*-dbg package...

*-dbg package...

[info]

[-- Attachment #1: Type: text/plain, Size: 3752 bytes --]

Hi, 
I’m trying to write ( and to use ) a recipe which should build a simple  .rpm,  which contains the /usr/lib/libaffinity.so and a  few header files within /usr/include/affinity/* subdir.

However, it looks like bitbake is trying / “forcing” me to  build a ${PN}-dbg package….:

I’m doing the following steps:

1. recipe:
“
…
inherit  cmake pkgconfig

PACKAGES = "${PN}"
FILES_${PN} = "${libdir}/libaffinity.so /usr/include/affinity/*”   
…
“
So, I assume  I’ m asking to build only 1 package.

2. During the bitbake processing, as the compilation, build,  and installation are over, the  files are copied into the ${D} directory, as expected:
“
michael@localhost image]$ pwd 
/home/michael/Devlab/poky/build-atmel/tmp/work/cortexa5t2hf-vfp-poky-linux-gnueabi/affinityng/0.1-r0/image
[michael@localhost image]$ cd usr
[michael@localhost usr]$ ls -la
total 16
drwxr-xr-x. 4 michael michael 4096 Aug 21 19:57 .
drwxr-xr-x. 3 michael michael 4096 Aug 21 19:57 ..
drwxr-xr-x. 3 michael michael 4096 Aug 21 19:57 include
drwxr-xr-x. 2 michael michael 4096 Aug 21 19:57 lib
“
So far, everything as expected in accordance with the Yocto reference. 

3. According to the manual reference  - "The do_package and do_packagedata tasks combine to analyze the files found in the D <http://www.yoctoproject.org/docs/current/ref-manual/ref-manual.html#var-D> directory…”,  I would expect that the package would be build.
However, the  attempt to build is failing. with the error:
“…
ERROR: QA Issue: affinityng: Files/directories were installed but not shipped
  /usr/src
  /usr/lib/.debug
  /usr/lib/.debug/libaffinity.so
  /usr/src/debug
  /usr/src/debug/affinityng
  /usr/src/debug/affinityng/0.1-r0
  /usr/src/debug/affinityng/0.1-r0/kernel
…
“

4. Following the reference, I checked the PKGD directory, where the files should be before split….
And I noticed that there is the src directory there,  in addition to  directories — include and lib — the only ones I was expecting to see there.
( see log below ) .

“
/home/michael/Devlab/poky/build-atmel/tmp/work/cortexa5t2hf-vfp-poky-linux-gnueabi/affinityng/0.1-r0/package/usr
….
[michael@localhost usr]$ ls -la
total 20
drwxr-xr-x. 5 michael michael 4096 Aug 21 19:57 .
drwxr-xr-x. 3 michael michael 4096 Aug 21 19:57 ..
drwxr-xr-x. 3 michael michael 4096 Aug 21 19:57 include
drwxr-xr-x. 3 michael michael 4096 Aug 21 19:57 lib
drwxr-xr-x. 3 michael michael 4096 Aug 21 19:57 src
[michael@localhost usr]$ pwd 
/home/michael/Devlab/poky/build-atmel/tmp/work/cortexa5t2hf-vfp-poky-linux-gnueabi/affinityng/0.1-r0/package/usr
[michael@localhost usr]$ cd src
[michael@localhost src]$ ls -la
total 12
drwxr-xr-x. 3 michael michael 4096 Aug 21 19:57 .
drwxr-xr-x. 5 michael michael 4096 Aug 21 19:57 ..
drwxr-xr-x. 3 michael michael 4096 Aug 21 19:57 debug
[michael@localhost src]$ 
“
5. It looks like that as result of package split, the  include & lib directories are used properly to build affinityng package, at least it is shown in packages-split properly.
But then ,  the content of the src directory is causing the problem with QA.

6. At the same time, if I ask to build  ${PN}-dbg package in addition - both packages are build, no QA complains, and all src/debug/* are going into the -dbg package… 

I wonder,
- why does the src directory appear within  PKGD/usr? ( If there is no such directory within the ${D} directory...)
- where is the definition for  -dbg package is coming from, and is it possible to disable it? 

May be somebody have the answer or suggestion what to check next….  

Thanks for a kind attention to the matter. 

Have a great day,
Michael.


[-- Attachment #2: Type: text/html, Size: 7083 bytes --]

Re: *-dbg package...

