* [Ocfs2-devel] [PATCH] ocfs2: reflink: fix slow unlink for refcounted file @ 2014-07-25 5:32 Junxiao Bi 2014-07-25 5:49 ` Wengang 0 siblings, 1 reply; 4+ messages in thread From: Junxiao Bi @ 2014-07-25 5:32 UTC (permalink / raw) To: ocfs2-devel When running ocfs2 test suite multiple nodes reflink stress test, for a 4 nodes cluster, every unlink() for refcounted file needs about 700s. The slow unlink is caused by the contention of refcount tree lock since all nodes are unlink files using the same refcount tree. When the unlinking file have many extents(over 1600 in our test), most of the extents has refcounted flag set. In ocfs2_commit_truncate(), it will execute the following call trace for every extents. This means it needs get and released refcount tree lock about 1600 times. And when several nodes are do this at the same time, the performance will be very low. . ocfs2_remove_btree_range() ----ocfs2_lock_refcount_tree() ------ocfs2_refcount_lock() --------__ocfs2_cluster_lock() ocfs2_refcount_lock() is costly, move it to ocfs2_commit_truncate() to do lock/unlock once can improve a lot performance. Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com> --- fs/ocfs2/alloc.c | 22 ++++++++++++---------- 1 file changed, 12 insertions(+), 10 deletions(-) diff --git a/fs/ocfs2/alloc.c b/fs/ocfs2/alloc.c index 9d8fcf2..a764363 100644 --- a/fs/ocfs2/alloc.c +++ b/fs/ocfs2/alloc.c @@ -5667,13 +5667,6 @@ int ocfs2_remove_btree_range(struct inode *inode, BUG_ON(!(OCFS2_I(inode)->ip_dyn_features & OCFS2_HAS_REFCOUNT_FL)); - ret = ocfs2_lock_refcount_tree(osb, refcount_loc, 1, - &ref_tree, NULL); - if (ret) { - mlog_errno(ret); - goto bail; - } - ret = ocfs2_prepare_refcount_change_for_del(inode, refcount_loc, phys_blkno, @@ -5755,9 +5748,6 @@ bail: if (meta_ac) ocfs2_free_alloc_context(meta_ac); - if (ref_tree) - ocfs2_unlock_refcount_tree(osb, ref_tree, 1); - return ret; } @@ -7012,6 +7002,7 @@ int ocfs2_commit_truncate(struct ocfs2_super *osb, u64 refcount_loc = le64_to_cpu(di->i_refcount_loc); struct ocfs2_extent_tree et; struct ocfs2_cached_dealloc_ctxt dealloc; + struct ocfs2_refcount_tree *ref_tree = NULL; ocfs2_init_dinode_extent_tree(&et, INODE_CACHE(inode), di_bh); ocfs2_init_dealloc_ctxt(&dealloc); @@ -7121,6 +7112,15 @@ start: phys_cpos = ocfs2_blocks_to_clusters(inode->i_sb, blkno); + if ((flags & OCFS2_EXT_REFCOUNTED) && trunc_len && !ref_tree) { + status = ocfs2_lock_refcount_tree(osb, refcount_loc, 1, + &ref_tree, NULL); + if (status) { + mlog_errno(status); + goto bail; + } + } + status = ocfs2_remove_btree_range(inode, &et, trunc_cpos, phys_cpos, trunc_len, flags, &dealloc, refcount_loc); @@ -7138,6 +7138,8 @@ start: goto start; bail: + if (ref_tree) + ocfs2_unlock_refcount_tree(osb, ref_tree, 1); ocfs2_schedule_truncate_log_flush(osb, 1); -- 1.7.9.5 ^ permalink raw reply related [flat|nested] 4+ messages in thread
