-v3.16-rc2-20140623' tag. Here we add PCI USB device tree support
for the R8A7791-based Koelsch and Henninger boards. As the 'pci-rcar-gen2'
driver device tree support has been merged for 3.16, this patchset can now be
merged too...
[1/3] ARM: shmobile: r8a7791: add internal PCI bridge nodes
[2/3] ARM: shmobile: koelsch: enable internal PCI
[3/3] ARM: shmobile: henninger: enable internal PCI
WBR, Sergei
^ permalink raw reply [flat|nested] 21+ messages in thread
* [PATCH v4 1/3] ARM: shmobile: r8a7791: add internal PCI bridge nodes
2014-06-24 18:07 ` Sergei Shtylyov
(?)
@ 2014-06-24 18:10 ` Sergei Shtylyov
-1 siblings, 0 replies; 21+ messages in thread
From: Sergei Shtylyov @ 2014-06-24 18:10 UTC (permalink / raw)
To: linux-arm-kernel
Add device nodes for the R8A7791 internal PCI bridge devices.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
---
Changes in version 4:
- added "device_type" and "ranges" properties to the PCI bridge nodes;
- removed "0x" prefix from zero values in the "reg" properties.
Changes in version 3:
- refreshed the patch.
Changes in version 2:
- added interrupt-related properties to the PCI device nodes;
- refreshed the patch.
arch/arm/boot/dts/r8a7791.dtsi | 40 ++++++++++++++++++++++++++++++++++++++++
1 file changed, 40 insertions(+)
Index: renesas/arch/arm/boot/dts/r8a7791.dtsi
=================================--- renesas.orig/arch/arm/boot/dts/r8a7791.dtsi
+++ renesas/arch/arm/boot/dts/r8a7791.dtsi
@@ -961,6 +961,46 @@
status = "disabled";
};
+ pci0: pci@ee090000 {
+ compatible = "renesas,pci-r8a7791";
+ device_type = "pci";
+ clocks = <&mstp7_clks R8A7791_CLK_EHCI>;
+ reg = <0 0xee090000 0 0xc00>,
+ <0 0xee080000 0 0x1100>;
+ interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+
+ bus-range = <0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ ranges = <0x02000000 0 0xee080000 0 0xee080000 0 0x00010000>;
+ interrupt-map-mask = <0xff00 0 0 0x7>;
+ interrupt-map = <0x0000 0 0 1 &gic 0 108 IRQ_TYPE_LEVEL_HIGH
+ 0x0800 0 0 1 &gic 0 108 IRQ_TYPE_LEVEL_HIGH
+ 0x1000 0 0 2 &gic 0 108 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ pci1: pci@ee0d0000 {
+ compatible = "renesas,pci-r8a7791";
+ device_type = "pci";
+ clocks = <&mstp7_clks R8A7791_CLK_EHCI>;
+ reg = <0 0xee0d0000 0 0xc00>,
+ <0 0xee0c0000 0 0x1100>;
+ interrupts = <0 113 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+
+ bus-range = <1 1>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ ranges = <0x02000000 0 0xee0c0000 0 0xee0c0000 0 0x00010000>;
+ interrupt-map-mask = <0xff00 0 0 0x7>;
+ interrupt-map = <0x0000 0 0 1 &gic 0 113 IRQ_TYPE_LEVEL_HIGH
+ 0x0800 0 0 1 &gic 0 113 IRQ_TYPE_LEVEL_HIGH
+ 0x1000 0 0 2 &gic 0 113 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
pciec: pcie@fe000000 {
compatible = "renesas,pcie-r8a7791";
reg = <0 0xfe000000 0 0x80000>;
^ permalink raw reply [flat|nested] 21+ messages in thread* [PATCH v4 1/3] ARM: shmobile: r8a7791: add internal PCI bridge nodes
@ 2014-06-24 18:10 ` Sergei Shtylyov
0 siblings, 0 replies; 21+ messages in thread
From: Sergei Shtylyov @ 2014-06-24 18:10 UTC (permalink / raw)
To: horms, linux-sh, robh+dt, pawel.moll, mark.rutland,
ijc+devicetree, galak, devicetree
Cc: magnus.damm, linux, linux-arm-kernel
Add device nodes for the R8A7791 internal PCI bridge devices.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
---
Changes in version 4:
- added "device_type" and "ranges" properties to the PCI bridge nodes;
- removed "0x" prefix from zero values in the "reg" properties.