[Mark Hatle]

First this is the wrong list.  The question should have gone to oe-core devel, 
or openembedded-devel lists.  (I have CC'd the first)

On 8/21/14, 9:59 PM, info@sd-kyber.com wrote:
> Hi,
> I’m trying to write ( and to use ) a recipe which should build a simple  .rpm,
>   which contains the /usr/lib/libaffinity.so and a  few header files within
> /usr/include/affinity/* subdir.
>
> However, it looks like bitbake is trying / “forcing” me to  build a ${PN}-dbg
> package….:
>
> I’m doing the following steps:
>
> 1. recipe:
> “
> …
> inherit  cmake pkgconfig
>
> PACKAGES = "${PN}"
> FILES_${PN} = "${libdir}/libaffinity.so /usr/include/affinity/*”
> …
> “

Just removing '${PN}-dbg' does not inform the system that you do not want debug 
information to be generated.  There is a set of standard routines, performed 
after do_install, that will generate the debug information unless disabled.

To disable the routines you set:

INHIBIT_PACKAGE_DEBUG_SPLIT = '1'
INHIBIT_PACKAGE_STRIP = '1'

There are two settings they can be used separately, but in your case you likely 
want both.

INHIBIT_PACKAGE_DEBUG_SPLIT = '1' disables the files in your package from being 
split into run-time and debug components.

INHIBIT_PACKAGE_STRIP = '1' disabled the system from attempting to strip the 
run-time components of debug information.

--Mark

> So, I assume  I’ m asking to build only 1 package.
>
> 2. During the bitbake processing, as the compilation, build,  and installation
> are over, the  files are copied into the ${D} directory, as expected:
> “
> michael@localhost image]$ pwd
> /home/michael/Devlab/poky/build-atmel/tmp/work/cortexa5t2hf-vfp-poky-linux-gnueabi/affinityng/0.1-r0/image
> [michael@localhost image]$ cd usr
> [michael@localhost usr]$ ls -la
> total 16
> drwxr-xr-x. 4 michael michael 4096 Aug 21 19:57 .
> drwxr-xr-x. 3 michael michael 4096 Aug 21 19:57 ..
> drwxr-xr-x. 3 michael michael 4096 Aug 21 19:57 include
> drwxr-xr-x. 2 michael michael 4096 Aug 21 19:57 lib
> “
> So far, everything as expected in accordance with the Yocto reference.
>
> 3. According to the manual reference  - "The |do_package| and
> |do_packagedata| tasks combine to analyze the files found in the |D|
> <http://www.yoctoproject.org/docs/current/ref-manual/ref-manual.html#var-D> directory…”,
>   I would expect that the package would be build.
> However, the  attempt to build is failing. with the error:
> “…
> ERROR: QA Issue: affinityng: Files/directories were installed but not shipped
>    /usr/src
>    /usr/lib/.debug
>    /usr/lib/.debug/libaffinity.so
>    /usr/src/debug
>    /usr/src/debug/affinityng
>    /usr/src/debug/affinityng/0.1-r0
>    /usr/src/debug/affinityng/0.1-r0/kernel
> …
> “
>
> 4. Following the reference, I checked the PKGD directory, where the files should
> be before split….
> And I noticed that there is the src directory there,  in addition to
>   directories — include and lib — the only ones I was expecting to see there.
> ( see log below ) .
>
> “
> /home/michael/Devlab/poky/build-atmel/tmp/work/cortexa5t2hf-vfp-poky-linux-gnueabi/affinityng/0.1-r0/package/usr
> ….
> [michael@localhost usr]$ ls -la
> total 20
> drwxr-xr-x. 5 michael michael 4096 Aug 21 19:57 .
> drwxr-xr-x. 3 michael michael 4096 Aug 21 19:57 ..
> drwxr-xr-x. 3 michael michael 4096 Aug 21 19:57 include
> drwxr-xr-x. 3 michael michael 4096 Aug 21 19:57 lib
> drwxr-xr-x. 3 michael michael 4096 Aug 21 19:57 src
> [michael@localhost usr]$ pwd
> /home/michael/Devlab/poky/build-atmel/tmp/work/cortexa5t2hf-vfp-poky-linux-gnueabi/affinityng/0.1-r0/package/usr
> [michael@localhost usr]$ cd src
> [michael@localhost src]$ ls -la
> total 12
> drwxr-xr-x. 3 michael michael 4096 Aug 21 19:57 .
> drwxr-xr-x. 5 michael michael 4096 Aug 21 19:57 ..
> drwxr-xr-x. 3 michael michael 4096 Aug 21 19:57 debug
> [michael@localhost src]$
> “
> 5. It looks like that as result of package split, the  include & lib directories
> are used properly to build affinityng package, at least it is shown in
> packages-split properly.
> But then ,  the content of the src directory is causing the problem with QA.
>
> 6. At the same time, if I ask to build  ${PN}-dbg package in addition - both
> packages are build, no QA complains, and all src/debug/* are going into the -dbg
> package…
>
> I wonder,
> - why does the src directory appear within  PKGD/usr? ( If there is no such
> directory within the ${D} directory...)
> - where is the definition for  -dbg package is coming from, and is it possible
> to disable it?
>
> May be somebody have the answer or suggestion what to check next….
>
> Thanks for a kind attention to the matter.
>
> Have a great day,
> Michael.
>
>
>

Re: [bitbake-devel] *-dbg package...

