* [RFCv2 00/10] add support for ack timeout estimation in ath9k driver
@ 2014-07-13 10:18 ` Lorenzo Bianconi
0 siblings, 0 replies; 28+ messages in thread
From: Lorenzo Bianconi @ 2014-07-13 10:18 UTC (permalink / raw)
To: ath9k-devel; +Cc: linux-wireless, Philippe Duchein
This patchset adds support for estimation of the ack timeout (dynack) in ath9k
driver. Ath9k dynack computes the ack timeout based on ack frame RX timestamp,
TX frame timestamp and frame duration.
Ath9k dynack has been tested in indoor environment using AR9223/AR9280 chipset
(running 3.16.0-rc4 kernel) and on 9Km PtoP link using AR9280 chipset
(running OpenWRT trunk, compat-wireless-2014-05-22)
Changes since RFCv1:
- use ISC license instead of GPLv2 one
- use an inline method instead of a macro for EWMA calculation
- use powers of two weights in EWMA calculation
- fix typos
- add ath_dynack_node_init/ath_dynack_node_deinit methods
- use different logic to enable/disable dynack processing
Lorenzo Bianconi (10):
ath9k: export methods related to ack timeout estimation
ath9k: add duration field to ath_tx_status
ath9k: add dynamic ack timeout estimation
ath9k: add config for (en|dis)abling ack timeout estimation
ath9k: do not overwrite ack timeout estimation
ath9k: add sampling methods for (tx|rx) timestamp
ath9k: enable control frame reception
ath9k: add debugfs support for dynack
ath9k: disable dynack algorithm when coverage class is set
ath9k: initialize ath_node linked list
drivers/net/wireless/ath/ath.h | 2 +
drivers/net/wireless/ath/ath9k/Kconfig | 7 +
drivers/net/wireless/ath/ath9k/Makefile | 3 +
drivers/net/wireless/ath/ath9k/ar9002_mac.c | 7 +
drivers/net/wireless/ath/ath9k/ar9003_mac.c | 9 +
drivers/net/wireless/ath/ath9k/ath9k.h | 3 +
drivers/net/wireless/ath/ath9k/debug.c | 82 +++++++
drivers/net/wireless/ath/ath9k/dynack.c | 348 ++++++++++++++++++++++++++++
drivers/net/wireless/ath/ath9k/dynack.h | 96 ++++++++
drivers/net/wireless/ath/ath9k/hw.c | 16 +-
drivers/net/wireless/ath/ath9k/hw.h | 7 +
drivers/net/wireless/ath/ath9k/mac.h | 1 +
drivers/net/wireless/ath/ath9k/main.c | 5 +
drivers/net/wireless/ath/ath9k/recv.c | 7 +-
drivers/net/wireless/ath/ath9k/xmit.c | 5 +
15 files changed, 594 insertions(+), 4 deletions(-)
create mode 100644 drivers/net/wireless/ath/ath9k/dynack.c
create mode 100644 drivers/net/wireless/ath/ath9k/dynack.h
--
1.9.1
^ permalink raw reply [flat|nested] 28+ messages in thread
* [ath9k-devel] [RFCv2 01/10] ath9k: export methods related to ack timeout estimation
2014-07-13 10:18 ` Lorenzo Bianconi
@ 2014-07-13 10:18 ` Lorenzo Bianconi
-1 siblings, 0 replies; 28+ messages in thread
From: Lorenzo Bianconi @ 2014-07-13 10:18 UTC (permalink / raw)
To: ath9k-devel
Remove static keyword and export ath9k_hw_setslottime(),
ath9k_hw_set_ack_timeout() and ath9k_hw_set_cts_timeout() in hw.h. These
methods will be used in dynamic ack timeout estimation
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com>
---
drivers/net/wireless/ath/ath9k/hw.c | 6 +++---
drivers/net/wireless/ath/ath9k/hw.h | 4 ++++
2 files changed, 7 insertions(+), 3 deletions(-)
diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c
index fd0158f..e88896c 100644
--- a/drivers/net/wireless/ath/ath9k/hw.c
+++ b/drivers/net/wireless/ath/ath9k/hw.c
@@ -935,21 +935,21 @@ static void ath9k_hw_set_sifs_time(struct ath_hw *ah, u32 us)
REG_WRITE(ah, AR_D_GBL_IFS_SIFS, val);
}
-static void ath9k_hw_setslottime(struct ath_hw *ah, u32 us)
+void ath9k_hw_setslottime(struct ath_hw *ah, u32 us)
{
u32 val = ath9k_hw_mac_to_clks(ah, us);
val = min(val, (u32) 0xFFFF);
REG_WRITE(ah, AR_D_GBL_IFS_SLOT, val);
}
-static void ath9k_hw_set_ack_timeout(struct ath_hw *ah, u32 us)
+void ath9k_hw_set_ack_timeout(struct ath_hw *ah, u32 us)
{
u32 val = ath9k_hw_mac_to_clks(ah, us);
val = min(val, (u32) MS(0xFFFFFFFF, AR_TIME_OUT_ACK));
REG_RMW_FIELD(ah, AR_TIME_OUT, AR_TIME_OUT_ACK, val);
}
-static void ath9k_hw_set_cts_timeout(struct ath_hw *ah, u32 us)
+void ath9k_hw_set_cts_timeout(struct ath_hw *ah, u32 us)
{
u32 val = ath9k_hw_mac_to_clks(ah, us);
val = min(val, (u32) MS(0xFFFFFFFF, AR_TIME_OUT_CTS));
diff --git a/drivers/net/wireless/ath/ath9k/hw.h b/drivers/net/wireless/ath/ath9k/hw.h
index 51b4ebe..f36d971 100644
--- a/drivers/net/wireless/ath/ath9k/hw.h
+++ b/drivers/net/wireless/ath/ath9k/hw.h
@@ -1080,6 +1080,10 @@ void ar9002_hw_load_ani_reg(struct ath_hw *ah, struct ath9k_channel *chan);
void ath9k_ani_reset(struct ath_hw *ah, bool is_scanning);
void ath9k_hw_ani_monitor(struct ath_hw *ah, struct ath9k_channel *chan);
+void ath9k_hw_set_ack_timeout(struct ath_hw *ah, u32 us);
+void ath9k_hw_set_cts_timeout(struct ath_hw *ah, u32 us);
+void ath9k_hw_setslottime(struct ath_hw *ah, u32 us);
+
#ifdef CONFIG_ATH9K_BTCOEX_SUPPORT
static inline bool ath9k_hw_btcoex_is_enabled(struct ath_hw *ah)
{
--
1.9.1
^ permalink raw reply related [flat|nested] 28+ messages in thread* [RFCv2 01/10] ath9k: export methods related to ack timeout estimation
@ 2014-07-13 10:18 ` Lorenzo Bianconi
0 siblings, 0 replies; 28+ messages in thread
From: Lorenzo Bianconi @ 2014-07-13 10:18 UTC (permalink / raw)
To: ath9k-devel; +Cc: linux-wireless, Philippe Duchein
Remove static keyword and export ath9k_hw_setslottime(),
ath9k_hw_set_ack_timeout() and ath9k_hw_set_cts_timeout() in hw.h. These
methods will be used in dynamic ack timeout estimation
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com>
---
drivers/net/wireless/ath/ath9k/hw.c | 6 +++---
drivers/net/wireless/ath/ath9k/hw.h | 4 ++++
2 files changed, 7 insertions(+), 3 deletions(-)
diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c
index fd0158f..e88896c 100644
--- a/drivers/net/wireless/ath/ath9k/hw.c
+++ b/drivers/net/wireless/ath/ath9k/hw.c
@@ -935,21 +935,21 @@ static void ath9k_hw_set_sifs_time(struct ath_hw *ah, u32 us)
REG_WRITE(ah, AR_D_GBL_IFS_SIFS, val);
}
-static void ath9k_hw_setslottime(struct ath_hw *ah, u32 us)
+void ath9k_hw_setslottime(struct ath_hw *ah, u32 us)
{
u32 val = ath9k_hw_mac_to_clks(ah, us);
val = min(val, (u32) 0xFFFF);
REG_WRITE(ah, AR_D_GBL_IFS_SLOT, val);
}
-static void ath9k_hw_set_ack_timeout(struct ath_hw *ah, u32 us)
+void ath9k_hw_set_ack_timeout(struct ath_hw *ah, u32 us)
{
u32 val = ath9k_hw_mac_to_clks(ah, us);
val = min(val, (u32) MS(0xFFFFFFFF, AR_TIME_OUT_ACK));
REG_RMW_FIELD(ah, AR_TIME_OUT, AR_TIME_OUT_ACK, val);
}
-static void ath9k_hw_set_cts_timeout(struct ath_hw *ah, u32 us)
+void ath9k_hw_set_cts_timeout(struct ath_hw *ah, u32 us)
{
u32 val = ath9k_hw_mac_to_clks(ah, us);
val = min(val, (u32) MS(0xFFFFFFFF, AR_TIME_OUT_CTS));
diff --git a/drivers/net/wireless/ath/ath9k/hw.h b/drivers/net/wireless/ath/ath9k/hw.h
index 51b4ebe..f36d971 100644
--- a/drivers/net/wireless/ath/ath9k/hw.h
+++ b/drivers/net/wireless/ath/ath9k/hw.h
@@ -1080,6 +1080,10 @@ void ar9002_hw_load_ani_reg(struct ath_hw *ah, struct ath9k_channel *chan);
void ath9k_ani_reset(struct ath_hw *ah, bool is_scanning);
void ath9k_hw_ani_monitor(struct ath_hw *ah, struct ath9k_channel *chan);
+void ath9k_hw_set_ack_timeout(struct ath_hw *ah, u32 us);
+void ath9k_hw_set_cts_timeout(struct ath_hw *ah, u32 us);
+void ath9k_hw_setslottime(struct ath_hw *ah, u32 us);
+
#ifdef CONFIG_ATH9K_BTCOEX_SUPPORT
static inline bool ath9k_hw_btcoex_is_enabled(struct ath_hw *ah)
{
--
1.9.1
^ permalink raw reply related [flat|nested] 28+ messages in thread
* [ath9k-devel] [RFCv2 02/10] ath9k: add duration field to ath_tx_status
2014-07-13 10:18 ` Lorenzo Bianconi
@ 2014-07-13 10:18 ` Lorenzo Bianconi
-1 siblings, 0 replies; 28+ messages in thread
From: Lorenzo Bianconi @ 2014-07-13 10:18 UTC (permalink / raw)
To: ath9k-devel
Add duration field to ath_tx_status in order to report frame duration for each
entry in multi-retry chain. These fields will be used in dynamic ack timeout
processing
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com>
---
drivers/net/wireless/ath/ath9k/ar9002_mac.c | 7 +++++++
drivers/net/wireless/ath/ath9k/ar9003_mac.c | 9 +++++++++
drivers/net/wireless/ath/ath9k/mac.h | 1 +
3 files changed, 17 insertions(+)
diff --git a/drivers/net/wireless/ath/ath9k/ar9002_mac.c b/drivers/net/wireless/ath/ath9k/ar9002_mac.c
index 741b38d..b1d8d0e 100644
--- a/drivers/net/wireless/ath/ath9k/ar9002_mac.c
+++ b/drivers/net/wireless/ath/ath9k/ar9002_mac.c
@@ -377,6 +377,13 @@ static int ar9002_hw_proc_txdesc(struct ath_hw *ah, void *ds,
ts->evm1 = ads->AR_TxEVM1;
ts->evm2 = ads->AR_TxEVM2;
+ status = ACCESS_ONCE(ads->ds_ctl4);
+ ts->duration[0] = MS(status, AR_PacketDur0);
+ ts->duration[1] = MS(status, AR_PacketDur1);
+ status = ACCESS_ONCE(ads->ds_ctl5);
+ ts->duration[2] = MS(status, AR_PacketDur2);
+ ts->duration[3] = MS(status, AR_PacketDur3);
+
return 0;
}
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_mac.c b/drivers/net/wireless/ath/ath9k/ar9003_mac.c
index 729ffbf..d261c6e 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_mac.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_mac.c
@@ -351,9 +351,11 @@ static int ar9003_hw_proc_txdesc(struct ath_hw *ah, void *ds,