Changes in version 3:
- refreshed the patch.
Changes in version 2:
- added interrupt-related properties to the PCI device nodes;
- refreshed the patch.
arch/arm/boot/dts/r8a7791.dtsi | 40 ++++++++++++++++++++++++++++++++++++++++
1 file changed, 40 insertions(+)
Index: renesas/arch/arm/boot/dts/r8a7791.dtsi
===================================================================
--- renesas.orig/arch/arm/boot/dts/r8a7791.dtsi
+++ renesas/arch/arm/boot/dts/r8a7791.dtsi
@@ -961,6 +961,46 @@
status = "disabled";
};
+ pci0: pci@ee090000 {
+ compatible = "renesas,pci-r8a7791";
+ device_type = "pci";
+ clocks = <&mstp7_clks R8A7791_CLK_EHCI>;
+ reg = <0 0xee090000 0 0xc00>,
+ <0 0xee080000 0 0x1100>;
+ interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+
+ bus-range = <0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ ranges = <0x02000000 0 0xee080000 0 0xee080000 0 0x00010000>;
+ interrupt-map-mask = <0xff00 0 0 0x7>;
+ interrupt-map = <0x0000 0 0 1 &gic 0 108 IRQ_TYPE_LEVEL_HIGH
+ 0x0800 0 0 1 &gic 0 108 IRQ_TYPE_LEVEL_HIGH
+ 0x1000 0 0 2 &gic 0 108 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ pci1: pci@ee0d0000 {
+ compatible = "renesas,pci-r8a7791";
+ device_type = "pci";
+ clocks = <&mstp7_clks R8A7791_CLK_EHCI>;
+ reg = <0 0xee0d0000 0 0xc00>,
+ <0 0xee0c0000 0 0x1100>;
+ interrupts = <0 113 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+
+ bus-range = <1 1>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ ranges = <0x02000000 0 0xee0c0000 0 0xee0c0000 0 0x00010000>;
+ interrupt-map-mask = <0xff00 0 0 0x7>;
+ interrupt-map = <0x0000 0 0 1 &gic 0 113 IRQ_TYPE_LEVEL_HIGH
+ 0x0800 0 0 1 &gic 0 113 IRQ_TYPE_LEVEL_HIGH
+ 0x1000 0 0 2 &gic 0 113 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
pciec: pcie@fe000000 {
compatible = "renesas,pcie-r8a7791";
reg = <0 0xfe000000 0 0x80000>;
^ permalink raw reply [flat|nested] 21+ messages in thread* [PATCH v4 1/3] ARM: shmobile: r8a7791: add internal PCI bridge nodes
@ 2014-06-24 18:10 ` Sergei Shtylyov
0 siblings, 0 replies; 21+ messages in thread
From: Sergei Shtylyov @ 2014-06-24 18:10 UTC (permalink / raw)
To: linux-arm-kernel
Add device nodes for the R8A7791 internal PCI bridge devices.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
---
Changes in version 4:
- added "device_type" and "ranges" properties to the PCI bridge nodes;
- removed "0x" prefix from zero values in the "reg" properties.
Changes in version 3:
- refreshed the patch.
Changes in version 2:
- added interrupt-related properties to the PCI device nodes;
- refreshed the patch.
