* [PATCH V2 1/5] ARM: shmobile: r8a7791: add IIC0/1 clock macros @ 2014-03-10 11:26 ` Wolfram Sang 0 siblings, 0 replies; 20+ messages in thread From: Wolfram Sang @ 2014-03-10 11:26 UTC (permalink / raw) To: linux-arm-kernel From: Wolfram Sang <wsa@sang-engineering.com> Signed-off-by: Wolfram Sang <wsa@sang-engineering.com> --- Changes since V1: kept sorting intact include/dt-bindings/clock/r8a7791-clock.h | 2 ++ 1 file changed, 2 insertions(+) diff --git a/include/dt-bindings/clock/r8a7791-clock.h b/include/dt-bindings/clock/r8a7791-clock.h index 30f82f286e29..2df1a11faeb3 100644 --- a/include/dt-bindings/clock/r8a7791-clock.h +++ b/include/dt-bindings/clock/r8a7791-clock.h @@ -51,6 +51,8 @@ #define R8A7791_CLK_SDHI1 12 #define R8A7791_CLK_SDHI0 14 #define R8A7791_CLK_MMCIF0 15 +#define R8A7791_CLK_IIC0 18 +#define R8A7791_CLK_IIC1 23 #define R8A7791_CLK_SSUSB 28 #define R8A7791_CLK_CMT1 29 #define R8A7791_CLK_USBDMAC0 30 -- 1.9.0 ^ permalink raw reply related [flat|nested] 20+ messages in thread
* [PATCH V2 1/5] ARM: shmobile: r8a7791: add IIC0/1 clock macros @ 2014-03-10 11:26 ` Wolfram Sang 0 siblings, 0 replies; 20+ messages in thread From: Wolfram Sang @ 2014-03-10 11:26 UTC (permalink / raw) To: linux-arm-kernel From: Wolfram Sang <wsa@sang-engineering.com> Signed-off-by: Wolfram Sang <wsa@sang-engineering.com> --- Changes since V1: kept sorting intact include/dt-bindings/clock/r8a7791-clock.h | 2 ++ 1 file changed, 2 insertions(+) diff --git a/include/dt-bindings/clock/r8a7791-clock.h b/include/dt-bindings/clock/r8a7791-clock.h index 30f82f286e29..2df1a11faeb3 100644 --- a/include/dt-bindings/clock/r8a7791-clock.h +++ b/include/dt-bindings/clock/r8a7791-clock.h @@ -51,6 +51,8 @@ #define R8A7791_CLK_SDHI1 12 #define R8A7791_CLK_SDHI0 14 #define R8A7791_CLK_MMCIF0 15 +#define R8A7791_CLK_IIC0 18 +#define R8A7791_CLK_IIC1 23 #define R8A7791_CLK_SSUSB 28 #define R8A7791_CLK_CMT1 29 #define R8A7791_CLK_USBDMAC0 30 -- 1.9.0 ^ permalink raw reply related [flat|nested] 20+ messages in thread
* [PATCH V2 2/5] ARM: shmobile: r8a7791: add IIC(B) clocks to dtsi 2014-03-10 11:26 ` Wolfram Sang @ 2014-03-10 11:26 ` Wolfram Sang -1 siblings, 0 replies; 20+ messages in thread From: Wolfram Sang @ 2014-03-10 11:26 UTC (permalink / raw) To: linux-arm-kernel From: Wolfram Sang <wsa@sang-engineering.com> Signed-off-by: Wolfram Sang <wsa@sang-engineering.com> --- Changes since V1: kept sorting by bit number Note: Adding clocks whilst keeping the current sorting is very likely to break a previously working clock IMO. Imagine adding PCIEC clock inbetween IIC0 and IIC1 here. Adding chronologically and grouped by similar function blocks is easier to track IMO. An example addition could then look like: R8A7791_CLK_TPU0 R8A7791_CLK_SDHI2 R8A7791_CLK_SDHI1 R8A7791_CLK_SDHI0 R8A7791_CLK_MMCIF0 R8A7791_CLK_CMT1 R8A7791_CLK_IIC0 R8A7791_CLK_IIC1 + R8A7791_CLK_PCIEC arch/arm/boot/dts/r8a7791.dtsi | 25 +++++++++++++------------ 1 file changed, 13 insertions(+), 12 deletions(-) diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi index 71bac2ca4bcd..858a8a923b00 100644 --- a/arch/arm/boot/dts/r8a7791.dtsi +++ b/arch/arm/boot/dts/r8a7791.dtsi @@ -716,15 +716,16 @@ mstp3_clks: mstp3_clks@e615013c { compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks"; reg = <0 0xe615013c 0 4>, <0 0xe6150048 0 4>; - clocks = <&cp_clk>, <&sd2_clk>, <&sd1_clk>, - <&cpg_clocks R8A7791_CLK_SD0>, <&mmc0_clk>, <&rclk_clk>; + clocks = <&cp_clk>, <&sd2_clk>, <&sd1_clk>, <&cpg_clocks R8A7791_CLK_SD0>, + <&mmc0_clk>, <&hp_clk>, <&hp_clk>, <&rclk_clk>; #clock-cells = <1>; renesas,clock-indices = < - R8A7791_CLK_TPU0 R8A7791_CLK_SDHI2 R8A7791_CLK_SDHI1 - R8A7791_CLK_SDHI0 R8A7791_CLK_MMCIF0 R8A7791_CLK_CMT1 + R8A7791_CLK_TPU0 R8A7791_CLK_SDHI2 R8A7791_CLK_SDHI1 R8A7791_CLK_SDHI0 + R8A7791_CLK_MMCIF0 R8A7791_CLK_IIC0 R8A7791_CLK_IIC1 R8A7791_CLK_CMT1 >; clock-output-names - "tpu0", "sdhi2", "sdhi1", "sdhi0", "mmcif0", "cmt1"; + "tpu0", "sdhi2", "sdhi1", "sdhi0", + "mmcif0", "i2c7", "i2c8", "cmt1"; }; mstp5_clks: mstp5_clks@e6150144 { compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks"; @@ -768,17 +769,17 @@ mstp9_clks: mstp9_clks@e6150994 { compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks"; reg = <0 0xe6150994 0 4>, <0 0xe61509a4 0 4>; - clocks = <&p_clk>, <&p_clk>, <&cpg_clocks R8A7791_CLK_QSPI>, - <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>, - <&p_clk>; + clocks = <&p_clk>, <&p_clk>, <&cpg_clocks R8A7791_CLK_QSPI>, <&p_clk>, + <&cp_clk>, <&p_clk>, <&p_clk>, <&p_clk>, + <&p_clk>, <&p_clk>; #clock-cells = <1>; renesas,clock-indices = < - R8A7791_CLK_RCAN1 R8A7791_CLK_RCAN0 R8A7791_CLK_QSPI_MOD - R8A7791_CLK_I2C5 R8A7791_CLK_I2C4 R8A7791_CLK_I2C3 - R8A7791_CLK_I2C2 R8A7791_CLK_I2C1 R8A7791_CLK_I2C0 + R8A7791_CLK_RCAN1 R8A7791_CLK_RCAN0 R8A7791_CLK_QSPI_MOD R8A7791_CLK_I2C5 + R8A7791_CLK_IICDVFS R8A7791_CLK_I2C4 R8A7791_CLK_I2C3 R8A7791_CLK_I2C2 + R8A7791_CLK_I2C1 R8A7791_CLK_I2C0 >; clock-output-names - "rcan1", "rcan0", "qspi_mod", "i2c5", "i2c4", "i2c3", + "rcan1", "rcan0", "qspi_mod", "i2c5", "i2c6", "i2c4", "i2c3", "i2c2", "i2c1", "i2c0"; }; mstp11_clks: mstp11_clks@e615099c { -- 1.9.0 ^ permalink raw reply related [flat|nested] 20+ messages in thread
* [PATCH V2 2/5] ARM: shmobile: r8a7791: add IIC(B) clocks to dtsi @ 2014-03-10 11:26 ` Wolfram Sang 0 siblings, 0 replies; 20+ messages in thread From: Wolfram Sang @ 2014-03-10 11:26 UTC (permalink / raw) To: linux-arm-kernel From: Wolfram Sang <wsa@sang-engineering.com> Signed-off-by: Wolfram Sang <wsa@sang-engineering.com> --- Changes since V1: kept sorting by bit number Note: Adding clocks whilst keeping the current sorting is very likely to break a previously working clock IMO. Imagine adding PCIEC clock inbetween IIC0 and IIC1 here. Adding chronologically and grouped by similar function blocks is easier to track IMO. An example addition could then look like: R8A7791_CLK_TPU0 R8A7791_CLK_SDHI2 R8A7791_CLK_SDHI1 R8A7791_CLK_SDHI0 R8A7791_CLK_MMCIF0 R8A7791_CLK_CMT1 R8A7791_CLK_IIC0 R8A7791_CLK_IIC1 + R8A7791_CLK_PCIEC arch/arm/boot/dts/r8a7791.dtsi | 25 +++++++++++++------------ 1 file changed, 13 insertions(+), 12 deletions(-) diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi index 71bac2ca4bcd..858a8a923b00 100644 --- a/arch/arm/boot/dts/r8a7791.dtsi +++ b/arch/arm/boot/dts/r8a7791.dtsi @@ -716,15 +716,16 @@ mstp3_clks: mstp3_clks at e615013c { compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks"; reg = <0 0xe615013c 0 4>, <0 0xe6150048 0 4>; - clocks = <&cp_clk>, <&sd2_clk>, <&sd1_clk>, - <&cpg_clocks R8A7791_CLK_SD0>, <&mmc0_clk>, <&rclk_clk>; + clocks = <&cp_clk>, <&sd2_clk>, <&sd1_clk>, <&cpg_clocks R8A7791_CLK_SD0>, + <&mmc0_clk>, <&hp_clk>, <&hp_clk>, <&rclk_clk>; #clock-cells = <1>; renesas,clock-indices = < - R8A7791_CLK_TPU0 R8A7791_CLK_SDHI2 R8A7791_CLK_SDHI1 - R8A7791_CLK_SDHI0 R8A7791_CLK_MMCIF0 R8A7791_CLK_CMT1 + R8A7791_CLK_TPU0 R8A7791_CLK_SDHI2 R8A7791_CLK_SDHI1 R8A7791_CLK_SDHI0 + R8A7791_CLK_MMCIF0 R8A7791_CLK_IIC0 R8A7791_CLK_IIC1 R8A7791_CLK_CMT1 >; clock-output-names = - "tpu0", "sdhi2", "sdhi1", "sdhi0", "mmcif0", "cmt1"; + "tpu0", "sdhi2", "sdhi1", "sdhi0", + "mmcif0", "i2c7", "i2c8", "cmt1"; }; mstp5_clks: mstp5_clks at e6150144 { compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks"; @@ -768,17 +769,17 @@ mstp9_clks: mstp9_clks at e6150994 { compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks"; reg = <0 0xe6150994 0 4>, <0 