struct ath_tx_status *ts)
{
struct ar9003_txs *ads;
+ struct ar9003_txc *adc;
u32 status;
ads = &ah->ts_ring[ah->ts_tail];
+ adc = (struct ar9003_txc *)ads;
status = ACCESS_ONCE(ads->status8);
if ((status & AR_TxDone) == 0)
@@ -422,6 +424,13 @@ static int ar9003_hw_proc_txdesc(struct ath_hw *ah, void *ds,
ts->ts_rssi_ext1 = MS(status, AR_TxRSSIAnt11);
ts->ts_rssi_ext2 = MS(status, AR_TxRSSIAnt12);
+ status = ACCESS_ONCE(adc->ctl15);
+ ts->duration[0] = MS(status, AR_PacketDur0);
+ ts->duration[1] = MS(status, AR_PacketDur1);
+ status = ACCESS_ONCE(adc->ctl16);
+ ts->duration[2] = MS(status, AR_PacketDur2);
+ ts->duration[3] = MS(status, AR_PacketDur3);
+
memset(ads, 0, sizeof(*ads));
return 0;
diff --git a/drivers/net/wireless/ath/ath9k/mac.h b/drivers/net/wireless/ath/ath9k/mac.h
index da76867..06efbe8 100644
--- a/drivers/net/wireless/ath/ath9k/mac.h
+++ b/drivers/net/wireless/ath/ath9k/mac.h
@@ -121,6 +121,7 @@ struct ath_tx_status {
u32 evm0;
u32 evm1;
u32 evm2;
+ u32 duration[4];
};
struct ath_rx_status {
--
1.9.1
^ permalink raw reply related [flat|nested] 28+ messages in thread* [RFCv2 02/10] ath9k: add duration field to ath_tx_status
@ 2014-07-13 10:18 ` Lorenzo Bianconi
0 siblings, 0 replies; 28+ messages in thread
From: Lorenzo Bianconi @ 2014-07-13 10:18 UTC (permalink / raw)
To: ath9k-devel; +Cc: linux-wireless, Philippe Duchein
Add duration field to ath_tx_status in order to report frame duration for each
entry in multi-retry chain. These fields will be used in dynamic ack timeout
processing
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com>
---
drivers/net/wireless/ath/ath9k/ar9002_mac.c | 7 +++++++
drivers/net/wireless/ath/ath9k/ar9003_mac.c | 9 +++++++++
drivers/net/wireless/ath/ath9k/mac.h | 1 +
3 files changed, 17 insertions(+)
diff --git a/drivers/net/wireless/ath/ath9k/ar9002_mac.c b/drivers/net/wireless/ath/ath9k/ar9002_mac.c
index 741b38d..b1d8d0e 100644
--- a/drivers/net/wireless/ath/ath9k/ar9002_mac.c
+++ b/drivers/net/wireless/ath/ath9k/ar9002_mac.c
@@ -377,6 +377,13 @@ static int ar9002_hw_proc_txdesc(struct ath_hw *ah, void *ds,
ts->evm1 = ads->AR_TxEVM1;
ts->evm2 = ads->AR_TxEVM2;
+ status = ACCESS_ONCE(ads->ds_ctl4);
+ ts->duration[0] = MS(status, AR_PacketDur0);
+ ts->duration[1] = MS(status, AR_PacketDur1);
+ status = ACCESS_ONCE(ads->ds_ctl5);
+ ts->duration[2] = MS(status, AR_PacketDur2);
+ ts->duration[3] = MS(status, AR_PacketDur3);
+
return 0;
}
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_mac.c b/drivers/net/wireless/ath/ath9k/ar9003_mac.c
index 729ffbf..d261c6e 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_mac.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_mac.c
@@ -351,9 +351,11 @@ static int ar9003_hw_proc_txdesc(struct ath_hw *ah, void *ds,
struct ath_tx_status *ts)
{
struct ar9003_txs *ads;
+ struct ar9003_txc *adc;
u32 status;
ads = &ah->ts_ring[ah->ts_tail];
+ adc = (struct ar9003_txc *)ads;
status = ACCESS_ONCE(ads->status8);
if ((status & AR_TxDone) == 0)
@@ -422,6 +424,13 @@ static int ar9003_hw_proc_txdesc(struct ath_hw *ah, void *ds,
ts->ts_rssi_ext1 = MS(status, AR_TxRSSIAnt11);
ts->ts_rssi_ext2 = MS(status, AR_TxRSSIAnt12);
+ status = ACCESS_ONCE(adc->ctl15);
+ ts->duration[0] = MS(status, AR_PacketDur0);
+ ts->duration[1] = MS(status, AR_PacketDur1);
+ status = ACCESS_ONCE(adc->ctl16);
+ ts->duration[2] = MS(status, AR_PacketDur2);
+ ts->duration[3] = MS(status, AR_PacketDur3);
+
memset(ads, 0, sizeof(*ads));
return 0;
diff --git a/drivers/net/wireless/ath/ath9k/mac.h b/drivers/net/wireless/ath/ath9k/mac.h
index da76867..06efbe8 100644
--- a/drivers/net/wireless/ath/ath9k/mac.h
+++ b/drivers/net/wireless/ath/ath9k/mac.h
@@ -121,6 +121,7 @@ struct ath_tx_status {
u32 evm0;
u32 evm1;
u32 evm2;
+ u32 duration[4];
};
struct ath_rx_status {
--
1.9.1
^ permalink raw reply related [flat|nested] 28+ messages in thread
* [ath9k-devel] [RFCv2 03/10] ath9k: add dynamic ack timeout estimation
2014-07-13 10:18 ` Lorenzo Bianconi
@ 2014-07-13 10:18 ` Lorenzo Bianconi
-1 siblings, 0 replies; 28+ messages in thread
From: Lorenzo Bianconi @ 2014-07-13 10:18 UTC (permalink / raw)
To: ath9k-devel
Add dynamic ack timeout estimation algorithm based on ack frame RX timestamp,
TX frame timestamp and frame duration.
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com>
Tested-by: Philippe Duchein <wireless-dev@duchein.net>
---
drivers/net/wireless/ath/ath.h | 2 +
drivers/net/wireless/ath/ath9k/ath9k.h | 3 +
drivers/net/wireless/ath/ath9k/dynack.c | 348 ++++++++++++++++++++++++++++++++
drivers/net/wireless/ath/ath9k/dynack.h | 96 +++++++++
drivers/net/wireless/ath/ath9k/hw.c | 2 +
drivers/net/wireless/ath/ath9k/hw.h | 3 +
6 files changed, 454 insertions(+)
create mode 100644 drivers/net/wireless/ath/ath9k/dynack.c
create mode 100644 drivers/net/wireless/ath/ath9k/dynack.h
diff --git a/drivers/net/wireless/ath/ath.h b/drivers/net/wireless/ath/ath.h
index fd9e530..4e51072 100644
--- a/drivers/net/wireless/ath/ath.h
+++ b/drivers/net/wireless/ath/ath.h
@@ -234,6 +234,7 @@ void ath_printk(const char *level, const struct ath_common *common,
* AR9462.
* @ATH_DBG_DFS: radar datection
* @ATH_DBG_WOW: Wake on Wireless
+ * @ATH_DBG_DYNACK: dynack handling
* @ATH_DBG_ANY: enable all debugging
*
* The debug level is used to control the amount and type of debugging output
@@ -261,6 +262,7 @@ enum ATH_DEBUG {
ATH_DBG_MCI = 0x00008000,
ATH_DBG_DFS = 0x00010000,
ATH_DBG_WOW = 0x00020000,
+ ATH_DBG_DYNACK = 0x00040000,
ATH_DBG_ANY = 0xffffffff
};
diff --git a/drivers/net/wireless/ath/ath9k/ath9k.h b/drivers/net/wireless/ath/ath9k/ath9k.h
index 11b5e4d..65a2587 100644
--- a/drivers/net/wireless/ath/ath9k/ath9k.h
+++ b/drivers/net/wireless/ath/ath9k/ath9k.h
@@ -272,6 +272,9 @@ struct ath_node {
struct ath_rx_rate_stats rx_rate_stats;
#endif
u8 key_idx[4];
+
+ u32 ackto;
+ struct list_head list;
};
struct ath_tx_control {
diff --git a/drivers/net/wireless/ath/ath9k/dynack.c b/drivers/net/wireless/ath/ath9k/dynack.c
new file mode 100644
index 0000000..652a4fb
--- /dev/null
+++ b/drivers/net/wireless/ath/ath9k/dynack.c
@@ -0,0 +1,348 @@
+/*
+ * Copyright (c) 2014, Lorenzo Bianconi <lorenzo.bianconi83@gmail.com>
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include "ath9k.h"
+#include "hw.h"
+#include "dynack.h"
+
+#define COMPUTE_TO (5 * HZ)
+#define LATEACK_DELAY (10 * HZ)
+#define LATEACK_TO 256
+#define MAX_DELAY 300
+#define EWMA_LEVEL 96
+#define EWMA_DIV 128
+
+/**
+ * ath_dynack_ewma - EWMA (Exponentially Weighted Moving Average) calculation
+ *
+ */
+static inline u32 ath_dynack_ewma(u32 old, u32 new)
+{
+ return (new * (EWMA_DIV - EWMA_LEVEL) + old * EWMA_LEVEL) / EWMA_DIV;
+}
+
+/**
+ * ath_dynack_get_sifs - get sifs time based on phy used
+ * @ah: ath hw
+ * @phy: phy used
+ *
+ */
+static inline u32 ath_dynack_get_sifs(struct ath_hw *ah, int phy)
+{
+ u32 sifs = CCK_SIFS_TIME;
+
+ if (phy == WLAN_RC_PHY_OFDM) {
+ if (IS_CHAN_QUARTER_RATE(ah->curchan))
+ sifs = OFDM_SIFS_TIME_QUARTER;
+ else if (IS_CHAN_HALF_RATE(ah->curchan))
+ sifs = OFDM_SIFS_TIME_HALF;
+ else
+ sifs = OFDM_SIFS_TIME;
+ }
+ return sifs;
+}
+
+static inline bool ath_dynack_bssidmask(struct ath_hw *ah, const u8 *mac)
+{
+ int i;
+ struct ath_common *common = ath9k_hw_common(ah);
+
+ for (i = 0; i < ETH_ALEN; i++) {
+ if ((common->macaddr[i] & common->bssidmask[i]) !=
+ (mac[i] & common->bssidmask[i]))
+ return false;
+ }
+
+ return true;
+}
+
+/**
+ * ath_dynack_compute_ackto - compute ack timeout based on sta timeout
+ * @ah: ath hw
+ *
+ * should be called while holding qlock
+ */
+static void ath_dynack_compute_ackto(struct ath_hw *ah)
+{
+ struct ath_node *an;
+ u32 to = 0;
+ struct ath_dynack *da = &ah->dynack;
+ struct ath_common *common = ath9k_hw_common(ah);
+
+ list_for_each_entry(an, &da->nodes, list)
+ if (an->ackto > to)
+ to = an->ackto;
+
+ if (to && da->ackto != to) {
+ u32 slottime;
+
+ slottime = (to - 3) / 2;
+ da->ackto = to;
+ ath_dbg(common, DYNACK, "ack timeout %u slottime %u\n",
+ da->ackto, slottime);
+ ath9k_hw_setslottime(ah, slottime);
+ ath9k_hw_set_ack_timeout(ah, da->ackto);
+ ath9k_hw_set_cts_timeout(ah, da->ackto);
+ }
+}
+
+/**
+ * ath_dynack_compute_to - compute ack timeout
+ * @ah: ath hw
+ *
+ * should be called while holding qlock
+ */
+static void ath_dynack_compute_to(struct ath_hw *ah)
+{
+ u32 ackto, ack_ts;
+ u8 *dst, *src;
+ struct ieee80211_sta *sta;
+ struct ath_node *an;
+ struct ts_info *st_ts;
+ struct ath_dynack *da = &ah->dynack;
+
+ rcu_read_lock();
+
+ while (da->st_rbf.h_rb != da->st_rbf.t_rb &&
+ da->ack_rbf.h_rb != da->ack_rbf.t_rb) {
+ ack_ts = da->ack_rbf.tstamp[da->ack_rbf.h_rb];
+ st_ts = &da->st_rbf.ts[da->st_rbf.h_rb];
+ dst = da->st_rbf.addr[da->st_rbf.h_rb].h_dest;
+ src = da->st_rbf.addr[da->st_rbf.h_rb].h_src;
+
+ ath_dbg(ath9k_hw_common(ah), DYNACK,
+ "ack_ts %u st_ts %u st_dur %u [%u-%u]\n",
+ ack_ts, st_ts->tstamp, st_ts->dur,
+ da->ack_rbf.h_rb, da->st_rbf.h_rb);
+
+ if (ack_ts > st_ts->tstamp + st_ts->dur) {
