[PATCH v2 0/2] Add VIN and ADV7180 device tree support for R8A7791/Henninger board

[PATCH v2 0/2] Add VIN and ADV7180 device tree support for R8A7791/Henninger board

[Sergei Shtylyov]

Hello.

   Here's the set of 2 patches against Simon Horman's 'renesas.git' repo,
'renesas-devel-v3.16-rc7-20140731v2' tag. Here we add the VIN and ADV7180 video
decoder device tree support on the R8A7791/Henninger board. The patchset
requires Ben Dooks' 'rcar_vin' and 'soc_camera' DT support patches already
merged to the 'media_tree.git' in order to work.

[1/2] ARM: shmobile: r8a7791: add VIN DT support
[2/2] ARM: shmobile: henninger: add VIN0/ADV7180 DT support

WBR, Sergei

[PATCH v2 0/2] Add VIN and ADV7180 device tree support for R8A7791/Henninger board

[Sergei Shtylyov]

Hello.

   Here's the set of 2 patches against Simon Horman's 'renesas.git' repo,
'renesas-devel-v3.16-rc7-20140731v2' tag. Here we add the VIN and ADV7180 video
decoder device tree support on the R8A7791/Henninger board. The patchset
requires Ben Dooks' 'rcar_vin' and 'soc_camera' DT support patches already
merged to the 'media_tree.git' in order to work.

[1/2] ARM: shmobile: r8a7791: add VIN DT support
[2/2] ARM: shmobile: henninger: add VIN0/ADV7180 DT support

WBR, Sergei

[PATCH v2 0/2] Add VIN and ADV7180 device tree support for R8A7791/Henninger board

[Sergei Shtylyov]

Hello.

   Here's the set of 2 patches against Simon Horman's 'renesas.git' repo,
'renesas-devel-v3.16-rc7-20140731v2' tag. Here we add the VIN and ADV7180 video
decoder device tree support on the R8A7791/Henninger board. The patchset
requires Ben Dooks' 'rcar_vin' and 'soc_camera' DT support patches already
merged to the 'media_tree.git' in order to work.

[1/2] ARM: shmobile: r8a7791: add VIN DT support
[2/2] ARM: shmobile: henninger: add VIN0/ADV7180 DT support

WBR, Sergei

[PATCH v2 1/2] ARM: shmobile: r8a7791: add VIN DT support

[Sergei Shtylyov]

Define the generic R8A7791 parts of the VIN[0-2] device nodes. Add aliases for
the VIN[0-2] device nodes. 

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>

---
Changes in version 2:
- fixed the "compatible" properties;
- refreshed the patch.

 arch/arm/boot/dts/r8a7791.dtsi |   27 +++++++++++++++++++++++++++
 1 file changed, 27 insertions(+)

Index: renesas/arch/arm/boot/dts/r8a7791.dtsi
=================================--- renesas.orig/arch/arm/boot/dts/r8a7791.dtsi
+++ renesas/arch/arm/boot/dts/r8a7791.dtsi
@@ -34,6 +34,9 @@
 		spi1 = &msiof0;
 		spi2 = &msiof1;
 		spi3 = &msiof2;
+		vin0 = &vin0;
+		vin1 = &vin1;
+		vin2 = &vin2;
 	};
 
 	cpus {
@@ -550,6 +553,30 @@
 		status = "disabled";
 	};
 
+	vin0: video@e6ef0000 {
+		compatible = "renesas,vin-r8a7791";
+		clocks = <&mstp8_clks R8A7791_CLK_VIN0>;
+		reg = <0 0xe6ef0000 0 0x1000>;
+		interrupts = <0 188 IRQ_TYPE_LEVEL_HIGH>;
+		status = "disabled";
+	};
+
+	vin1: video@e6ef1000 {
+		compatible = "renesas,vin-r8a7791";
+		clocks = <&mstp8_clks R8A7791_CLK_VIN1>;
+		reg = <0 0xe6ef1000 0 0x1000>;
+		interrupts = <0 189 IRQ_TYPE_LEVEL_HIGH>;
+		status = "disabled";
+	};
+
+	vin2: video@e6ef2000 {
+		compatible = "renesas,vin-r8a7791";
+		clocks = <&mstp8_clks R8A7791_CLK_VIN2>;
+		reg = <0 0xe6ef2000 0 0x1000>;
+		interrupts = <0 190 IRQ_TYPE_LEVEL_HIGH>;
+		status = "disabled";
+	};
+
 	clocks {
 		#address-cells = <2>;
 		#size-cells = <2>;

[PATCH v2 1/2] ARM: shmobile: r8a7791: add VIN DT support

[Sergei Shtylyov]

Define the generic R8A7791 parts of the VIN[0-2] device nodes. Add aliases for
the VIN[0-2] device nodes. 