[Mark Hatle]

First this is the wrong list.  The question should have gone to oe-core devel, 
or openembedded-devel lists.  (I have CC'd the first)

On 8/21/14, 9:59 PM, info@sd-kyber.com wrote:
> Hi,
> I’m trying to write ( and to use ) a recipe which should build a simple  .rpm,
>   which contains the /usr/lib/libaffinity.so and a  few header files within
> /usr/include/affinity/* subdir.
>
> However, it looks like bitbake is trying / “forcing” me to  build a ${PN}-dbg
> package….:
>
> I’m doing the following steps:
>
> 1. recipe:
> “
> …
> inherit  cmake pkgconfig
>
> PACKAGES = "${PN}"
> FILES_${PN} = "${libdir}/libaffinity.so /usr/include/affinity/*”
> …
> “

Just removing '${PN}-dbg' does not inform the system that you do not want debug 
information to be generated.  There is a set of standard routines, performed 
after do_install, that will generate the debug information unless disabled.

To disable the routines you set:

INHIBIT_PACKAGE_DEBUG_SPLIT = '1'
INHIBIT_PACKAGE_STRIP = '1'

There are two settings they can be used separately, but in your case you likely 
want both.

INHIBIT_PACKAGE_DEBUG_SPLIT = '1' disables the files in your package from being 
split into run-time and debug components.

INHIBIT_PACKAGE_STRIP = '1' disabled the system from attempting to strip the 
run-time components of debug information.

--Mark

> So, I assume  I’ m asking to build only 1 package.
>
> 2. During the bitbake processing, as the compilation, build,  and installation
> are over, the  files are copied into the ${D} directory, as expected:
> “
> michael@localhost image]$ pwd
> /home/michael/Devlab/poky/build-atmel/tmp/work/cortexa5t2hf-vfp-poky-linux-gnueabi/affinityng/0.1-r0/image
> [michael@localhost image]$ cd usr
> [michael@localhost usr]$ ls -la
> total 16
> drwxr-xr-x. 4 michael michael 4096 Aug 21 19:57 .
> drwxr-xr-x. 3 michael michael 4096 Aug 21 19:57 ..
> drwxr-xr-x. 3 michael michael 4096 Aug 21 19:57 include
> drwxr-xr-x. 2 michael michael 4096 Aug 21 19:57 lib
> “
> So far, everything as expected in accordance with the Yocto reference.
>
> 3. According to the manual reference  - "The |do_package| and
> |do_packagedata| tasks combine to analyze the files found in the |D|
> <http://www.yoctoproject.org/docs/current/ref-manual/ref-manual.html#var-D> directory…”,
>   I would expect that the package would be build.
> However, the  attempt to build is failing. with the error:
> “…
> ERROR: QA Issue: affinityng: Files/directories were installed but not shipped
>    /usr/src
>    /usr/lib/.debug
>    /usr/lib/.debug/libaffinity.so
>    /usr/src/debug
>    /usr/src/debug/affinityng
>    /usr/src/debug/affinityng/0.1-r0
>    /usr/src/debug/affinityng/0.1-r0/kernel
> …
> “
>
> 4. Following the reference, I checked the PKGD directory, where the files should
> be before split….
> And I noticed that there is the src directory there,  in addition to
>   directories — include and lib — the only ones I was expecting to see there.
> ( see log below ) .
>
> “
> /home/michael/Devlab/poky/build-atmel/tmp/work/cortexa5t2hf-vfp-poky-linux-gnueabi/affinityng/0.1-r0/package/usr
> ….
> [michael@localhost usr]$ ls -la
> total 20
> drwxr-xr-x. 5 michael michael 4096 Aug 21 19:57 .
> drwxr-xr-x. 3 michael michael 4096 Aug 21 19:57 ..
> drwxr-xr-x. 3 michael michael 4096 Aug 21 19:57 include
> drwxr-xr-x. 3 michael michael 4096 Aug 21 19:57 lib
> drwxr-xr-x. 3 michael michael 4096 Aug 21 19:57 src
> [michael@localhost usr]$ pwd
> /home/michael/Devlab/poky/build-atmel/tmp/work/cortexa5t2hf-vfp-poky-linux-gnueabi/affinityng/0.1-r0/package/usr
> [michael@localhost usr]$ cd src
> [michael@localhost src]$ ls -la
> total 12
> drwxr-xr-x. 3 michael michael 4096 Aug 21 19:57 .
> drwxr-xr-x. 5 michael michael 4096 Aug 21 19:57 ..
> drwxr-xr-x. 3 michael michael 4096 Aug 21 19:57 debug
> [michael@localhost src]$
> “
> 5. It looks like that as result of package split, the  include & lib directories
> are used properly to build affinityng package, at least it is shown in
> packages-split properly.
> But then ,  the content of the src directory is causing the problem with QA.
>
> 6. At the same time, if I ask to build  ${PN}-dbg package in addition - both
> packages are build, no QA complains, and all src/debug/* are going into the -dbg
> package…
>
> I wonder,
> - why does the src directory appear within  PKGD/usr? ( If there is no such
> directory within the ${D} directory...)
> - where is the definition for  -dbg package is coming from, and is it possible
> to disable it?
>
> May be somebody have the answer or suggestion what to check next….
>
> Thanks for a kind attention to the matter.
>
> Have a great day,
> Michael.
>
>
>

Re: *-dbg package...

