From: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
To: Thomas Abraham <thomas.ab@samsung.com>,
linux-pm@vger.kernel.org, linux-arm-kernel@lists.infradead.org
Cc: linux-samsung-soc@vger.kernel.org, mturquette@linaro.org,
kgene.kim@samsung.com, t.figa@samsung.com,
l.majewski@samsung.com, viresh.kumar@linaro.org, heiko@sntech.de,
cw00.choi@samsung.com, Doug Anderson <dianders@chromium.org>,
Andreas Faerber <afaerber@suse.de>,
Sachin Kamat <sachin.kamat@linaro.org>
Subject: Re: [PATCH v9 3/6] ARM: dts: Exynos: add CPU OPP and regulator supply property
Date: Sat, 02 Aug 2014 05:49:21 +0200 [thread overview]
Message-ID: <53DC5FC1.7060700@collabora.co.uk> (raw)
In-Reply-To: <1406707663-16656-4-git-send-email-thomas.ab@samsung.com>
Hello Thomas,
On 07/30/2014 10:07 AM, Thomas Abraham wrote:
> For Exynos 4210/5250/5420 based platforms, add CPU operating points and CPU
> regulator supply properties for migrating from Exynos specific cpufreq driver
> to using generic cpufreq drivers.
>
> Cc: Kukjin Kim <kgene.kim@samsung.com>
> Cc: Doug Anderson <dianders@chromium.org>
> Cc: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
> Cc: Andreas Faerber <afaerber@suse.de>
> Cc: Sachin Kamat <sachin.kamat@linaro.org>
> Signed-off-by: Thomas Abraham <thomas.ab@samsung.com>
> ---
> arch/arm/boot/dts/exynos4210-origen.dts | 4 +++
> arch/arm/boot/dts/exynos4210-trats.dts | 4 +++
> arch/arm/boot/dts/exynos4210-universal_c210.dts | 4 +++
> arch/arm/boot/dts/exynos4210.dtsi | 14 ++++++++-
> arch/arm/boot/dts/exynos5250-arndale.dts | 4 +++
> arch/arm/boot/dts/exynos5250-smdk5250.dts | 4 +++
> arch/arm/boot/dts/exynos5250-snow.dts | 4 +++
> arch/arm/boot/dts/exynos5250.dtsi | 25 ++++++++++++++-
> arch/arm/boot/dts/exynos5420.dtsi | 38 +++++++++++++++++++++++
> 9 files changed, 99 insertions(+), 2 deletions(-)
>
Tested the series on a Exynos5420 based Peach Pit Chromebook by doing the
following for CPU0-3:
1) Verified that the big.LITTLE CPUFreq (arm-big-little) driver was reported as
used in /sys/devices/system/cpu/cpu*/cpufreq/scaling_driver.
2) Set all available governors (conservative, ondemand, userspace, powersave and
performance).
3) Confirmed that cpuinfo_cur_freq and scaling_cur_freq values were fixed or
changing according to the selected governor policy.
4) Verified that the statistics in /sys/devices/system/cpu/cpu*/cpufreq/stats/*
were filled.
Everything is working correctly so please feel free to add for the whole series:
Tested-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Best regards,
Javier
WARNING: multiple messages have this Message-ID (diff)
From: javier.martinez@collabora.co.uk (Javier Martinez Canillas)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v9 3/6] ARM: dts: Exynos: add CPU OPP and regulator supply property
Date: Sat, 02 Aug 2014 05:49:21 +0200 [thread overview]
Message-ID: <53DC5FC1.7060700@collabora.co.uk> (raw)
In-Reply-To: <1406707663-16656-4-git-send-email-thomas.ab@samsung.com>
Hello Thomas,
On 07/30/2014 10:07 AM, Thomas Abraham wrote:
> For Exynos 4210/5250/5420 based platforms, add CPU operating points and CPU
> regulator supply properties for migrating from Exynos specific cpufreq driver
> to using generic cpufreq drivers.