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>

---
Changes in version 2:
- fixed the "compatible" properties;
- refreshed the patch.

 arch/arm/boot/dts/r8a7791.dtsi |   27 +++++++++++++++++++++++++++
 1 file changed, 27 insertions(+)

Index: renesas/arch/arm/boot/dts/r8a7791.dtsi
===================================================================
--- renesas.orig/arch/arm/boot/dts/r8a7791.dtsi
+++ renesas/arch/arm/boot/dts/r8a7791.dtsi
@@ -34,6 +34,9 @@
 		spi1 = &msiof0;
 		spi2 = &msiof1;
 		spi3 = &msiof2;
+		vin0 = &vin0;
+		vin1 = &vin1;
+		vin2 = &vin2;
 	};
 
 	cpus {
@@ -550,6 +553,30 @@
 		status = "disabled";
 	};
 
+	vin0: video@e6ef0000 {
+		compatible = "renesas,vin-r8a7791";
+		clocks = <&mstp8_clks R8A7791_CLK_VIN0>;
+		reg = <0 0xe6ef0000 0 0x1000>;
+		interrupts = <0 188 IRQ_TYPE_LEVEL_HIGH>;
+		status = "disabled";
+	};
+
+	vin1: video@e6ef1000 {
+		compatible = "renesas,vin-r8a7791";
+		clocks = <&mstp8_clks R8A7791_CLK_VIN1>;
+		reg = <0 0xe6ef1000 0 0x1000>;
+		interrupts = <0 189 IRQ_TYPE_LEVEL_HIGH>;
+		status = "disabled";
+	};
+
+	vin2: video@e6ef2000 {
+		compatible = "renesas,vin-r8a7791";
+		clocks = <&mstp8_clks R8A7791_CLK_VIN2>;
+		reg = <0 0xe6ef2000 0 0x1000>;
+		interrupts = <0 190 IRQ_TYPE_LEVEL_HIGH>;
+		status = "disabled";
+	};
+
 	clocks {
 		#address-cells = <2>;
 		#size-cells = <2>;

[PATCH v2 1/2] ARM: shmobile: r8a7791: add VIN DT support

[Sergei Shtylyov]

Define the generic R8A7791 parts of the VIN[0-2] device nodes. Add aliases for
the VIN[0-2] device nodes. 

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>

---
Changes in version 2:
- fixed the "compatible" properties;
- refreshed the patch.

 arch/arm/boot/dts/r8a7791.dtsi |   27 +++++++++++++++++++++++++++
 1 file changed, 27 insertions(+)

Index: renesas/arch/arm/boot/dts/r8a7791.dtsi
===================================================================
--- renesas.orig/arch/arm/boot/dts/r8a7791.dtsi
+++ renesas/arch/arm/boot/dts/r8a7791.dtsi
@@ -34,6 +34,9 @@
 		spi1 = &msiof0;
 		spi2 = &msiof1;
 		spi3 = &msiof2;
+		vin0 = &vin0;
+		vin1 = &vin1;
+		vin2 = &vin2;
 	};
 
 	cpus {
@@ -550,6 +553,30 @@
 		status = "disabled";
 	};
 
+	vin0: video at e6ef0000 {
+		compatible = "renesas,vin-r8a7791";
+		clocks = <&mstp8_clks R8A7791_CLK_VIN0>;
+		reg = <0 0xe6ef0000 0 0x1000>;
+		interrupts = <0 188 IRQ_TYPE_LEVEL_HIGH>;
+		status = "disabled";
+	};
+
+	vin1: video at e6ef1000 {
+		compatible = "renesas,vin-r8a7791";
+		clocks = <&mstp8_clks R8A7791_CLK_VIN1>;
+		reg = <0 0xe6ef1000 0 0x1000>;
+		interrupts = <0 189 IRQ_TYPE_LEVEL_HIGH>;
+		status = "disabled";
+	};
+
+	vin2: video at e6ef2000 {
+		compatible = "renesas,vin-r8a7791";
+		clocks = <&mstp8_clks R8A7791_CLK_VIN2>;
+		reg = <0 0xe6ef2000 0 0x1000>;
+		interrupts = <0 190 IRQ_TYPE_LEVEL_HIGH>;
+		status = "disabled";
+	};
+
 	clocks {
 		#address-cells = <2>;
 		#size-cells = <2>;

[PATCH v2 2/2] ARM: shmobile: henninger: add VIN0/ADV7180 DT support

[Sergei Shtylyov]

Define the Henninger board dependent part of the VIN0 device node. Add the
device node for Analog Devices ADV7180 video decoder to I2C2  bus. Add the
necessary subnodes to interconnect VIN0 and ADV7180 devices.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>

---
Changes in version 2:
- refreshed the patch.

 arch/arm/boot/dts/r8a7791-henninger.dts |   35 ++++++++++++++++++++++++++++++++
 1 file changed, 35 insertions(+)

Index: renesas/arch/arm/boot/dts/r8a7791-henninger.dts
=================================--- renesas.orig/arch/arm/boot/dts/r8a7791-henninger.dts
+++ renesas/arch/arm/boot/dts/r8a7791-henninger.dts
@@ -135,6 +135,11 @@
 		renesas,groups = "usb1";
 		renesas,function = "usb1";
 	};
+
+	vin0_pins: vin0 {
+		renesas,groups = "vin0_data8", "vin0_clk";
+		renesas,function = "vin0";
+	};
 };
 