[Khem Raj]

On 14-08-25 10:24:57, Mark Hatle wrote:
> First this is the wrong list.  The question should have gone to oe-core
> devel, or openembedded-devel lists.  (I have CC'd the first)
> 
> On 8/21/14, 9:59 PM, info@sd-kyber.com wrote:
> >Hi,
> >I’m trying to write ( and to use ) a recipe which should build a simple  .rpm,
> >  which contains the /usr/lib/libaffinity.so and a  few header files within
> >/usr/include/affinity/* subdir.

if you install it right then you should get one rpm with library another
one ${PN}-dev which should contain the headers and all debug info will
be split out into a rpm of its own ${PN}-dbg, this is standard
packaging strategy in OE.


> >
> >However, it looks like bitbake is trying / “forcing” me to  build a ${PN}-dbg
> >package….:

Yes it will, is there any issue with that ?


> >
> >I’m doing the following steps:
> >
> >1. recipe:
> >“
> >…
> >inherit  cmake pkgconfig
> >
> >PACKAGES = "${PN}"

overriding PACKAGES will leave some unpackaged files.

> >FILES_${PN} = "${libdir}/libaffinity.so /usr/include/affinity/*”
> >…

I would suggest to use standard packaging split if thats not a big
issue.

> >“
> 
> Just removing '${PN}-dbg' does not inform the system that you do not want
> debug information to be generated.  There is a set of standard routines,
> performed after do_install, that will generate the debug information unless
> disabled.
> 
> To disable the routines you set:
> 
> INHIBIT_PACKAGE_DEBUG_SPLIT = '1'
> INHIBIT_PACKAGE_STRIP = '1'
> 
> There are two settings they can be used separately, but in your case you
> likely want both.
> 
> INHIBIT_PACKAGE_DEBUG_SPLIT = '1' disables the files in your package from
> being split into run-time and debug components.
> 
> INHIBIT_PACKAGE_STRIP = '1' disabled the system from attempting to strip the
> run-time components of debug information.
> 
> --Mark
> 
> >So, I assume  I’ m asking to build only 1 package.
> >
> >2. During the bitbake processing, as the compilation, build,  and installation
> >are over, the  files are copied into the ${D} directory, as expected:
> >“
> >michael@localhost image]$ pwd
> >/home/michael/Devlab/poky/build-atmel/tmp/work/cortexa5t2hf-vfp-poky-linux-gnueabi/affinityng/0.1-r0/image
> >[michael@localhost image]$ cd usr
> >[michael@localhost usr]$ ls -la
> >total 16
> >drwxr-xr-x. 4 michael michael 4096 Aug 21 19:57 .
> >drwxr-xr-x. 3 michael michael 4096 Aug 21 19:57 ..
> >drwxr-xr-x. 3 michael michael 4096 Aug 21 19:57 include
> >drwxr-xr-x. 2 michael michael 4096 Aug 21 19:57 lib
> >“
> >So far, everything as expected in accordance with the Yocto reference.
> >
> >3. According to the manual reference  - "The |do_package| and
> >|do_packagedata| tasks combine to analyze the files found in the |D|
> ><http://www.yoctoproject.org/docs/current/ref-manual/ref-manual.html#var-D> directory…”,
> >  I would expect that the package would be build.
> >However, the  attempt to build is failing. with the error:
> >“…
> >ERROR: QA Issue: affinityng: Files/directories were installed but not shipped
> >   /usr/src
> >   /usr/lib/.debug
> >   /usr/lib/.debug/libaffinity.so
> >   /usr/src/debug
> >   /usr/src/debug/affinityng
> >   /usr/src/debug/affinityng/0.1-r0
> >   /usr/src/debug/affinityng/0.1-r0/kernel
> >…
> >“
> >
> >4. Following the reference, I checked the PKGD directory, where the files should
> >be before split….
> >And I noticed that there is the src directory there,  in addition to
> >  directories — include and lib — the only ones I was expecting to see there.
> >( see log below ) .
> >
> >“
> >/home/michael/Devlab/poky/build-atmel/tmp/work/cortexa5t2hf-vfp-poky-linux-gnueabi/affinityng/0.1-r0/package/usr
> >….
> >[michael@localhost usr]$ ls -la
> >total 20
> >drwxr-xr-x. 5 michael michael 4096 Aug 21 19:57 .
> >drwxr-xr-x. 3 michael michael 4096 Aug 21 19:57 ..
> >drwxr-xr-x. 3 michael michael 4096 Aug 21 19:57 include
> >drwxr-xr-x. 3 michael michael 4096 Aug 21 19:57 lib
> >drwxr-xr-x. 3 michael michael 4096 Aug 21 19:57 src
> >[michael@localhost usr]$ pwd
> >/home/michael/Devlab/poky/build-atmel/tmp/work/cortexa5t2hf-vfp-poky-linux-gnueabi/affinityng/0.1-r0/package/usr
> >[michael@localhost usr]$ cd src
> >[michael@localhost src]$ ls -la
> >total 12
> >drwxr-xr-x. 3 michael michael 4096 Aug 21 19:57 .
> >drwxr-xr-x. 5 michael michael 4096 Aug 21 19:57 ..
> >drwxr-xr-x. 3 michael michael 4096 Aug 21 19:57 debug
> >[michael@localhost src]$
> >“
> >5. It looks like that as result of package split, the  include & lib directories
> >are used properly to build affinityng package, at least it is shown in
> >packages-split properly.
> >But then ,  the content of the src directory is causing the problem with QA.
> >
> >6. At the same time, if I ask to build  ${PN}-dbg package in addition - both
> >packages are build, no QA complains, and all src/debug/* are going into the -dbg
> >package…
> >
> >I wonder,
> >- why does the src directory appear within  PKGD/usr? ( If there is no such
> >directory within the ${D} directory...)
> >- where is the definition for  -dbg package is coming from, and is it possible
> >to disable it?
> >
> >May be somebody have the answer or suggestion what to check next….
> >
> >Thanks for a kind attention to the matter.
> >
> >Have a great day,
> >Michael.
> >
> >
> >
> 
> -- 
> _______________________________________________
> bitbake-devel mailing list
> bitbake-devel@lists.openembedded.org
> http://lists.openembedded.org/mailman/listinfo/bitbake-devel

