From: Marc Kleine-Budde <mkl@pengutronix.de>
To: Varka Bhadram <varkabhadram@gmail.com>,
Dong Aisheng <b29396@freescale.com>
Cc: linux-can@vger.kernel.org, wg@grandegger.com,
socketcan@hartkopp.net, linux-arm-kernel@lists.infradead.org,
devicetree@vger.kernel.org, mark.rutland@arm.com
Subject: Re: [PATCH v4 2/2] can: m_can: add Bosch M_CAN controller support
Date: Tue, 15 Jul 2014 09:10:52 +0200 [thread overview]
Message-ID: <53C4D3FC.1030401@pengutronix.de> (raw)
In-Reply-To: <53C4D0B6.4010302@gmail.com>
[-- Attachment #1: Type: text/plain, Size: 5226 bytes --]
On 07/15/2014 08:56 AM, Varka Bhadram wrote:
> On 07/15/2014 11:57 AM, Dong Aisheng wrote:
>> On Mon, Jul 14, 2014 at 06:17:17PM +0530, Varka Bhadram wrote:
>>>
>>> +/* Test Register (TEST) */
>>> +#define TEST_LBCK BIT(4)
>>> +
>>> +/* CC Control Register(CCCR) */
>>> +#define CCCR_TEST BIT(7)
>>> +#define CCCR_MON BIT(5)
>>> +#define CCCR_CCE BIT(1)
>>> +#define CCCR_INIT BIT(0)
>>> +
>>> +/* Bit Timing & Prescaler Register (BTP) */
>>> +#define BTR_BRP_MASK 0x3ff
>>> +#define BTR_BRP_SHIFT 16
>>> +#define BTR_TSEG1_SHIFT 8
>>> +#define BTR_TSEG1_MASK (0x3f << BTR_TSEG1_SHIFT)
>>> +#define BTR_TSEG2_SHIFT 4
>>> +#define BTR_TSEG2_MASK (0xf << BTR_TSEG2_SHIFT)
>>> +#define BTR_SJW_SHIFT 0
>>> +#define BTR_SJW_MASK 0xf
>>> +
>>> +/* Error Counter Register(ECR) */
>>> +#define ECR_RP BIT(15)
>>> +#define ECR_REC_SHIFT 8
>>> +#define ECR_REC_MASK (0x7f << ECR_REC_SHIFT)
>>> +#define ECR_TEC_SHIFT 0
>>> +#define ECR_TEC_MASK 0xff
>>> +
>>> +/* Protocol Status Register(PSR) */
>>> +#define PSR_BO BIT(7)
>>> +#define PSR_EW BIT(6)
>>> +#define PSR_EP BIT(5)
>>> +#define PSR_LEC_MASK 0x7
>>> +
>>> +/* Interrupt Register(IR) */
>>> +#define IR_ALL_INT 0xffffffff
>>> +#define IR_STE BIT(31)
>>> +#define IR_FOE BIT(30)
>>> +#define IR_ACKE BIT(29)
>>> +#define IR_BE BIT(28)
>>> +#define IR_CRCE BIT(27)
>>> +#define IR_WDI BIT(26)
>>> +#define IR_BO BIT(25)
>>> +#define IR_EW BIT(24)
>>> +#define IR_EP BIT(23)
>>> +#define IR_ELO BIT(22)
>>> +#define IR_BEU BIT(21)
>>> +#define IR_BEC BIT(20)
>>> +#define IR_DRX BIT(19)
>>> +#define IR_TOO BIT(18)
>>> +#define IR_MRAF BIT(17)
>>> +#define IR_TSW BIT(16)
>>> +#define IR_TEFL BIT(15)
>>> +#define IR_TEFF BIT(14)
>>> +#define IR_TEFW BIT(13)
>>> +#define IR_TEFN BIT(12)
>>> +#define IR_TFE BIT(11)