 &scif0 {
@@ -191,6 +196,19 @@
 
 	status = "okay";
 	clock-frequency = <400000>;
+
+	composite-in@20 {
+		compatible = "adi,adv7180";
+		reg = <0x20>;
+		remote = <&vin0>;
+
+		port {
+			adv7180: endpoint {
+				bus-width = <8>;
+				remote-endpoint = <&vin0ep>;
+			};
+		};
+	};
 };
 
 &qspi {
@@ -260,3 +278,20 @@
 &pciec {
 	status = "okay";
 };
+
+/* composite video input */
+&vin0 {
+	status = "ok";
+	pinctrl-0 = <&vin0_pins>;
+	pinctrl-names = "default";
+
+	port {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		vin0ep: endpoint {
+			remote-endpoint = <&adv7180>;
+			bus-width = <8>;
+		};
+	};
+};

[PATCH v2 2/2] ARM: shmobile: henninger: add VIN0/ADV7180 DT support

[Sergei Shtylyov]

Define the Henninger board dependent part of the VIN0 device node. Add the
device node for Analog Devices ADV7180 video decoder to I2C2  bus. Add the
necessary subnodes to interconnect VIN0 and ADV7180 devices.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>

---
Changes in version 2:
- refreshed the patch.

 arch/arm/boot/dts/r8a7791-henninger.dts |   35 ++++++++++++++++++++++++++++++++
 1 file changed, 35 insertions(+)

Index: renesas/arch/arm/boot/dts/r8a7791-henninger.dts
===================================================================
--- renesas.orig/arch/arm/boot/dts/r8a7791-henninger.dts
+++ renesas/arch/arm/boot/dts/r8a7791-henninger.dts
@@ -135,6 +135,11 @@
 		renesas,groups = "usb1";
 		renesas,function = "usb1";
 	};
+
+	vin0_pins: vin0 {
+		renesas,groups = "vin0_data8", "vin0_clk";
+		renesas,function = "vin0";
+	};
 };
 
 &scif0 {
@@ -191,6 +196,19 @@
 
 	status = "okay";
 	clock-frequency = <400000>;
+
+	composite-in@20 {
+		compatible = "adi,adv7180";
+		reg = <0x20>;
+		remote = <&vin0>;
+
+		port {
+			adv7180: endpoint {
+				bus-width = <8>;
+				remote-endpoint = <&vin0ep>;
+			};
+		};
+	};
 };
 
 &qspi {
@@ -260,3 +278,20 @@
 &pciec {
 	status = "okay";
 };
+
+/* composite video input */
+&vin0 {
+	status = "ok";
+	pinctrl-0 = <&vin0_pins>;
+	pinctrl-names = "default";
+
+	port {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		vin0ep: endpoint {
+			remote-endpoint = <&adv7180>;
+			bus-width = <8>;
+		};
+	};
+};

[PATCH v2 2/2] ARM: shmobile: henninger: add VIN0/ADV7180 DT support

[Sergei Shtylyov]

Define the Henninger board dependent part of the VIN0 device node. Add the
device node for Analog Devices ADV7180 video decoder to I2C2  bus. Add the
necessary subnodes to interconnect VIN0 and ADV7180 devices.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>

---
Changes in version 2:
- refreshed the patch.

 arch/arm/boot/dts/r8a7791-henninger.dts |   35 ++++++++++++++++++++++++++++++++
 1 file changed, 35 insertions(+)

Index: renesas/arch/arm/boot/dts/r8a7791-henninger.dts
===================================================================
--- renesas.orig/arch/arm/boot/dts/r8a7791-henninger.dts
+++ renesas/arch/arm/boot/dts/r8a7791-henninger.dts
@@ -135,6 +135,11 @@
 		renesas,groups = "usb1";
 		renesas,function = "usb1";
 	};
+
+	vin0_pins: vin0 {
+		renesas,groups = "vin0_data8", "vin0_clk";
+		renesas,function = "vin0";
+	};
 };
 
 &scif0 {
@@ -191,6 +196,19 @@
 
 	status = "okay";
 	clock-frequency = <400000>;
+
+	composite-in at 20 {
+		compatible = "adi,adv7180";
+		reg = <0x20>;
+		remote = <&vin0>;
+
+		port {
+			adv7180: endpoint {
+				bus-width = <8>;
+				remote-endpoint = <&vin0ep>;
+			};
+		};
+	};
 };
 
 &qspi {
@@ -260,3 +278,20 @@
 &pciec {
 	status = "okay";
 };
+
+/* composite video input */
+&vin0 {
+	status = "ok";
+	pinctrl-0 = <&vin0_pins>;
+	pinctrl-names = "default";
+
+	port {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		vin0ep: endpoint {
+			remote-endpoint = <&adv7180>;
+			bus-width = <8>;
+		};
+	};
+};

