All of lore.kernel.org
 help / color / mirror / Atom feed
From: Nick Dyer <nick.dyer-8YpZQSjhsQH10XsdtD+oqA@public.gmane.org>
To: Javier Martinez Canillas
	<javier.martinez-ZGY8ohtN/8pPYcu2f3hruQ@public.gmane.org>,
	Dmitry Torokhov
	<dmitry.torokhov-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Cc: Stephen Warren <swarren-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>,
	Yufeng Shen <miletus-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org>,
	Benson Leung <bleung-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org>,
	Doug Anderson <dianders-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org>,
	Olof Johansson <olof-nZhT3qVonbNeoWH0uzbU5w@public.gmane.org>,
	Tomasz Figa <tomasz.figa-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
	linux-input-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	linux-samsung-soc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: Re: [PATCH v2 1/1] Input: atmel_mxt_ts - Get IRQ edge/level flags on DT booting
Date: Fri, 08 Aug 2014 15:07:33 +0100	[thread overview]
Message-ID: <53E4D9A5.908@itdev.co.uk> (raw)
In-Reply-To: <1407397492-17475-1-git-send-email-javier.martinez-ZGY8ohtN/8pPYcu2f3hruQ@public.gmane.org>

On 07/08/14 08:44, Javier Martinez Canillas wrote:
> The Atmel maXTouch driver assumed that the IRQ type flags will
> always be passed using platform data but this is not true when
> booting using Device Trees. In these setups the interrupt type
> was ignored by the driver when requesting an IRQ.
> 
> This means that it will fail if a machine specified other type
> than IRQ_TYPE_NONE. The right approach is to get the IRQ flags
> that was parsed by OF from the "interrupt" Device Tree propery.
> 
> Signed-off-by: Javier Martinez Canillas <javier.martinez-ZGY8ohtN/8pPYcu2f3hruQ@public.gmane.org>

I'm happy for this to go in if Dmitry will accept it. It does seem to be a
quirk of some platforms that it is necessary, but it's only one line.

Thanks for spending so much time debugging this.

Signed-off-by: Nick Dyer <nick.dyer-8YpZQSjhsQH10XsdtD+oqA@public.gmane.org>

> ---
> 
> This patch was first sent as a part of a two part series along
> with [PATCH 2/2] Input: atmel_mxt_ts - Add keycodes array example.
> 
> But there are no dependencies between these two patches so there
> is no need to resend that one with no changes for v2.
> 
> Changes since v1:
>  - Assign flags to pdata->irqflags in mxt_parse_dt() instead of probe().
>    Suggested by Tomasz Figa.
> 
>  drivers/input/touchscreen/atmel_mxt_ts.c | 3 +++
>  1 file changed, 3 insertions(+)
> 
> diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c
> index 03b8571..5c8cbd3 100644
> --- a/drivers/input/touchscreen/atmel_mxt_ts.c
> +++ b/drivers/input/touchscreen/atmel_mxt_ts.c
> @@ -22,6 +22,7 @@
>  #include <linux/i2c.h>
>  #include <linux/i2c/atmel_mxt_ts.h>
>  #include <linux/input/mt.h>
> +#include <linux/irq.h>
>  #include <linux/interrupt.h>
>  #include <linux/of.h>
>  #include <linux/slab.h>
> @@ -2093,6 +2094,8 @@ static struct mxt_platform_data *mxt_parse_dt(struct i2c_client *client)
>  	if (!pdata)
>  		return ERR_PTR(-ENOMEM);
>  
> +	pdata->irqflags = irq_get_trigger_type(client->irq);
> +
>  	if (of_find_property(client->dev.of_node, "linux,gpio-keymap",
>  			     &proplen)) {
>  		pdata->t19_num_keys = proplen / sizeof(u32);
> 
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

WARNING: multiple messages have this Message-ID (diff)
From: Nick Dyer <nick.dyer@itdev.co.uk>
To: Javier Martinez Canillas <javier.martinez@collabora.co.uk>,
	Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Stephen Warren <swarren@nvidia.com>,
	Yufeng Shen <miletus@chromium.org>,
	Benson Leung <bleung@chromium.org>,
	Doug Anderson <dianders@chromium.org>,
	Olof Johansson <olof@lixom.net>,
	Tomasz Figa <tomasz.figa@gmail.com>,
	linux-input@vger.kernel.org, devicetree@vger.kernel.org,
	linux-samsung-soc@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v2 1/1] Input: atmel_mxt_ts - Get IRQ edge/level flags on DT booting
Date: Fri, 08 Aug 2014 15:07:33 +0100	[thread overview]
Message-ID: <53E4D9A5.908@itdev.co.uk> (raw)
In-Reply-To: <1407397492-17475-1-git-send-email-javier.martinez@collabora.co.uk>