arch/arm/boot/dts/r8a7791.dtsi | 40 ++++++++++++++++++++++++++++++++++++++++
1 file changed, 40 insertions(+)
Index: renesas/arch/arm/boot/dts/r8a7791.dtsi
===================================================================
--- renesas.orig/arch/arm/boot/dts/r8a7791.dtsi
+++ renesas/arch/arm/boot/dts/r8a7791.dtsi
@@ -961,6 +961,46 @@
status = "disabled";
};
+ pci0: pci at ee090000 {
+ compatible = "renesas,pci-r8a7791";
+ device_type = "pci";
+ clocks = <&mstp7_clks R8A7791_CLK_EHCI>;
+ reg = <0 0xee090000 0 0xc00>,
+ <0 0xee080000 0 0x1100>;
+ interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+
+ bus-range = <0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ ranges = <0x02000000 0 0xee080000 0 0xee080000 0 0x00010000>;
+ interrupt-map-mask = <0xff00 0 0 0x7>;
+ interrupt-map = <0x0000 0 0 1 &gic 0 108 IRQ_TYPE_LEVEL_HIGH
+ 0x0800 0 0 1 &gic 0 108 IRQ_TYPE_LEVEL_HIGH
+ 0x1000 0 0 2 &gic 0 108 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ pci1: pci at ee0d0000 {
+ compatible = "renesas,pci-r8a7791";
+ device_type = "pci";
+ clocks = <&mstp7_clks R8A7791_CLK_EHCI>;
+ reg = <0 0xee0d0000 0 0xc00>,
+ <0 0xee0c0000 0 0x1100>;
+ interrupts = <0 113 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+
+ bus-range = <1 1>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ ranges = <0x02000000 0 0xee0c0000 0 0xee0c0000 0 0x00010000>;
+ interrupt-map-mask = <0xff00 0 0 0x7>;
+ interrupt-map = <0x0000 0 0 1 &gic 0 113 IRQ_TYPE_LEVEL_HIGH
+ 0x0800 0 0 1 &gic 0 113 IRQ_TYPE_LEVEL_HIGH
+ 0x1000 0 0 2 &gic 0 113 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
pciec: pcie at fe000000 {
compatible = "renesas,pcie-r8a7791";
reg = <0 0xfe000000 0 0x80000>;
^ permalink raw reply [flat|nested] 21+ messages in thread
* [PATCH v4 2/3] ARM: shmobile: koelsch: enable internal PCI
2014-06-24 18:07 ` Sergei Shtylyov
(?)
@ 2014-06-24 18:11 ` Sergei Shtylyov
-1 siblings, 0 replies; 21+ messages in thread
From: Sergei Shtylyov @ 2014-06-24 18:11 UTC (permalink / raw)
To: linux-arm-kernel
Enable internal AHB-PCI bridges for the USB EHCI/OHCI controllers attached to
them.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
---
Changes in version 3:
- refreshed the patch.
Changes in version 2:
- refreshed the patch.
arch/arm/boot/dts/r8a7791-koelsch.dts | 22 ++++++++++++++++++++++
1 file changed, 22 insertions(+)
Index: renesas/arch/arm/boot/dts/r8a7791-koelsch.dts
=================================--- renesas.orig/arch/arm/boot/dts/r8a7791-koelsch.dts
+++ renesas/arch/arm/boot/dts/r8a7791-koelsch.dts
@@ -279,6 +279,16 @@
renesas,groups = "i2c6";
renesas,function = "i2c6";
};
+
+ usb0_pins: usb0 {
+ renesas,groups = "usb0";
+ renesas,function = "usb0";
+ };
+
+ usb1_pins: usb1 {
+ renesas,groups = "usb1";
+ renesas,function = "usb1";
+ };
};
ðer {
@@ -426,6 +436,18 @@
};
};
+&pci0 {
+ status = "okay";
+ pinctrl-0 = <&usb0_pins>;
+ pinctrl-names = "default";
+};
+
+&pci1 {
+ status = "okay";
+ pinctrl-0 = <&usb1_pins>;
+ pinctrl-names = "default";
+};
+
&pcie_bus_clk {
status = "okay";
};
^ permalink raw reply [flat|nested] 21+ messages in thread* [PATCH v4 2/3] ARM: shmobile: koelsch: enable internal PCI
@ 2014-06-24 18:11 ` Sergei Shtylyov
0 siblings, 0 replies; 21+ messages in thread
From: Sergei Shtylyov @ 2014-06-24 18:11 UTC (permalink / raw)
To: horms-/R6kz+dDXgpPR4JQBCEnsQ, linux-sh-u79uwXL29TY76Z2rM5mHXA,
robh+dt-DgEjT+Ai2ygdnm+yROfE0A, pawel.moll-5wv7dgnIgG8,
mark.rutland-5wv7dgnIgG8, ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg,
galak-sgV2jX0FEOL9JmXXK+q4OQ, devicetree-u79uwXL29TY76Z2rM5mHXA
Cc: magnus.damm-Re5JQEeQqe8AvxtiuMwx3w, linux-lFZ/pmaqli7XmaaqVzeoHQ,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r
Enable internal AHB-PCI bridges for the USB EHCI/OHCI controllers attached to
them.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov-M4DtvfQ/ZS1MRgGoP+s0PdBPR1lH4CV8@public.gmane.org>
---
Changes in version 3:
- refreshed the patch.