Re: [PATCH v2 0/2] Add VIN and ADV7180 device tree support for R8A7791/Henninger board

[Simon Horman]

On Sat, Aug 02, 2014 at 04:02:13AM +0400, Sergei Shtylyov wrote:
> Hello.
> 
>    Here's the set of 2 patches against Simon Horman's 'renesas.git' repo,
> 'renesas-devel-v3.16-rc7-20140731v2' tag. Here we add the VIN and ADV7180 video
> decoder device tree support on the R8A7791/Henninger board. The patchset
> requires Ben Dooks' 'rcar_vin' and 'soc_camera' DT support patches already
> merged to the 'media_tree.git' in order to work.
> 
> [1/2] ARM: shmobile: r8a7791: add VIN DT support
> [2/2] ARM: shmobile: henninger: add VIN0/ADV7180 DT support

Thanks, I have queued these up for v3.18.

Re: [PATCH v2 0/2] Add VIN and ADV7180 device tree support for R8A7791/Henninger board

[Simon Horman]

On Sat, Aug 02, 2014 at 04:02:13AM +0400, Sergei Shtylyov wrote:
> Hello.
> 
>    Here's the set of 2 patches against Simon Horman's 'renesas.git' repo,
> 'renesas-devel-v3.16-rc7-20140731v2' tag. Here we add the VIN and ADV7180 video
> decoder device tree support on the R8A7791/Henninger board. The patchset
> requires Ben Dooks' 'rcar_vin' and 'soc_camera' DT support patches already
> merged to the 'media_tree.git' in order to work.
> 
> [1/2] ARM: shmobile: r8a7791: add VIN DT support
> [2/2] ARM: shmobile: henninger: add VIN0/ADV7180 DT support

Thanks, I have queued these up for v3.18.

[PATCH v2 0/2] Add VIN and ADV7180 device tree support for R8A7791/Henninger board

[Simon Horman]

On Sat, Aug 02, 2014 at 04:02:13AM +0400, Sergei Shtylyov wrote:
> Hello.
> 
>    Here's the set of 2 patches against Simon Horman's 'renesas.git' repo,
> 'renesas-devel-v3.16-rc7-20140731v2' tag. Here we add the VIN and ADV7180 video
> decoder device tree support on the R8A7791/Henninger board. The patchset
> requires Ben Dooks' 'rcar_vin' and 'soc_camera' DT support patches already
> merged to the 'media_tree.git' in order to work.
> 
> [1/2] ARM: shmobile: r8a7791: add VIN DT support
> [2/2] ARM: shmobile: henninger: add VIN0/ADV7180 DT support

Thanks, I have queued these up for v3.18.

[PATCH] ARM: shmobile: koelsch: add VIN1/ADV7180 DT support

[sergei.shtylyov]

Define the Koelsch board dependent part of the VIN1 device node. Add the device
node for Analog  Devices ADV7180  video decoder to  I2C2 bus. Add the necessary
subnodes to interconnect VIN1 and ADV7180 devices.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>

---
This patch is against the 'renesas-devel-v3.16-20140804' tag of Simon Horman's
'renesas.git' repo. It requires the 'soc_camera' and 'rcar_vin' device tree
support patches (already merged to the 'media_tree.git' repo) in order to work.

 arch/arm/boot/dts/r8a7791-koelsch.dts |   35 ++++++++++++++++++++++++++++++++++
 1 file changed, 35 insertions(+)

Index: renesas/arch/arm/boot/dts/r8a7791-koelsch.dts
=================================--- renesas.orig/arch/arm/boot/dts/r8a7791-koelsch.dts
+++ renesas/arch/arm/boot/dts/r8a7791-koelsch.dts
@@ -289,6 +289,11 @@
 		renesas,groups = "usb1";
 		renesas,function = "usb1";
 	};
+
+	vin1_pins: vin1 {
+		renesas,groups = "vin1_data8", "vin1_clk";
+		renesas,function = "vin1";
+	};
 };
 
 &ether {
@@ -416,6 +421,19 @@
 	status = "okay";
 	clock-frequency = <400000>;
 
+	composite-in@20 {
+		compatible = "adi,adv7180";
+		reg = <0x20>;
+		remote = <&vin1>;
+
+		port {
+			adv7180: endpoint {
+				bus-width = <8>;
+				remote-endpoint = <&vin1ep>;
+			};
+		};
+	};
+
 	eeprom@50 {
 		compatible = "renesas,24c02";
 		reg = <0x50>;
@@ -463,3 +481,20 @@
 &cpu0 {
 	cpu0-supply = <&vdd_dvfs>;
 };
+
+/* composite video input */
+&vin1 {
+	status = "ok";
+	pinctrl-0 = <&vin1_pins>;
+	pinctrl-names = "default";
+
+	port {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		vin1ep: endpoint {
+			remote-endpoint = <&adv7180>;
+			bus-width = <8>;
+		};
+	};
+};