+ ackto = ack_ts - st_ts->tstamp - st_ts->dur;
+
+ if (ackto < MAX_DELAY) {
+ sta = ieee80211_find_sta_by_ifaddr(ah->hw, dst,
+ src);
+ if (sta) {
+ an = (struct ath_node *)sta->drv_priv;
+ an->ackto = ath_dynack_ewma(an->ackto,
+ ackto);
+ ath_dbg(ath9k_hw_common(ah), DYNACK,
+ "%pM to %u\n", dst, an->ackto);
+ if (time_is_before_jiffies(da->lto)) {
+ ath_dynack_compute_ackto(ah);
+ da->lto = jiffies + COMPUTE_TO;
+ }
+ }
+ INCR(da->ack_rbf.h_rb, ATH_DYN_BUF);
+ }
+ INCR(da->st_rbf.h_rb, ATH_DYN_BUF);
+ } else {
+ INCR(da->ack_rbf.h_rb, ATH_DYN_BUF);
+ }
+ }
+
+ rcu_read_unlock();
+}
+
+/**
+ * ath_dynack_sample_tx_ts - status ts sampling method
+ * @ah: ath hw
+ * @skb: socket buffer
+ * @ts: tx status info
+ *
+ */
+void ath_dynack_sample_tx_ts(struct ath_hw *ah, struct sk_buff *skb,
+ struct ath_tx_status *ts)
+{
+ u8 ridx;
+ struct ieee80211_hdr *hdr;
+ struct ath_dynack *da = &ah->dynack;
+ struct ath_common *common = ath9k_hw_common(ah);
+ struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
+
+ if ((info->flags & IEEE80211_TX_CTL_NO_ACK) || !da->enabled)
+ return;
+
+ spin_lock_bh(&da->qlock);
+
+ hdr = (struct ieee80211_hdr *)skb->data;
+
+ /* late ack */
+ if (ts->ts_status & ATH9K_TXERR_XRETRY) {
+ if (ieee80211_is_assoc_req(hdr->frame_control) ||
+ ieee80211_is_assoc_resp(hdr->frame_control)) {
+ ath_dbg(common, DYNACK, "late ack\n");
+ ath9k_hw_setslottime(ah, (LATEACK_TO - 3) / 2);
+ ath9k_hw_set_ack_timeout(ah, LATEACK_TO);
+ ath9k_hw_set_cts_timeout(ah, LATEACK_TO);
+ da->lto = jiffies + LATEACK_DELAY;
+ }
+
+ spin_unlock_bh(&da->qlock);
+ return;
+ }
+
+ ridx = ts->ts_rateindex;
+
+ da->st_rbf.ts[da->st_rbf.t_rb].tstamp = ts->ts_tstamp;
+ da->st_rbf.ts[da->st_rbf.t_rb].dur = ts->duration[ts->ts_rateindex];
+ ether_addr_copy(da->st_rbf.addr[da->st_rbf.t_rb].h_dest, hdr->addr1);
+ ether_addr_copy(da->st_rbf.addr[da->st_rbf.t_rb].h_src, hdr->addr2);
+
+ if (!(info->status.rates[ridx].flags & IEEE80211_TX_RC_MCS)) {
+ u32 phy, sifs;
+ const struct ieee80211_rate *rate;
+ struct ieee80211_tx_rate *rates = info->status.rates;
+
+ rate = &common->sbands[info->band].bitrates[rates[ridx].idx];
+ if (info->band == IEEE80211_BAND_2GHZ &&
+ !(rate->flags & IEEE80211_RATE_ERP_G))
+ phy = WLAN_RC_PHY_CCK;
+ else
+ phy = WLAN_RC_PHY_OFDM;
+
+ sifs = ath_dynack_get_sifs(ah, phy);
+ da->st_rbf.ts[da->st_rbf.t_rb].dur -= sifs;
+ }
+
+ ath_dbg(common, DYNACK, "{%pM} tx sample %u [dur %u][h %u-t %u]\n",
+ hdr->addr1, da->st_rbf.ts[da->st_rbf.t_rb].tstamp,
+ da->st_rbf.ts[da->st_rbf.t_rb].dur, da->st_rbf.h_rb,
+ (da->st_rbf.t_rb + 1) % ATH_DYN_BUF);
+
+ INCR(da->st_rbf.t_rb, ATH_DYN_BUF);
+ if (da->st_rbf.t_rb == da->st_rbf.h_rb)
+ INCR(da->st_rbf.h_rb, ATH_DYN_BUF);
+
+ ath_dynack_compute_to(ah);
+
+ spin_unlock_bh(&da->qlock);
+}
+EXPORT_SYMBOL(ath_dynack_sample_tx_ts);
+
+/**
+ * ath_dynack_sample_ack_ts - ack ts sampling method
+ * @ah: ath hw
+ * @skb: socket buffer
+ * @ts: rx timestamp
+ *
+ */
+void ath_dynack_sample_ack_ts(struct ath_hw *ah, struct sk_buff *skb,
+ u32 ts)
+{
+ struct ath_dynack *da = &ah->dynack;
+ struct ath_common *common = ath9k_hw_common(ah);
+ struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
+
+ if (!ath_dynack_bssidmask(ah, hdr->addr1) || !da->enabled)
+ return;
+
+ spin_lock_bh(&da->qlock);
+ da->ack_rbf.tstamp[da->ack_rbf.t_rb] = ts;
+
+ ath_dbg(common, DYNACK, "rx sample %u [h %u-t %u]\n",
+ da->ack_rbf.tstamp[da->ack_rbf.t_rb],
+ da->ack_rbf.h_rb, (da->ack_rbf.t_rb + 1) % ATH_DYN_BUF);
+
+ INCR(da->ack_rbf.t_rb, ATH_DYN_BUF);
+ if (da->ack_rbf.t_rb == da->ack_rbf.h_rb)
+ INCR(da->ack_rbf.h_rb, ATH_DYN_BUF);
+
+ ath_dynack_compute_to(ah);
+
+ spin_unlock_bh(&da->qlock);
+}
+EXPORT_SYMBOL(ath_dynack_sample_ack_ts);
+
+/**
+ * ath_dynack_node_init - init ath_node related info
+ * @ah: ath hw
+ * @an: ath node
+ *
+ */
+void ath_dynack_node_init(struct ath_hw *ah, struct ath_node *an)
+{
+ /* ackto = slottime + sifs + air delay */
+ u32 ackto = ATH9K_SLOT_TIME_9 + 16 + 64;
+ struct ath_dynack *da = &ah->dynack;
+
+ an->ackto = ackto;
+
+ spin_lock(&da->qlock);
+ list_add_tail(&an->list, &da->nodes);
+ spin_unlock(&da->qlock);
+}
+EXPORT_SYMBOL(ath_dynack_node_init);
+
+/**
+ * ath_dynack_node_deinit - deinit ath_node related info
+ * @ah: ath hw
+ * @an: ath node
+ *
+ */
+void ath_dynack_node_deinit(struct ath_hw *ah, struct ath_node *an)
+{
+ struct ath_dynack *da = &ah->dynack;
+
+ spin_lock(&da->qlock);
+ list_del(&an->list);
+ spin_unlock(&da->qlock);
+}
+EXPORT_SYMBOL(ath_dynack_node_deinit);
+
+/**
+ * ath_dynack_reset - reset dynack processing
+ * @ah: ath hw
+ *
+ */
+void ath_dynack_reset(struct ath_hw *ah)
+{
+ /* ackto = slottime + sifs + air delay */
+ u32 ackto = ATH9K_SLOT_TIME_9 + 16 + 64;
+ struct ath_dynack *da = &ah->dynack;
+
+ da->enabled = true;
+ da->lto = jiffies;
+ da->ackto = ackto;
+
+ da->st_rbf.t_rb = 0;
+ da->st_rbf.h_rb = 0;
+ da->ack_rbf.t_rb = 0;
+ da->ack_rbf.h_rb = 0;
+
+ /* init acktimeout */
+ ath9k_hw_setslottime(ah, (ackto - 3) / 2);
+ ath9k_hw_set_ack_timeout(ah, ackto);
+ ath9k_hw_set_cts_timeout(ah, ackto);
+}
+EXPORT_SYMBOL(ath_dynack_reset);
+
+/**
+ * ath_dynack_init - init dynack data structure
+ * @ah: ath hw
+ *
+ */
+void ath_dynack_init(struct ath_hw *ah)
+{
+ struct ath_dynack *da = &ah->dynack;
+
+ memset(da, 0, sizeof(struct ath_dynack));
+
+ spin_lock_init(&da->qlock);
+ INIT_LIST_HEAD(&da->nodes);
+
+ ath_dynack_reset(ah);
+}
+
diff --git a/drivers/net/wireless/ath/ath9k/dynack.h b/drivers/net/wireless/ath/ath9k/dynack.h
new file mode 100644
index 0000000..b1a03fa
--- /dev/null
+++ b/drivers/net/wireless/ath/ath9k/dynack.h
@@ -0,0 +1,96 @@
+/*
+ * Copyright (c) 2014, Lorenzo Bianconi <lorenzo.bianconi83@gmail.com>
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#ifndef DYNACK_H
+#define DYNACK_H
+
+#define ATH_DYN_BUF 64
+
+struct ath_hw;
+struct ath_node;
+
+/**
+ * ath_dyn_rxbuf - ack frame ring buffer
+ */
+struct ath_dyn_rxbuf {
+ u16 h_rb, t_rb;
+ u32 tstamp[ATH_DYN_BUF];
+};
+
+struct ts_info {
+ u32 tstamp;
+ u32 dur;
+};
+
+struct haddr_pair {
+ u8 h_dest[ETH_ALEN];
+ u8 h_src[ETH_ALEN];
+};
+/**
+ * ath_dyn_txbuf - tx frame ring buffer
+ */
+struct ath_dyn_txbuf {
+ u16 h_rb, t_rb;
+ struct haddr_pair addr[ATH_DYN_BUF];
+ struct ts_info ts[ATH_DYN_BUF];
+};
+
+/**
+ * ath_dynack - dyn ack processing info
+ * @enabled: enable dyn ack processing
+ * @ackto: current ack timeout
+ * @lto: last ack timeout computation
+ * @nodes: ath_node linked list
+ * @qlock: ts queue spinlock
+ * @ack_rbf: ack ts ring buffer
+ * @st_rbf: status ts ring buffer
+ */
+struct ath_dynack {
+ bool enabled;
+ int ackto;
+ unsigned long lto;
+
+ struct list_head nodes;
+
+ /* protect timestamp queue access */
+ spinlock_t qlock;
+ struct ath_dyn_rxbuf ack_rbf;
+ struct ath_dyn_txbuf st_rbf;
+};
+
+#if defined(CONFIG_ATH9K_DYNACK)
+void ath_dynack_reset(struct ath_hw *ah);
+void ath_dynack_node_init(struct ath_hw *ah, struct ath_node *an);
+void ath_dynack_node_deinit(struct ath_hw *ah, struct ath_node *an);
+void ath_dynack_init(struct ath_hw *ah);
+void ath_dynack_sample_ack_ts(struct ath_hw *ah, struct sk_buff *skb, u32 ts);
+void ath_dynack_sample_tx_ts(struct ath_hw *ah, struct sk_buff *skb,
+ struct ath_tx_status *ts);
+#else
+static inline void ath_dynack_init(struct ath_hw *ah) {}
+static inline void ath_dynack_reset(struct ath_hw *ah) {}
+static inline void ath_dynack_node_init(struct ath_hw *ah,
+ struct ath_node *an) {}
+static inline void ath_dynack_node_deinit(struct ath_hw *ah,
+ struct ath_node *an) {}
+static inline void ath_dynack_sample_ack_ts(struct ath_hw *ah,
+ struct sk_buff *skb, u32 ts) {}
+static inline void ath_dynack_sample_tx_ts(struct ath_hw *ah,
+ struct sk_buff *skb,
+ struct ath_tx_status *ts) {}
+#endif
+
+#endif /* DYNACK_H */
diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c
index e88896c..9a6b113 100644
--- a/drivers/net/wireless/ath/ath9k/hw.c
+++ b/drivers/net/wireless/ath/ath9k/hw.c
@@ -647,6 +647,8 @@ int ath9k_hw_init(struct ath_hw *ah)
return ret;
}
+ ath_dynack_init(ah);
+
return 0;
}
EXPORT_SYMBOL(ath9k_hw_init);
diff --git a/drivers/net/wireless/ath/ath9k/hw.h b/drivers/net/wireless/ath/ath9k/hw.h
index f36d971..b9eef33 100644
--- a/drivers/net/wireless/ath/ath9k/hw.h
+++ b/drivers/net/wireless/ath/ath9k/hw.h
@@ -29,6 +29,7 @@
#include "reg.h"
#include "phy.h"
#include "btcoex.h"
+#include "dynack.h"
#include "../regd.h"
@@ -924,6 +925,8 @@ struct ath_hw {
int (*external_reset)(void);
const struct firmware *eeprom_blob;
+
+ struct ath_dynack dynack;
};
struct ath_bus_ops {
--
1.9.1
^ permalink raw reply related [flat|nested] 28+ messages in thread* [RFCv2 03/10] ath9k: add dynamic ack timeout estimation
@ 2014-07-13 10:18 ` Lorenzo Bianconi
0 siblings, 0 replies; 28+ messages in thread
From: Lorenzo Bianconi @ 2014-07-13 10:18 UTC (permalink / raw)
To: ath9k-devel; +Cc: linux-wireless, Philippe Duchein
Add dynamic ack timeout estimation algorithm based on ack frame RX timestamp,
TX frame timestamp and frame duration.