Changes in version 2:
- refreshed the patch.
arch/arm/boot/dts/r8a7791-koelsch.dts | 22 ++++++++++++++++++++++
1 file changed, 22 insertions(+)
Index: renesas/arch/arm/boot/dts/r8a7791-koelsch.dts
===================================================================
--- renesas.orig/arch/arm/boot/dts/r8a7791-koelsch.dts
+++ renesas/arch/arm/boot/dts/r8a7791-koelsch.dts
@@ -279,6 +279,16 @@
renesas,groups = "i2c6";
renesas,function = "i2c6";
};
+
+ usb0_pins: usb0 {
+ renesas,groups = "usb0";
+ renesas,function = "usb0";
+ };
+
+ usb1_pins: usb1 {
+ renesas,groups = "usb1";
+ renesas,function = "usb1";
+ };
};
ðer {
@@ -426,6 +436,18 @@
};
};
+&pci0 {
+ status = "okay";
+ pinctrl-0 = <&usb0_pins>;
+ pinctrl-names = "default";
+};
+
+&pci1 {
+ status = "okay";
+ pinctrl-0 = <&usb1_pins>;
+ pinctrl-names = "default";
+};
+
&pcie_bus_clk {
status = "okay";
};
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 21+ messages in thread* [PATCH v4 2/3] ARM: shmobile: koelsch: enable internal PCI
@ 2014-06-24 18:11 ` Sergei Shtylyov
0 siblings, 0 replies; 21+ messages in thread
From: Sergei Shtylyov @ 2014-06-24 18:11 UTC (permalink / raw)
To: linux-arm-kernel
Enable internal AHB-PCI bridges for the USB EHCI/OHCI controllers attached to
them.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
---
Changes in version 3:
- refreshed the patch.
Changes in version 2:
- refreshed the patch.
arch/arm/boot/dts/r8a7791-koelsch.dts | 22 ++++++++++++++++++++++
1 file changed, 22 insertions(+)
Index: renesas/arch/arm/boot/dts/r8a7791-koelsch.dts
===================================================================
--- renesas.orig/arch/arm/boot/dts/r8a7791-koelsch.dts
+++ renesas/arch/arm/boot/dts/r8a7791-koelsch.dts
@@ -279,6 +279,16 @@
renesas,groups = "i2c6";
renesas,function = "i2c6";
};
+
+ usb0_pins: usb0 {
+ renesas,groups = "usb0";
+ renesas,function = "usb0";
+ };
+
+ usb1_pins: usb1 {
+ renesas,groups = "usb1";
+ renesas,function = "usb1";
+ };
};
ðer {
@@ -426,6 +436,18 @@
};
};
+&pci0 {
+ status = "okay";
+ pinctrl-0 = <&usb0_pins>;
+ pinctrl-names = "default";
+};
+
+&pci1 {
+ status = "okay";
+ pinctrl-0 = <&usb1_pins>;
+ pinctrl-names = "default";
+};
+
&pcie_bus_clk {
status = "okay";
};
^ permalink raw reply [flat|nested] 21+ messages in thread
* [PATCH v4 3/3] ARM: shmobile: henninger: enable internal PCI
2014-06-24 18:07 ` Sergei Shtylyov
(?)
@ 2014-06-24 18:13 ` Sergei Shtylyov
-1 siblings, 0 replies; 21+ messages in thread
From: Sergei Shtylyov @ 2014-06-24 18:13 UTC (permalink / raw)
To: linux-arm-kernel
Enable internal AHB-PCI bridges for the USB EHCI/OHCI controllers attached to
them.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
---
Changes in version 4:
- moved the PCI bridge nodes before PCIe clock/bridge nodes.
Changes in version 3:
- refreshed the patch.