[PATCH] ARM: shmobile: koelsch: add VIN1/ADV7180 DT support

[sergei.shtylyov-M4DtvfQ/ZS1MRgGoP+s0PdBPR1lH4CV8]

Define the Koelsch board dependent part of the VIN1 device node. Add the device
node for Analog  Devices ADV7180  video decoder to  I2C2 bus. Add the necessary
subnodes to interconnect VIN1 and ADV7180 devices.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov-M4DtvfQ/ZS1MRgGoP+s0PdBPR1lH4CV8@public.gmane.org>

---
This patch is against the 'renesas-devel-v3.16-20140804' tag of Simon Horman's
'renesas.git' repo. It requires the 'soc_camera' and 'rcar_vin' device tree
support patches (already merged to the 'media_tree.git' repo) in order to work.

 arch/arm/boot/dts/r8a7791-koelsch.dts |   35 ++++++++++++++++++++++++++++++++++
 1 file changed, 35 insertions(+)

Index: renesas/arch/arm/boot/dts/r8a7791-koelsch.dts
===================================================================
--- renesas.orig/arch/arm/boot/dts/r8a7791-koelsch.dts
+++ renesas/arch/arm/boot/dts/r8a7791-koelsch.dts
@@ -289,6 +289,11 @@
 		renesas,groups = "usb1";
 		renesas,function = "usb1";
 	};
+
+	vin1_pins: vin1 {
+		renesas,groups = "vin1_data8", "vin1_clk";
+		renesas,function = "vin1";
+	};
 };
 
 &ether {
@@ -416,6 +421,19 @@
 	status = "okay";
 	clock-frequency = <400000>;
 
+	composite-in@20 {
+		compatible = "adi,adv7180";
+		reg = <0x20>;
+		remote = <&vin1>;
+
+		port {
+			adv7180: endpoint {
+				bus-width = <8>;
+				remote-endpoint = <&vin1ep>;
+			};
+		};
+	};
+
 	eeprom@50 {
 		compatible = "renesas,24c02";
 		reg = <0x50>;
@@ -463,3 +481,20 @@
 &cpu0 {
 	cpu0-supply = <&vdd_dvfs>;
 };
+
+/* composite video input */
+&vin1 {
+	status = "ok";
+	pinctrl-0 = <&vin1_pins>;
+	pinctrl-names = "default";
+
+	port {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		vin1ep: endpoint {
+			remote-endpoint = <&adv7180>;
+			bus-width = <8>;
+		};
+	};
+};
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH] ARM: shmobile: koelsch: add VIN1/ADV7180 DT support

[sergei.shtylyov at cogentembedded.com]

Define the Koelsch board dependent part of the VIN1 device node. Add the device
node for Analog  Devices ADV7180  video decoder to  I2C2 bus. Add the necessary
subnodes to interconnect VIN1 and ADV7180 devices.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>

---
This patch is against the 'renesas-devel-v3.16-20140804' tag of Simon Horman's
'renesas.git' repo. It requires the 'soc_camera' and 'rcar_vin' device tree
support patches (already merged to the 'media_tree.git' repo) in order to work.

 arch/arm/boot/dts/r8a7791-koelsch.dts |   35 ++++++++++++++++++++++++++++++++++
 1 file changed, 35 insertions(+)

Index: renesas/arch/arm/boot/dts/r8a7791-koelsch.dts
===================================================================
--- renesas.orig/arch/arm/boot/dts/r8a7791-koelsch.dts
+++ renesas/arch/arm/boot/dts/r8a7791-koelsch.dts
@@ -289,6 +289,11 @@
 		renesas,groups = "usb1";
 		renesas,function = "usb1";
 	};
+
+	vin1_pins: vin1 {
+		renesas,groups = "vin1_data8", "vin1_clk";
+		renesas,function = "vin1";
+	};
 };
 
 &ether {
@@ -416,6 +421,19 @@
 	status = "okay";
 	clock-frequency = <400000>;
 
+	composite-in at 20 {
+		compatible = "adi,adv7180";
+		reg = <0x20>;
+		remote = <&vin1>;
+
+		port {
+			adv7180: endpoint {
+				bus-width = <8>;
+				remote-endpoint = <&vin1ep>;
+			};
+		};
+	};
+
 	eeprom at 50 {
 		compatible = "renesas,24c02";
 		reg = <0x50>;
@@ -463,3 +481,20 @@
 &cpu0 {
 	cpu0-supply = <&vdd_dvfs>;
 };
+
+/* composite video input */
+&vin1 {
+	status = "ok";
+	pinctrl-0 = <&vin1_pins>;
+	pinctrl-names = "default";
+
+	port {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		vin1ep: endpoint {
+			remote-endpoint = <&adv7180>;
+			bus-width = <8>;
+		};
+	};
+};

Re: [PATCH] ARM: shmobile: koelsch: add VIN1/ADV7180 DT support

[Simon Horman]