0xe61509a4 0 4>; - clocks = <&p_clk>, <&p_clk>, <&cpg_clocks R8A7791_CLK_QSPI>, - <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>, - <&p_clk>; + clocks = <&p_clk>, <&p_clk>, <&cpg_clocks R8A7791_CLK_QSPI>, <&p_clk>, + <&cp_clk>, <&p_clk>, <&p_clk>, <&p_clk>, + <&p_clk>, <&p_clk>; #clock-cells = <1>; renesas,clock-indices = < - R8A7791_CLK_RCAN1 R8A7791_CLK_RCAN0 R8A7791_CLK_QSPI_MOD - R8A7791_CLK_I2C5 R8A7791_CLK_I2C4 R8A7791_CLK_I2C3 - R8A7791_CLK_I2C2 R8A7791_CLK_I2C1 R8A7791_CLK_I2C0 + R8A7791_CLK_RCAN1 R8A7791_CLK_RCAN0 R8A7791_CLK_QSPI_MOD R8A7791_CLK_I2C5 + R8A7791_CLK_IICDVFS R8A7791_CLK_I2C4 R8A7791_CLK_I2C3 R8A7791_CLK_I2C2 + R8A7791_CLK_I2C1 R8A7791_CLK_I2C0 >; clock-output-names = - "rcan1", "rcan0", "qspi_mod", "i2c5", "i2c4", "i2c3", + "rcan1", "rcan0", "qspi_mod", "i2c5", "i2c6", "i2c4", "i2c3", "i2c2", "i2c1", "i2c0"; }; mstp11_clks: mstp11_clks at e615099c { -- 1.9.0 ^ permalink raw reply related [flat|nested] 20+ messages in thread
* [PATCH V2 3/5] ARM: shmobile: r8a7791: add IIC(B) cores to dtsi 2014-03-10 11:26 ` Wolfram Sang @ 2014-03-10 11:26 ` Wolfram Sang -1 siblings, 0 replies; 20+ messages in thread From: Wolfram Sang @ 2014-03-10 11:26 UTC (permalink / raw) To: linux-arm-kernel From: Wolfram Sang <wsa@sang-engineering.com> Signed-off-by: Wolfram Sang <wsa@sang-engineering.com> --- Changes since V1: use better compatible name "renesas,iic-r8a7791" arch/arm/boot/dts/r8a7791.dtsi | 36 ++++++++++++++++++++++++++++++++++++ 1 file changed, 36 insertions(+) diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi index 858a8a923b00..f71670a5bfbc 100644 --- a/arch/arm/boot/dts/r8a7791.dtsi +++ b/arch/arm/boot/dts/r8a7791.dtsi @@ -27,6 +27,9 @@ i2c3 = &i2c3; i2c4 = &i2c4; i2c5 = &i2c5; + i2c6 = &i2c6; + i2c7 = &i2c7; + i2c8 = &i2c8; spi0 = &qspi; spi1 = &msiof0; spi2 = &msiof1; @@ -184,6 +187,7 @@ <0 17 IRQ_TYPE_LEVEL_HIGH>; }; + /* The memory map in the User's Manual maps the cores to bus numbers */ i2c0: i2c@e6508000 { #address-cells = <1>; #size-cells = <0>; @@ -235,6 +239,7 @@ }; i2c5: i2c@e6528000 { + /* doesn't need pinmux */ #address-cells = <1>; #size-cells = <0>; compatible = "renesas,i2c-r8a7791"; @@ -244,6 +249,37 @@ status = "disabled"; }; + i2c6: i2c@e60b0000 { + /* doesn't need pinmux */ + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,iic-r8a7791", "renesas,rmobile-iic"; + reg = <0 0xe60b0000 0 0x425>; + interrupts = <0 173 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp9_clks R8A7791_CLK_IICDVFS>; + status = "disabled"; + }; + + i2c7: i2c@e6500000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,iic-r8a7791", "renesas,rmobile-iic"; + reg = <0 0xe6500000 0 0x425>; + interrupts = <0 174 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp3_clks R8A7791_CLK_IIC0>; + status = "disabled"; + }; + + i2c8: i2c@e6510000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,iic-r8a7791", "renesas,rmobile-iic"; + reg = <0 0xe6510000 0 0x425>; + interrupts = <0 175 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp3_clks R8A7791_CLK_IIC1>; + status = "disabled"; + }; + pfc: pfc@e6060000 { compatible = "renesas,pfc-r8a7791"; reg = <0 0xe6060000 0 0x250>; -- 1.9.0 ^ permalink raw reply related [flat|nested] 20+ messages in thread