Re: [bitbake-devel] *-dbg package...

[Khem Raj]

On 14-08-25 10:24:57, Mark Hatle wrote:
> First this is the wrong list.  The question should have gone to oe-core
> devel, or openembedded-devel lists.  (I have CC'd the first)
> 
> On 8/21/14, 9:59 PM, info@sd-kyber.com wrote:
> >Hi,
> >I’m trying to write ( and to use ) a recipe which should build a simple  .rpm,
> >  which contains the /usr/lib/libaffinity.so and a  few header files within
> >/usr/include/affinity/* subdir.

if you install it right then you should get one rpm with library another
one ${PN}-dev which should contain the headers and all debug info will
be split out into a rpm of its own ${PN}-dbg, this is standard
packaging strategy in OE.


> >
> >However, it looks like bitbake is trying / “forcing” me to  build a ${PN}-dbg
> >package….:

Yes it will, is there any issue with that ?


> >
> >I’m doing the following steps:
> >
> >1. recipe:
> >“
> >…
> >inherit  cmake pkgconfig
> >
> >PACKAGES = "${PN}"

overriding PACKAGES will leave some unpackaged files.

> >FILES_${PN} = "${libdir}/libaffinity.so /usr/include/affinity/*”
> >…

I would suggest to use standard packaging split if thats not a big
issue.