On Wed, Aug 06, 2014 at 10:38:22PM +0400, sergei.shtylyov@cogentembedded.com wrote:
> Define the Koelsch board dependent part of the VIN1 device node. Add the device
> node for Analog  Devices ADV7180  video decoder to  I2C2 bus. Add the necessary
> subnodes to interconnect VIN1 and ADV7180 devices.
> 
> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
> 
> ---
> This patch is against the 'renesas-devel-v3.16-20140804' tag of Simon Horman's
> 'renesas.git' repo. It requires the 'soc_camera' and 'rcar_vin' device tree
> support patches (already merged to the 'media_tree.git' repo) in order to work.
> 
>  arch/arm/boot/dts/r8a7791-koelsch.dts |   35 ++++++++++++++++++++++++++++++++++
>  1 file changed, 35 insertions(+)

Thanks, I have queued this up for v3.18.

Re: [PATCH] ARM: shmobile: koelsch: add VIN1/ADV7180 DT support

[Simon Horman]

On Wed, Aug 06, 2014 at 10:38:22PM +0400, sergei.shtylyov@cogentembedded.com wrote:
> Define the Koelsch board dependent part of the VIN1 device node. Add the device
> node for Analog  Devices ADV7180  video decoder to  I2C2 bus. Add the necessary
> subnodes to interconnect VIN1 and ADV7180 devices.
> 
> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
> 
> ---
> This patch is against the 'renesas-devel-v3.16-20140804' tag of Simon Horman's
> 'renesas.git' repo. It requires the 'soc_camera' and 'rcar_vin' device tree
> support patches (already merged to the 'media_tree.git' repo) in order to work.
> 
>  arch/arm/boot/dts/r8a7791-koelsch.dts |   35 ++++++++++++++++++++++++++++++++++
>  1 file changed, 35 insertions(+)

Thanks, I have queued this up for v3.18.

[PATCH] ARM: shmobile: koelsch: add VIN1/ADV7180 DT support

[Simon Horman]

On Wed, Aug 06, 2014 at 10:38:22PM +0400, sergei.shtylyov at cogentembedded.com wrote:
> Define the Koelsch board dependent part of the VIN1 device node. Add the device
> node for Analog  Devices ADV7180  video decoder to  I2C2 bus. Add the necessary
> subnodes to interconnect VIN1 and ADV7180 devices.
> 
> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
> 
> ---
> This patch is against the 'renesas-devel-v3.16-20140804' tag of Simon Horman's
> 'renesas.git' repo. It requires the 'soc_camera' and 'rcar_vin' device tree
> support patches (already merged to the 'media_tree.git' repo) in order to work.
> 
>  arch/arm/boot/dts/r8a7791-koelsch.dts |   35 ++++++++++++++++++++++++++++++++++
>  1 file changed, 35 insertions(+)

Thanks, I have queued this up for v3.18.

Re: [PATCH] ARM: shmobile: koelsch: add VIN1/ADV7180 DT support

[Magnus Damm]

Hi Sergei,

Thanks for your patch.

On Thu, Aug 7, 2014 at 3:38 AM,  <sergei.shtylyov@cogentembedded.com> wrote:
> Define the Koelsch board dependent part of the VIN1 device node. Add the device
> node for Analog  Devices ADV7180  video decoder to  I2C2 bus. Add the necessary
> subnodes to interconnect VIN1 and ADV7180 devices.
>
> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
>
> ---
> This patch is against the 'renesas-devel-v3.16-20140804' tag of Simon Horman's
> 'renesas.git' repo. It requires the 'soc_camera' and 'rcar_vin' device tree
> support patches (already merged to the 'media_tree.git' repo) in order to work.
>
>  arch/arm/boot/dts/r8a7791-koelsch.dts |   35 ++++++++++++++++++++++++++++++++++
>  1 file changed, 35 insertions(+)
>
> Index: renesas/arch/arm/boot/dts/r8a7791-koelsch.dts
> =================================> --- renesas.orig/arch/arm/boot/dts/r8a7791-koelsch.dts
> +++ renesas/arch/arm/boot/dts/r8a7791-koelsch.dts
> @@ -289,6 +289,11 @@
>                 renesas,groups = "usb1";
>                 renesas,function = "usb1";
>         };
> +
> +       vin1_pins: vin1 {
> +               renesas,groups = "vin1_data8", "vin1_clk";
> +               renesas,function = "vin1";
> +       };
>  };

Quick question: Does this pin description match to the board layout? I
suspect that clock and data by themselves are not enough.

I'm not sure about Koelsch, but  in case of older SoCs using the CEU
there were signals used like horizontal and vertical sync and
sometimes even something that was used to determine interlace.

Thanks,

/ magnus

Re: [PATCH] ARM: shmobile: koelsch: add VIN1/ADV7180 DT support

[Magnus Damm]

Hi Sergei,

Thanks for your patch.