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com>
Tested-by: Philippe Duchein <wireless-dev@duchein.net>
---
drivers/net/wireless/ath/ath.h | 2 +
drivers/net/wireless/ath/ath9k/ath9k.h | 3 +
drivers/net/wireless/ath/ath9k/dynack.c | 348 ++++++++++++++++++++++++++++++++
drivers/net/wireless/ath/ath9k/dynack.h | 96 +++++++++
drivers/net/wireless/ath/ath9k/hw.c | 2 +
drivers/net/wireless/ath/ath9k/hw.h | 3 +
6 files changed, 454 insertions(+)
create mode 100644 drivers/net/wireless/ath/ath9k/dynack.c
create mode 100644 drivers/net/wireless/ath/ath9k/dynack.h
diff --git a/drivers/net/wireless/ath/ath.h b/drivers/net/wireless/ath/ath.h
index fd9e530..4e51072 100644
--- a/drivers/net/wireless/ath/ath.h
+++ b/drivers/net/wireless/ath/ath.h
@@ -234,6 +234,7 @@ void ath_printk(const char *level, const struct ath_common *common,
* AR9462.
* @ATH_DBG_DFS: radar datection
* @ATH_DBG_WOW: Wake on Wireless
+ * @ATH_DBG_DYNACK: dynack handling
* @ATH_DBG_ANY: enable all debugging
*
* The debug level is used to control the amount and type of debugging output
@@ -261,6 +262,7 @@ enum ATH_DEBUG {
ATH_DBG_MCI = 0x00008000,
ATH_DBG_DFS = 0x00010000,
ATH_DBG_WOW = 0x00020000,
+ ATH_DBG_DYNACK = 0x00040000,
ATH_DBG_ANY = 0xffffffff
};
diff --git a/drivers/net/wireless/ath/ath9k/ath9k.h b/drivers/net/wireless/ath/ath9k/ath9k.h
index 11b5e4d..65a2587 100644
--- a/drivers/net/wireless/ath/ath9k/ath9k.h
+++ b/drivers/net/wireless/ath/ath9k/ath9k.h
@@ -272,6 +272,9 @@ struct ath_node {
struct ath_rx_rate_stats rx_rate_stats;
#endif
u8 key_idx[4];
+
+ u32 ackto;
+ struct list_head list;
};
struct ath_tx_control {
diff --git a/drivers/net/wireless/ath/ath9k/dynack.c b/drivers/net/wireless/ath/ath9k/dynack.c
new file mode 100644
index 0000000..652a4fb
--- /dev/null
+++ b/drivers/net/wireless/ath/ath9k/dynack.c
@@ -0,0 +1,348 @@
+/*
+ * Copyright (c) 2014, Lorenzo Bianconi <lorenzo.bianconi83@gmail.com>
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include "ath9k.h"
+#include "hw.h"
+#include "dynack.h"
+
+#define COMPUTE_TO (5 * HZ)
+#define LATEACK_DELAY (10 * HZ)
+#define LATEACK_TO 256
+#define MAX_DELAY 300
+#define EWMA_LEVEL 96
+#define EWMA_DIV 128
+
+/**
+ * ath_dynack_ewma - EWMA (Exponentially Weighted Moving Average) calculation
+ *
+ */
+static inline u32 ath_dynack_ewma(u32 old, u32 new)
+{
+ return (new * (EWMA_DIV - EWMA_LEVEL) + old * EWMA_LEVEL) / EWMA_DIV;
+}
+
+/**
+ * ath_dynack_get_sifs - get sifs time based on phy used
+ * @ah: ath hw
+ * @phy: phy used
+ *
+ */
+static inline u32 ath_dynack_get_sifs(struct ath_hw *ah, int phy)
+{
+ u32 sifs = CCK_SIFS_TIME;
+
+ if (phy == WLAN_RC_PHY_OFDM) {
+ if (IS_CHAN_QUARTER_RATE(ah->curchan))
+ sifs = OFDM_SIFS_TIME_QUARTER;
+ else if (IS_CHAN_HALF_RATE(ah->curchan))
+ sifs = OFDM_SIFS_TIME_HALF;
+ else
+ sifs = OFDM_SIFS_TIME;
+ }
+ return sifs;
+}
+
+static inline bool ath_dynack_bssidmask(struct ath_hw *ah, const u8 *mac)
+{
+ int i;
+ struct ath_common *common = ath9k_hw_common(ah);
+
+ for (i = 0; i < ETH_ALEN; i++) {
+ if ((common->macaddr[i] & common->bssidmask[i]) !=
+ (mac[i] & common->bssidmask[i]))
+ return false;
+ }
+
+ return true;
+}
+
+/**
+ * ath_dynack_compute_ackto - compute ack timeout based on sta timeout
+ * @ah: ath hw
+ *
+ * should be called while holding qlock
+ */
+static void ath_dynack_compute_ackto(struct ath_hw *ah)
+{
+ struct ath_node *an;
+ u32 to = 0;
+ struct ath_dynack *da = &ah->dynack;
+ struct ath_common *common = ath9k_hw_common(ah);
+
+ list_for_each_entry(an, &da->nodes, list)
+ if (an->ackto > to)
+ to = an->ackto;
+
+ if (to && da->ackto != to) {
+ u32 slottime;
+
+ slottime = (to - 3) / 2;
+ da->ackto = to;
+ ath_dbg(common, DYNACK, "ack timeout %u slottime %u\n",
+ da->ackto, slottime);
+ ath9k_hw_setslottime(ah, slottime);
+ ath9k_hw_set_ack_timeout(ah, da->ackto);
+ ath9k_hw_set_cts_timeout(ah, da->ackto);
+ }
+}
+
+/**
+ * ath_dynack_compute_to - compute ack timeout
+ * @ah: ath hw
+ *
+ * should be called while holding qlock
+ */
+static void ath_dynack_compute_to(struct ath_hw *ah)
+{
+ u32 ackto, ack_ts;
+ u8 *dst, *src;
+ struct ieee80211_sta *sta;
+ struct ath_node *an;
+ struct ts_info *st_ts;
+ struct ath_dynack *da = &ah->dynack;
+
+ rcu_read_lock();
+
+ while (da->st_rbf.h_rb != da->st_rbf.t_rb &&
+ da->ack_rbf.h_rb != da->ack_rbf.t_rb) {
+ ack_ts = da->ack_rbf.tstamp[da->ack_rbf.h_rb];
+ st_ts = &da->st_rbf.ts[da->st_rbf.h_rb];
+ dst = da->st_rbf.addr[da->st_rbf.h_rb].h_dest;
+ src = da->st_rbf.addr[da->st_rbf.h_rb].h_src;
+
+ ath_dbg(ath9k_hw_common(ah), DYNACK,
+ "ack_ts %u st_ts %u st_dur %u [%u-%u]\n",
+ ack_ts, st_ts->tstamp, st_ts->dur,
+ da->ack_rbf.h_rb, da->st_rbf.h_rb);
+
+ if (ack_ts > st_ts->tstamp + st_ts->dur) {
+ ackto = ack_ts - st_ts->tstamp - st_ts->dur;
+
+ if (ackto < MAX_DELAY) {
+ sta = ieee80211_find_sta_by_ifaddr(ah->hw, dst,
+ src);
+ if (sta) {
+ an = (struct ath_node *)sta->drv_priv;
+ an->ackto = ath_dynack_ewma(an->ackto,
+ ackto);
+ ath_dbg(ath9k_hw_common(ah), DYNACK,
+ "%pM to %u\n", dst, an->ackto);
+ if (time_is_before_jiffies(da->lto)) {
+ ath_dynack_compute_ackto(ah);
+ da->lto = jiffies + COMPUTE_TO;
+ }
+ }
+ INCR(da->ack_rbf.h_rb, ATH_DYN_BUF);
+ }
+ INCR(da->st_rbf.h_rb, ATH_DYN_BUF);
+ } else {
+ INCR(da->ack_rbf.h_rb, ATH_DYN_BUF);
+ }
+ }
+
+ rcu_read_unlock();
+}
+
+/**
+ * ath_dynack_sample_tx_ts - status ts sampling method
+ * @ah: ath hw
+ * @skb: socket buffer
+ * @ts: tx status info
+ *
+ */
+void ath_dynack_sample_tx_ts(struct ath_hw *ah, struct sk_buff *skb,
+ struct ath_tx_status *ts)
+{
+ u8 ridx;
+ struct ieee80211_hdr *hdr;
+ struct ath_dynack *da = &ah->dynack;
+ struct ath_common *common = ath9k_hw_common(ah);
+ struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
+
+ if ((info->flags & IEEE80211_TX_CTL_NO_ACK) || !da->enabled)
+ return;
+
+ spin_lock_bh(&da->qlock);
+
+ hdr = (struct ieee80211_hdr *)skb->data;
+
+ /* late ack */
+ if (ts->ts_status & ATH9K_TXERR_XRETRY) {
+ if (ieee80211_is_assoc_req(hdr->frame_control) ||
+ ieee80211_is_assoc_resp(hdr->frame_control)) {
+ ath_dbg(common, DYNACK, "late ack\n");
+ ath9k_hw_setslottime(ah, (LATEACK_TO - 3) / 2);
+ ath9k_hw_set_ack_timeout(ah, LATEACK_TO);
+ ath9k_hw_set_cts_timeout(ah, LATEACK_TO);
+ da->lto = jiffies + LATEACK_DELAY;
+ }
+
+ spin_unlock_bh(&da->qlock);
+ return;
+ }
+
+ ridx = ts->ts_rateindex;
+
+ da->st_rbf.ts[da->st_rbf.t_rb].tstamp = ts->ts_tstamp;
+ da->st_rbf.ts[da->st_rbf.t_rb].dur = ts->duration[ts->ts_rateindex];
+ ether_addr_copy(da->st_rbf.addr[da->st_rbf.t_rb].h_dest, hdr->addr1);
+ ether_addr_copy(da->st_rbf.addr[da->st_rbf.t_rb].h_src, hdr->addr2);
+
+ if (!(info->status.rates[ridx].flags & IEEE80211_TX_RC_MCS)) {
+ u32 phy, sifs;
+ const struct ieee80211_rate *rate;
+ struct ieee80211_tx_rate *rates = info->status.rates;
+
+ rate = &common->sbands[info->band].bitrates[rates[ridx].idx];
+ if (info->band == IEEE80211_BAND_2GHZ &&
+ !(rate->flags & IEEE80211_RATE_ERP_G))
+ phy = WLAN_RC_PHY_CCK;
+ else
+ phy = WLAN_RC_PHY_OFDM;
+
+ sifs = ath_dynack_get_sifs(ah, phy);
+ da->st_rbf.ts[da->st_rbf.t_rb].dur -= sifs;
+ }
+