> >“
> 
> Just removing '${PN}-dbg' does not inform the system that you do not want
> debug information to be generated.  There is a set of standard routines,
> performed after do_install, that will generate the debug information unless
> disabled.
> 
> To disable the routines you set:
> 
> INHIBIT_PACKAGE_DEBUG_SPLIT = '1'
> INHIBIT_PACKAGE_STRIP = '1'
> 
> There are two settings they can be used separately, but in your case you
> likely want both.
> 
> INHIBIT_PACKAGE_DEBUG_SPLIT = '1' disables the files in your package from
> being split into run-time and debug components.
> 
> INHIBIT_PACKAGE_STRIP = '1' disabled the system from attempting to strip the
> run-time components of debug information.
> 
> --Mark
> 
> >So, I assume  I’ m asking to build only 1 package.
> >
> >2. During the bitbake processing, as the compilation, build,  and installation
> >are over, the  files are copied into the ${D} directory, as expected:
> >“
> >michael@localhost image]$ pwd
> >/home/michael/Devlab/poky/build-atmel/tmp/work/cortexa5t2hf-vfp-poky-linux-gnueabi/affinityng/0.1-r0/image
> >[michael@localhost image]$ cd usr
> >[michael@localhost usr]$ ls -la
> >total 16
> >drwxr-xr-x. 4 michael michael 4096 Aug 21 19:57 .
> >drwxr-xr-x. 3 michael michael 4096 Aug 21 19:57 ..
> >drwxr-xr-x. 3 michael michael 4096 Aug 21 19:57 include
> >drwxr-xr-x. 2 michael michael 4096 Aug 21 19:57 lib
> >“
> >So far, everything as expected in accordance with the Yocto reference.
> >
> >3. According to the manual reference  - "The |do_package| and
> >|do_packagedata| tasks combine to analyze the files found in the |D|
> ><http://www.yoctoproject.org/docs/current/ref-manual/ref-manual.html#var-D> directory…”,
> >  I would expect that the package would be build.
> >However, the  attempt to build is failing. with the error:
> >“…
> >ERROR: QA Issue: affinityng: Files/directories were installed but not shipped
> >   /usr/src
> >   /usr/lib/.debug
> >   /usr/lib/.debug/libaffinity.so
> >   /usr/src/debug
> >   /usr/src/debug/affinityng
> >   /usr/src/debug/affinityng/0.1-r0
> >   /usr/src/debug/affinityng/0.1-r0/kernel
> >…
> >“
> >
> >4. Following the reference, I checked the PKGD directory, where the files should
> >be before split….
> >And I noticed that there is the src directory there,  in addition to
> >  directories — include and lib — the only ones I was expecting to see there.
> >( see log below ) .
> >
> >“
> >/home/michael/Devlab/poky/build-atmel/tmp/work/cortexa5t2hf-vfp-poky-linux-gnueabi/affinityng/0.1-r0/package/usr
> >….
> >[michael@localhost usr]$ ls -la
> >total 20
> >drwxr-xr-x. 5 michael michael 4096 Aug 21 19:57 .
> >drwxr-xr-x. 3 michael michael 4096 Aug 21 19:57 ..
> >drwxr-xr-x. 3 michael michael 4096 Aug 21 19:57 include
> >drwxr-xr-x. 3 michael michael 4096 Aug 21 19:57 lib
> >drwxr-xr-x. 3 michael michael 4096 Aug 21 19:57 src
> >[michael@localhost usr]$ pwd
> >/home/michael/Devlab/poky/build-atmel/tmp/work/cortexa5t2hf-vfp-poky-linux-gnueabi/affinityng/0.1-r0/package/usr
> >[michael@localhost usr]$ cd src
> >[michael@localhost src]$ ls -la
> >total 12
> >drwxr-xr-x. 3 michael michael 4096 Aug 21 19:57 .
> >drwxr-xr-x. 5 michael michael 4096 Aug 21 19:57 ..
> >drwxr-xr-x. 3 michael michael 4096 Aug 21 19:57 debug
> >[michael@localhost src]$
> >“
> >5. It looks like that as result of package split, the  include & lib directories
> >are used properly to build affinityng package, at least it is shown in
> >packages-split properly.
> >But then ,  the content of the src directory is causing the problem with QA.
> >
> >6. At the same time, if I ask to build  ${PN}-dbg package in addition - both
> >packages are build, no QA complains, and all src/debug/* are going into the -dbg
> >package…
> >
> >I wonder,
> >- why does the src directory appear within  PKGD/usr? ( If there is no such
> >directory within the ${D} directory...)
> >- where is the definition for  -dbg package is coming from, and is it possible
> >to disable it?
> >
> >May be somebody have the answer or suggestion what to check next….
> >
> >Thanks for a kind attention to the matter.
> >
> >Have a great day,
> >Michael.
> >
> >
> >
> 
> -- 
> _______________________________________________
> bitbake-devel mailing list
> bitbake-devel@lists.openembedded.org
> http://lists.openembedded.org/mailman/listinfo/bitbake-devel

Re: [bitbake-devel] *-dbg package...

[info]

[-- Attachment #1: Type: text/plain, Size: 7151 bytes --]

Thank you very much for the detailed answer(s) and comments.

My next question would be for some advice where to find more information on topics like

- default splitting policy (settings) 
- flags as INHIBIT_PACKAGE_DEBUG_SPLIT
-  etc…

May be there is some ‘obvious logic’ in files splits, etc. which would make reading the code easily….

So far, I tried to read the manuals, Yocto book… It looks like those papers are covering well the general ideas and strategies. 
But as they say - ‘ the devil is in details’,   
And so far, I have hard time to find info on such details… 

Once again, thanks for the kind attention to this matter. 
And my apology that I put the original message within the wrong list. 

Michael.