On Thu, Aug 7, 2014 at 3:38 AM,  <sergei.shtylyov@cogentembedded.com> wrote:
> Define the Koelsch board dependent part of the VIN1 device node. Add the device
> node for Analog  Devices ADV7180  video decoder to  I2C2 bus. Add the necessary
> subnodes to interconnect VIN1 and ADV7180 devices.
>
> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
>
> ---
> This patch is against the 'renesas-devel-v3.16-20140804' tag of Simon Horman's
> 'renesas.git' repo. It requires the 'soc_camera' and 'rcar_vin' device tree
> support patches (already merged to the 'media_tree.git' repo) in order to work.
>
>  arch/arm/boot/dts/r8a7791-koelsch.dts |   35 ++++++++++++++++++++++++++++++++++
>  1 file changed, 35 insertions(+)
>
> Index: renesas/arch/arm/boot/dts/r8a7791-koelsch.dts
> ===================================================================
> --- renesas.orig/arch/arm/boot/dts/r8a7791-koelsch.dts
> +++ renesas/arch/arm/boot/dts/r8a7791-koelsch.dts
> @@ -289,6 +289,11 @@
>                 renesas,groups = "usb1";
>                 renesas,function = "usb1";
>         };
> +
> +       vin1_pins: vin1 {
> +               renesas,groups = "vin1_data8", "vin1_clk";
> +               renesas,function = "vin1";
> +       };
>  };

Quick question: Does this pin description match to the board layout? I
suspect that clock and data by themselves are not enough.

I'm not sure about Koelsch, but  in case of older SoCs using the CEU
there were signals used like horizontal and vertical sync and
sometimes even something that was used to determine interlace.

Thanks,

/ magnus

[PATCH] ARM: shmobile: koelsch: add VIN1/ADV7180 DT support

[Magnus Damm]

Hi Sergei,

Thanks for your patch.

On Thu, Aug 7, 2014 at 3:38 AM,  <sergei.shtylyov@cogentembedded.com> wrote:
> Define the Koelsch board dependent part of the VIN1 device node. Add the device
> node for Analog  Devices ADV7180  video decoder to  I2C2 bus. Add the necessary
> subnodes to interconnect VIN1 and ADV7180 devices.
>
> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
>
> ---
> This patch is against the 'renesas-devel-v3.16-20140804' tag of Simon Horman's
> 'renesas.git' repo. It requires the 'soc_camera' and 'rcar_vin' device tree
> support patches (already merged to the 'media_tree.git' repo) in order to work.
>
>  arch/arm/boot/dts/r8a7791-koelsch.dts |   35 ++++++++++++++++++++++++++++++++++
>  1 file changed, 35 insertions(+)
>
> Index: renesas/arch/arm/boot/dts/r8a7791-koelsch.dts
> ===================================================================
> --- renesas.orig/arch/arm/boot/dts/r8a7791-koelsch.dts
> +++ renesas/arch/arm/boot/dts/r8a7791-koelsch.dts
> @@ -289,6 +289,11 @@
>                 renesas,groups = "usb1";
>                 renesas,function = "usb1";
>         };
> +
> +       vin1_pins: vin1 {
> +               renesas,groups = "vin1_data8", "vin1_clk";
> +               renesas,function = "vin1";
> +       };
>  };

Quick question: Does this pin description match to the board layout? I
suspect that clock and data by themselves are not enough.

I'm not sure about Koelsch, but  in case of older SoCs using the CEU
there were signals used like horizontal and vertical sync and
sometimes even something that was used to determine interlace.

Thanks,

/ magnus

Re: [PATCH] ARM: shmobile: koelsch: add VIN1/ADV7180 DT support

[Sergei Shtylyov]

Hello.

On 08/07/2014 08:01 AM, Magnus Damm wrote:

>> Define the Koelsch board dependent part of the VIN1 device node. Add the device
>> node for Analog  Devices ADV7180  video decoder to  I2C2 bus. Add the necessary
>> subnodes to interconnect VIN1 and ADV7180 devices.

>> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>

>> ---
>> This patch is against the 'renesas-devel-v3.16-20140804' tag of Simon Horman's
>> 'renesas.git' repo. It requires the 'soc_camera' and 'rcar_vin' device tree
>> support patches (already merged to the 'media_tree.git' repo) in order to work.

>>   arch/arm/boot/dts/r8a7791-koelsch.dts |   35 ++++++++++++++++++++++++++++++++++
>>   1 file changed, 35 insertions(+)

>> Index: renesas/arch/arm/boot/dts/r8a7791-koelsch.dts
>> =================================>> --- renesas.orig/arch/arm/boot/dts/r8a7791-koelsch.dts
>> +++ renesas/arch/arm/boot/dts/r8a7791-koelsch.dts
>> @@ -289,6 +289,11 @@
>>                  renesas,groups = "usb1";
>>                  renesas,function = "usb1";
>>          };
>> +
>> +       vin1_pins: vin1 {
>> +               renesas,groups = "vin1_data8", "vin1_clk";
>> +               renesas,function = "vin1";
>> +       };
>>   };

> Quick question: Does this pin description match to the board layout? I

    Yes, it does.

