From: Matthias Brugger <matthias.bgg@gmail.com>
To: Carlo Caione <carlo@caione.org>,
linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
linux-serial@vger.kernel.org, linux@arm.linux.org.uk,
robh+dt@kernel.org, mark.rutland@arm.com,
ijc+devicetree@hellion.org.uk, daniel.lezcano@linaro.org,
tglx@linutronix.de, gregkh@linuxfoundation.org, jslaby@suse.cz,
grant.likely@linaro.org, b.galvani@gmail.com
Subject: Re: [PATCH 7/7] ARM: meson: update documentation (uart, timer and vendors)
Date: Mon, 18 Aug 2014 12:36:47 +0200 [thread overview]
Message-ID: <53F1D73F.8010204@gmail.com> (raw)
In-Reply-To: <1408272594-10814-8-git-send-email-carlo@caione.org>
On 17/08/14 12:49, Carlo Caione wrote:
> New UART and timer bindings are documented. A new vendor is added to the
> vendors list.
>
> Signed-off-by: Carlo Caione <carlo@caione.org>
> ---
> .../devicetree/bindings/serial/amlogic,meson-uart.txt | 17 +++++++++++++++++
> .../devicetree/bindings/timer/amlogic,meson6-timer.txt | 16 ++++++++++++++++
> Documentation/devicetree/bindings/vendor-prefixes.txt | 1 +
> 3 files changed, 34 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/serial/amlogic,meson-uart.txt
> create mode 100644 Documentation/devicetree/bindings/timer/amlogic,meson6-timer.txt
This should be three patches for the different files. It might happen,
that for example your timer driver get merged through a different tree
then arm-soc. For the merge, the driver and the documentation should go
togehter.
>
> diff --git a/Documentation/devicetree/bindings/serial/amlogic,meson-uart.txt b/Documentation/devicetree/bindings/serial/amlogic,meson-uart.txt
> new file mode 100644
> index 0000000..fa1935a
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/serial/amlogic,meson-uart.txt
> @@ -0,0 +1,17 @@
> +Amlogic Meson UART
> +
> +Required properties:
> +- compatible : Should be "amlogic,meson-uart"
> +- reg : Address and length of the register set
> +- interrupts : Should contain uart interrupt
> +- clocks: phandle to the source clock
> +
> +Example:
> +
> +uart0: serial@c81004c0 {
> + compatible = "amlogic,meson-uart";
> + reg = <0xc81004c0 0x14>;
> + interrupts = <0 90 1>;
> + clocks = <&clk81>;
> +};
> +
> diff --git a/Documentation/devicetree/bindings/timer/amlogic,meson6-timer.txt b/Documentation/devicetree/bindings/timer/amlogic,meson6-timer.txt
> new file mode 100644
> index 0000000..cf89894
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/timer/amlogic,meson6-timer.txt
> @@ -0,0 +1,16 @@
> +Amlogic Meson6 SoCs Timer Controller
> +
> +Required properties:
> +
> +- compatible : should be "amlogic,meson6-timer.txt"
> +- reg : Specifies base physical address and size of the registers.
> +- interrupts : The interrupt of the first timer
> +
> +Example:
> +
> +timer@c1109940 {
> + compatible = "amlogic,meson6-timer";
> + reg = <0xc1109940 0x14>;
> + interrupts = <0 10 1>;
> +};
> +
> diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
> index ac7269f..5cf0618 100644
> --- a/Documentation/devicetree/bindings/vendor-prefixes.txt
> +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
> @@ -14,6 +14,7 @@ allwinner Allwinner Technology Co., Ltd.
> altr Altera Corp.
> amcc Applied Micro Circuits Corporation (APM, formally AMCC)
> amd Advanced Micro Devices (AMD), Inc.
> +amlogic Amlogic, Inc.
> ams AMS AG
> amstaos AMS-Taos Inc.
> apm Applied Micro Circuits Corporation (APM)
>
WARNING: multiple messages have this Message-ID (diff)
From: matthias.bgg@gmail.com (Matthias Brugger)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 7/7] ARM: meson: update documentation (uart, timer and vendors)
Date: Mon, 18 Aug 2014 12:36:47 +0200 [thread overview]
Message-ID: <53F1D73F.8010204@gmail.com> (raw)
In-Reply-To: <1408272594-10814-8-git-send-email-carlo@caione.org>
On 17/08/14 12:49, Carlo Caione wrote:
> New UART and timer bindings are documented. A new vendor is added to the
> vendors list.
