All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Andreas Färber" <afaerber@suse.de>
To: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: Javier Martinez Canillas <javier.martinez@collabora.co.uk>,
	Kukjin Kim <kgene.kim@samsung.com>,
	Doug Anderson <dianders@chromium.org>,
	Olof Johansson <olof@lixom.net>,
	Kevin Hilman <khilman@linaro.org>,
	Ajay Kumar <ajaykumar.rs@samsung.com>,
	linux-samsung-soc@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org
Subject: Re: [PATCH v2 1/1] ARM: exynos_defconfig: Enable options for display panel support
Date: Mon, 25 Aug 2014 13:49:56 +0200	[thread overview]
Message-ID: <53FB22E4.8040906@suse.de> (raw)
In-Reply-To: <5825205.70RuHaSG5p@amdc1032>

Hi,

Am 25.08.2014 13:43, schrieb Bartlomiej Zolnierkiewicz:
> On Monday, August 25, 2014 10:45:36 AM Javier Martinez Canillas wrote:
>> Many Exynos devices have a display panel. Most of them just have
>> a simple panel while others have more complex configurations that
>> requires an embedded DisplayPort (eDP) to LVDS bridges.
>>
>> This patch enables the following features to be built in the kernel
>> image to suport both setups:
>>
>> - Direct Rendering Manager (DRM)
>> - DRM bridge registration and lookup framework
>> - Parade ps8622/ps8625 eDP/LVDS bridge
>> - NXP ptn3460 eDP/LVDS bridge
>> - Exynos Fully Interactive Mobile Display controller (FIMD)
>> - Panel registration and lookup framework
>> - Simple panels
>> - Backlight & LCD device support
>>
>> Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
>> Tested-by: Kevin Hilman <khilman@linaro.org>
> 
> Could you please also do corresponding update to multi_v7_defconfig?

As was mentioned in v1 (but now below), some of these options depend on
patches yet to be respun and be accepted into drm, so I would consider
this an RFC patch and suggest to wait with multi_v7.

It could of course be split, as CONFIG_DRM_EXYNOS* and backlight parts
are certainly okay.

Regards,
Andreas

> 
> Best regards,
> --
> Bartlomiej Zolnierkiewicz
> Samsung R&D Institute Poland
> Samsung Electronics
> 
>> ---
>>
>> Changes since v1:
>>  - Forgot to enable ptn3460 eDP/LVDS bridge config option
>>    which is used for some boards (e.g: Exynos5250 Snow).
>>
>>  arch/arm/configs/exynos_defconfig | 15 +++++++++++++++
>>  1 file changed, 15 insertions(+)
>>
>> diff --git a/arch/arm/configs/exynos_defconfig b/arch/arm/configs/exynos_defconfig
>> index 676c744..d6d1f7c 100644
>> --- a/arch/arm/configs/exynos_defconfig
>> +++ b/arch/arm/configs/exynos_defconfig
>> @@ -101,11 +101,26 @@ CONFIG_REGULATOR_S2MPA01=y
>>  CONFIG_REGULATOR_S2MPS11=y
>>  CONFIG_REGULATOR_S5M8767=y
>>  CONFIG_REGULATOR_TPS65090=y
>> +CONFIG_DRM=y
>> +CONFIG_DRM_BRIDGE=y
>> +CONFIG_DRM_PTN3460=y
>> +CONFIG_DRM_PS8622=y
>> +CONFIG_DRM_EXYNOS=y
>> +CONFIG_DRM_EXYNOS_FIMD=y
>> +CONFIG_DRM_EXYNOS_DP=y
>> +CONFIG_DRM_PANEL=y
>> +CONFIG_DRM_PANEL_SIMPLE=y
>>  CONFIG_FB=y
>>  CONFIG_FB_MODE_HELPERS=y
>>  CONFIG_FB_SIMPLE=y
>>  CONFIG_EXYNOS_VIDEO=y
>>  CONFIG_EXYNOS_MIPI_DSI=y
>> +CONFIG_BACKLIGHT_LCD_SUPPORT=y
>> +CONFIG_LCD_CLASS_DEVICE=y
>> +CONFIG_LCD_PLATFORM=y
>> +CONFIG_BACKLIGHT_CLASS_DEVICE=y
>> +CONFIG_BACKLIGHT_GENERIC=y
>> +CONFIG_BACKLIGHT_PWM=y
>>  CONFIG_FRAMEBUFFER_CONSOLE=y
>>  CONFIG_FONTS=y
>>  CONFIG_FONT_7x14=y
> 


-- 
SUSE LINUX Products GmbH, Maxfeldstr. 5, 90409 Nürnberg, Germany
GF: Jeff Hawn, Jennifer Guild, Felix Imendörffer; HRB 16746 AG Nürnberg

WARNING: multiple messages have this Message-ID (diff)
From: afaerber@suse.de (Andreas Färber)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 1/1] ARM: exynos_defconfig: Enable options for display panel support
Date: Mon, 25 Aug 2014 13:49:56 +0200	[thread overview]
Message-ID: <53FB22E4.8040906@suse.de> (raw)
In-Reply-To: <5825205.70RuHaSG5p@amdc1032>