> suspect that clock and data by themselves are not enough.

    They are enough as BT.656 interconnect is used between VIN1 and ADV7180.

> I'm not sure about Koelsch, but  in case of older SoCs using the CEU
> there were signals used like horizontal and vertical sync and
> sometimes even something that was used to determine interlace.

    The HS and VS/FIELD pins of ADV7180 are left unconnected.  There's also 
ADV7612 connected to VIN0 on this board, there the HSYNC and VSYNC/FIELD pins 
are connected; however, ADV7612 is not supported yet.

> Thanks,

> / magnus

WBR, Sergei

Re: [PATCH] ARM: shmobile: koelsch: add VIN1/ADV7180 DT support

[Sergei Shtylyov]

Hello.

On 08/07/2014 08:01 AM, Magnus Damm wrote:

>> Define the Koelsch board dependent part of the VIN1 device node. Add the device
>> node for Analog  Devices ADV7180  video decoder to  I2C2 bus. Add the necessary
>> subnodes to interconnect VIN1 and ADV7180 devices.

>> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>

>> ---
>> This patch is against the 'renesas-devel-v3.16-20140804' tag of Simon Horman's
>> 'renesas.git' repo. It requires the 'soc_camera' and 'rcar_vin' device tree
>> support patches (already merged to the 'media_tree.git' repo) in order to work.

>>   arch/arm/boot/dts/r8a7791-koelsch.dts |   35 ++++++++++++++++++++++++++++++++++
>>   1 file changed, 35 insertions(+)

>> Index: renesas/arch/arm/boot/dts/r8a7791-koelsch.dts
>> ===================================================================
>> --- renesas.orig/arch/arm/boot/dts/r8a7791-koelsch.dts
>> +++ renesas/arch/arm/boot/dts/r8a7791-koelsch.dts
>> @@ -289,6 +289,11 @@
>>                  renesas,groups = "usb1";
>>                  renesas,function = "usb1";
>>          };
>> +
>> +       vin1_pins: vin1 {
>> +               renesas,groups = "vin1_data8", "vin1_clk";
>> +               renesas,function = "vin1";
>> +       };
>>   };

> Quick question: Does this pin description match to the board layout? I

    Yes, it does.

> suspect that clock and data by themselves are not enough.

    They are enough as BT.656 interconnect is used between VIN1 and ADV7180.

> I'm not sure about Koelsch, but  in case of older SoCs using the CEU
> there were signals used like horizontal and vertical sync and
> sometimes even something that was used to determine interlace.

    The HS and VS/FIELD pins of ADV7180 are left unconnected.  There's also 
ADV7612 connected to VIN0 on this board, there the HSYNC and VSYNC/FIELD pins 
are connected; however, ADV7612 is not supported yet.

> Thanks,

> / magnus

WBR, Sergei

[PATCH] ARM: shmobile: koelsch: add VIN1/ADV7180 DT support

[Sergei Shtylyov]

Hello.

On 08/07/2014 08:01 AM, Magnus Damm wrote:

>> Define the Koelsch board dependent part of the VIN1 device node. Add the device
>> node for Analog  Devices ADV7180  video decoder to  I2C2 bus. Add the necessary
>> subnodes to interconnect VIN1 and ADV7180 devices.

>> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>

>> ---
>> This patch is against the 'renesas-devel-v3.16-20140804' tag of Simon Horman's
>> 'renesas.git' repo. It requires the 'soc_camera' and 'rcar_vin' device tree
>> support patches (already merged to the 'media_tree.git' repo) in order to work.

>>   arch/arm/boot/dts/r8a7791-koelsch.dts |   35 ++++++++++++++++++++++++++++++++++
>>   1 file changed, 35 insertions(+)

>> Index: renesas/arch/arm/boot/dts/r8a7791-koelsch.dts
>> ===================================================================
>> --- renesas.orig/arch/arm/boot/dts/r8a7791-koelsch.dts
>> +++ renesas/arch/arm/boot/dts/r8a7791-koelsch.dts
>> @@ -289,6 +289,11 @@
>>                  renesas,groups = "usb1";
>>                  renesas,function = "usb1";
>>          };
>> +
>> +       vin1_pins: vin1 {
>> +               renesas,groups = "vin1_data8", "vin1_clk";
>> +               renesas,function = "vin1";
>> +       };
>>   };

> Quick question: Does this pin description match to the board layout? I

    Yes, it does.

> suspect that clock and data by themselves are not enough.

    They are enough as BT.656 interconnect is used between VIN1 and ADV7180.

> I'm not sure about Koelsch, but  in case of older SoCs using the CEU
> there were signals used like horizontal and vertical sync and
> sometimes even something that was used to determine interlace.

    The HS and VS/FIELD pins of ADV7180 are left unconnected.  There's also 
ADV7612 connected to VIN0 on this board, there the HSYNC and VSYNC/FIELD pins 
are connected; however, ADV7612 is not supported yet.

> Thanks,

> / magnus

WBR, Sergei