* [Ocfs2-devel] [PATCH] ocfs2: reflink: fix slow unlink for refcounted file 2014-07-25 5:32 [Ocfs2-devel] [PATCH] ocfs2: reflink: fix slow unlink for refcounted file Junxiao Bi @ 2014-07-25 5:49 ` Wengang 2014-07-25 5:57 ` Wengang 0 siblings, 1 reply; 4+ messages in thread From: Wengang @ 2014-07-25 5:49 UTC (permalink / raw) To: ocfs2-devel Will it be safe to do the moving? There are three calls of ocfs2_remove_btree_range 1 7124 fs/ocfs2/alloc.c <<ocfs2_commit_truncate>> status = ocfs2_remove_btree_range(inode, &et, trunc_cpos, 2 4479 fs/ocfs2/dir.c <<ocfs2_dx_dir_truncate>> ret = ocfs2_remove_btree_range(dir, &et, cpos, p_cpos, clen, 0, 3 1805 fs/ocfs2/file.c <<ocfs2_remove_inode_range>> ret = ocfs2_remove_btree_range(inode, &et, trunc_cpos, Obviously, the 2nd and the 3rd are not sub-routines of ocfs2_commit_truncate(). I think this moving is not safe. thanks, wengang ? 2014?07?25? 13:32, Junxiao Bi ??: > When running ocfs2 test suite multiple nodes reflink stress test, for > a 4 nodes cluster, every unlink() for refcounted file needs about 700s. > > The slow unlink is caused by the contention of refcount tree lock since all > nodes are unlink files using the same refcount tree. When the unlinking file > have many extents(over 1600 in our test), most of the extents has refcounted > flag set. In ocfs2_commit_truncate(), it will execute the following call trace > for every extents. This means it needs get and released refcount tree lock > about 1600 times. And when several nodes are do this at the same time, the > performance will be very low. > . > ocfs2_remove_btree_range() > ----ocfs2_lock_refcount_tree() > ------ocfs2_refcount_lock() > --------__ocfs2_cluster_lock() > > ocfs2_refcount_lock() is costly, move it to ocfs2_commit_truncate() to do > lock/unlock once can improve a lot performance. > > Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com> > --- > fs/ocfs2/alloc.c | 22 ++++++++++++---------- > 1 file changed, 12 insertions(+), 10 deletions(-) > > diff --git a/fs/ocfs2/alloc.c b/fs/ocfs2/alloc.c > index 9d8fcf2..a764363 100644 > --- a/fs/ocfs2/alloc.c > +++ b/fs/ocfs2/alloc.c > @@ -5667,13 +5667,6 @@ int ocfs2_remove_btree_range(struct inode *inode, > BUG_ON(!(OCFS2_I(inode)->ip_dyn_features & > OCFS2_HAS_REFCOUNT_FL)); > > - ret = ocfs2_lock_refcount_tree(osb, refcount_loc, 1, > - &ref_tree, NULL); > - if (ret) { > - mlog_errno(ret); > - goto bail; > - } > - > ret = ocfs2_prepare_refcount_change_for_del(inode, > refcount_loc, > phys_blkno, > @@ -5755,9 +5748,6 @@ bail: > if (meta_ac) > ocfs2_free_alloc_context(meta_ac); > > - if (ref_tree) > - ocfs2_unlock_refcount_tree(osb, ref_tree, 1); > - > return ret; > } > > @@ -7012,6 +7002,7 @@ int ocfs2_commit_truncate(struct ocfs2_super *osb, > u64 refcount_loc = le64_to_cpu(di->i_refcount_loc); > struct ocfs2_extent_tree et; > struct ocfs2_cached_dealloc_ctxt dealloc; > + struct ocfs2_refcount_tree *ref_tree = NULL; > > ocfs2_init_dinode_extent_tree(&et, INODE_CACHE(inode), di_bh); > ocfs2_init_dealloc_ctxt(&dealloc); > @@ -7121,6 +7112,15 @@ start: > > phys_cpos = ocfs2_blocks_to_clusters(inode->i_sb, blkno); > > + if ((flags & OCFS2_EXT_REFCOUNTED) && trunc_len && !ref_tree) { > + status = ocfs2_lock_refcount_tree(osb, refcount_loc, 1, > + &ref_tree, NULL); > + if (status) { > + mlog_errno(status); > + goto bail; > + } > + } > + > status = ocfs2_remove_btree_range(inode, &et, trunc_cpos, > phys_cpos, trunc_len, flags, &dealloc, > refcount_loc); > @@ -7138,6 +7138,8 @@ start: > goto start; > > bail: > + if (ref_tree) > + ocfs2_unlock_refcount_tree(osb, ref_tree, 1); > > ocfs2_schedule_truncate_log_flush(osb, 1); > ^ permalink raw reply [flat|nested] 4+ messages in thread
