All of lore.kernel.org
 help / color / mirror / Atom feed
From: Grygorii Strashko <grygorii.strashko-l0cyMroinI0@public.gmane.org>
To: Mark Brown <broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
Cc: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	Ian Campbell
	<ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org>,
	linux-spi-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
	santosh.shilimkar-l0cyMroinI0@public.gmane.org,
	Murali Karicheri <m-karicheri2-l0cyMroinI0@public.gmane.org>,
	linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
Subject: Re: [PATCH 2/2] spi: davinci: add support to configure gpio cs through dt
Date: Fri, 01 Aug 2014 20:29:04 +0300	[thread overview]
Message-ID: <53DBCE60.1010308@ti.com> (raw)
In-Reply-To: <53DBB202.1040509-l0cyMroinI0@public.gmane.org>

Hi Mark,

On 08/01/2014 06:28 PM, Grygorii Strashko wrote:
> Hi Mark,
> On 07/31/2014 10:35 PM, Mark Brown wrote:
>> On Thu, Jul 31, 2014 at 08:33:15PM +0300, Grygorii Strashko wrote:
>>
>>> +	if (np && master->cs_gpios != NULL && spi->cs_gpio >= 0) {
>>> +		/* SPI core parse and update master->cs_gpio */
>>>    		gpio_chipsel = true;
>>> +		gpio = spi->cs_gpio;
>>> +	} else if (pdata->chip_sel &&
>>> +		   chip_sel < pdata->num_chipselect &&
>>> +		   pdata->chip_sel[chip_sel] != SPI_INTERN_CS) {
>>> +		/* platform data defines chip_sel */
>>> +		gpio_chipsel = true;
>>> +		gpio = pdata->chip_sel[chip_sel];
>>> +	}
>>
>> This would all be a lot simpler and more direct if you were to arrange
>> to use cs_gpio in the struct spi_device, and move you closer to
>> converting to use more of the core functionality.
> 
> Unfortunately, I'm not sure this is good idea, because this part of
> code is used by Davinci arch which is non-DT platform.
> As result, this code was kept mostly unchanged.
> 
> I can try to rework it, but I'd like to do it as standalone patch.
> Is it ok for you?

I've just sent updated version with additional patch where
I reworked driver for using cs_gpio for  both DT and non-DT cases.
http://www.spinics.net/lists/arm-kernel/msg352382.html

Regards,
-grygorii
--
To unsubscribe from this list: send the line "unsubscribe linux-spi" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

WARNING: multiple messages have this Message-ID (diff)
From: grygorii.strashko@ti.com (Grygorii Strashko)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 2/2] spi: davinci: add support to configure gpio cs through dt
Date: Fri, 01 Aug 2014 20:29:04 +0300	[thread overview]
Message-ID: <53DBCE60.1010308@ti.com> (raw)
In-Reply-To: <53DBB202.1040509@ti.com>

Hi Mark,

On 08/01/2014 06:28 PM, Grygorii Strashko wrote:
> Hi Mark,
> On 07/31/2014 10:35 PM, Mark Brown wrote:
>> On Thu, Jul 31, 2014 at 08:33:15PM +0300, Grygorii Strashko wrote:
>>
>>> +	if (np && master->cs_gpios != NULL && spi->cs_gpio >= 0) {
>>> +		/* SPI core parse and update master->cs_gpio */
>>>    		gpio_chipsel = true;
>>> +		gpio = spi->cs_gpio;
>>> +	} else if (pdata->chip_sel &&
>>> +		   chip_sel < pdata->num_chipselect &&
>>> +		   pdata->chip_sel[chip_sel] != SPI_INTERN_CS) {
>>> +		/* platform data defines chip_sel */
>>> +		gpio_chipsel = true;
>>> +		gpio = pdata->chip_sel[chip_sel];
>>> +	}
>>
>> This would all be a lot simpler and more direct if you were to arrange
>> to use cs_gpio in the struct spi_device, and move you closer to
>> converting to use more of the core functionality.
> 
> Unfortunately, I'm not sure this is good idea, because this part of
> code is used by Davinci arch which is non-DT platform.
> As result, this code was kept mostly unchanged.
> 
> I can try to rework it, but I'd like to do it as standalone patch.
> Is it ok for you?

I've just sent updated version with additional patch where
I reworked driver for using cs_gpio for  both DT and non-DT cases.
http://www.spinics.net/lists/arm-kernel/msg352382.html

Regards,
-grygorii

  parent reply	other threads:[~2014-08-01 17:29 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-07-31 17:33 [PATCH 0/2] spi: davinci: add support for gpio cs through dt Grygorii Strashko
2014-07-31 17:33 ` Grygorii Strashko
2014-07-31 17:33 ` Grygorii Strashko
     [not found] ` <1406827995-30913-1-git-send-email-grygorii.strashko-l0cyMroinI0@public.gmane.org>
2014-07-31 17:33   ` [PATCH 1/2] spi: davinci: fix to support more than 2 chip selects Grygorii Strashko
2014-07-31 17:33     ` Grygorii Strashko
2014-07-31 17:33     ` Grygorii Strashko
     [not found]     ` <1406827995-30913-2-git-send-email-grygorii.strashko-l0cyMroinI0@public.gmane.org>
2014-07-31 19:35       ` Mark Brown
2014-07-31 19:35         ` Mark Brown
2014-07-31 17:33   ` [PATCH 2/2] spi: davinci: add support to configure gpio cs through dt Grygorii Strashko
2014-07-31 17:33     ` Grygorii Strashko
2014-07-31 17:33     ` Grygorii Strashko
     [not found]     ` <1406827995-30913-3-git-send-email-grygorii.strashko-l0cyMroinI0@public.gmane.org>
2014-07-31 19:35       ` Mark Brown
2014-07-31 19:35         ` Mark Brown
     [not found]         ` <20140731193515.GO17528-GFdadSzt00ze9xe1eoZjHA@public.gmane.org>
2014-08-01 15:28           ` Grygorii Strashko
2014-08-01 15:28             ` Grygorii Strashko
     [not found]             ` <53DBB202.1040509-l0cyMroinI0@public.gmane.org>
2014-08-01 17:29               ` Grygorii Strashko [this message]
2014-08-01 17:29                 ` Grygorii Strashko

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=53DBCE60.1010308@ti.com \
    --to=grygorii.strashko-l0cymroini0@public.gmane.org \
    --cc=broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
    --cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org \
    --cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
    --cc=linux-spi-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=m-karicheri2-l0cyMroinI0@public.gmane.org \
    --cc=robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
    --cc=santosh.shilimkar-l0cyMroinI0@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.