>
> Cc: Kukjin Kim <kgene.kim@samsung.com>
> Cc: Doug Anderson <dianders@chromium.org>
> Cc: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
> Cc: Andreas Faerber <afaerber@suse.de>
> Cc: Sachin Kamat <sachin.kamat@linaro.org>
> Signed-off-by: Thomas Abraham <thomas.ab@samsung.com>
> ---
> arch/arm/boot/dts/exynos4210-origen.dts | 4 +++
> arch/arm/boot/dts/exynos4210-trats.dts | 4 +++
> arch/arm/boot/dts/exynos4210-universal_c210.dts | 4 +++
> arch/arm/boot/dts/exynos4210.dtsi | 14 ++++++++-
> arch/arm/boot/dts/exynos5250-arndale.dts | 4 +++
> arch/arm/boot/dts/exynos5250-smdk5250.dts | 4 +++
> arch/arm/boot/dts/exynos5250-snow.dts | 4 +++
> arch/arm/boot/dts/exynos5250.dtsi | 25 ++++++++++++++-
> arch/arm/boot/dts/exynos5420.dtsi | 38 +++++++++++++++++++++++
> 9 files changed, 99 insertions(+), 2 deletions(-)
>
Tested the series on a Exynos5420 based Peach Pit Chromebook by doing the
following for CPU0-3:
1) Verified that the big.LITTLE CPUFreq (arm-big-little) driver was reported as
used in /sys/devices/system/cpu/cpu*/cpufreq/scaling_driver.
2) Set all available governors (conservative, ondemand, userspace, powersave and
performance).
3) Confirmed that cpuinfo_cur_freq and scaling_cur_freq values were fixed or
changing according to the selected governor policy.
4) Verified that the statistics in /sys/devices/system/cpu/cpu*/cpufreq/stats/*
were filled.
Everything is working correctly so please feel free to add for the whole series:
Tested-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Best regards,
Javier
next prev parent reply other threads:[~2014-08-02 3:49 UTC|newest]
Thread overview: 121+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-07-30 8:07 [PATCH v9 0/6] cpufreq: use generic cpufreq drivers for exynos platforms Thomas Abraham
2014-07-30 8:07 ` Thomas Abraham
2014-07-30 8:07 ` [PATCH v9 1/6] clk: samsung: add infrastructure to register cpu clocks Thomas Abraham
2014-07-30 8:07 ` Thomas Abraham
2014-09-01 22:29 ` Mike Turquette
2014-09-01 22:29 ` Mike Turquette
2014-09-02 13:53 ` Thomas Abraham
2014-09-02 13:53 ` Thomas Abraham
2014-07-30 8:07 ` [PATCH v9 2/6] clk: samsung: add cpu clock configuration data and instantiate cpu clock Thomas Abraham
2014-07-30 8:07 ` Thomas Abraham
2014-09-01 22:29 ` Mike Turquette
2014-09-01 22:29 ` Mike Turquette
2014-07-30 8:07 ` [PATCH v9 3/6] ARM: dts: Exynos: add CPU OPP and regulator supply property Thomas Abraham
2014-07-30 8:07 ` Thomas Abraham
2014-07-30 11:28 ` Andreas Färber
2014-07-30 11:28 ` Andreas Färber
2014-07-31 2:55 ` Thomas Abraham
2014-07-31 2:55 ` Thomas Abraham
2014-07-31 0:37 ` Doug Anderson
2014-07-31 0:37 ` Doug Anderson
2014-07-31 3:21 ` Thomas Abraham
2014-07-31 3:21 ` Thomas Abraham
2014-07-31 3:53 ` Doug Anderson
2014-07-31 3:53 ` Doug Anderson
2014-07-31 4:06 ` Thomas Abraham
2014-07-31 4:06 ` Thomas Abraham
2014-07-31 4:08 ` Doug Anderson
2014-07-31 4:08 ` Doug Anderson
2014-07-31 4:18 ` Thomas Abraham
2014-07-31 4:18 ` Thomas Abraham
2014-08-02 3:49 ` Javier Martinez Canillas [this message]
2014-08-02 3:49 ` Javier Martinez Canillas
2014-08-04 3:00 ` Thomas Abraham
2014-08-04 3:00 ` Thomas Abraham
2014-07-30 8:07 ` [PATCH v9 4/6] ARM: Exynos: switch to using generic cpufreq driver for Exynos4210/5250/5420 Thomas Abraham
2014-07-30 8:07 ` Thomas Abraham
2014-07-31 18:32 ` Kukjin Kim
2014-07-31 18:32 ` Kukjin Kim
2014-07-31 18:40 ` Tomasz Figa
2014-07-31 18:40 ` Tomasz Figa
2014-07-31 18:54 ` Tomasz Figa