+ ath_dbg(common, DYNACK, "{%pM} tx sample %u [dur %u][h %u-t %u]\n",
+ hdr->addr1, da->st_rbf.ts[da->st_rbf.t_rb].tstamp,
+ da->st_rbf.ts[da->st_rbf.t_rb].dur, da->st_rbf.h_rb,
+ (da->st_rbf.t_rb + 1) % ATH_DYN_BUF);
+
+ INCR(da->st_rbf.t_rb, ATH_DYN_BUF);
+ if (da->st_rbf.t_rb == da->st_rbf.h_rb)
+ INCR(da->st_rbf.h_rb, ATH_DYN_BUF);
+
+ ath_dynack_compute_to(ah);
+
+ spin_unlock_bh(&da->qlock);
+}
+EXPORT_SYMBOL(ath_dynack_sample_tx_ts);
+
+/**
+ * ath_dynack_sample_ack_ts - ack ts sampling method
+ * @ah: ath hw
+ * @skb: socket buffer
+ * @ts: rx timestamp
+ *
+ */
+void ath_dynack_sample_ack_ts(struct ath_hw *ah, struct sk_buff *skb,
+ u32 ts)
+{
+ struct ath_dynack *da = &ah->dynack;
+ struct ath_common *common = ath9k_hw_common(ah);
+ struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
+
+ if (!ath_dynack_bssidmask(ah, hdr->addr1) || !da->enabled)
+ return;
+
+ spin_lock_bh(&da->qlock);
+ da->ack_rbf.tstamp[da->ack_rbf.t_rb] = ts;
+
+ ath_dbg(common, DYNACK, "rx sample %u [h %u-t %u]\n",
+ da->ack_rbf.tstamp[da->ack_rbf.t_rb],
+ da->ack_rbf.h_rb, (da->ack_rbf.t_rb + 1) % ATH_DYN_BUF);
+
+ INCR(da->ack_rbf.t_rb, ATH_DYN_BUF);
+ if (da->ack_rbf.t_rb == da->ack_rbf.h_rb)
+ INCR(da->ack_rbf.h_rb, ATH_DYN_BUF);
+
+ ath_dynack_compute_to(ah);
+
+ spin_unlock_bh(&da->qlock);
+}
+EXPORT_SYMBOL(ath_dynack_sample_ack_ts);
+
+/**
+ * ath_dynack_node_init - init ath_node related info
+ * @ah: ath hw
+ * @an: ath node
+ *
+ */
+void ath_dynack_node_init(struct ath_hw *ah, struct ath_node *an)
+{
+ /* ackto = slottime + sifs + air delay */
+ u32 ackto = ATH9K_SLOT_TIME_9 + 16 + 64;
+ struct ath_dynack *da = &ah->dynack;
+
+ an->ackto = ackto;
+
+ spin_lock(&da->qlock);
+ list_add_tail(&an->list, &da->nodes);
+ spin_unlock(&da->qlock);
+}
+EXPORT_SYMBOL(ath_dynack_node_init);
+
+/**
+ * ath_dynack_node_deinit - deinit ath_node related info
+ * @ah: ath hw
+ * @an: ath node
+ *
+ */
+void ath_dynack_node_deinit(struct ath_hw *ah, struct ath_node *an)
+{
+ struct ath_dynack *da = &ah->dynack;
+
+ spin_lock(&da->qlock);
+ list_del(&an->list);
+ spin_unlock(&da->qlock);
+}
+EXPORT_SYMBOL(ath_dynack_node_deinit);
+
+/**
+ * ath_dynack_reset - reset dynack processing
+ * @ah: ath hw
+ *
+ */
+void ath_dynack_reset(struct ath_hw *ah)
+{
+ /* ackto = slottime + sifs + air delay */
+ u32 ackto = ATH9K_SLOT_TIME_9 + 16 + 64;
+ struct ath_dynack *da = &ah->dynack;
+
+ da->enabled = true;
+ da->lto = jiffies;
+ da->ackto = ackto;
+
+ da->st_rbf.t_rb = 0;
+ da->st_rbf.h_rb = 0;
+ da->ack_rbf.t_rb = 0;
+ da->ack_rbf.h_rb = 0;
+
+ /* init acktimeout */
+ ath9k_hw_setslottime(ah, (ackto - 3) / 2);
+ ath9k_hw_set_ack_timeout(ah, ackto);
+ ath9k_hw_set_cts_timeout(ah, ackto);
+}
+EXPORT_SYMBOL(ath_dynack_reset);
+
+/**
+ * ath_dynack_init - init dynack data structure
+ * @ah: ath hw
+ *
+ */
+void ath_dynack_init(struct ath_hw *ah)
+{
+ struct ath_dynack *da = &ah->dynack;
+
+ memset(da, 0, sizeof(struct ath_dynack));
+
+ spin_lock_init(&da->qlock);
+ INIT_LIST_HEAD(&da->nodes);
+
+ ath_dynack_reset(ah);
+}
+
diff --git a/drivers/net/wireless/ath/ath9k/dynack.h b/drivers/net/wireless/ath/ath9k/dynack.h
new file mode 100644
index 0000000..b1a03fa
--- /dev/null
+++ b/drivers/net/wireless/ath/ath9k/dynack.h
@@ -0,0 +1,96 @@
+/*
+ * Copyright (c) 2014, Lorenzo Bianconi <lorenzo.bianconi83@gmail.com>
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#ifndef DYNACK_H
+#define DYNACK_H
+
+#define ATH_DYN_BUF 64
+
+struct ath_hw;
+struct ath_node;
+
+/**
+ * ath_dyn_rxbuf - ack frame ring buffer
+ */
+struct ath_dyn_rxbuf {
+ u16 h_rb, t_rb;
+ u32 tstamp[ATH_DYN_BUF];
+};
+
+struct ts_info {
+ u32 tstamp;
+ u32 dur;
+};
+
+struct haddr_pair {
+ u8 h_dest[ETH_ALEN];
+ u8 h_src[ETH_ALEN];
+};
+/**
+ * ath_dyn_txbuf - tx frame ring buffer
+ */
+struct ath_dyn_txbuf {
+ u16 h_rb, t_rb;
+ struct haddr_pair addr[ATH_DYN_BUF];
+ struct ts_info ts[ATH_DYN_BUF];
+};
+
+/**
+ * ath_dynack - dyn ack processing info
+ * @enabled: enable dyn ack processing
+ * @ackto: current ack timeout
+ * @lto: last ack timeout computation
+ * @nodes: ath_node linked list
+ * @qlock: ts queue spinlock
+ * @ack_rbf: ack ts ring buffer
+ * @st_rbf: status ts ring buffer
+ */
+struct ath_dynack {
+ bool enabled;
+ int ackto;
+ unsigned long lto;
+
+ struct list_head nodes;
+
+ /* protect timestamp queue access */
+ spinlock_t qlock;
+ struct ath_dyn_rxbuf ack_rbf;
+ struct ath_dyn_txbuf st_rbf;
+};
+
+#if defined(CONFIG_ATH9K_DYNACK)
+void ath_dynack_reset(struct ath_hw *ah);
+void ath_dynack_node_init(struct ath_hw *ah, struct ath_node *an);
+void ath_dynack_node_deinit(struct ath_hw *ah, struct ath_node *an);
+void ath_dynack_init(struct ath_hw *ah);
+void ath_dynack_sample_ack_ts(struct ath_hw *ah, struct sk_buff *skb, u32 ts);
+void ath_dynack_sample_tx_ts(struct ath_hw *ah, struct sk_buff *skb,
+ struct ath_tx_status *ts);
+#else
+static inline void ath_dynack_init(struct ath_hw *ah) {}
+static inline void ath_dynack_reset(struct ath_hw *ah) {}
+static inline void ath_dynack_node_init(struct ath_hw *ah,
+ struct ath_node *an) {}
+static inline void ath_dynack_node_deinit(struct ath_hw *ah,
+ struct ath_node *an) {}
+static inline void ath_dynack_sample_ack_ts(struct ath_hw *ah,
+ struct sk_buff *skb, u32 ts) {}
+static inline void ath_dynack_sample_tx_ts(struct ath_hw *ah,
+ struct sk_buff *skb,
+ struct ath_tx_status *ts) {}
+#endif
+
+#endif /* DYNACK_H */
diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c
index e88896c..9a6b113 100644
--- a/drivers/net/wireless/ath/ath9k/hw.c
+++ b/drivers/net/wireless/ath/ath9k/hw.c
@@ -647,6 +647,8 @@ int ath9k_hw_init(struct ath_hw *ah)
return ret;
}
+ ath_dynack_init(ah);
+
return 0;
}
EXPORT_SYMBOL(ath9k_hw_init);
diff --git a/drivers/net/wireless/ath/ath9k/hw.h b/drivers/net/wireless/ath/ath9k/hw.h
index f36d971..b9eef33 100644
--- a/drivers/net/wireless/ath/ath9k/hw.h
+++ b/drivers/net/wireless/ath/ath9k/hw.h
@@ -29,6 +29,7 @@
#include "reg.h"
#include "phy.h"
#include "btcoex.h"
+#include "dynack.h"
#include "../regd.h"
@@ -924,6 +925,8 @@ struct ath_hw {
int (*external_reset)(void);
const struct firmware *eeprom_blob;
+
+ struct ath_dynack dynack;
};
struct ath_bus_ops {
--
1.9.1
^ permalink raw reply related [flat|nested] 28+ messages in thread
* [ath9k-devel] [RFCv2 04/10] ath9k: add config for (en|dis)abling ack timeout estimation
2014-07-13 10:18 ` Lorenzo Bianconi
@ 2014-07-13 10:18 ` Lorenzo Bianconi
-1 siblings, 0 replies; 28+ messages in thread
From: Lorenzo Bianconi @ 2014-07-13 10:18 UTC (permalink / raw)
To: ath9k-devel
Add ack timeout estimation to ath9k Makefile
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com>
---
drivers/net/wireless/ath/ath9k/Kconfig | 7 +++++++
drivers/net/wireless/ath/ath9k/Makefile | 3 +++
2 files changed, 10 insertions(+)
diff --git a/drivers/net/wireless/ath/ath9k/Kconfig b/drivers/net/wireless/ath/ath9k/Kconfig
index 8fcc029..ee61a4c 100644
--- a/drivers/net/wireless/ath/ath9k/Kconfig
+++ b/drivers/net/wireless/ath/ath9k/Kconfig
@@ -151,3 +151,10 @@ config ATH9K_HTC_DEBUGFS
depends on ATH9K_HTC && DEBUG_FS
---help---
Say Y, if you need access to ath9k_htc's statistics.