arch/arm/boot/dts/r8a7791-henninger.dts | 22 ++++++++++++++++++++++
1 file changed, 22 insertions(+)
Index: renesas/arch/arm/boot/dts/r8a7791-henninger.dts
=================================--- renesas.orig/arch/arm/boot/dts/r8a7791-henninger.dts
+++ renesas/arch/arm/boot/dts/r8a7791-henninger.dts
@@ -125,6 +125,16 @@
"msiof0_tx";
renesas,function = "msiof0";
};
+
+ usb0_pins: usb0 {
+ renesas,groups = "usb0";
+ renesas,function = "usb0";
+ };
+
+ usb1_pins: usb1 {
+ renesas,groups = "usb1";
+ renesas,function = "usb1";
+ };
};
&scif0 {
@@ -231,6 +241,18 @@
};
};
+&pci0 {
+ status = "okay";
+ pinctrl-0 = <&usb0_pins>;
+ pinctrl-names = "default";
+};
+
+&pci1 {
+ status = "okay";
+ pinctrl-0 = <&usb1_pins>;
+ pinctrl-names = "default";
+};
+
&pcie_bus_clk {
status = "okay";
};
^ permalink raw reply [flat|nested] 21+ messages in thread* [PATCH v4 3/3] ARM: shmobile: henninger: enable internal PCI
@ 2014-06-24 18:13 ` Sergei Shtylyov
0 siblings, 0 replies; 21+ messages in thread
From: Sergei Shtylyov @ 2014-06-24 18:13 UTC (permalink / raw)
To: horms, linux-sh, robh+dt, pawel.moll, mark.rutland,
ijc+devicetree, galak, devicetree
Cc: magnus.damm, linux, linux-arm-kernel
Enable internal AHB-PCI bridges for the USB EHCI/OHCI controllers attached to
them.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
---
Changes in version 4:
- moved the PCI bridge nodes before PCIe clock/bridge nodes.
Changes in version 3:
- refreshed the patch.
arch/arm/boot/dts/r8a7791-henninger.dts | 22 ++++++++++++++++++++++
1 file changed, 22 insertions(+)
Index: renesas/arch/arm/boot/dts/r8a7791-henninger.dts
===================================================================
--- renesas.orig/arch/arm/boot/dts/r8a7791-henninger.dts
+++ renesas/arch/arm/boot/dts/r8a7791-henninger.dts
@@ -125,6 +125,16 @@
"msiof0_tx";
renesas,function = "msiof0";
};
+
+ usb0_pins: usb0 {
+ renesas,groups = "usb0";
+ renesas,function = "usb0";
+ };
+
+ usb1_pins: usb1 {
+ renesas,groups = "usb1";
+ renesas,function = "usb1";
+ };
};
&scif0 {
@@ -231,6 +241,18 @@
};
};
+&pci0 {
+ status = "okay";
+ pinctrl-0 = <&usb0_pins>;
+ pinctrl-names = "default";
+};
+
+&pci1 {
+ status = "okay";
+ pinctrl-0 = <&usb1_pins>;
+ pinctrl-names = "default";
+};
+
&pcie_bus_clk {
status = "okay";
};
^ permalink raw reply [flat|nested] 21+ messages in thread* [PATCH v4 3/3] ARM: shmobile: henninger: enable internal PCI
@ 2014-06-24 18:13 ` Sergei Shtylyov
0 siblings, 0 replies; 21+ messages in thread
From: Sergei Shtylyov @ 2014-06-24 18:13 UTC (permalink / raw)
To: linux-arm-kernel
Enable internal AHB-PCI bridges for the USB EHCI/OHCI controllers attached to
them.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
---
Changes in version 4:
- moved the PCI bridge nodes before PCIe clock/bridge nodes.
Changes in version 3:
- refreshed the patch.
arch/arm/boot/dts/r8a7791-henninger.dts | 22 ++++++++++++++++++++++
1 file changed, 22 insertions(+)
Index: renesas/arch/arm/boot/dts/r8a7791-henninger.dts
===================================================================
--- renesas.orig/arch/arm/boot/dts/r8a7791-henninger.dts
+++ renesas/arch/arm/boot/dts/r8a7791-henninger.dts
@@ -125,6 +125,16 @@
"msiof0_tx";
renesas,function = "msiof0";
};
+
+ usb0_pins: usb0 {
+ renesas,groups = "usb0";
+ renesas,function = "usb0";
+ };
+
+ usb1_pins: usb1 {
+ renesas,groups = "usb1";
+ renesas,function = "usb1";
+ };
};
&scif0 {
@@ -231,6 +241,18 @@
};
};
+&pci0 {
+ status = "okay";
+ pinctrl-0 = <&usb0_pins>;
+ pinctrl-names = "default";
+};
+
+&pci1 {
+ status = "okay";
+ pinctrl-0 = <&usb1_pins>;
+ pinctrl-names = "default";
+};
+
&pcie_bus_clk {
status = "okay";
};
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: [PATCH v4 0/3] Add R8A7791/Koelsch/Henninger board PCI DT support
2014-06-24 18:07 ` Sergei Shtylyov
(?)