2014-07-31 18:54 ` Tomasz Figa
2014-07-31 19:25 ` Thomas Abraham
2014-07-31 19:25 ` Thomas Abraham
2014-07-31 19:30 ` Tomasz Figa
2014-07-31 19:30 ` Tomasz Figa
2014-08-04 3:24 ` Thomas Abraham
2014-08-04 3:24 ` Thomas Abraham
2014-08-22 23:54 ` Kevin Hilman
2014-08-22 23:54 ` Kevin Hilman
2014-08-23 0:02 ` Tomasz Figa
2014-08-23 0:02 ` Tomasz Figa
2014-08-25 6:53 ` Lukasz Majewski
2014-08-25 6:53 ` Lukasz Majewski
2014-08-25 12:15 ` Chander Kashyap
2014-08-25 12:15 ` Chander Kashyap
2014-08-25 15:32 ` Kevin Hilman
2014-08-25 15:32 ` Kevin Hilman
2014-08-25 15:56 ` Tomasz Figa
2014-08-25 15:56 ` Tomasz Figa
2014-08-26 4:54 ` Viresh Kumar
2014-08-26 4:54 ` Viresh Kumar
2014-08-26 5:25 ` Chander Kashyap
2014-08-26 5:25 ` Chander Kashyap
2014-08-26 15:15 ` Kevin Hilman
2014-08-26 15:15 ` Kevin Hilman
2014-08-26 22:25 ` Kevin Hilman
2014-08-26 22:25 ` Kevin Hilman
2014-08-29 12:52 ` Thomas Abraham
2014-08-29 12:52 ` Thomas Abraham
2014-08-29 15:03 ` Kevin Hilman
2014-08-29 15:03 ` Kevin Hilman
2014-09-01 8:47 ` Thomas Abraham
2014-09-01 8:47 ` Thomas Abraham
2014-09-02 19:32 ` Kevin Hilman
2014-09-02 19:32 ` Kevin Hilman
2014-09-03 4:26 ` Thomas Abraham
2014-09-03 4:26 ` Thomas Abraham
2014-09-03 13:18 ` Thomas Abraham
2014-09-03 13:18 ` Thomas Abraham
2014-09-03 23:15 ` Kevin Hilman
2014-09-03 23:15 ` Kevin Hilman
2014-09-04 10:22 ` Thomas Abraham
2014-09-04 13:30 ` Kevin Hilman
2014-09-04 13:30 ` Kevin Hilman
2014-09-05 13:41 ` Thomas Abraham
2014-09-05 13:41 ` Thomas Abraham
2014-08-25 8:11 ` Sjoerd Simons
2014-08-25 8:11 ` Sjoerd Simons
2014-07-30 8:07 ` [PATCH v9 5/6] cpufreq: exynos: remove exynos4210/5250 specific cpufreq driver support Thomas Abraham
2014-07-30 8:07 ` Thomas Abraham
2014-07-30 8:07 ` [PATCH v9 6/6] clk: samsung: remove unused clock aliases and update clock flags Thomas Abraham
2014-07-30 8:07 ` Thomas Abraham
2014-07-31 14:13 ` Tomasz Figa
2014-07-31 14:13 ` Tomasz Figa
2014-07-31 18:24 ` Thomas Abraham
2014-07-31 18:24 ` Thomas Abraham
2014-07-31 18:35 ` Tomasz Figa
2014-07-31 18:35 ` Tomasz Figa
2014-07-31 18:41 ` Thomas Abraham
2014-07-31 18:41 ` Thomas Abraham
2014-07-31 18:46 ` Tomasz Figa
2014-07-31 18:46 ` Tomasz Figa
2014-07-31 18:49 ` Thomas Abraham
2014-07-31 18:49 ` Thomas Abraham
2014-09-01 22:31 ` Mike Turquette
2014-09-01 22:31 ` Mike Turquette
2014-07-31 6:20 ` [PATCH v9 0/6] cpufreq: use generic cpufreq drivers for exynos platforms Chander M. Kashyap
2014-07-31 6:20 ` Chander M. Kashyap
2014-07-31 10:59 ` Thomas Abraham
2014-07-31 10:59 ` Thomas Abraham
2014-07-31 12:24 ` Chander M. Kashyap
2014-07-31 12:24 ` Chander M. Kashyap
2014-07-31 14:15 ` Tomasz Figa
2014-07-31 14:15 ` Tomasz Figa
2014-07-31 18:25 ` Thomas Abraham
2014-07-31 18:25 ` Thomas Abraham
2014-07-31 18:34 ` Thomas Abraham
2014-07-31 18:34 ` Thomas Abraham
2014-08-01 9:42 ` Viresh Kumar
2014-08-01 9:42 ` Viresh Kumar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=53DC5FC1.7060700@collabora.co.uk \
--to=javier.martinez@collabora.co.uk \
--cc=afaerber@suse.de \
--cc=cw00.choi@samsung.com \
--cc=dianders@chromium.org \
--cc=heiko@sntech.de \
--cc=kgene.kim@samsung.com \
--cc=l.majewski@samsung.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-pm@vger.kernel.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=mturquette@linaro.org \
--cc=sachin.kamat@linaro.org \
--cc=t.figa@samsung.com \
--cc=thomas.ab@samsung.com \
--cc=viresh.kumar@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.