+
+config ATH9K_DYNACK
+ bool "Atheros ath9k ack timeout estimation algorithm (EXPERIMENTAL)"
+ depends on ATH9K
+ default n
+ ---help---
+ This option enables ath9k dynamic ack timeout estimation algorithm
diff --git a/drivers/net/wireless/ath/ath9k/Makefile b/drivers/net/wireless/ath/ath9k/Makefile
index 6b4020a..73704c1 100644
--- a/drivers/net/wireless/ath/ath9k/Makefile
+++ b/drivers/net/wireless/ath/ath9k/Makefile
@@ -49,6 +49,9 @@ ath9k_hw-$(CONFIG_ATH9K_WOW) += ar9003_wow.o
ath9k_hw-$(CONFIG_ATH9K_BTCOEX_SUPPORT) += btcoex.o \
ar9003_mci.o
+
+ath9k_hw-$(CONFIG_ATH9K_DYNACK) += dynack.o
+
obj-$(CONFIG_ATH9K_HW) += ath9k_hw.o
obj-$(CONFIG_ATH9K_COMMON) += ath9k_common.o
--
1.9.1
^ permalink raw reply related [flat|nested] 28+ messages in thread
* [RFCv2 04/10] ath9k: add config for (en|dis)abling ack timeout estimation
@ 2014-07-13 10:18 ` Lorenzo Bianconi
0 siblings, 0 replies; 28+ messages in thread
From: Lorenzo Bianconi @ 2014-07-13 10:18 UTC (permalink / raw)
To: ath9k-devel; +Cc: linux-wireless, Philippe Duchein
Add ack timeout estimation to ath9k Makefile
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com>
---
drivers/net/wireless/ath/ath9k/Kconfig | 7 +++++++
drivers/net/wireless/ath/ath9k/Makefile | 3 +++
2 files changed, 10 insertions(+)
diff --git a/drivers/net/wireless/ath/ath9k/Kconfig b/drivers/net/wireless/ath/ath9k/Kconfig
index 8fcc029..ee61a4c 100644
--- a/drivers/net/wireless/ath/ath9k/Kconfig
+++ b/drivers/net/wireless/ath/ath9k/Kconfig
@@ -151,3 +151,10 @@ config ATH9K_HTC_DEBUGFS
depends on ATH9K_HTC && DEBUG_FS
---help---
Say Y, if you need access to ath9k_htc's statistics.
+
+config ATH9K_DYNACK
+ bool "Atheros ath9k ack timeout estimation algorithm (EXPERIMENTAL)"
+ depends on ATH9K
+ default n
+ ---help---
+ This option enables ath9k dynamic ack timeout estimation algorithm
diff --git a/drivers/net/wireless/ath/ath9k/Makefile b/drivers/net/wireless/ath/ath9k/Makefile
index 6b4020a..73704c1 100644
--- a/drivers/net/wireless/ath/ath9k/Makefile
+++ b/drivers/net/wireless/ath/ath9k/Makefile
@@ -49,6 +49,9 @@ ath9k_hw-$(CONFIG_ATH9K_WOW) += ar9003_wow.o
ath9k_hw-$(CONFIG_ATH9K_BTCOEX_SUPPORT) += btcoex.o \
ar9003_mci.o
+
+ath9k_hw-$(CONFIG_ATH9K_DYNACK) += dynack.o
+
obj-$(CONFIG_ATH9K_HW) += ath9k_hw.o
obj-$(CONFIG_ATH9K_COMMON) += ath9k_common.o
--
1.9.1
^ permalink raw reply related [flat|nested] 28+ messages in thread
* [ath9k-devel] [RFCv2 05/10] ath9k: do not overwrite ack timeout estimation
2014-07-13 10:18 ` Lorenzo Bianconi
@ 2014-07-13 10:18 ` Lorenzo Bianconi
-1 siblings, 0 replies; 28+ messages in thread
From: Lorenzo Bianconi @ 2014-07-13 10:18 UTC (permalink / raw)
To: ath9k-devel
Do not overwrite ack timeout estimation in ath9k_hw_init_global_settings() if
dynack processing is enabled
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com>
---
drivers/net/wireless/ath/ath9k/hw.c | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c
index 9a6b113..b2ca47a 100644
--- a/drivers/net/wireless/ath/ath9k/hw.c
+++ b/drivers/net/wireless/ath/ath9k/hw.c
@@ -1055,6 +1055,14 @@ void ath9k_hw_init_global_settings(struct ath_hw *ah)
ctstimeout += 48 - sifstime - ah->slottime;
}
+ if (ah->dynack.enabled) {
+ acktimeout = ah->dynack.ackto;
+ ctstimeout = acktimeout;
+ slottime = (acktimeout - 3) / 2;
+ } else {
+ ah->dynack.ackto = acktimeout;
+ }
+
ath9k_hw_set_sifs_time(ah, sifstime);
ath9k_hw_setslottime(ah, slottime);
ath9k_hw_set_ack_timeout(ah, acktimeout);
--
1.9.1
^ permalink raw reply related [flat|nested] 28+ messages in thread* [RFCv2 05/10] ath9k: do not overwrite ack timeout estimation
@ 2014-07-13 10:18 ` Lorenzo Bianconi
0 siblings, 0 replies; 28+ messages in thread
From: Lorenzo Bianconi @ 2014-07-13 10:18 UTC (permalink / raw)
To: ath9k-devel; +Cc: linux-wireless, Philippe Duchein
Do not overwrite ack timeout estimation in ath9k_hw_init_global_settings() if
dynack processing is enabled
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com>
---
drivers/net/wireless/ath/ath9k/hw.c | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c
index 9a6b113..b2ca47a 100644
--- a/drivers/net/wireless/ath/ath9k/hw.c
+++ b/drivers/net/wireless/ath/ath9k/hw.c
@@ -1055,6 +1055,14 @@ void ath9k_hw_init_global_settings(struct ath_hw *ah)
ctstimeout += 48 - sifstime - ah->slottime;
}
+ if (ah->dynack.enabled) {
+ acktimeout = ah->dynack.ackto;
+ ctstimeout = acktimeout;
+ slottime = (acktimeout - 3) / 2;
+ } else {
+ ah->dynack.ackto = acktimeout;
+ }
+
ath9k_hw_set_sifs_time(ah, sifstime);
ath9k_hw_setslottime(ah, slottime);
ath9k_hw_set_ack_timeout(ah, acktimeout);
--
1.9.1
^ permalink raw reply related [flat|nested] 28+ messages in thread
* [ath9k-devel] [RFCv2 06/10] ath9k: add sampling methods for (tx|rx) timestamp
2014-07-13 10:18 ` Lorenzo Bianconi
@ 2014-07-13 10:18 ` Lorenzo Bianconi
-1 siblings, 0 replies; 28+ messages in thread
From: Lorenzo Bianconi @ 2014-07-13 10:18 UTC (permalink / raw)
To: ath9k-devel
Add sampling methods for ack RX timestamp in ath_rx_tasklet() and for TX frame
timestamp in ath_tx_complete_aggr() and in ath_tx_process_buffer()
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com>
---
drivers/net/wireless/ath/ath9k/recv.c | 5 +++++
drivers/net/wireless/ath/ath9k/xmit.c | 5 +++++
2 files changed, 10 insertions(+)
diff --git a/drivers/net/wireless/ath/ath9k/recv.c b/drivers/net/wireless/ath/ath9k/recv.c
index 74ab1d0..ad317a4 100644
--- a/drivers/net/wireless/ath/ath9k/recv.c
+++ b/drivers/net/wireless/ath/ath9k/recv.c
@@ -991,6 +991,7 @@ int ath_rx_tasklet(struct ath_softc *sc, int flush, bool hp)
unsigned long flags;
dma_addr_t new_buf_addr;
unsigned int budget = 512;
+ struct ieee80211_hdr *hdr;
if (edma)
dma_type = DMA_BIDIRECTIONAL;
@@ -1120,6 +1121,10 @@ int ath_rx_tasklet(struct ath_softc *sc, int flush, bool hp)
ath9k_apply_ampdu_details(sc, &rs, rxs);
ath_debug_rate_stats(sc, &rs, skb);
+ hdr = (struct ieee80211_hdr *)skb->data;
+ if (ieee80211_is_ack(hdr->frame_control))
+ ath_dynack_sample_ack_ts(sc->sc_ah, skb, rs.rs_tstamp);
+
ieee80211_rx(hw, skb);
requeue_drop_frag:
diff --git a/drivers/net/wireless/ath/ath9k/xmit.c b/drivers/net/wireless/ath/ath9k/xmit.c
index d4927c9..9497ed7 100644
--- a/drivers/net/wireless/ath/ath9k/xmit.c
+++ b/drivers/net/wireless/ath/ath9k/xmit.c
@@ -588,6 +588,10 @@ static void ath_tx_complete_aggr(struct ath_softc *sc, struct ath_txq *txq,
memcpy(tx_info->control.rates, rates, sizeof(rates));
ath_tx_rc_status(sc, bf, ts, nframes, nbad, txok);
rc_update = false;
+ if (bf == bf->bf_lastbf)
+ ath_dynack_sample_tx_ts(sc->sc_ah,
+ bf->bf_mpdu,
+ ts);
}
ath_tx_complete_buf(sc, bf, txq, &bf_head, ts,
@@ -688,6 +692,7 @@ static void ath_tx_process_buffer(struct ath_softc *sc, struct ath_txq *txq,
memcpy(info->control.rates, bf->rates,
sizeof(info->control.rates));
ath_tx_rc_status(sc, bf, ts, 1, txok ? 0 : 1, txok);
+ ath_dynack_sample_tx_ts(sc->sc_ah, bf->bf_mpdu, ts);
}
ath_tx_complete_buf(sc, bf, txq, bf_head, ts, txok);
} else
--
1.9.1
^ permalink raw reply related [flat|nested] 28+ messages in thread
* [RFCv2 06/10] ath9k: add sampling methods for (tx|rx) timestamp
@ 2014-07-13 10:18 ` Lorenzo Bianconi
0 siblings, 0 replies; 28+ messages in thread
From: Lorenzo Bianconi @ 2014-07-13 10:18 UTC (permalink / raw)
To: ath9k-devel; +Cc: linux-wireless, Philippe Duchein
Add sampling methods for ack RX timestamp in ath_rx_tasklet() and for TX frame
timestamp in ath_tx_complete_aggr() and in ath_tx_process_buffer()
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com>
---
drivers/net/wireless/ath/ath9k/recv.c | 5 +++++
drivers/net/wireless/ath/ath9k/xmit.c | 5 +++++
2 files changed, 10 insertions(+)
diff --git a/drivers/net/wireless/ath/ath9k/recv.c b/drivers/net/wireless/ath/ath9k/recv.c
index 74ab1d0..ad317a4 100644
--- a/drivers/net/wireless/ath/ath9k/recv.c
+++ b/drivers/net/wireless/ath/ath9k/recv.c
@@ -991,6 +991,7 @@ int ath_rx_tasklet(struct ath_softc *sc, int flush, bool hp)
unsigned long flags;
dma_addr_t new_buf_addr;
unsigned int budget = 512;
+ struct ieee80211_hdr *hdr;
if (edma)
dma_type = DMA_BIDIRECTIONAL;
@@ -1120,6 +1121,10 @@ int ath_rx_tasklet(struct ath_softc *sc, int flush, bool hp)
ath9k_apply_ampdu_details(sc, &rs, rxs);
ath_debug_rate_stats(sc, &rs, skb);
+ hdr = (struct ieee80211_hdr *)skb->data;
+ if (ieee80211_is_ack(hdr->frame_control))
+ ath_dynack_sample_ack_ts(sc->sc_ah, skb, rs.rs_tstamp);
+
ieee80211_rx(hw, skb);
requeue_drop_frag:
diff --git a/drivers/net/wireless/ath/ath9k/xmit.c b/drivers/net/wireless/ath/ath9k/xmit.c
index d4927c9..9497ed7 100644
--- a/drivers/net/wireless/ath/ath9k/xmit.c
+++ b/drivers/net/wireless/ath/ath9k/xmit.c
@@ -588,6 +588,10 @@ static void ath_tx_complete_aggr(struct ath_softc *sc, struct ath_txq *txq,
memcpy(tx_info->control.rates, rates, sizeof(rates));
ath_tx_rc_status(sc, bf, ts, nframes, nbad, txok);
rc_update = false;
+ if (bf == bf->bf_lastbf)
+ ath_dynack_sample_tx_ts(sc->sc_ah,
+ bf->bf_mpdu,
+ ts);
}
ath_tx_complete_buf(sc, bf, txq, &bf_head, ts,
@@ -688,6 +692,7 @@ static void ath_tx_process_buffer(struct ath_softc *sc, struct ath_txq *txq,
memcpy(info->control.rates, bf->rates,
sizeof(info->control.rates));
ath_tx_rc_status(sc, bf, ts, 1, txok ? 0 : 1, txok);
+ ath_dynack_sample_tx_ts(sc->sc_ah, bf->bf_mpdu, ts);
}
ath_tx_complete_buf(sc, bf, txq, bf_head, ts, txok);
} else
--
1.9.1
^ permalink raw reply related [flat|nested] 28+ messages in thread
* [ath9k-devel] [RFCv2 07/10] ath9k: enable control frame reception
2014-07-13 10:18 ` Lorenzo Bianconi
@ 2014-07-13 10:18 ` Lorenzo Bianconi
-1 siblings, 0 replies; 28+ messages in thread
From: Lorenzo Bianconi @ 2014-07-13 10:18 UTC (permalink / raw)
To: ath9k-devel
Enable control frame reception if dynamic ack processing is enabled
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com>
---
drivers/net/wireless/ath/ath9k/recv.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/wireless/ath/ath9k/recv.c b/drivers/net/wireless/ath/ath9k/recv.c
index ad317a4..cc5ba4a 100644
--- a/drivers/net/wireless/ath/ath9k/recv.c
+++ b/drivers/net/wireless/ath/ath9k/recv.c
@@ -398,7 +398,7 @@ u32 ath_calcrxfilter(struct ath_softc *sc)
if (sc->sc_ah->is_monitoring)
rfilt |= ATH9K_RX_FILTER_PROM;
- if (sc->rx.rxfilter & FIF_CONTROL)
+ if ((sc->rx.rxfilter & FIF_CONTROL) || sc->sc_ah->dynack.enabled)
rfilt |= ATH9K_RX_FILTER_CONTROL;
if ((sc->sc_ah->opmode == NL80211_IFTYPE_STATION) &&
--
1.9.1
^ permalink raw reply related [flat|nested] 28+ messages in thread
* [RFCv2 07/10] ath9k: enable control frame reception
@ 2014-07-13 10:18 ` Lorenzo Bianconi
0 siblings, 0 replies; 28+ messages in thread
From: Lorenzo Bianconi @ 2014-07-13 10:18 UTC (permalink / raw)
To: ath9k-devel; +Cc: linux-wireless, Philippe Duchein
Enable control frame reception if dynamic ack processing is enabled
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com>
---
drivers/net/wireless/ath/ath9k/recv.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/wireless/ath/ath9k/recv.c b/drivers/net/wireless/ath/ath9k/recv.c
index ad317a4..cc5ba4a 100644
--- a/drivers/net/wireless/ath/ath9k/recv.c
+++ b/drivers/net/wireless/ath/ath9k/recv.c
@@ -398,7 +398,7 @@ u32 ath_calcrxfilter(struct ath_softc *sc)
if (sc->sc_ah->is_monitoring)
rfilt |= ATH9K_RX_FILTER_PROM;
- if (sc->rx.rxfilter & FIF_CONTROL)
+ if ((sc->rx.rxfilter & FIF_CONTROL) || sc->sc_ah->dynack.enabled)
rfilt |= ATH9K_RX_FILTER_CONTROL;
if ((sc->sc_ah->opmode == NL80211_IFTYPE_STATION) &&
--
1.9.1
^ permalink raw reply related [flat|nested] 28+ messages in thread
* Re: [RFCv2 07/10] ath9k: enable control frame reception
2014-07-13 10:18 ` Lorenzo Bianconi
(?)