>>> +#define IR_TCF BIT(10)
>>> +#define IR_TC BIT(9)
>>> +#define IR_HPM BIT(8)
>>> +#define IR_RF1L BIT(7)
>>> +#define IR_RF1F BIT(6)
>>> +#define IR_RF1W BIT(5)
>>> +#define IR_RF1N BIT(4)
>>> +#define IR_RF0L BIT(3)
>>> +#define IR_RF0F BIT(2)
>>> +#define IR_RF0W BIT(1)
>>> +#define IR_RF0N BIT(0)
>>> +#define IR_ERR_STATE (IR_BO | IR_EW | IR_EP)
>>> +#define IR_ERR_LEC (IR_STE | IR_FOE | IR_ACKE | IR_BE | IR_CRCE)
>>> +#define IR_ERR_BUS (IR_ERR_LEC | IR_WDI | IR_ELO | IR_BEU | IR_BEC \
>>> + | IR_TOO | IR_MRAF | IR_TSW | IR_TEFL | IR_RF1L \
>>> + | IR_RF0L)
>>> +#define IR_ERR_ALL (IR_ERR_STATE | IR_ERR_BUS)
>>> +
>>> +/* Interrupt Line Select (ILS) */
>>> +#define ILS_ALL_INT0 0x0
>>> +#define ILS_ALL_INT1 0xFFFFFFFF
>>> +
>>> +/* Interrupt Line Enable (ILE) */
>>> +#define ILE_EINT0 BIT(0)
>>> +#define ILE_EINT1 BIT(1)
>>> +
>>> +/* Rx FIFO 0/1 Configuration (RXF0C/RXF1C) */
>>> +#define RXFC_FWM_OFF 24
>>> +#define RXFC_FWM_MASK 0x7f
>>> +#define RXFC_FWM_1 (1 << RXFC_FWM_OFF)
>>> +#define RXFC_FS_OFF 16
>>> +#define RXFC_FS_MASK 0x7f
>>> +
>>> +/* Rx FIFO 0/1 Status (RXF0S/RXF1S) */
>>> +#define RXFS_RFL BIT(25)
>>> +#define RXFS_FF BIT(24)
>>> +#define RXFS_FPI_OFF 16
>>> +#define RXFS_FPI_MASK 0x3f0000
>>> +#define RXFS_FGI_OFF 8
>>> +#define RXFS_FGI_MASK 0x3f00
>>> +#define RXFS_FFL_MASK 0x7f
>>> +
>>> +/* Tx Buffer Configuration(TXBC) */
>>> +#define TXBC_NDTB_OFF 16
>>> +#define TXBC_NDTB_MASK 0x3f
>>> +
>>> +/* Tx Buffer Element Size Configuration(TXESC) */
>>> +#define TXESC_TBDS_8BYTES 0x0
>>> +/* Tx Buffer Element */
>>> +#define TX_BUF_XTD BIT(30)
>>> +#define TX_BUF_RTR BIT(29)
>>> +
>>> +/* Rx Buffer Element Size Configuration(TXESC) */
>>> +#define M_CAN_RXESC_8BYTES 0x0
>>> +/* Tx Buffer Element */
>>> +#define RX_BUF_ESI BIT(31)
>>> +#define RX_BUF_XTD BIT(30)
>>> +#define RX_BUF_RTR BIT(29)
>>> +
>>> +/* Tx Event FIFO Con.guration (TXEFC) */
>>> +#define TXEFC_EFS_OFF 16
>>> +#define TXEFC_EFS_MASK 0x3f
>>> +
>>> +/* Message RAM Configuration (in bytes) */
>>> +#define SIDF_ELEMENT_SIZE 4
>>> +#define XIDF_ELEMENT_SIZE 8
>>> +#define RXF0_ELEMENT_SIZE 16
>>> +#define RXF1_ELEMENT_SIZE 16
>>> +#define RXB_ELEMENT_SIZE 16
>>> +#define TXE_ELEMENT_SIZE 8
>>> +#define TXB_ELEMENT_SIZE 16
>>> Alignment for all the includes
>>>
>> What do you mean?
