From: Kukjin Kim <kgene.kim@samsung.com>
To: Sylwester Nawrocki <s.nawrocki@samsung.com>
Cc: kgene.kim@samsung.com, linux-samsung-soc@vger.kernel.org,
linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH] ARM: dts: Add sound nodes for Odroid-X2/U3 boards
Date: Wed, 16 Jul 2014 03:18:45 +0900 [thread overview]
Message-ID: <53C57085.4020905@samsung.com> (raw)
In-Reply-To: <1405350752-25795-1-git-send-email-s.nawrocki@samsung.com>
On 07/15/14 00:12, Sylwester Nawrocki wrote:
> Add MAX98090 audio codec, I2S interface and the sound complex
> nodes to enable audio on Odroid-X2/U3 boards.
>
> Signed-off-by: Sylwester Nawrocki<s.nawrocki@samsung.com>
> ---
> This patch depends on the series from Marek [1] adding dt sources
> for Odroid X2/U3. My testing branch can be pulled from [2].
>
> [1] http://www.spinics.net/lists/linux-samsung-soc/msg32544.html
> [2] git://linuxtv.org/snawrocki/samsung.git v3.16-rc5-odroid-sound
>
> arch/arm/boot/dts/exynos4412-odroid-common.dtsi | 27 +++++++++++++++++++++++
> arch/arm/boot/dts/exynos4412-odroidu3.dts | 12 ++++++++++
> arch/arm/boot/dts/exynos4412-odroidx2.dts | 9 ++++++++
> 3 files changed, 48 insertions(+)
>
> diff --git a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
> index 0bc1a9b..6d6d23c 100644
> --- a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
> +++ b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
> @@ -32,6 +32,21 @@
> };
> };
>
> + i2s0: i2s@03830000 {
> + pinctrl-0 =<&i2s0_bus>;
> + pinctrl-names = "default";
> + status = "okay";
> + clocks =<&clock_audss EXYNOS_I2S_BUS>,
> + <&clock_audss EXYNOS_DOUT_AUD_BUS>;
> + clock-names = "iis", "i2s_opclk0";
> + };
> +
> + sound: sound {
> + compatible = "samsung,odroidx2-audio";
> + samsung,i2s-controller =<&i2s0>;
> + samsung,audio-codec =<&max98090>;
> + };
> +
> mmc@12550000 {
> pinctrl-0 =<&sd4_clk&sd4_cmd&sd4_bus4&sd4_bus8>;
> pinctrl-names = "default";
> @@ -321,6 +336,18 @@
> };
> };
>
> + i2c@13870000 {
> + pinctrl-names = "default";
> + pinctrl-0 =<&i2c1_bus>;
> + status = "okay";
> + max98090: max98090@10 {
> + compatible = "maxim,max98090";
> + reg =<0x10>;
> + interrupt-parent =<&gpx0>;
> + interrupts =<0 0>;
> + };
> + };
> +
> exynos-usbphy@125B0000 {
> status = "okay";
> };
> diff --git a/arch/arm/boot/dts/exynos4412-odroidu3.dts b/arch/arm/boot/dts/exynos4412-odroidu3.dts
> index 287aa0d..c8a64be 100644
> --- a/arch/arm/boot/dts/exynos4412-odroidu3.dts
> +++ b/arch/arm/boot/dts/exynos4412-odroidu3.dts
> @@ -47,3 +47,15 @@
> status = "okay";
> };
> };
> +
> +&sound {
> + compatible = "samsung,odroidu3-audio";
> + samsung,model = "Odroid-U3";
> + samsung,audio-routing =
> + "Headphone Jack", "HPL",
> + "Headphone Jack", "HPR",
> + "Headphone Jack", "MICBIAS",
> + "IN1", "Headphone Jack",
> + "Speakers", "SPKL",
> + "Speakers", "SPKR";
> +};
> diff --git a/arch/arm/boot/dts/exynos4412-odroidx2.dts b/arch/arm/boot/dts/exynos4412-odroidx2.dts
> index e9ae161..96b43f4 100644
> --- a/arch/arm/boot/dts/exynos4412-odroidx2.dts
> +++ b/arch/arm/boot/dts/exynos4412-odroidx2.dts
> @@ -21,3 +21,12 @@
> reg =<0x40000000 0x7FF00000>;
> };
> };
> +
> +&sound {
> + samsung,model = "Odroid-X2";
> + samsung,audio-routing =
> + "Headphone Jack", "HPL",
> + "Headphone Jack", "HPR",
> + "IN1", "Mic Jack",
> + "Mic Jack", "MICBIAS";
> +};
> --
Applied, thanks.