@ 2014-10-24 2:00 ` Tsaixiong
-1 siblings, 0 replies; 28+ messages in thread
From: Tsaixiong @ 2014-10-24 2:00 UTC (permalink / raw)
To: linux-wireless
Lorenzo Bianconi <lorenzo.bianconi83@...> writes:
>
> Enable control frame reception if dynamic ack processing is enabled
>
> Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi83@...>
> ---
> drivers/net/wireless/ath/ath9k/recv.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/net/wireless/ath/ath9k/recv.c
b/drivers/net/wireless/ath/ath9k/recv.c
> index ad317a4..cc5ba4a 100644
> --- a/drivers/net/wireless/ath/ath9k/recv.c
> +++ b/drivers/net/wireless/ath/ath9k/recv.c
> <at> <at> -398,7 +398,7 <at> <at> u32 ath_calcrxfilter(struct ath_softc
*sc)
> if (sc->sc_ah->is_monitoring)
> rfilt |= ATH9K_RX_FILTER_PROM;
>
> - if (sc->rx.rxfilter & FIF_CONTROL)
> + if ((sc->rx.rxfilter & FIF_CONTROL) || sc->sc_ah->dynack.enabled)
> rfilt |= ATH9K_RX_FILTER_CONTROL;
>
> if ((sc->sc_ah->opmode == NL80211_IFTYPE_STATION) &&
Dear Lorenzo:
Thank you your patch!But I want to know where can I get the RTS/CTS and ACK in
MAC80211 or ATH9K after adopting this change,using the function
ieee80211_rx_h_ctrl(/net/mac80211/rx.c)?
Any reply will be much appreciated!!
^ permalink raw reply [flat|nested] 28+ messages in thread
* [ath9k-devel] [RFCv2 08/10] ath9k: add debugfs support for dynack
2014-07-13 10:18 ` Lorenzo Bianconi
@ 2014-07-13 10:18 ` Lorenzo Bianconi
-1 siblings, 0 replies; 28+ messages in thread
From: Lorenzo Bianconi @ 2014-07-13 10:18 UTC (permalink / raw)
To: ath9k-devel
Add ack_to entry to debugfs in order to dump current ack timeout value.
Add dynack entry to enable/disable ack timeout estimation algorithm:
echo (1|0) > /sys/kernel/debug/ieee80211/phy0/ath9k/dynack
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com>
---
drivers/net/wireless/ath/ath9k/debug.c | 82 ++++++++++++++++++++++++++++++++++
1 file changed, 82 insertions(+)
diff --git a/drivers/net/wireless/ath/ath9k/debug.c b/drivers/net/wireless/ath/ath9k/debug.c
index ce073e9..de6ea5a 100644
--- a/drivers/net/wireless/ath/ath9k/debug.c
+++ b/drivers/net/wireless/ath/ath9k/debug.c
@@ -1169,6 +1169,81 @@ static const struct file_operations fops_btcoex = {
};
#endif
+#ifdef CONFIG_ATH9K_DYNACK
+/* enable/disable dynack processing */
+static ssize_t read_file_dynack(struct file *file, char __user *user_buf,
+ size_t count, loff_t *ppos)
+{
+ struct ath_softc *sc = file->private_data;
+ struct ath_hw *ah = sc->sc_ah;
+ char buf[32];
+ unsigned int len;
+
+ len = sprintf(buf, "%u\n", ah->dynack.enabled);
+ return simple_read_from_buffer(user_buf, count, ppos, buf, len);
+}
+
+static ssize_t write_file_dynack(struct file *file, const char __user *user_buf,
+ size_t count, loff_t *ppos)
+{
+ struct ath_softc *sc = file->private_data;
+ struct ath_hw *ah = sc->sc_ah;
+ char buf[32];
+ unsigned long dynack;
+ ssize_t len;
+ u32 rfilt;
+
+ len = min(count, sizeof(buf) - 1);
+ if (copy_from_user(buf, user_buf, len))
+ return -EFAULT;
+
+ buf[len] = '\0';
+ if (kstrtoul(buf, 0, &dynack))
+ return -EINVAL;
+
+ ah->dynack.enabled = dynack;
+
+ rfilt = ath_calcrxfilter(sc);
+ ath9k_hw_setrxfilter(ah, rfilt);
+
+ if (ah->dynack.enabled)
+ ath_dynack_reset(ah);
+ else
+ ath9k_hw_init_global_settings(ah);
+
+ return count;
+}
+
+static const struct file_operations fops_dynack = {
+ .read = read_file_dynack,
+ .write = write_file_dynack,
+ .open = simple_open,
+ .owner = THIS_MODULE,
+ .llseek = default_llseek,
+};
+
+static ssize_t read_file_ackto(struct file *file, char __user *user_buf,
+ size_t count, loff_t *ppos)
+{
+ struct ath_softc *sc = file->private_data;
+ struct ath_hw *ah = sc->sc_ah;
+ char buf[32];
+ unsigned int len;
+
+ len = sprintf(buf, "%u %c\n", ah->dynack.ackto,
+ (ah->dynack.enabled) ? 'A' : 'S');
+
+ return simple_read_from_buffer(user_buf, count, ppos, buf, len);
+}
+
+static const struct file_operations fops_ackto = {
+ .read = read_file_ackto,
+ .open = simple_open,
+ .owner = THIS_MODULE,
+ .llseek = default_llseek,
+};
+#endif
+
/* Ethtool support for get-stats */
#define AMKSTR(nm) #nm "_BE", #nm "_BK", #nm "_VI", #nm "_VO"
@@ -1374,5 +1449,12 @@ int ath9k_init_debug(struct ath_hw *ah)
&fops_btcoex);
#endif
+#ifdef CONFIG_ATH9K_DYNACK
+ debugfs_create_file("dynack", S_IRUSR | S_IWUSR,
+ sc->debug.debugfs_phy, sc, &fops_dynack);
+ debugfs_create_file("ack_to", S_IRUSR | S_IWUSR, sc->debug.debugfs_phy,
+ sc, &fops_ackto);
+#endif
+
return 0;
}
--
1.9.1
^ permalink raw reply related [flat|nested] 28+ messages in thread* [RFCv2 08/10] ath9k: add debugfs support for dynack
@ 2014-07-13 10:18 ` Lorenzo Bianconi
0 siblings, 0 replies; 28+ messages in thread
From: Lorenzo Bianconi @ 2014-07-13 10:18 UTC (permalink / raw)
To: ath9k-devel; +Cc: linux-wireless, Philippe Duchein
Add ack_to entry to debugfs in order to dump current ack timeout value.