On 07/08/14 08:44, Javier Martinez Canillas wrote:
> The Atmel maXTouch driver assumed that the IRQ type flags will
> always be passed using platform data but this is not true when
> booting using Device Trees. In these setups the interrupt type
> was ignored by the driver when requesting an IRQ.
> 
> This means that it will fail if a machine specified other type
> than IRQ_TYPE_NONE. The right approach is to get the IRQ flags
> that was parsed by OF from the "interrupt" Device Tree propery.
> 
> Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>

I'm happy for this to go in if Dmitry will accept it. It does seem to be a
quirk of some platforms that it is necessary, but it's only one line.

Thanks for spending so much time debugging this.

Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk>

> ---
> 
> This patch was first sent as a part of a two part series along
> with [PATCH 2/2] Input: atmel_mxt_ts - Add keycodes array example.
> 
> But there are no dependencies between these two patches so there
> is no need to resend that one with no changes for v2.
> 
> Changes since v1:
>  - Assign flags to pdata->irqflags in mxt_parse_dt() instead of probe().
>    Suggested by Tomasz Figa.
> 
>  drivers/input/touchscreen/atmel_mxt_ts.c | 3 +++
>  1 file changed, 3 insertions(+)
> 
> diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c
> index 03b8571..5c8cbd3 100644
> --- a/drivers/input/touchscreen/atmel_mxt_ts.c
> +++ b/drivers/input/touchscreen/atmel_mxt_ts.c
> @@ -22,6 +22,7 @@
>  #include <linux/i2c.h>
>  #include <linux/i2c/atmel_mxt_ts.h>
>  #include <linux/input/mt.h>
> +#include <linux/irq.h>
>  #include <linux/interrupt.h>
>  #include <linux/of.h>
>  #include <linux/slab.h>
> @@ -2093,6 +2094,8 @@ static struct mxt_platform_data *mxt_parse_dt(struct i2c_client *client)
>  	if (!pdata)
>  		return ERR_PTR(-ENOMEM);
>  
> +	pdata->irqflags = irq_get_trigger_type(client->irq);
> +
>  	if (of_find_property(client->dev.of_node, "linux,gpio-keymap",
>  			     &proplen)) {
>  		pdata->t19_num_keys = proplen / sizeof(u32);
> 

  parent reply	other threads:[~2014-08-08 14:07 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-08-07  7:44 [PATCH v2 1/1] Input: atmel_mxt_ts - Get IRQ edge/level flags on DT booting Javier Martinez Canillas
     [not found] ` <1407397492-17475-1-git-send-email-javier.martinez-ZGY8ohtN/8pPYcu2f3hruQ@public.gmane.org>
2014-08-08 14:07   ` Nick Dyer [this message]
2014-08-08 14:07     ` Nick Dyer
2014-08-08 16:21     ` Dmitry Torokhov
2014-08-08 16:38       ` Javier Martinez Canillas
2014-08-08 18:29         ` Javier Martinez Canillas
     [not found]           ` <53E5170C.10302-ZGY8ohtN/8pPYcu2f3hruQ@public.gmane.org>
2014-08-08 18:41             ` Tomasz Figa
2014-08-08 18:41               ` Tomasz Figa
2014-08-08 20:54           ` Doug Anderson
2014-08-08 22:26             ` Javier Martinez Canillas
2014-08-08 23:58               ` Doug Anderson
2014-08-11  8:32               ` Linus Walleij
2014-08-11  9:09                 ` Javier Martinez Canillas

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=53E4D9A5.908@itdev.co.uk \
    --to=nick.dyer-8ypzqsjhsqh10xsdtd+oqa@public.gmane.org \
    --cc=bleung-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org \
    --cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=dianders-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org \
    --cc=dmitry.torokhov-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
    --cc=javier.martinez-ZGY8ohtN/8pPYcu2f3hruQ@public.gmane.org \
    --cc=linux-input-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=linux-samsung-soc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=miletus-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org \
    --cc=olof-nZhT3qVonbNeoWH0uzbU5w@public.gmane.org \
    --cc=swarren-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org \
    --cc=tomasz.figa-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.