- Kukjin
WARNING: multiple messages have this Message-ID (diff)
From: kgene.kim@samsung.com (Kukjin Kim)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH] ARM: dts: Add sound nodes for Odroid-X2/U3 boards
Date: Wed, 16 Jul 2014 03:18:45 +0900 [thread overview]
Message-ID: <53C57085.4020905@samsung.com> (raw)
In-Reply-To: <1405350752-25795-1-git-send-email-s.nawrocki@samsung.com>
On 07/15/14 00:12, Sylwester Nawrocki wrote:
> Add MAX98090 audio codec, I2S interface and the sound complex
> nodes to enable audio on Odroid-X2/U3 boards.
>
> Signed-off-by: Sylwester Nawrocki<s.nawrocki@samsung.com>
> ---
> This patch depends on the series from Marek [1] adding dt sources
> for Odroid X2/U3. My testing branch can be pulled from [2].
>
> [1] http://www.spinics.net/lists/linux-samsung-soc/msg32544.html
> [2] git://linuxtv.org/snawrocki/samsung.git v3.16-rc5-odroid-sound
>
> arch/arm/boot/dts/exynos4412-odroid-common.dtsi | 27 +++++++++++++++++++++++
> arch/arm/boot/dts/exynos4412-odroidu3.dts | 12 ++++++++++
> arch/arm/boot/dts/exynos4412-odroidx2.dts | 9 ++++++++
> 3 files changed, 48 insertions(+)
>
> diff --git a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
> index 0bc1a9b..6d6d23c 100644
> --- a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
> +++ b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
> @@ -32,6 +32,21 @@
> };
> };
>
> + i2s0: i2s at 03830000 {
> + pinctrl-0 =<&i2s0_bus>;
> + pinctrl-names = "default";
> + status = "okay";
> + clocks =<&clock_audss EXYNOS_I2S_BUS>,
> + <&clock_audss EXYNOS_DOUT_AUD_BUS>;
> + clock-names = "iis", "i2s_opclk0";
> + };
> +
> + sound: sound {
> + compatible = "samsung,odroidx2-audio";
> + samsung,i2s-controller =<&i2s0>;
> + samsung,audio-codec =<&max98090>;
> + };
> +
> mmc at 12550000 {
> pinctrl-0 =<&sd4_clk&sd4_cmd&sd4_bus4&sd4_bus8>;
> pinctrl-names = "default";
> @@ -321,6 +336,18 @@
> };
> };
>
> + i2c at 13870000 {
> + pinctrl-names = "default";
> + pinctrl-0 =<&i2c1_bus>;
> + status = "okay";
> + max98090: max98090 at 10 {
> + compatible = "maxim,max98090";
> + reg =<0x10>;
> + interrupt-parent =<&gpx0>;
> + interrupts =<0 0>;
> + };
> + };
> +
> exynos-usbphy at 125B0000 {
> status = "okay";
> };
> diff --git a/arch/arm/boot/dts/exynos4412-odroidu3.dts b/arch/arm/boot/dts/exynos4412-odroidu3.dts
> index 287aa0d..c8a64be 100644
> --- a/arch/arm/boot/dts/exynos4412-odroidu3.dts
> +++ b/arch/arm/boot/dts/exynos4412-odroidu3.dts
> @@ -47,3 +47,15 @@
> status = "okay";
> };
> };
> +
> +&sound {
> + compatible = "samsung,odroidu3-audio";
> + samsung,model = "Odroid-U3";
> + samsung,audio-routing =
> + "Headphone Jack", "HPL",
> + "Headphone Jack", "HPR",
> + "Headphone Jack", "MICBIAS",
> + "IN1", "Headphone Jack",
> + "Speakers", "SPKL",
> + "Speakers", "SPKR";
> +};
> diff --git a/arch/arm/boot/dts/exynos4412-odroidx2.dts b/arch/arm/boot/dts/exynos4412-odroidx2.dts
> index e9ae161..96b43f4 100644
> --- a/arch/arm/boot/dts/exynos4412-odroidx2.dts
> +++ b/arch/arm/boot/dts/exynos4412-odroidx2.dts
> @@ -21,3 +21,12 @@
> reg =<0x40000000 0x7FF00000>;
> };
> };
> +
> +&sound {
> + samsung,model = "Odroid-X2";
> + samsung,audio-routing =
> + "Headphone Jack", "HPL",
> + "Headphone Jack", "HPR",
> + "IN1", "Mic Jack",
> + "Mic Jack", "MICBIAS";
> +};
> --
Applied, thanks.
- Kukjin
next prev parent reply other threads:[~2014-07-15 18:18 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-07-14 15:12 [PATCH] ARM: dts: Add sound nodes for Odroid-X2/U3 boards Sylwester Nawrocki
2014-07-14 15:12 ` Sylwester Nawrocki
2014-07-15 18:18 ` Kukjin Kim [this message]
2014-07-15 18:18 ` Kukjin Kim
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=53C57085.4020905@samsung.com \
--to=kgene.kim@samsung.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=s.nawrocki@samsung.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.