> On Aug 25, 2014, at 11:46 AM, Khem Raj <raj.khem@gmail.com <mailto:raj.khem@gmail.com>> wrote:
> 
> On 14-08-25 10:24:57, Mark Hatle wrote:
>> First this is the wrong list.  The question should have gone to oe-core
>> devel, or openembedded-devel lists.  (I have CC'd the first)
>> 
>> On 8/21/14, 9:59 PM, info@sd-kyber.com <mailto:info@sd-kyber.com> wrote:
>>> Hi,
>>> I’m trying to write ( and to use ) a recipe which should build a simple  .rpm,
>>> which contains the /usr/lib/libaffinity.so and a  few header files within
>>> /usr/include/affinity/* subdir.
> 
> if you install it right then you should get one rpm with library another
> one ${PN}-dev which should contain the headers and all debug info will
> be split out into a rpm of its own ${PN}-dbg, this is standard
> packaging strategy in OE.
> 
> 
>>> 
>>> However, it looks like bitbake is trying / “forcing” me to  build a ${PN}-dbg
>>> package….:
> 
> Yes it will, is there any issue with that ?
> 
> 
>>> 
>>> I’m doing the following steps:
>>> 
>>> 1. recipe:
>>> “
>>> …
>>> inherit  cmake pkgconfig
>>> 
>>> PACKAGES = "${PN}"
> 
> overriding PACKAGES will leave some unpackaged files.
> 
>>> FILES_${PN} = "${libdir}/libaffinity.so /usr/include/affinity/*”
>>> …
> 
> I would suggest to use standard packaging split if thats not a big
> issue.
> 
>>> “
>> 
>> Just removing '${PN}-dbg' does not inform the system that you do not want
>> debug information to be generated.  There is a set of standard routines,
>> performed after do_install, that will generate the debug information unless
>> disabled.
>> 
>> To disable the routines you set:
>> 
>> INHIBIT_PACKAGE_DEBUG_SPLIT = '1'
>> INHIBIT_PACKAGE_STRIP = '1'
>> 
>> There are two settings they can be used separately, but in your case you
>> likely want both.
>> 
>> INHIBIT_PACKAGE_DEBUG_SPLIT = '1' disables the files in your package from
>> being split into run-time and debug components.
>> 
>> INHIBIT_PACKAGE_STRIP = '1' disabled the system from attempting to strip the
>> run-time components of debug information.
>> 
>> --Mark
>> 
>>> So, I assume  I’ m asking to build only 1 package.
>>> 
>>> 2. During the bitbake processing, as the compilation, build,  and installation
>>> are over, the  files are copied into the ${D} directory, as expected:
>>> “
>>> michael@localhost image]$ pwd
>>> /home/michael/Devlab/poky/build-atmel/tmp/work/cortexa5t2hf-vfp-poky-linux-gnueabi/affinityng/0.1-r0/image
>>> [michael@localhost image]$ cd usr
>>> [michael@localhost usr]$ ls -la
>>> total 16
>>> drwxr-xr-x. 4 michael michael 4096 Aug 21 19:57 .
>>> drwxr-xr-x. 3 michael michael 4096 Aug 21 19:57 ..
>>> drwxr-xr-x. 3 michael michael 4096 Aug 21 19:57 include
>>> drwxr-xr-x. 2 michael michael 4096 Aug 21 19:57 lib
>>> “
>>> So far, everything as expected in accordance with the Yocto reference.
>>> 
>>> 3. According to the manual reference  - "The |do_package| and
>>> |do_packagedata| tasks combine to analyze the files found in the |D|
>>> <http://www.yoctoproject.org/docs/current/ref-manual/ref-manual.html#var-D <http://www.yoctoproject.org/docs/current/ref-manual/ref-manual.html#var-D>> directory…”,
>>> I would expect that the package would be build.
>>> However, the  attempt to build is failing. with the error:
>>> “…
>>> ERROR: QA Issue: affinityng: Files/directories were installed but not shipped
>>>  /usr/src
>>>  /usr/lib/.debug
>>>  /usr/lib/.debug/libaffinity.so
>>>  /usr/src/debug
>>>  /usr/src/debug/affinityng
>>>  /usr/src/debug/affinityng/0.1-r0
>>>  /usr/src/debug/affinityng/0.1-r0/kernel
>>> …
>>> “
>>> 
>>> 4. Following the reference, I checked the PKGD directory, where the files should
>>> be before split….
>>> And I noticed that there is the src directory there,  in addition to
>>> directories — include and lib — the only ones I was expecting to see there.
>>> ( see log below ) .
>>> 
>>> “
>>> /home/michael/Devlab/poky/build-atmel/tmp/work/cortexa5t2hf-vfp-poky-linux-gnueabi/affinityng/0.1-r0/package/usr
>>> ….
>>> [michael@localhost usr]$ ls -la
>>> total 20
>>> drwxr-xr-x. 5 michael michael 4096 Aug 21 19:57 .
>>> drwxr-xr-x. 3 michael michael 4096 Aug 21 19:57 ..
>>> drwxr-xr-x. 3 michael michael 4096 Aug 21 19:57 include
>>> drwxr-xr-x. 3 michael michael 4096 Aug 21 19:57 lib
>>> drwxr-xr-x. 3 michael michael 4096 Aug 21 19:57 src
>>> [michael@localhost usr]$ pwd
>>> /home/michael/Devlab/poky/build-atmel/tmp/work/cortexa5t2hf-vfp-poky-linux-gnueabi/affinityng/0.1-r0/package/usr
>>> [michael@localhost usr]$ cd src
>>> [michael@localhost src]$ ls -la
>>> total 12
>>> drwxr-xr-x. 3 michael michael 4096 Aug 21 19:57 .
>>> drwxr-xr-x. 5 michael michael 4096 Aug 21 19:57 ..
>>> drwxr-xr-x. 3 michael michael 4096 Aug 21 19:57 debug
>>> [michael@localhost src]$
>>> “
>>> 5. It looks like that as result of package split, the  include & lib directories
>>> are used properly to build affinityng package, at least it is shown in
>>> packages-split properly.
>>> But then ,  the content of the src directory is causing the problem with QA.
>>> 
>>> 6. At the same time, if I ask to build  ${PN}-dbg package in addition - both
>>> packages are build, no QA complains, and all src/debug/* are going into the -dbg
>>> package…
>>> 
>>> I wonder,
>>> - why does the src directory appear within  PKGD/usr? ( If there is no such
>>> directory within the ${D} directory...)
>>> - where is the definition for  -dbg package is coming from, and is it possible
>>> to disable it?
>>> 
>>> May be somebody have the answer or suggestion what to check next….
>>> 
>>> Thanks for a kind attention to the matter.
>>> 
>>> Have a great day,
>>> Michael.
>>> 
>>> 
>>> 
>> 
>> -- 
>> _______________________________________________
>> bitbake-devel mailing list
>> bitbake-devel@lists.openembedded.org <mailto:bitbake-devel@lists.openembedded.org>
>> http://lists.openembedded.org/mailman/listinfo/bitbake-devel
> -- 
> _______________________________________________
> bitbake-devel mailing list
> bitbake-devel@lists.openembedded.org <mailto:bitbake-devel@lists.openembedded.org>
> http://lists.openembedded.org/mailman/listinfo/bitbake-devel <http://lists.openembedded.org/mailman/listinfo/bitbake-devel>