* [PATCH V2 3/5] ARM: shmobile: r8a7791: add IIC(B) cores to dtsi @ 2014-03-10 11:26 ` Wolfram Sang 0 siblings, 0 replies; 20+ messages in thread From: Wolfram Sang @ 2014-03-10 11:26 UTC (permalink / raw) To: linux-arm-kernel From: Wolfram Sang <wsa@sang-engineering.com> Signed-off-by: Wolfram Sang <wsa@sang-engineering.com> --- Changes since V1: use better compatible name "renesas,iic-r8a7791" arch/arm/boot/dts/r8a7791.dtsi | 36 ++++++++++++++++++++++++++++++++++++ 1 file changed, 36 insertions(+) diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi index 858a8a923b00..f71670a5bfbc 100644 --- a/arch/arm/boot/dts/r8a7791.dtsi +++ b/arch/arm/boot/dts/r8a7791.dtsi @@ -27,6 +27,9 @@ i2c3 = &i2c3; i2c4 = &i2c4; i2c5 = &i2c5; + i2c6 = &i2c6; + i2c7 = &i2c7; + i2c8 = &i2c8; spi0 = &qspi; spi1 = &msiof0; spi2 = &msiof1; @@ -184,6 +187,7 @@ <0 17 IRQ_TYPE_LEVEL_HIGH>; }; + /* The memory map in the User's Manual maps the cores to bus numbers */ i2c0: i2c at e6508000 { #address-cells = <1>; #size-cells = <0>; @@ -235,6 +239,7 @@ }; i2c5: i2c at e6528000 { + /* doesn't need pinmux */ #address-cells = <1>; #size-cells = <0>; compatible = "renesas,i2c-r8a7791"; @@ -244,6 +249,37 @@ status = "disabled"; }; + i2c6: i2c at e60b0000 { + /* doesn't need pinmux */ + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,iic-r8a7791", "renesas,rmobile-iic"; + reg = <0 0xe60b0000 0 0x425>; + interrupts = <0 173 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp9_clks R8A7791_CLK_IICDVFS>; + status = "disabled"; + }; + + i2c7: i2c at e6500000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,iic-r8a7791", "renesas,rmobile-iic"; + reg = <0 0xe6500000 0 0x425>; + interrupts = <0 174 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp3_clks R8A7791_CLK_IIC0>; + status = "disabled"; + }; + + i2c8: i2c at e6510000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,iic-r8a7791", "renesas,rmobile-iic"; + reg = <0 0xe6510000 0 0x425>; + interrupts = <0 175 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp3_clks R8A7791_CLK_IIC1>; + status = "disabled"; + }; + pfc: pfc at e6060000 { compatible = "renesas,pfc-r8a7791"; reg = <0 0xe6060000 0 0x250>; -- 1.9.0 ^ permalink raw reply related [flat|nested] 20+ messages in thread
* Re: [PATCH V2 3/5] ARM: shmobile: r8a7791: add IIC(B) cores to dtsi 2014-03-10 11:26 ` Wolfram Sang @ 2014-08-21 20:53 ` Sergei Shtylyov -1 siblings, 0 replies; 20+ messages in thread From: Sergei Shtylyov @ 2014-08-21 20:53 UTC (permalink / raw) To: linux-arm-kernel Hello. On 03/10/2014 03:26 PM, Wolfram Sang wrote: > From: Wolfram Sang <wsa@sang-engineering.com> > Signed-off-by: Wolfram Sang <wsa@sang-engineering.com> > --- > > Changes since V1: use better compatible name "renesas,iic-r8a7791" > arch/arm/boot/dts/r8a7791.dtsi | 36 ++++++++++++++++++++++++++++++++++++ > 1 file changed, 36 insertions(+) > diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi > index 858a8a923b00..f71670a5bfbc 100644 > --- a/arch/arm/boot/dts/r8a7791.dtsi > +++ b/arch/arm/boot/dts/r8a7791.dtsi > @@ -27,6 +27,9 @@ > i2c3 = &i2c3; > i2c4 = &i2c4; > i2c5 = &i2c5; > + i2c6 = &i2c6; > + i2c7 = &i2c7; > + i2c8 = &i2c8; > spi0 = &qspi; > spi1 = &msiof0; > spi2 = &msiof1; [...] > @@ -244,6 +249,37 @@ > status = "disabled"; > }; > > + i2c6: i2c@e60b0000 { Hm, you finally labelled the nodes "iic[0-3]:" in the R8A7790 patch but not in this patch... what was the reason, did you just forgot to do it? Will you fix this or should I? WBR, Sergei ^ permalink raw reply [flat|nested] 20+ messages in thread
* [PATCH V2 3/5] ARM: shmobile: r8a7791: add IIC(B) cores to dtsi @ 2014-08-21 20:53 ` Sergei Shtylyov 0 siblings, 0 replies; 20+ messages in thread From: Sergei Shtylyov @ 2014-08-21 20:53 UTC (permalink / raw) To: linux-arm-kernel Hello. On 03/10/2014 03:26 PM, Wolfram Sang wrote: > From: Wolfram Sang <wsa@sang-engineering.com> > Signed-off-by: Wolfram Sang <wsa@sang-engineering.com> > --- > > Changes since V1: use better compatible name "renesas,iic-r8a7791" > arch/arm/boot/dts/r8a7791.dtsi | 36 ++++++++++++++++++++++++++++++++++++ > 1 file changed, 36 insertions(+) > diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi > index 858a8a923b00..f71670a5bfbc 