Hi,

Am 25.08.2014 13:43, schrieb Bartlomiej Zolnierkiewicz:
> On Monday, August 25, 2014 10:45:36 AM Javier Martinez Canillas wrote:
>> Many Exynos devices have a display panel. Most of them just have
>> a simple panel while others have more complex configurations that
>> requires an embedded DisplayPort (eDP) to LVDS bridges.
>>
>> This patch enables the following features to be built in the kernel
>> image to suport both setups:
>>
>> - Direct Rendering Manager (DRM)
>> - DRM bridge registration and lookup framework
>> - Parade ps8622/ps8625 eDP/LVDS bridge
>> - NXP ptn3460 eDP/LVDS bridge
>> - Exynos Fully Interactive Mobile Display controller (FIMD)
>> - Panel registration and lookup framework
>> - Simple panels
>> - Backlight & LCD device support
>>
>> Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
>> Tested-by: Kevin Hilman <khilman@linaro.org>
> 
> Could you please also do corresponding update to multi_v7_defconfig?

As was mentioned in v1 (but now below), some of these options depend on
patches yet to be respun and be accepted into drm, so I would consider
this an RFC patch and suggest to wait with multi_v7.

It could of course be split, as CONFIG_DRM_EXYNOS* and backlight parts
are certainly okay.

Regards,
Andreas

> 
> Best regards,
> --
> Bartlomiej Zolnierkiewicz
> Samsung R&D Institute Poland
> Samsung Electronics
> 
>> ---
>>
>> Changes since v1:
>>  - Forgot to enable ptn3460 eDP/LVDS bridge config option
>>    which is used for some boards (e.g: Exynos5250 Snow).
>>
>>  arch/arm/configs/exynos_defconfig | 15 +++++++++++++++
>>  1 file changed, 15 insertions(+)
>>
>> diff --git a/arch/arm/configs/exynos_defconfig b/arch/arm/configs/exynos_defconfig
>> index 676c744..d6d1f7c 100644
>> --- a/arch/arm/configs/exynos_defconfig
>> +++ b/arch/arm/configs/exynos_defconfig
>> @@ -101,11 +101,26 @@ CONFIG_REGULATOR_S2MPA01=y
>>  CONFIG_REGULATOR_S2MPS11=y
>>  CONFIG_REGULATOR_S5M8767=y
>>  CONFIG_REGULATOR_TPS65090=y
>> +CONFIG_DRM=y
>> +CONFIG_DRM_BRIDGE=y
>> +CONFIG_DRM_PTN3460=y
>> +CONFIG_DRM_PS8622=y
>> +CONFIG_DRM_EXYNOS=y
>> +CONFIG_DRM_EXYNOS_FIMD=y
>> +CONFIG_DRM_EXYNOS_DP=y
>> +CONFIG_DRM_PANEL=y
>> +CONFIG_DRM_PANEL_SIMPLE=y
>>  CONFIG_FB=y
>>  CONFIG_FB_MODE_HELPERS=y
>>  CONFIG_FB_SIMPLE=y
>>  CONFIG_EXYNOS_VIDEO=y
>>  CONFIG_EXYNOS_MIPI_DSI=y
>> +CONFIG_BACKLIGHT_LCD_SUPPORT=y
>> +CONFIG_LCD_CLASS_DEVICE=y
>> +CONFIG_LCD_PLATFORM=y
>> +CONFIG_BACKLIGHT_CLASS_DEVICE=y
>> +CONFIG_BACKLIGHT_GENERIC=y
>> +CONFIG_BACKLIGHT_PWM=y
>>  CONFIG_FRAMEBUFFER_CONSOLE=y
>>  CONFIG_FONTS=y
>>  CONFIG_FONT_7x14=y
> 


-- 
SUSE LINUX Products GmbH, Maxfeldstr. 5, 90409 N?rnberg, Germany
GF: Jeff Hawn, Jennifer Guild, Felix Imend?rffer; HRB 16746 AG N?rnberg

  parent reply	other threads:[~2014-08-25 11:49 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-08-25  8:45 [PATCH v2 1/1] ARM: exynos_defconfig: Enable options for display panel support Javier Martinez Canillas
2014-08-25  8:45 ` Javier Martinez Canillas
2014-08-25 11:43 ` Bartlomiej Zolnierkiewicz
2014-08-25 11:43   ` Bartlomiej Zolnierkiewicz
2014-08-25 11:49   ` Javier Martinez Canillas
2014-08-25 11:49     ` Javier Martinez Canillas
2014-08-25 11:49   ` Andreas Färber [this message]
2014-08-25 11:49     ` Andreas Färber
2014-08-25 11:54     ` Javier Martinez Canillas
2014-08-25 11:54       ` Javier Martinez Canillas
2014-10-31 23:42 ` Javier Martinez Canillas
2014-10-31 23:42   ` Javier Martinez Canillas
2014-11-08  9:46   ` Kukjin Kim
2014-11-08  9:46     ` Kukjin Kim

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=53FB22E4.8040906@suse.de \
    --to=afaerber@suse.de \
    --cc=ajaykumar.rs@samsung.com \
    --cc=b.zolnierkie@samsung.com \
    --cc=dianders@chromium.org \
    --cc=javier.martinez@collabora.co.uk \
    --cc=kgene.kim@samsung.com \
    --cc=khilman@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-samsung-soc@vger.kernel.org \
    --cc=olof@lixom.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.