* [Ocfs2-devel] [PATCH] ocfs2: reflink: fix slow unlink for refcounted file 2014-07-25 5:49 ` Wengang @ 2014-07-25 5:57 ` Wengang 2014-07-25 6:00 ` Junxiao Bi 0 siblings, 1 reply; 4+ messages in thread From: Wengang @ 2014-07-25 5:57 UTC (permalink / raw) To: ocfs2-devel You may want to add one more parameter to ocfs2_remove_btree_range indicating if the lock is already taken outside or not. If not taken, do the lock and unlock inside; otherwise, skip lock/unlock Will that work? thanks, wengang ? 2014?07?25? 13:49, Wengang ??: > Will it be safe to do the moving? > > There are three calls of ocfs2_remove_btree_range > > 1 7124 fs/ocfs2/alloc.c <<ocfs2_commit_truncate>> > status = ocfs2_remove_btree_range(inode, &et, trunc_cpos, > 2 4479 fs/ocfs2/dir.c <<ocfs2_dx_dir_truncate>> > ret = ocfs2_remove_btree_range(dir, &et, cpos, p_cpos, clen, 0, > 3 1805 fs/ocfs2/file.c <<ocfs2_remove_inode_range>> > ret = ocfs2_remove_btree_range(inode, &et, trunc_cpos, > > Obviously, the 2nd and the 3rd are not sub-routines of > ocfs2_commit_truncate(). > > I think this moving is not safe. > > thanks, > wengang > > ? 2014?07?25? 13:32, Junxiao Bi ??: >> When running ocfs2 test suite multiple nodes reflink stress test, for >> a 4 nodes cluster, every unlink() for refcounted file needs about 700s. >> >> The slow unlink is caused by the contention of refcount tree lock since all >> nodes are unlink files using the same refcount tree. When the unlinking file >> have many extents(over 1600 in our test), most of the extents has refcounted >> flag set. In ocfs2_commit_truncate(), it will execute the following call trace >> for every extents. This means it needs get and released refcount tree lock >> about 1600 times. And when several nodes are do this at the same time, the >> performance will be very low. >> . >> ocfs2_remove_btree_range() >> ----ocfs2_lock_refcount_tree() >> ------ocfs2_refcount_lock() >> --------__ocfs2_cluster_lock() >> >> ocfs2_refcount_lock() is costly, move it to ocfs2_commit_truncate() to do >> lock/unlock once can improve a lot performance. >> >> Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com> >> --- >> fs/ocfs2/alloc.c | 22 ++++++++++++---------- >> 1 file changed, 12 insertions(+), 10 deletions(-) >> >> diff --git a/fs/ocfs2/alloc.c b/fs/ocfs2/alloc.c >> index 9d8fcf2..a764363 100644 >> --- a/fs/ocfs2/alloc.c >> +++ b/fs/ocfs2/alloc.c >> @@ -5667,13 +5667,6 @@ int ocfs2_remove_btree_range(struct inode *inode, >> BUG_ON(!