>
> Signed-off-by: Carlo Caione <carlo@caione.org>
> ---
> .../devicetree/bindings/serial/amlogic,meson-uart.txt | 17 +++++++++++++++++
> .../devicetree/bindings/timer/amlogic,meson6-timer.txt | 16 ++++++++++++++++
> Documentation/devicetree/bindings/vendor-prefixes.txt | 1 +
> 3 files changed, 34 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/serial/amlogic,meson-uart.txt
> create mode 100644 Documentation/devicetree/bindings/timer/amlogic,meson6-timer.txt
This should be three patches for the different files. It might happen,
that for example your timer driver get merged through a different tree
then arm-soc. For the merge, the driver and the documentation should go
togehter.
>
> diff --git a/Documentation/devicetree/bindings/serial/amlogic,meson-uart.txt b/Documentation/devicetree/bindings/serial/amlogic,meson-uart.txt
> new file mode 100644
> index 0000000..fa1935a
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/serial/amlogic,meson-uart.txt
> @@ -0,0 +1,17 @@
> +Amlogic Meson UART
> +
> +Required properties:
> +- compatible : Should be "amlogic,meson-uart"
> +- reg : Address and length of the register set
> +- interrupts : Should contain uart interrupt
> +- clocks: phandle to the source clock
> +
> +Example:
> +
> +uart0: serial at c81004c0 {
> + compatible = "amlogic,meson-uart";
> + reg = <0xc81004c0 0x14>;
> + interrupts = <0 90 1>;
> + clocks = <&clk81>;
> +};
> +
> diff --git a/Documentation/devicetree/bindings/timer/amlogic,meson6-timer.txt b/Documentation/devicetree/bindings/timer/amlogic,meson6-timer.txt
> new file mode 100644
> index 0000000..cf89894
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/timer/amlogic,meson6-timer.txt
> @@ -0,0 +1,16 @@
> +Amlogic Meson6 SoCs Timer Controller
> +
> +Required properties:
> +
> +- compatible : should be "amlogic,meson6-timer.txt"
> +- reg : Specifies base physical address and size of the registers.
> +- interrupts : The interrupt of the first timer
> +
> +Example:
> +
> +timer at c1109940 {
> + compatible = "amlogic,meson6-timer";
> + reg = <0xc1109940 0x14>;
> + interrupts = <0 10 1>;
> +};
> +
> diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
> index ac7269f..5cf0618 100644
> --- a/Documentation/devicetree/bindings/vendor-prefixes.txt
> +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
> @@ -14,6 +14,7 @@ allwinner Allwinner Technology Co., Ltd.
> altr Altera Corp.
> amcc Applied Micro Circuits Corporation (APM, formally AMCC)
> amd Advanced Micro Devices (AMD), Inc.
> +amlogic Amlogic, Inc.
> ams AMS AG
> amstaos AMS-Taos Inc.