100644 > --- a/arch/arm/boot/dts/r8a7791.dtsi > +++ b/arch/arm/boot/dts/r8a7791.dtsi > @@ -27,6 +27,9 @@ > i2c3 = &i2c3; > i2c4 = &i2c4; > i2c5 = &i2c5; > + i2c6 = &i2c6; > + i2c7 = &i2c7; > + i2c8 = &i2c8; > spi0 = &qspi; > spi1 = &msiof0; > spi2 = &msiof1; [...] > @@ -244,6 +249,37 @@ > status = "disabled"; > }; > > + i2c6: i2c at e60b0000 { Hm, you finally labelled the nodes "iic[0-3]:" in the R8A7790 patch but not in this patch... what was the reason, did you just forgot to do it? Will you fix this or should I? WBR, Sergei ^ permalink raw reply [flat|nested] 20+ messages in thread
* [PATCH V2 4/5] ARM: shmobile: koelsch: make i2c2-pfc node unique 2014-03-10 11:26 ` Wolfram Sang @ 2014-03-10 11:26 ` Wolfram Sang -1 siblings, 0 replies; 20+ messages in thread From: Wolfram Sang @ 2014-03-10 11:26 UTC (permalink / raw) To: linux-arm-kernel From: Wolfram Sang <wsa@sang-engineering.com> This node should have a unique name so it can be distinguished when other i2c busses are added later. Signed-off-by: Wolfram Sang <wsa@sang-engineering.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> --- Changes since V1: added ack arch/arm/boot/dts/r8a7791-koelsch.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts b/arch/arm/boot/dts/r8a7791-koelsch.dts index e24fed9c0462..5e90f18db1fb 100644 --- a/arch/arm/boot/dts/r8a7791-koelsch.dts +++ b/arch/arm/boot/dts/r8a7791-koelsch.dts @@ -199,7 +199,7 @@ pinctrl-0 = <&du_pins &scif0_pins &scif1_pins>; pinctrl-names = "default"; - i2c2_pins: i2c { + i2c2_pins: i2c2 { renesas,groups = "i2c2"; renesas,function = "i2c2"; }; -- 1.9.0 ^ permalink raw reply related [flat|nested] 20+ messages in thread
* [PATCH V2 4/5] ARM: shmobile: koelsch: make i2c2-pfc node unique @ 2014-03-10 11:26 ` Wolfram Sang 0 siblings, 0 replies; 20+ messages in thread From: Wolfram Sang @ 2014-03-10 11:26 UTC (permalink / raw) To: linux-arm-kernel From: Wolfram Sang <wsa@sang-engineering.com> This node should have a unique name so it can be distinguished when other i2c busses are added later. Signed-off-by: Wolfram Sang <wsa@sang-engineering.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> --- Changes since V1: added ack arch/arm/boot/dts/r8a7791-koelsch.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts b/arch/arm/boot/dts/r8a7791-koelsch.dts index e24fed9c0462..5e90f18db1fb 100644 --- a/arch/arm/boot/dts/r8a7791-koelsch.dts +++ b/arch/arm/boot/dts/r8a7791-koelsch.dts @@ -199,7 +199,7 @@ pinctrl-0 = <&du_pins &scif0_pins &scif1_pins>; pinctrl-names = "default"; - i2c2_pins: i2c { + i2c2_pins: i2c2 { renesas,groups = "i2c2"; renesas,function = "i2c2"; }; -- 1.9.0 ^ permalink raw reply related [flat|nested] 20+ messages in thread
* [PATCH V2 5/5] ARM: shmobile: koelsch: activate i2c6 bus 2014-03-10 11:26 ` Wolfram Sang @ 2014-03-10 11:27 ` Wolfram Sang -1 siblings, 0 replies; 20+ messages in thread From: Wolfram Sang @ 2014-03-10 11:27 UTC (permalink / raw) To: linux-arm-kernel From: Wolfram Sang <wsa@sang-engineering.com> Signed-off-by: Wolfram Sang <wsa@sang-engineering.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> --- Changes since V1: added ack arch/arm/boot/dts/r8a7791-koelsch.dts | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts b/arch/arm/boot/dts/r8a7791-koelsch.dts index 5e90f18db1fb..2151f73e5eef 100644 --- a/arch/arm/boot/dts/r8a7791-koelsch.dts +++ b/arch/arm/boot/dts/r8a7791-koelsch.dts @@ -195,6 +195,11 @@ }; }; +&i2c6 { + status = "okay"; + clock-frequency = <100000>; +}; + &pfc { pinctrl-0 = <&du_pins &scif0_pins &scif1_pins>; pinctrl-names = "default"; -- 1.9.0 ^ permalink raw reply related [flat|nested] 20+ messages in thread