@ 2014-06-24 18:22 ` Arnd Bergmann
-1 siblings, 0 replies; 21+ messages in thread
From: Arnd Bergmann @ 2014-06-24 18:22 UTC (permalink / raw)
To: linux-arm-kernel
On Tuesday 24 June 2014 22:07:31 Sergei Shtylyov wrote:
>
> Here's the set of 3 patches against Simon Horman's 'renesas.git' repo,
> 'renesas-devel-v3.16-rc2-20140623' tag. Here we add PCI USB device tree support
> for the R8A7791-based Koelsch and Henninger boards. As the 'pci-rcar-gen2'
> driver device tree support has been merged for 3.16, this patchset can now be
> merged too...
>
> [1/3] ARM: shmobile: r8a7791: add internal PCI bridge nodes
> [2/3] ARM: shmobile: koelsch: enable internal PCI
> [3/3] ARM: shmobile: henninger: enable internal PCI
>
Acked-by: Arnd Bergmann <arnd@arndb.de>
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: [PATCH v4 0/3] Add R8A7791/Koelsch/Henninger board PCI DT support
@ 2014-06-24 18:22 ` Arnd Bergmann
0 siblings, 0 replies; 21+ messages in thread
From: Arnd Bergmann @ 2014-06-24 18:22 UTC (permalink / raw)
To: linux-arm-kernel
Cc: Sergei Shtylyov, horms, linux-sh, robh+dt, pawel.moll,
mark.rutland, ijc+devicetree, galak, devicetree, linux,
magnus.damm
On Tuesday 24 June 2014 22:07:31 Sergei Shtylyov wrote:
>
> Here's the set of 3 patches against Simon Horman's 'renesas.git' repo,
> 'renesas-devel-v3.16-rc2-20140623' tag. Here we add PCI USB device tree support
> for the R8A7791-based Koelsch and Henninger boards. As the 'pci-rcar-gen2'
> driver device tree support has been merged for 3.16, this patchset can now be
> merged too...
>
> [1/3] ARM: shmobile: r8a7791: add internal PCI bridge nodes
> [2/3] ARM: shmobile: koelsch: enable internal PCI
> [3/3] ARM: shmobile: henninger: enable internal PCI
>
Acked-by: Arnd Bergmann <arnd@arndb.de>
^ permalink raw reply [flat|nested] 21+ messages in thread
* [PATCH v4 0/3] Add R8A7791/Koelsch/Henninger board PCI DT support
@ 2014-06-24 18:22 ` Arnd Bergmann
0 siblings, 0 replies; 21+ messages in thread
From: Arnd Bergmann @ 2014-06-24 18:22 UTC (permalink / raw)
To: linux-arm-kernel
On Tuesday 24 June 2014 22:07:31 Sergei Shtylyov wrote:
>
> Here's the set of 3 patches against Simon Horman's 'renesas.git' repo,
> 'renesas-devel-v3.16-rc2-20140623' tag. Here we add PCI USB device tree support
> for the R8A7791-based Koelsch and Henninger boards. As the 'pci-rcar-gen2'
> driver device tree support has been merged for 3.16, this patchset can now be
> merged too...
>
> [1/3] ARM: shmobile: r8a7791: add internal PCI bridge nodes
> [2/3] ARM: shmobile: koelsch: enable internal PCI
> [3/3] ARM: shmobile: henninger: enable internal PCI
>
Acked-by: Arnd Bergmann <arnd@arndb.de>
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: [PATCH v4 0/3] Add R8A7791/Koelsch/Henninger board PCI DT support
2014-06-24 18:22 ` Arnd Bergmann
(?)
@ 2014-07-07 21:21 ` Sergei Shtylyov
-1 siblings, 0 replies; 21+ messages in thread
From: Sergei Shtylyov @ 2014-07-07 21:21 UTC (permalink / raw)
To: linux-arm-kernel
Hello.
On 06/24/2014 10:22 PM, Arnd Bergmann wrote:
>> Here's the set of 3 patches against Simon Horman's 'renesas.git' repo,
>> 'renesas-devel-v3.16-rc2-20140623' tag. Here we add PCI USB device tree support
>> for the R8A7791-based Koelsch and Henninger boards. As the 'pci-rcar-gen2'
>> driver device tree support has been merged for 3.16, this patchset can now be
>> merged too...
