[U-Boot] [PATCH 08/11] imx: ventana: configure i2c_dis# pin properly for gw53xx

[Stefano Babic <sbabic@denx.de>]

Hi Tim,

On 08/08/2014 07:35, Tim Harvey wrote:
> The i2c_dis# pinmux/padconf was missing for the GW53xx (this feature was
> added to the GW53xx on revB PCB's). Additionally, remove the duplicate
> config for GW54xx.
> 
> Signed-off-by: Tim Harvey <tharvey@gateworks.com>
> ---
>  board/gateworks/gw_ventana/gw_ventana.c | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/board/gateworks/gw_ventana/gw_ventana.c b/board/gateworks/gw_ventana/gw_ventana.c
> index 54e582b..98ee9df 100644
> --- a/board/gateworks/gw_ventana/gw_ventana.c
> +++ b/board/gateworks/gw_ventana/gw_ventana.c
> @@ -609,6 +609,8 @@ static iomux_v3_cfg_t const gw53xx_gpio_pads[] = {
>  	IOMUX_PADS(PAD_EIM_A19__GPIO2_IO19 | MUX_PAD_CTRL(NO_PAD_CTRL)),
>  	/* IOEXP_IRQ# */
>  	IOMUX_PADS(PAD_EIM_A20__GPIO2_IO18 | MUX_PAD_CTRL(NO_PAD_CTRL)),
> +	/* DIOI2C_DIS# */
> +	IOMUX_PADS(PAD_GPIO_19__GPIO4_IO05 | MUX_PAD_CTRL(NO_PAD_CTRL)),
>  
>  	/* MX6_LOCLED# */
>  	IOMUX_PADS(PAD_KEY_ROW4__GPIO4_IO15 | MUX_PAD_CTRL(NO_PAD_CTRL)),
> @@ -637,8 +639,6 @@ static iomux_v3_cfg_t const gw54xx_gpio_pads[] = {
>  	IOMUX_PADS(PAD_KEY_ROW1__GPIO4_IO09 | MUX_PAD_CTRL(NO_PAD_CTRL)),
>  	/* DIOI2C_DIS# */
>  	IOMUX_PADS(PAD_GPIO_19__GPIO4_IO05 | MUX_PAD_CTRL(NO_PAD_CTRL)),
> -	/* DIOI2C_DIS# */
> -	IOMUX_PADS(PAD_GPIO_19__GPIO4_IO05 | MUX_PAD_CTRL(NO_PAD_CTRL)),
>  	/* PCICK_SSON */
>  	IOMUX_PADS(PAD_SD1_CLK__GPIO1_IO20 | MUX_PAD_CTRL(NO_PAD_CTRL)),
>  	/* PCI_RST# */
> 

Applied to u-boot-imx, thanks !

Best regards,
Stefano Babic


-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================