* [PATCH V2 5/5] ARM: shmobile: koelsch: activate i2c6 bus @ 2014-03-10 11:27 ` Wolfram Sang 0 siblings, 0 replies; 20+ messages in thread From: Wolfram Sang @ 2014-03-10 11:27 UTC (permalink / raw) To: linux-arm-kernel From: Wolfram Sang <wsa@sang-engineering.com> Signed-off-by: Wolfram Sang <wsa@sang-engineering.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> --- Changes since V1: added ack arch/arm/boot/dts/r8a7791-koelsch.dts | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts b/arch/arm/boot/dts/r8a7791-koelsch.dts index 5e90f18db1fb..2151f73e5eef 100644 --- a/arch/arm/boot/dts/r8a7791-koelsch.dts +++ b/arch/arm/boot/dts/r8a7791-koelsch.dts @@ -195,6 +195,11 @@ }; }; +&i2c6 { + status = "okay"; + clock-frequency = <100000>; +}; + &pfc { pinctrl-0 = <&du_pins &scif0_pins &scif1_pins>; pinctrl-names = "default"; -- 1.9.0 ^ permalink raw reply related [flat|nested] 20+ messages in thread
* Re: [PATCH V2 1/5] ARM: shmobile: r8a7791: add IIC0/1 clock macros 2014-03-10 11:26 ` Wolfram Sang @ 2014-03-10 11:36 ` Laurent Pinchart -1 siblings, 0 replies; 20+ messages in thread From: Laurent Pinchart @ 2014-03-10 11:36 UTC (permalink / raw) To: linux-arm-kernel Hi Wolfram, Thank you for the patches. For the whole series, Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> On Monday 10 March 2014 12:26:56 Wolfram Sang wrote: > From: Wolfram Sang <wsa@sang-engineering.com> > > Signed-off-by: Wolfram Sang <wsa@sang-engineering.com> > --- > > Changes since V1: kept sorting intact > > include/dt-bindings/clock/r8a7791-clock.h | 2 ++ > 1 file changed, 2 insertions(+) > > diff --git a/include/dt-bindings/clock/r8a7791-clock.h > b/include/dt-bindings/clock/r8a7791-clock.h index > 30f82f286e29..2df1a11faeb3 100644 > --- a/include/dt-bindings/clock/r8a7791-clock.h > +++ b/include/dt-bindings/clock/r8a7791-clock.h > @@ -51,6 +51,8 @@ > #define R8A7791_CLK_SDHI1 12 > #define R8A7791_CLK_SDHI0 14 > #define R8A7791_CLK_MMCIF0 15 > +#define R8A7791_CLK_IIC0 18 > +#define R8A7791_CLK_IIC1 23 > #define R8A7791_CLK_SSUSB 28 > #define R8A7791_CLK_CMT1 29 > #define R8A7791_CLK_USBDMAC0 30 -- Regards, Laurent Pinchart ^ permalink raw reply [flat|nested] 20+ messages in thread
* [PATCH V2 1/5] ARM: shmobile: r8a7791: add IIC0/1 clock macros @ 2014-03-10 11:36 ` Laurent Pinchart 0 siblings, 0 replies; 20+ messages in thread From: Laurent Pinchart @ 2014-03-10 11:36 UTC (permalink / raw) To: linux-arm-kernel Hi Wolfram, Thank you for the patches. For the whole series, Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> On Monday 10 March 2014 12:26:56 Wolfram Sang wrote: > From: Wolfram Sang <wsa@sang-engineering.com> > > Signed-off-by: Wolfram Sang <wsa@sang-engineering.com> > --- > > Changes since V1: kept sorting intact > > include/dt-bindings/clock/r8a7791-clock.h | 2 ++ > 1 file changed, 2 insertions(+) > > diff --git a/include/dt-bindings/clock/r8a7791-clock.h > b/include/dt-bindings/clock/r8a7791-clock.h index > 30f82f286e29..2df1a11faeb3 100644 > --- a/include/dt-bindings/clock/r8a7791-clock.h > +++ b/include/dt-bindings/clock/r8a7791-clock.h > @@ -51,6 +51,8 @@ > #define R8A7791_CLK_SDHI1 12 > #define R8A7791_CLK_SDHI0 14 > #define R8A7791_CLK_MMCIF0 15 > +#define R8A7791_CLK_IIC0 18 > +#define R8A7791_CLK_IIC1 23 > #define R8A7791_CLK_SSUSB 28 > #define R8A7791_CLK_CMT1 29 > #define R8A7791_CLK_USBDMAC0 30 -- Regards, Laurent Pinchart ^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [PATCH V2 1/5] ARM: shmobile: r8a7791: add IIC0/1 clock macros 2014-03-10 11:36 ` Laurent Pinchart @ 2014-03-26 5:09 ` Magnus Damm -1 siblings, 0 replies; 20+ messages in thread From: Magnus Damm @ 2014-03-26 5:09 UTC (permalink / raw) To: linux-arm-kernel Hi Simon, Wolfram, Laurent, everyone, On Mon, Mar 10, 2014 at 8:36 PM, Laurent Pinchart <laurent.pinchart@ideasonboard.com> wrote: > Hi Wolfram, > > Thank you for the patches. > > For the whole series, > > Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> I've now given the patches in this series a spin on top of renesas-devel-v3.14-rc8-20140325v2. To clarify, I can't seem to find any cover letter for this series, so instead I will with this email reply to [1/1]. Here is also a list of the patches that I believe are part of this series, please correct me if I'm wrong: [PATCH V2 1/5] ARM: shmobile: r8a7791: add IIC0/1 clock macros [PATCH V2 2/5] ARM: shmobile: r8a7791: add IIC(B) clocks to dtsi [PATCH V2 3/5] ARM: shmobile: r8a7791: add IIC(B) cores to dtsi [PATCH V2 4/5] ARM: shmobile: koelsch: make i2c2-pfc node unique [PATCH V2 5/5] ARM: shmobile: koelsch: activate i2c6 bus They all look good to me! Acked-by: Magnus Damm <damm@opensource.se> Simon, can you please pick up these changes? I believe there are no special dependencies. Thanks, / magnus ^ permalink raw reply [flat|nested] 20+ messages in thread
* [PATCH V2 1/5] ARM: shmobile: r8a7791: add IIC0/1 clock macros @ 2014-03-26 5:09 ` Magnus Damm 0 siblings, 0 replies; 20+ messages in thread From: Magnus Damm @ 2014-03-26 5:09 UTC (permalink / raw) To: linux-arm-kernel Hi Simon, Wolfram, Laurent, everyone, On Mon, Mar 10, 2014 at 8:36 PM, Laurent Pinchart <laurent.pinchart@ideasonboard.com> wrote: > Hi Wolfram, > > Thank you for the patches. > > For the whole series, > > Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> I've now given the patches in this series a spin on top of renesas-devel-v3.14-rc8-20140325v2. To clarify, I can't seem to find any cover letter for this series, so instead I will with this email reply to [1/1]. Here is also a list of the patches that I believe are part of this series, please correct me if I'm wrong: [PATCH V2 1/5] ARM: shmobile: r8a7791: add IIC0/1 clock macros [PATCH V2 2/5] ARM: shmobile: r8a7791: add IIC(B) clocks to dtsi [PATCH V2 3/5] ARM: shmobile: r8a7791: add IIC(B) cores to dtsi [PATCH V2 4/5] ARM: shmobile: koelsch: make i2c2-pfc node unique [PATCH V2 5/5] ARM: shmobile: koelsch: activate i2c6 bus They all look good to me! Acked-by: Magnus Damm <damm@opensource.se> Simon, can you please pick up these changes? I believe there are no special dependencies. Thanks, / magnus ^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [PATCH V2 1/5] ARM: shmobile: r8a7791: add IIC0/1 clock macros 2014-03-26 5:09 ` Magnus Damm @ 2014-03-26 6:29 ` Wolfram Sang -1 siblings, 0 replies; 20+ messages in thread From: Wolfram Sang @ 2014-03-26 6:29 UTC (permalink / raw) To: linux-arm-kernel [-- Attachment #1: Type: text/plain, Size: 555 bytes --] > To clarify, I can't seem to find any cover letter for this series, so > instead I will with this email reply to [1/1]. Here is also a list of > the patches that I believe are part of this series, please correct me > if I'm wrong: You are absolutely right. > They all look good to me! > > Acked-by: Magnus Damm <damm@opensource.se> Thanks! > Simon, can you please pick up these changes? I believe there are no > special dependencies. The dependencies (pfc entries and new compatible for the driver) are already in linux-next. [-- Attachment #2: Digital signature --] [-- Type: application/pgp-signature, Size: 836 bytes --] ^ permalink raw reply [flat|nested] 20+ messages in thread