(OCFS2_I(inode)->ip_dyn_features & >> OCFS2_HAS_REFCOUNT_FL)); >> >> - ret = ocfs2_lock_refcount_tree(osb, refcount_loc, 1, >> - &ref_tree, NULL); >> - if (ret) { >> - mlog_errno(ret); >> - goto bail; >> - } >> - >> ret = ocfs2_prepare_refcount_change_for_del(inode, >> refcount_loc, >> phys_blkno, >> @@ -5755,9 +5748,6 @@ bail: >> if (meta_ac) >> ocfs2_free_alloc_context(meta_ac); >> >> - if (ref_tree) >> - ocfs2_unlock_refcount_tree(osb, ref_tree, 1); >> - >> return ret; >> } >> >> @@ -7012,6 +7002,7 @@ int ocfs2_commit_truncate(struct ocfs2_super *osb, >> u64 refcount_loc = le64_to_cpu(di->i_refcount_loc); >> struct ocfs2_extent_tree et; >> struct ocfs2_cached_dealloc_ctxt dealloc; >> + struct ocfs2_refcount_tree *ref_tree = NULL; >> >> ocfs2_init_dinode_extent_tree(&et, INODE_CACHE(inode), di_bh); >> ocfs2_init_dealloc_ctxt(&dealloc); >> @@ -7121,6 +7112,15 @@ start: >> >> phys_cpos = ocfs2_blocks_to_clusters(inode->i_sb, blkno); >> >> + if ((flags & OCFS2_EXT_REFCOUNTED) && trunc_len && !ref_tree) { >> + status = ocfs2_lock_refcount_tree(osb, refcount_loc, 1, >> + &ref_tree, NULL); >> + if (status) { >> + mlog_errno(status); >> + goto bail; >> + } >> + } >> + >> status = ocfs2_remove_btree_range(inode, &et, trunc_cpos, >> phys_cpos, trunc_len, flags, &dealloc, >> refcount_loc); >> @@ -7138,6 +7138,8 @@ start: >> goto start; >> >> bail: >> + if (ref_tree) >> + ocfs2_unlock_refcount_tree(osb, ref_tree, 1); >> >> ocfs2_schedule_truncate_log_flush(osb, 1); >> > > _______________________________________________ > Ocfs2-devel mailing list > Ocfs2-devel at oss.oracle.com > https://oss.oracle.com/mailman/listinfo/ocfs2-devel ^ permalink raw reply [flat|nested] 4+ messages in thread
* [Ocfs2-devel] [PATCH] ocfs2: reflink: fix slow unlink for refcounted file 2014-07-25 5:57 ` Wengang @ 2014-07-25 6:00 ` Junxiao Bi 0 siblings, 0 replies; 4+ messages in thread From: Junxiao Bi @ 2014-07-25 6:00 UTC (permalink / raw) To: ocfs2-devel On 07/25/2014 01:57 PM, Wengang wrote: > You may want to add one more parameter to ocfs2_remove_btree_range > indicating if the lock is already taken outside or not. > If not taken, do the lock and unlock inside; otherwise, skip lock/unlock > > Will that work? Yes, a good idea. With this, no need to move lock/unlock out for case 2 and 3. Thanks, Junxiao. > > > thanks, > wengang > > ? 2014?07?25? 13:49, Wengang ??: >> Will it be safe to do the moving? >> >> There are three calls of ocfs2_remove_btree_range >> >> 1 7124 fs/ocfs2/alloc.c <<ocfs2_commit_truncate>> >> status = ocfs2_remove_btree_range(inode, &et, trunc_cpos, >> 2 4479 fs/ocfs2/dir.c <<ocfs2_dx_dir_truncate>> >> ret = ocfs2_remove_btree_range(dir, &et, cpos, p_cpos, clen, 0, >> 3 1805 fs/ocfs2/file.c <<ocfs2_remove_inode_range>> >> ret = ocfs2_remove_btree_range(inode, &et, trunc_cpos, >> >> Obviously, the 2nd and the 3rd are not sub-routines of >> ocfs2_commit_truncate(). >> >> I think this moving is not safe. >> >> thanks, >> wengang >> >> ? 2014?07?25? 