>>
> I mean all the #define from top not aligned.
> It would be looks good if aligned properly.
>
> Give common tab spaces for all the #defines...
As I argumented in my other mail, I prefer one space, so no alignment.
Marc
--
Pengutronix e.K. | Marc Kleine-Budde |
Industrial Linux Solutions | Phone: +49-231-2826-924 |
Vertretung West/Dortmund | Fax: +49-5121-206917-5555 |
Amtsgericht Hildesheim, HRA 2686 | http://www.pengutronix.de |
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 242 bytes --]
WARNING: multiple messages have this Message-ID (diff)
From: mkl@pengutronix.de (Marc Kleine-Budde)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v4 2/2] can: m_can: add Bosch M_CAN controller support
Date: Tue, 15 Jul 2014 09:10:52 +0200 [thread overview]
Message-ID: <53C4D3FC.1030401@pengutronix.de> (raw)
In-Reply-To: <53C4D0B6.4010302@gmail.com>
On 07/15/2014 08:56 AM, Varka Bhadram wrote:
> On 07/15/2014 11:57 AM, Dong Aisheng wrote:
>> On Mon, Jul 14, 2014 at 06:17:17PM +0530, Varka Bhadram wrote:
>>>
>>> +/* Test Register (TEST) */
>>> +#define TEST_LBCK BIT(4)
>>> +
>>> +/* CC Control Register(CCCR) */
>>> +#define CCCR_TEST BIT(7)
>>> +#define CCCR_MON BIT(5)
>>> +#define CCCR_CCE BIT(1)
>>> +#define CCCR_INIT BIT(0)
>>> +
>>> +/* Bit Timing & Prescaler Register (BTP) */
>>> +#define BTR_BRP_MASK 0x3ff
>>> +#define BTR_BRP_SHIFT 16
>>> +#define BTR_TSEG1_SHIFT 8
>>> +#define BTR_TSEG1_MASK (0x3f << BTR_TSEG1_SHIFT)
>>> +#define BTR_TSEG2_SHIFT 4
>>> +#define BTR_TSEG2_MASK (0xf << BTR_TSEG2_SHIFT)
>>> +#define BTR_SJW_SHIFT 0
>>> +#define BTR_SJW_MASK 0xf
>>> +
>>> +/* Error Counter Register(ECR) */
>>> +#define ECR_RP BIT(15)
>>> +#define ECR_REC_SHIFT 8
>>> +#define ECR_REC_MASK (0x7f << ECR_REC_SHIFT)
>>> +#define ECR_TEC_SHIFT 0
>>> +#define ECR_TEC_MASK 0xff
>>> +
>>> +/* Protocol Status Register(PSR) */
>>> +#define PSR_BO BIT(7)
>>> +#define PSR_EW BIT(6)
>>> +#define PSR_EP BIT(5)
>>> +#define PSR_LEC_MASK 0x7
>>> +
>>> +/* Interrupt Register(IR) */
>>> +#define IR_ALL_INT 0xffffffff
>>> +#define IR_STE BIT(31)
>>> +#define IR_FOE BIT(30)
>>> +#define IR_ACKE BIT(29)
>>> +#define IR_BE BIT(28)
>>> +#define IR_CRCE BIT(27)
>>> +#define IR_WDI BIT(26)
>>> +#define IR_BO BIT(25)
>>> +#define IR_EW BIT(24)
>>> +#define IR_EP BIT(23)
>>> +#define IR_ELO BIT(22)
>>> +#define IR_BEU BIT(21)
>>> +#define IR_BEC BIT(20)
>>> +#define IR_DRX BIT(19)
>>> +#define IR_TOO BIT(18)
>>> +#define IR_MRAF BIT(17)