>> [1/3] ARM: shmobile: r8a7791: add internal PCI bridge nodes
>> [2/3] ARM: shmobile: koelsch: enable internal PCI
>> [3/3] ARM: shmobile: henninger: enable internal PCI
> Acked-by: Arnd Bergmann <arnd@arndb.de>
Simon, what's up with this series? You've merged analogous series for
R8A7790 but not this one. You followed up to an older version of it, asking me
to re-post when the driver patch gets merged but it already had been merged
already (and this version posted), and I got no reply from you then...
WBR, Sergei
^ permalink raw reply [flat|nested] 21+ messages in thread* Re: [PATCH v4 0/3] Add R8A7791/Koelsch/Henninger board PCI DT support
@ 2014-07-07 21:21 ` Sergei Shtylyov
0 siblings, 0 replies; 21+ messages in thread
From: Sergei Shtylyov @ 2014-07-07 21:21 UTC (permalink / raw)
To: linux-arm-kernel, horms
Cc: Arnd Bergmann, linux-sh, robh+dt, pawel.moll, mark.rutland,
ijc+devicetree, galak, devicetree, linux, magnus.damm
Hello.
On 06/24/2014 10:22 PM, Arnd Bergmann wrote:
>> Here's the set of 3 patches against Simon Horman's 'renesas.git' repo,
>> 'renesas-devel-v3.16-rc2-20140623' tag. Here we add PCI USB device tree support
>> for the R8A7791-based Koelsch and Henninger boards. As the 'pci-rcar-gen2'
>> driver device tree support has been merged for 3.16, this patchset can now be
>> merged too...
>> [1/3] ARM: shmobile: r8a7791: add internal PCI bridge nodes
>> [2/3] ARM: shmobile: koelsch: enable internal PCI
>> [3/3] ARM: shmobile: henninger: enable internal PCI
> Acked-by: Arnd Bergmann <arnd@arndb.de>
Simon, what's up with this series? You've merged analogous series for
R8A7790 but not this one. You followed up to an older version of it, asking me
to re-post when the driver patch gets merged but it already had been merged
already (and this version posted), and I got no reply from you then...
WBR, Sergei
^ permalink raw reply [flat|nested] 21+ messages in thread* [PATCH v4 0/3] Add R8A7791/Koelsch/Henninger board PCI DT support
@ 2014-07-07 21:21 ` Sergei Shtylyov
0 siblings, 0 replies; 21+ messages in thread
From: Sergei Shtylyov @ 2014-07-07 21:21 UTC (permalink / raw)
To: linux-arm-kernel
Hello.
On 06/24/2014 10:22 PM, Arnd Bergmann wrote:
>> Here's the set of 3 patches against Simon Horman's 'renesas.git' repo,
>> 'renesas-devel-v3.16-rc2-20140623' tag. Here we add PCI USB device tree support
>> for the R8A7791-based Koelsch and Henninger boards. As the 'pci-rcar-gen2'
>> driver device tree support has been merged for 3.16, this patchset can now be
>> merged too...
>> [1/3] ARM: shmobile: r8a7791: add internal PCI bridge nodes
>> [2/3] ARM: shmobile: koelsch: enable internal PCI
>> [3/3] ARM: shmobile: henninger: enable internal PCI
> Acked-by: Arnd Bergmann <arnd@arndb.de>
Simon, what's up with this series? You've merged analogous series for
R8A7790 but not this one. You followed up to an older version of it, asking me
to re-post when the driver patch gets merged but it already had been merged
already (and this version posted), and I got no reply from you then...
WBR, Sergei
^ permalink raw reply [flat|nested] 21+ messages in thread* Re: [PATCH v4 0/3] Add R8A7791/Koelsch/Henninger board PCI DT support
2014-07-07 21:21 ` Sergei Shtylyov
(?)
@ 2014-07-08 9:04 ` Simon Horman
-1 siblings, 0 replies; 21+ messages in thread
From: Simon Horman @ 2014-07-08 9:04 UTC (permalink / raw)
To: linux-arm-kernel
On Tue, Jul 08, 2014 at 01:21:50AM +0400, Sergei Shtylyov wrote:
> Hello.
