[ath9k-devel] Enabling 4.9 GHz

[Pannirselvam Kanagaratnam <pannir@xsmail.com>]

Thanks Adrian. 2 & 3 are done. Will look into regdb.

Regards,

Pannir

On 03/08/2014 6:18 AM, Adrian Chadd wrote:
> hi!
>
> I think you'll have to hack up a custom regulatory domain database
> that includes the frequencies your device is licenced to work on.
>
> The things that need to happen:
>
> * regdb support, or the driver/802.11 layer won't let you do anything;
> * make sure your AR9590 has the "I'm allowed to do 4.9GHz!" bit in the
> OTP EEPROM set, or the NIC may not let you;
> * then make sure the AR9590 has calibration data for the 4.9GHz
> channel(s), or things won't work very well.
>
>
> -a
>
>
> On 1 August 2014 01:57, Pannirselvam Kanagaratnam <pannir@xsmail.com> wrote:
>> Hello,
>>
>> I would like to know how to enable 4.9 GHz on ath9k. The module I am
>> using is based on AR9590.
>>
>> Regards,
>>
>> Pannir
>> _______________________________________________
>> ath9k-devel mailing list
>> ath9k-devel at lists.ath9k.org
>> https://lists.ath9k.org/mailman/listinfo/ath9k-devel