>>> +#define IR_TSW BIT(16)
>>> +#define IR_TEFL BIT(15)
>>> +#define IR_TEFF BIT(14)
>>> +#define IR_TEFW BIT(13)
>>> +#define IR_TEFN BIT(12)
>>> +#define IR_TFE BIT(11)
>>> +#define IR_TCF BIT(10)
>>> +#define IR_TC BIT(9)
>>> +#define IR_HPM BIT(8)
>>> +#define IR_RF1L BIT(7)
>>> +#define IR_RF1F BIT(6)
>>> +#define IR_RF1W BIT(5)
>>> +#define IR_RF1N BIT(4)
>>> +#define IR_RF0L BIT(3)
>>> +#define IR_RF0F BIT(2)
>>> +#define IR_RF0W BIT(1)
>>> +#define IR_RF0N BIT(0)
>>> +#define IR_ERR_STATE (IR_BO | IR_EW | IR_EP)
>>> +#define IR_ERR_LEC (IR_STE | IR_FOE | IR_ACKE | IR_BE | IR_CRCE)
>>> +#define IR_ERR_BUS (IR_ERR_LEC | IR_WDI | IR_ELO | IR_BEU | IR_BEC \
>>> + | IR_TOO | IR_MRAF | IR_TSW | IR_TEFL | IR_RF1L \
>>> + | IR_RF0L)
>>> +#define IR_ERR_ALL (IR_ERR_STATE | IR_ERR_BUS)
>>> +
>>> +/* Interrupt Line Select (ILS) */
>>> +#define ILS_ALL_INT0 0x0
>>> +#define ILS_ALL_INT1 0xFFFFFFFF
>>> +
>>> +/* Interrupt Line Enable (ILE) */
>>> +#define ILE_EINT0 BIT(0)
>>> +#define ILE_EINT1 BIT(1)
>>> +
>>> +/* Rx FIFO 0/1 Configuration (RXF0C/RXF1C) */
>>> +#define RXFC_FWM_OFF 24
>>> +#define RXFC_FWM_MASK 0x7f
>>> +#define RXFC_FWM_1 (1 << RXFC_FWM_OFF)
>>> +#define RXFC_FS_OFF 16
>>> +#define RXFC_FS_MASK 0x7f
>>> +
>>> +/* Rx FIFO 0/1 Status (RXF0S/RXF1S) */
>>> +#define RXFS_RFL BIT(25)
>>> +#define RXFS_FF BIT(24)
>>> +#define RXFS_FPI_OFF 16
>>> +#define RXFS_FPI_MASK 0x3f0000
>>> +#define RXFS_FGI_OFF 8
>>> +#define RXFS_FGI_MASK 0x3f00
>>> +#define RXFS_FFL_MASK 0x7f
>>> +
>>> +/* Tx Buffer Configuration(TXBC) */
>>> +#define TXBC_NDTB_OFF 16
>>> +#define TXBC_NDTB_MASK 0x3f
>>> +
>>> +/* Tx Buffer Element Size Configuration(TXESC) */
>>> +#define TXESC_TBDS_8BYTES 0x0
>>> +/* Tx Buffer Element */
>>> +#define TX_BUF_XTD BIT(30)
>>> +#define TX_BUF_RTR BIT(29)
>>> +
>>> +/* Rx Buffer Element Size Configuration(TXESC) */
>>> +#define M_CAN_RXESC_8BYTES 0x0
>>> +/* Tx Buffer Element */
>>> +#define RX_BUF_ESI BIT(31)
>>> +#define RX_BUF_XTD BIT(30)
>>> +#define RX_BUF_RTR BIT(29)
>>> +
>>> +/* Tx Event FIFO Con.guration (TXEFC) */
>>> +#define TXEFC_EFS_OFF 16
>>> +#define TXEFC_EFS_MASK 0x3f
>>> +
>>> +/* Message RAM Configuration (in bytes) */
>>> +#define SIDF_ELEMENT_SIZE 4
>>> +#define XIDF_ELEMENT_SIZE 8
>>> +#define RXF0_ELEMENT_SIZE 16
>>> +#define RXF1_ELEMENT_SIZE 16
>>> +#define RXB_ELEMENT_SIZE 16
>>> +#define TXE_ELEMENT_SIZE 8
>>> +#define TXB_ELEMENT_SIZE 16
>>> Alignment for all the includes
>>>
>> What do you mean?