>
> On 06/24/2014 10:22 PM, Arnd Bergmann wrote:
>
> >> Here's the set of 3 patches against Simon Horman's 'renesas.git' repo,
> >>'renesas-devel-v3.16-rc2-20140623' tag. Here we add PCI USB device tree support
> >>for the R8A7791-based Koelsch and Henninger boards. As the 'pci-rcar-gen2'
> >>driver device tree support has been merged for 3.16, this patchset can now be
> >>merged too...
>
> >>[1/3] ARM: shmobile: r8a7791: add internal PCI bridge nodes
> >>[2/3] ARM: shmobile: koelsch: enable internal PCI
> >>[3/3] ARM: shmobile: henninger: enable internal PCI
>
> >Acked-by: Arnd Bergmann <arnd@arndb.de>
>
> Simon, what's up with this series? You've merged analogous series for
> R8A7790 but not this one. You followed up to an older version of it, asking
> me to re-post when the driver patch gets merged but it already had been
> merged already (and this version posted), and I got no reply from you
> then...
Sorry about that and thanks for the reminder.
I have now queued up this series.
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: [PATCH v4 0/3] Add R8A7791/Koelsch/Henninger board PCI DT support
@ 2014-07-08 9:04 ` Simon Horman
0 siblings, 0 replies; 21+ messages in thread
From: Simon Horman @ 2014-07-08 9:04 UTC (permalink / raw)
To: Sergei Shtylyov
Cc: linux-arm-kernel, Arnd Bergmann, linux-sh, robh+dt, pawel.moll,
mark.rutland, ijc+devicetree, galak, devicetree, linux,
magnus.damm
On Tue, Jul 08, 2014 at 01:21:50AM +0400, Sergei Shtylyov wrote:
> Hello.
>
> On 06/24/2014 10:22 PM, Arnd Bergmann wrote:
>
> >> Here's the set of 3 patches against Simon Horman's 'renesas.git' repo,
> >>'renesas-devel-v3.16-rc2-20140623' tag. Here we add PCI USB device tree support
> >>for the R8A7791-based Koelsch and Henninger boards. As the 'pci-rcar-gen2'
> >>driver device tree support has been merged for 3.16, this patchset can now be
> >>merged too...
>
> >>[1/3] ARM: shmobile: r8a7791: add internal PCI bridge nodes
> >>[2/3] ARM: shmobile: koelsch: enable internal PCI
> >>[3/3] ARM: shmobile: henninger: enable internal PCI
>
> >Acked-by: Arnd Bergmann <arnd@arndb.de>
>
> Simon, what's up with this series? You've merged analogous series for
> R8A7790 but not this one. You followed up to an older version of it, asking
> me to re-post when the driver patch gets merged but it already had been
> merged already (and this version posted), and I got no reply from you
> then...
Sorry about that and thanks for the reminder.
I have now queued up this series.
^ permalink raw reply [flat|nested] 21+ messages in thread
* [PATCH v4 0/3] Add R8A7791/Koelsch/Henninger board PCI DT support
@ 2014-07-08 9:04 ` Simon Horman
0 siblings, 0 replies; 21+ messages in thread
From: Simon Horman @ 2014-07-08 9:04 UTC (permalink / raw)
To: linux-arm-kernel
On Tue, Jul 08, 2014 at 01:21:50AM +0400, Sergei Shtylyov wrote:
> Hello.
>
> On 06/24/2014 10:22 PM, Arnd Bergmann wrote:
>
> >> Here's the set of 3 patches against Simon Horman's 'renesas.git' repo,
> >>'renesas-devel-v3.16-rc2-20140623' tag. Here we add PCI USB device tree support
> >>for the R8A7791-based Koelsch and Henninger boards. As the 'pci-rcar-gen2'
> >>driver device tree support has been merged for 3.16, this patchset can now be
> >>merged too...
>
> >>[1/3] ARM: shmobile: r8a7791: add internal PCI bridge nodes
> >>[2/3] ARM: shmobile: koelsch: enable internal PCI
> >>[3/3] ARM: shmobile: henninger: enable internal PCI
>
> >Acked-by: Arnd Bergmann <arnd@arndb.de>
>
> Simon, what's up with this series? You've merged analogous series for
> R8A7790 but not this one. You followed up to an older version of it, asking
> me to re-post when the driver patch gets merged but it already had been
> merged already (and this version posted), and I got no reply from you
> then...
Sorry about that and thanks for the reminder.
I have now queued up this series.
^ permalink raw reply [flat|nested] 21+ messages in thread