* [PATCH V2 1/5] ARM: shmobile: r8a7791: add IIC0/1 clock macros @ 2014-03-26 6:29 ` Wolfram Sang 0 siblings, 0 replies; 20+ messages in thread From: Wolfram Sang @ 2014-03-26 6:29 UTC (permalink / raw) To: linux-arm-kernel > To clarify, I can't seem to find any cover letter for this series, so > instead I will with this email reply to [1/1]. Here is also a list of > the patches that I believe are part of this series, please correct me > if I'm wrong: You are absolutely right. > They all look good to me! > > Acked-by: Magnus Damm <damm@opensource.se> Thanks! > Simon, can you please pick up these changes? I believe there are no > special dependencies. The dependencies (pfc entries and new compatible for the driver) are already in linux-next. -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 836 bytes Desc: Digital signature URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20140326/5d88e509/attachment.sig> ^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [PATCH V2 1/5] ARM: shmobile: r8a7791: add IIC0/1 clock macros 2014-03-26 6:29 ` Wolfram Sang @ 2014-03-26 17:15 ` Simon Horman -1 siblings, 0 replies; 20+ messages in thread From: Simon Horman @ 2014-03-26 17:15 UTC (permalink / raw) To: linux-arm-kernel On Wed, Mar 26, 2014 at 07:29:33AM +0100, Wolfram Sang wrote: > > > To clarify, I can't seem to find any cover letter for this series, so > > instead I will with this email reply to [1/1]. Here is also a list of > > the patches that I believe are part of this series, please correct me > > if I'm wrong: > > You are absolutely right. > > > They all look good to me! > > > > Acked-by: Magnus Damm <damm@opensource.se> > > Thanks! > > > Simon, can you please pick up these changes? I believe there are no > > special dependencies. > > The dependencies (pfc entries and new compatible for the driver) are > already in linux-next. Thanks, I have queued these up. ^ permalink raw reply [flat|nested] 20+ messages in thread
* [PATCH V2 1/5] ARM: shmobile: r8a7791: add IIC0/1 clock macros @ 2014-03-26 17:15 ` Simon Horman 0 siblings, 0 replies; 20+ messages in thread From: Simon Horman @ 2014-03-26 17:15 UTC (permalink / raw) To: linux-arm-kernel On Wed, Mar 26, 2014 at 07:29:33AM +0100, Wolfram Sang wrote: > > > To clarify, I can't seem to find any cover letter for this series, so > > instead I will with this email reply to [1/1]. Here is also a list of > > the patches that I believe are part of this series, please correct me > > if I'm wrong: > > You are absolutely right. > > > They all look good to me! > > > > Acked-by: Magnus Damm <damm@opensource.se> > > Thanks! > > > Simon, can you please pick up these changes? I believe there are no > > special dependencies. > > The dependencies (pfc entries and new compatible for the driver) are > already in linux-next. Thanks, I have queued these up. ^ permalink raw reply [flat|nested] 20+ messages in thread
end of thread, other threads:[~2014-08-21 20:53 UTC | newest] Thread overview: 20+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2014-03-10 11:26 [PATCH V2 1/5] ARM: shmobile: r8a7791: add IIC0/1 clock macros Wolfram Sang 2014-03-10 11:26 ` Wolfram Sang 2014-03-10 11:26 ` [PATCH V2 2/5] ARM: shmobile: r8a7791: add IIC(B) clocks to dtsi Wolfram Sang 2014-03-10 11:26 ` Wolfram Sang 2014-03-10 11:26 ` [PATCH V2 3/5] ARM: shmobile: r8a7791: add IIC(B) cores " Wolfram Sang 2014-03-10 11:26 ` Wolfram Sang 2014-08-21 20:53 ` Sergei Shtylyov 2014-08-21 20:53 ` Sergei Shtylyov 2014-03-10 11:26 ` [PATCH V2 4/5] ARM: shmobile: koelsch: make i2c2-pfc node unique Wolfram Sang 2014-03-10 11:26 ` Wolfram Sang 2014-03-10 11:27 ` [PATCH V2 5/5] ARM: shmobile: koelsch: activate i2c6 bus Wolfram Sang 2014-03-10 11:27 ` Wolfram Sang 2014-03-10 11:36 ` [PATCH V2 1/5] ARM: shmobile: r8a7791: add IIC0/1 clock macros Laurent Pinchart 2014-03-10 11:36 ` Laurent Pinchart 2014-03-26 5:09 ` Magnus Damm 2014-03-26 5:09 ` Magnus Damm 2014-03-26 6:29 ` Wolfram Sang 2014-03-26 6:29 ` Wolfram Sang 2014-03-26 17:15 ` Simon Horman 2014-03-26 17:15 ` Simon Horman
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.