13:32, Junxiao Bi ??: >>> When running ocfs2 test suite multiple nodes reflink stress test, for >>> a 4 nodes cluster, every unlink() for refcounted file needs about 700s. >>> >>> The slow unlink is caused by the contention of refcount tree lock >>> since all >>> nodes are unlink files using the same refcount tree. When the >>> unlinking file >>> have many extents(over 1600 in our test), most of the extents has >>> refcounted >>> flag set. In ocfs2_commit_truncate(), it will execute the following >>> call trace >>> for every extents. This means it needs get and released refcount >>> tree lock >>> about 1600 times. And when several nodes are do this at the same >>> time, the >>> performance will be very low. >>> . >>> ocfs2_remove_btree_range() >>> ----ocfs2_lock_refcount_tree() >>> ------ocfs2_refcount_lock() >>> --------__ocfs2_cluster_lock() >>> >>> ocfs2_refcount_lock() is costly, move it to ocfs2_commit_truncate() >>> to do >>> lock/unlock once can improve a lot performance. >>> >>> Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com> >>> --- >>> fs/ocfs2/alloc.c | 22 ++++++++++++---------- >>> 1 file changed, 12 insertions(+), 10 deletions(-) >>> >>> diff --git a/fs/ocfs2/alloc.c b/fs/ocfs2/alloc.c >>> index 9d8fcf2..a764363 100644 >>> --- a/fs/ocfs2/alloc.c >>> +++ b/fs/ocfs2/alloc.c >>> @@ -5667,13 +5667,6 @@ int ocfs2_remove_btree_range(struct inode >>> *inode, >>> BUG_ON(!(OCFS2_I(inode)->ip_dyn_features & >>> OCFS2_HAS_REFCOUNT_FL)); >>> - ret = ocfs2_lock_refcount_tree(osb, refcount_loc, 1, >>> - &ref_tree, NULL); >>> - if (ret) { >>> - mlog_errno(ret); >>> - goto bail; >>> - } >>> - >>> ret = ocfs2_prepare_refcount_change_for_del(inode, >>> refcount_loc, >>> phys_blkno, >>> @@ -5755,9 +5748,6 @@ bail: >>> if (meta_ac) >>> ocfs2_free_alloc_context(meta_ac); >>> - if (ref_tree) >>> - ocfs2_unlock_refcount_tree(osb, ref_tree, 1); >>> - >>> return ret; >>> } >>> @@ -7012,6 +7002,7 @@ int ocfs2_commit_truncate(struct >>> ocfs2_super *osb, >>> u64 refcount_loc = le64_to_cpu(di->i_refcount_loc); >>> struct ocfs2_extent_tree et; >>> struct ocfs2_cached_dealloc_ctxt dealloc; >>> + struct ocfs2_refcount_tree *ref_tree = NULL; >>> ocfs2_init_dinode_extent_tree(&et, INODE_CACHE(inode), >>> di_bh); >>> ocfs2_init_dealloc_ctxt(&dealloc); >>> @@ -7121,6 +7112,15 @@ start: >>> phys_cpos = ocfs2_blocks_to_clusters(inode->i_sb, blkno); >>> + if ((flags & OCFS2_EXT_REFCOUNTED) && trunc_len && !ref_tree) { >>> + status = ocfs2_lock_refcount_tree(osb, refcount_loc, 1, >>> + &ref_tree, NULL); >>> + if (status) { >>> + mlog_errno(status); >>> + goto bail; >>> + } >>> + } >>> + >>> status = ocfs2_remove_btree_range(inode, &et, trunc_cpos, >>> phys_cpos, trunc_len, flags, &dealloc, >>> refcount_loc); >>> @@ -7138,6 +7138,8 @@ start: >>> goto start; >>> bail: >>> + if (ref_tree) >>> + ocfs2_unlock_refcount_tree(osb, ref_tree, 1); >>> ocfs2_schedule_truncate_log_flush(osb, 1); >>> >> >> _______________________________________________ >> Ocfs2-devel mailing list >> Ocfs2-devel at oss.oracle.com >> https://oss.oracle.com/mailman/listinfo/ocfs2-devel > ^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2014-07-25 6:00 UTC | newest] Thread overview: 4+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2014-07-25 5:32 [Ocfs2-devel] [PATCH] ocfs2: reflink: fix slow unlink for refcounted file Junxiao Bi 2014-07-25 5:49 ` Wengang 2014-07-25 5:57 ` Wengang 2014-07-25 6:00 ` Junxiao Bi
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.