Oops: 17 SMP ARM (v3.16-rc2)

[ipaton0@gmail.com (Iain Paton)]

On 19/08/14 07:03, Iain Paton wrote:
> On 17/08/14 22:46, Fabio Estevam wrote:
>> Iain,
>>
>> On Sun, Aug 17, 2014 at 6:34 PM, Iain Paton <ipaton0@gmail.com> wrote:
>>> On 15/08/14 06:42, Mattis Lorentzon wrote:
>>>
>>>> We mostly run SSH with benchmarks using NFS, it can probably be
>>>> triggered by using only SSH with the following loop:
>>>>
>>>> # while : ; do ssh arm-card date; done
>>>
>>> Mattis,
>>>
>>> What sort of time does it take for you to see a problem?
>>>
>>> I've been running the above for nearly two days on 3.16.0 on a board
>>> with fec interrupts routed through gpio_6 and haven't seen a hint of
>>> a problem.
>>
>> Thanks for testing.
>>
>> Which mx6 board have you used on this test?
> 
> It's currently pointed at a RIoTboard (atheros phy) but I'm happy to 
> try it against both a Sabre-Lite and a Wandboard B1, all running the 
> same kernel binary, as well. 
> 
> I'm interested enough in why different people get different results 
> with this that I'll put some time towards testing to try to help 
> narrow down the cause.
> 

two and a half days of running this against both a sabre-lite and a 
wandboard quad B1 and I still have no reason to think there's any 
sort of a problem.

Up to now, my testing has been done with my own config, I'll now
repeat the whole thing using the config Mattis posted to see if 
I can reproduce it that way.

Suggestions on a better / easier / quicker way to reproduce it are 
welcome.