Add dynack entry to enable/disable ack timeout estimation algorithm:
echo (1|0) > /sys/kernel/debug/ieee80211/phy0/ath9k/dynack
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com>
---
drivers/net/wireless/ath/ath9k/debug.c | 82 ++++++++++++++++++++++++++++++++++
1 file changed, 82 insertions(+)
diff --git a/drivers/net/wireless/ath/ath9k/debug.c b/drivers/net/wireless/ath/ath9k/debug.c
index ce073e9..de6ea5a 100644
--- a/drivers/net/wireless/ath/ath9k/debug.c
+++ b/drivers/net/wireless/ath/ath9k/debug.c
@@ -1169,6 +1169,81 @@ static const struct file_operations fops_btcoex = {
};
#endif
+#ifdef CONFIG_ATH9K_DYNACK
+/* enable/disable dynack processing */
+static ssize_t read_file_dynack(struct file *file, char __user *user_buf,
+ size_t count, loff_t *ppos)
+{
+ struct ath_softc *sc = file->private_data;
+ struct ath_hw *ah = sc->sc_ah;
+ char buf[32];
+ unsigned int len;
+
+ len = sprintf(buf, "%u\n", ah->dynack.enabled);
+ return simple_read_from_buffer(user_buf, count, ppos, buf, len);
+}
+
+static ssize_t write_file_dynack(struct file *file, const char __user *user_buf,
+ size_t count, loff_t *ppos)
+{
+ struct ath_softc *sc = file->private_data;
+ struct ath_hw *ah = sc->sc_ah;
+ char buf[32];
+ unsigned long dynack;
+ ssize_t len;
+ u32 rfilt;
+
+ len = min(count, sizeof(buf) - 1);
+ if (copy_from_user(buf, user_buf, len))
+ return -EFAULT;
+
+ buf[len] = '\0';
+ if (kstrtoul(buf, 0, &dynack))
+ return -EINVAL;
+
+ ah->dynack.enabled = dynack;
+
+ rfilt = ath_calcrxfilter(sc);
+ ath9k_hw_setrxfilter(ah, rfilt);
+
+ if (ah->dynack.enabled)
+ ath_dynack_reset(ah);
+ else
+ ath9k_hw_init_global_settings(ah);
+
+ return count;
+}
+
+static const struct file_operations fops_dynack = {
+ .read = read_file_dynack,
+ .write = write_file_dynack,
+ .open = simple_open,
+ .owner = THIS_MODULE,
+ .llseek = default_llseek,
+};
+
+static ssize_t read_file_ackto(struct file *file, char __user *user_buf,
+ size_t count, loff_t *ppos)
+{
+ struct ath_softc *sc = file->private_data;
+ struct ath_hw *ah = sc->sc_ah;
+ char buf[32];
+ unsigned int len;
+
+ len = sprintf(buf, "%u %c\n", ah->dynack.ackto,
+ (ah->dynack.enabled) ? 'A' : 'S');
+
+ return simple_read_from_buffer(user_buf, count, ppos, buf, len);
+}
+
+static const struct file_operations fops_ackto = {
+ .read = read_file_ackto,
+ .open = simple_open,
+ .owner = THIS_MODULE,
+ .llseek = default_llseek,
+};
+#endif
+
/* Ethtool support for get-stats */
#define AMKSTR(nm) #nm "_BE", #nm "_BK", #nm "_VI", #nm "_VO"
@@ -1374,5 +1449,12 @@ int ath9k_init_debug(struct ath_hw *ah)
&fops_btcoex);
#endif
+#ifdef CONFIG_ATH9K_DYNACK
+ debugfs_create_file("dynack", S_IRUSR | S_IWUSR,
+ sc->debug.debugfs_phy, sc, &fops_dynack);
+ debugfs_create_file("ack_to", S_IRUSR | S_IWUSR, sc->debug.debugfs_phy,
+ sc, &fops_ackto);
+#endif
+
return 0;
}
--
1.9.1
^ permalink raw reply related [flat|nested] 28+ messages in thread
* [ath9k-devel] [RFCv2 09/10] ath9k: disable dynack algorithm when coverage class is set
2014-07-13 10:18 ` Lorenzo Bianconi
@ 2014-07-13 10:18 ` Lorenzo Bianconi
-1 siblings, 0 replies; 28+ messages in thread
From: Lorenzo Bianconi @ 2014-07-13 10:18 UTC (permalink / raw)
To: ath9k-devel
Disable ack timeout estimation algorithm if the coverage class has been
configured
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com>
---
drivers/net/wireless/ath/ath9k/main.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c
index e6ac8d2..689db57 100644
--- a/drivers/net/wireless/ath/ath9k/main.c
+++ b/drivers/net/wireless/ath/ath9k/main.c
@@ -1969,6 +1969,7 @@ static void ath9k_set_coverage_class(struct ieee80211_hw *hw, u8 coverage_class)
mutex_lock(&sc->mutex);
ah->coverage_class = coverage_class;
+ ah->dynack.enabled = false;
ath9k_ps_wakeup(sc);
ath9k_hw_init_global_settings(ah);
--
1.9.1
^ permalink raw reply related [flat|nested] 28+ messages in thread
* [RFCv2 09/10] ath9k: disable dynack algorithm when coverage class is set
@ 2014-07-13 10:18 ` Lorenzo Bianconi
0 siblings, 0 replies; 28+ messages in thread
From: Lorenzo Bianconi @ 2014-07-13 10:18 UTC (permalink / raw)
To: ath9k-devel; +Cc: linux-wireless, Philippe Duchein
Disable ack timeout estimation algorithm if the coverage class has been
configured
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com>
---
drivers/net/wireless/ath/ath9k/main.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c
index e6ac8d2..689db57 100644
--- a/drivers/net/wireless/ath/ath9k/main.c
+++ b/drivers/net/wireless/ath/ath9k/main.c
@@ -1969,6 +1969,7 @@ static void ath9k_set_coverage_class(struct ieee80211_hw *hw, u8 coverage_class)
mutex_lock(&sc->mutex);
ah->coverage_class = coverage_class;
+ ah->dynack.enabled = false;
ath9k_ps_wakeup(sc);
ath9k_hw_init_global_settings(ah);
--
1.9.1
^ permalink raw reply related [flat|nested] 28+ messages in thread
* [ath9k-devel] [RFCv2 09/10] ath9k: disable dynack algorithm when coverage class is set
2014-07-13 10:18 ` Lorenzo Bianconi
@ 2014-07-13 10:30 ` Felix Fietkau
-1 siblings, 0 replies; 28+ messages in thread
From: Felix Fietkau @ 2014-07-13 10:30 UTC (permalink / raw)
To: ath9k-devel
On 2014-07-13 12:18, Lorenzo Bianconi wrote:
> Disable ack timeout estimation algorithm if the coverage class has been
> configured
>
> Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com>
I think this is broken, since it doesn't allow you to re-enable dynack
through the same way as it was disabled.
I would recommend adding an 'auto' value for coverage class.
- Felix
^ permalink raw reply [flat|nested] 28+ messages in thread
* Re: [ath9k-devel] [RFCv2 09/10] ath9k: disable dynack algorithm when coverage class is set
@ 2014-07-13 10:30 ` Felix Fietkau
0 siblings, 0 replies; 28+ messages in thread
From: Felix Fietkau @ 2014-07-13 10:30 UTC (permalink / raw)
To: Lorenzo Bianconi, ath9k-devel; +Cc: linux-wireless
On 2014-07-13 12:18, Lorenzo Bianconi wrote:
> Disable ack timeout estimation algorithm if the coverage class has been
> configured
>
> Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com>
I think this is broken, since it doesn't allow you to re-enable dynack
through the same way as it was disabled.
I would recommend adding an 'auto' value for coverage class.
- Felix
^ permalink raw reply [flat|nested] 28+ messages in thread
* [ath9k-devel] [RFCv2 09/10] ath9k: disable dynack algorithm when coverage class is set
2014-07-13 10:30 ` Felix Fietkau
(?)
@ 2014-07-13 10:31 ` Hosam Hittini
-1 siblings, 0 replies; 28+ messages in thread
From: Hosam Hittini @ 2014-07-13 10:31 UTC (permalink / raw)
To: ath9k-devel
I don?t know why I?m a part of this
Getting so many emails!
Regards,
Eng. Hosam Hittini
On Jul 13, 2014, at 2:30 PM, Felix Fietkau <nbd@openwrt.org> wrote:
> On 2014-07-13 12:18, Lorenzo Bianconi wrote:
>> Disable ack timeout estimation algorithm if the coverage class has been
>> configured
>>
>> Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com>
> I think this is broken, since it doesn't allow you to re-enable dynack
> through the same way as it was disabled.
> I would recommend adding an 'auto' value for coverage class.
>
> - Felix
> _______________________________________________
> ath9k-devel mailing list
> ath9k-devel at lists.ath9k.org
> https://lists.ath9k.org/mailman/listinfo/ath9k-devel
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.ath9k.org/pipermail/ath9k-devel/attachments/20140713/2f8a8ee3/attachment-0001.htm
^ permalink raw reply [flat|nested] 28+ messages in thread
* [ath9k-devel] [RFCv2 09/10] ath9k: disable dynack algorithm when coverage class is set
2014-07-13 10:30 ` Felix Fietkau
@ 2014-07-13 16:47 ` Lorenzo Bianconi
-1 siblings, 0 replies; 28+ messages in thread
From: Lorenzo Bianconi @ 2014-07-13 16:47 UTC (permalink / raw)
To: ath9k-devel
> On 2014-07-13 12:18, Lorenzo Bianconi wrote:
>> Disable ack timeout estimation algorithm if the coverage class has been
>> configured
>>
>> Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com>
> I think this is broken, since it doesn't allow you to re-enable dynack
> through the same way as it was disabled.
> I would recommend adding an 'auto' value for coverage class.
Ok. Could we use 255 as 'auto' value? Did you mean something else?
According to the standard maximum value for coverage class is 31, isn't it?
>
> - Felix
Best regards,
Lorenzo
--
UNIX is Sexy: who | grep -i blonde | talk; cd ~; wine; talk; touch;
unzip; touch; strip; gasp; finger; gasp; mount; fsck; more; yes; gasp;
umount; make clean; sleep
^ permalink raw reply [flat|nested] 28+ messages in thread
* Re: [ath9k-devel] [RFCv2 09/10] ath9k: disable dynack algorithm when coverage class is set
@ 2014-07-13 16:47 ` Lorenzo Bianconi
0 siblings, 0 replies; 28+ messages in thread
From: Lorenzo Bianconi @ 2014-07-13 16:47 UTC (permalink / raw)
To: Felix Fietkau; +Cc: ath9k-devel, linux-wireless
> On 2014-07-13 12:18, Lorenzo Bianconi wrote:
>> Disable ack timeout estimation algorithm if the coverage class has been
>> configured
>>
>> Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com>
> I think this is broken, since it doesn't allow you to re-enable dynack
> through the same way as it was disabled.
> I would recommend adding an 'auto' value for coverage class.
Ok. Could we use 255 as 'auto' value? Did you mean something else?
According to the standard maximum value for coverage class is 31, isn't it?
>
> - Felix
Best regards,
Lorenzo
--
UNIX is Sexy: who | grep -i blonde | talk; cd ~; wine; talk; touch;
unzip; touch; strip; gasp; finger; gasp; mount; fsck; more; yes; gasp;
umount; make clean; sleep
^ permalink raw reply [flat|nested] 28+ messages in thread
* [ath9k-devel] [RFCv2 10/10] ath9k: initialize ath_node linked list
2014-07-13 10:18 ` Lorenzo Bianconi
@ 2014-07-13 10:18 ` Lorenzo Bianconi
-1 siblings, 0 replies; 28+ messages in thread
From: Lorenzo Bianconi @ 2014-07-13 10:18 UTC (permalink / raw)
To: ath9k-devel
Initialize neighbor linked list used by estimation algorithm to compute maximum
sta ack timeout
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com>
---
drivers/net/wireless/ath/ath9k/main.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c
index 689db57..93ad6c1 100644
--- a/drivers/net/wireless/ath/ath9k/main.c
+++ b/drivers/net/wireless/ath/ath9k/main.c
@@ -358,12 +358,16 @@ static void ath_node_attach(struct ath_softc *sc, struct ieee80211_sta *sta,
memset(&an->key_idx, 0, sizeof(an->key_idx));
ath_tx_node_init(sc, an);
+
+ ath_dynack_node_init(sc->sc_ah, an);
}
static void ath_node_detach(struct ath_softc *sc, struct ieee80211_sta *sta)
{
struct ath_node *an = (struct ath_node *)sta->drv_priv;
ath_tx_node_cleanup(sc, an);
+
+ ath_dynack_node_deinit(sc->sc_ah, an);
}
void ath9k_tasklet(unsigned long data)
--
1.9.1
^ permalink raw reply related [flat|nested] 28+ messages in thread* [RFCv2 10/10] ath9k: initialize ath_node linked list
@ 2014-07-13 10:18 ` Lorenzo Bianconi
0 siblings, 0 replies; 28+ messages in thread
From: Lorenzo Bianconi @ 2014-07-13 10:18 UTC (permalink / raw)
To: ath9k-devel; +Cc: linux-wireless, Philippe Duchein
Initialize neighbor linked list used by estimation algorithm to compute maximum
sta ack timeout
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com>
---
drivers/net/wireless/ath/ath9k/main.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c
index 689db57..93ad6c1 100644
--- a/drivers/net/wireless/ath/ath9k/main.c
+++ b/drivers/net/wireless/ath/ath9k/main.c
@@ -358,12 +358,16 @@ static void ath_node_attach(struct ath_softc *sc, struct ieee80211_sta *sta,
memset(&an->key_idx, 0, sizeof(an->key_idx));
ath_tx_node_init(sc, an);
+
+ ath_dynack_node_init(sc->sc_ah, an);
}
static void ath_node_detach(struct ath_softc *sc, struct ieee80211_sta *sta)
{
struct ath_node *an = (struct ath_node *)sta->drv_priv;
ath_tx_node_cleanup(sc, an);
+
+ ath_dynack_node_deinit(sc->sc_ah, an);
}
void ath9k_tasklet(unsigned long data)
--
1.9.1
^ permalink raw reply related [flat|nested] 28+ messages in thread