>>
> I mean all the #define from top not aligned.
> It would be looks good if aligned properly.
>
> Give common tab spaces for all the #defines...
As I argumented in my other mail, I prefer one space, so no alignment.
Marc
--
Pengutronix e.K. | Marc Kleine-Budde |
Industrial Linux Solutions | Phone: +49-231-2826-924 |
Vertretung West/Dortmund | Fax: +49-5121-206917-5555 |
Amtsgericht Hildesheim, HRA 2686 | http://www.pengutronix.de |
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 242 bytes
Desc: OpenPGP digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20140715/9ee3cb2b/attachment.sig>
next prev parent reply other threads:[~2014-07-15 7:11 UTC|newest]
Thread overview: 44+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-07-14 11:40 [PATCH v4 1/2] can: m_can: add device tree binding documentation Dong Aisheng
2014-07-14 11:40 ` Dong Aisheng
2014-07-14 11:40 ` [PATCH v4 2/2] can: m_can: add Bosch M_CAN controller support Dong Aisheng
2014-07-14 11:40 ` Dong Aisheng
2014-07-14 12:13 ` Marc Kleine-Budde
2014-07-14 12:13 ` Marc Kleine-Budde
2014-07-15 3:33 ` Dong Aisheng
2014-07-15 3:33 ` Dong Aisheng
2014-07-15 7:29 ` Marc Kleine-Budde
2014-07-15 7:29 ` Marc Kleine-Budde
2014-07-15 8:26 ` Dong Aisheng
2014-07-15 8:26 ` Dong Aisheng
2014-07-15 8:46 ` Marc Kleine-Budde
2014-07-15 8:46 ` Marc Kleine-Budde
2014-07-15 9:07 ` Dong Aisheng
2014-07-15 9:07 ` Dong Aisheng
2014-07-15 9:21 ` Marc Kleine-Budde
2014-07-15 9:21 ` Marc Kleine-Budde
2014-07-15 10:40 ` Dong Aisheng
2014-07-15 10:40 ` Dong Aisheng
2014-07-14 12:47 ` Varka Bhadram
2014-07-14 12:47 ` Varka Bhadram
2014-07-14 13:01 ` Marc Kleine-Budde
2014-07-14 13:01 ` Marc Kleine-Budde
2014-07-14 13:15 ` Varka Bhadram
2014-07-14 13:15 ` Varka Bhadram
2014-07-15 6:28 ` Dong Aisheng
2014-07-15 6:28 ` Dong Aisheng
2014-07-15 6:27 ` Dong Aisheng
2014-07-15 6:27 ` Dong Aisheng
2014-07-15 6:56 ` Varka Bhadram
2014-07-15 6:56 ` Varka Bhadram
2014-07-15 7:10 ` Marc Kleine-Budde [this message]
2014-07-15 7:10 ` Marc Kleine-Budde
2014-07-15 7:15 ` Varka Bhadram
2014-07-15 7:15 ` Varka Bhadram
2014-07-15 7:14 ` Dong Aisheng
2014-07-15 7:14 ` Dong Aisheng
2014-07-15 7:20 ` Varka Bhadram
2014-07-15 7:20 ` Varka Bhadram
2014-07-14 11:52 ` [PATCH v4 1/2] can: m_can: add device tree binding documentation Marc Kleine-Budde
2014-07-14 11:52 ` Marc Kleine-Budde
2014-07-15 2:26 ` Dong Aisheng
2014-07-15 2:26 ` Dong Aisheng
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=53C4D3FC.1030401@pengutronix.de \
--to=mkl@pengutronix.de \
--cc=b29396@freescale.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-can@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=socketcan@hartkopp.net \
--cc=varkabhadram@gmail.com \
--cc=wg@grandegger.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.