> apm Applied Micro Circuits Corporation (APM)
>
next prev parent reply other threads:[~2014-08-18 10:36 UTC|newest]
Thread overview: 66+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-08-17 10:49 [PATCH 0/7] ARM: meson: add preliminary support for MesonX/Meson6 SoCs Carlo Caione
2014-08-17 10:49 ` Carlo Caione
2014-08-17 10:49 ` [PATCH 1/7] ARM: meson: debug: add debug UART for earlyprintk support Carlo Caione
2014-08-17 10:49 ` Carlo Caione
2014-08-17 10:49 ` [PATCH 2/7] ARM: meson: serial: add MesonX SoC on-chip uart driver Carlo Caione
2014-08-17 10:49 ` Carlo Caione
2014-08-28 7:51 ` Carlo Caione
2014-08-28 7:51 ` Carlo Caione
2014-09-06 18:28 ` Carlo Caione
2014-09-06 18:28 ` Carlo Caione
2014-09-06 18:38 ` Greg KH
2014-09-06 18:38 ` Greg KH
2014-09-06 18:51 ` Carlo Caione
2014-09-06 18:51 ` Carlo Caione
2014-08-17 10:49 ` [PATCH 3/7] ARM: meson6: clocksource: add Meson6 timer support Carlo Caione
2014-08-17 10:49 ` Carlo Caione
2014-08-18 11:59 ` Matthias Brugger
2014-08-18 11:59 ` Matthias Brugger
2014-08-18 14:11 ` Carlo Caione
2014-08-18 14:11 ` Carlo Caione
2014-08-18 16:27 ` Mark Rutland
2014-08-18 16:27 ` Mark Rutland
2014-08-19 16:01 ` Carlo Caione
2014-08-19 16:01 ` Carlo Caione
2014-08-17 10:49 ` [PATCH 4/7] ARM: meson: add basic support for MesonX SoCs Carlo Caione
2014-08-17 10:49 ` Carlo Caione
2014-08-17 14:21 ` Maxime Ripard
2014-08-17 14:21 ` Maxime Ripard
2014-08-18 13:27 ` Carlo Caione
2014-08-18 13:27 ` Carlo Caione
2014-08-18 15:10 ` Matthias Brugger
2014-08-18 15:10 ` Matthias Brugger
2014-08-18 19:11 ` Maxime Ripard
2014-08-18 19:11 ` Maxime Ripard
2014-08-17 10:49 ` [PATCH 5/7] ARM: meson: dts: add basic Meson/Meson6/Meson6-atv1200 DTSI/DTS Carlo Caione
2014-08-17 10:49 ` Carlo Caione
2014-08-17 14:42 ` Beniamino Galvani
2014-08-17 14:42 ` Beniamino Galvani
2014-08-17 15:21 ` Carlo Caione
2014-08-17 15:21 ` Carlo Caione
2014-08-18 16:15 ` Mark Rutland
2014-08-18 16:15 ` Mark Rutland
2014-08-18 16:17 ` Mark Rutland
2014-08-18 16:17 ` Mark Rutland
2014-08-19 16:16 ` Carlo Caione
2014-08-19 16:16 ` Carlo Caione
2014-08-23 11:27 ` Andreas Färber
2014-08-23 11:27 ` Andreas Färber
2014-08-17 10:49 ` [PATCH 6/7] ARM: meson: update defconfigs Carlo Caione
2014-08-17 10:49 ` Carlo Caione
2014-08-18 10:31 ` Matthias Brugger
2014-08-18 10:31 ` Matthias Brugger
2014-08-18 13:31 ` Carlo Caione
2014-08-18 13:31 ` Carlo Caione
[not found] ` <1408272594-10814-1-git-send-email-carlo-KA+7E9HrN00dnm+yROfE0A@public.gmane.org>
2014-08-17 10:49 ` [PATCH 7/7] ARM: meson: update documentation (uart, timer and vendors) Carlo Caione
2014-08-17 10:49 ` Carlo Caione
2014-08-18 10:36 ` Matthias Brugger [this message]
2014-08-18 10:36 ` Matthias Brugger
2014-08-18 13:33 ` Carlo Caione
2014-08-18 13:33 ` Carlo Caione
2014-08-23 12:24 ` Andreas Färber
2014-08-23 12:24 ` Andreas Färber
2014-08-17 14:29 ` [PATCH 0/7] ARM: meson: add preliminary support for MesonX/Meson6 SoCs Beniamino Galvani
2014-08-17 14:29 ` Beniamino Galvani
2014-08-17 15:25 ` Carlo Caione
2014-08-17 15:25 ` Carlo Caione
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=53F1D73F.8010204@gmail.com \
--to=matthias.bgg@gmail.com \
--cc=b.galvani@gmail.com \
--cc=carlo@caione.org \
--cc=daniel.lezcano@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=grant.likely@linaro.org \
--cc=gregkh@linuxfoundation.org \
--cc=ijc+devicetree@hellion.org.uk \
--cc=jslaby@suse.cz \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-serial@vger.kernel.org \
--cc=linux@arm.linux.org.uk \
--cc=mark.rutland@arm.com \
--cc=robh+dt@kernel.org \
--cc=tglx@linutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.