[-- Attachment #2: Type: text/html, Size: 24508 bytes --]

Re: [bitbake-devel] *-dbg package...

[Mark Hatle]

On 8/28/14, 8:27 PM, info@sd-kyber.com wrote:
> Thank you very much for the detailed answer(s) and comments.
>
> My next question would be for some advice where to find more information on
> topics like
>
> - default splitting policy (settings)
> - flags as INHIBIT_PACKAGE_DEBUG_SPLIT
> -  etc…

The best thing to do is ask questions on these topics, and then submit 
suggestions for the Yocto Project manual.

Much of this code predates the documentation, and is considered "advanced" 
topics.  We'd like to get them documented, but it's easy to forget various 
features exists.

> May be there is some ‘obvious logic’ in files splits, etc. which would make
> reading the code easily….
>
> So far, I tried to read the manuals, Yocto book… It looks like those papers are
> covering well the general ideas and strategies.
> But as they say - ‘ the devil is in details’,
> And so far, I have hard time to find info on such details…

Add a docs bug in the yocto project bugzilla, we want to start enhancing the 
manual with more advanced topics.

--Mark

> Once again, thanks for the kind attention to this matter.
> And my apology that I put the original message within the wrong list.
>
> Michael.
>
>
>
>> On Aug 25, 2014, at 11:46 AM, Khem Raj <raj.khem@gmail.com
>> <mailto:raj.khem@gmail.com>> wrote:
>>
>> On 14-08-25 10:24:57, Mark Hatle wrote:
>>> First this is the wrong list.  The question should have gone to oe-core
>>> devel, or openembedded-devel lists.  (I have CC'd the first)
>>>
>>> On 8/21/14, 9:59 PM,info@sd-kyber.com <mailto:info@sd-kyber.com>wrote:
>>>> Hi,
>>>> I’m trying to write ( and to use ) a recipe which should build a simple  .rpm,
>>>> which contains the /usr/lib/libaffinity.so and a  few header files within
>>>> /usr/include/affinity/* subdir.
>>
>> if you install it right then you should get one rpm with library another
>> one ${PN}-dev which should contain the headers and all debug info will
>> be split out into a rpm of its own ${PN}-dbg, this is standard
>> packaging strategy in OE.
>>
>>
>>>>
>>>> However, it looks like bitbake is trying / “forcing” me to  build a ${PN}-dbg
>>>> package….:
>>
>> Yes it will, is there any issue with that ?
>>
>>
>>>>
>>>> I’m doing the following steps:
>>>>
>>>> 1. recipe:
>>>> “
>>>> …
>>>> inherit  cmake pkgconfig
>>>>
>>>> PACKAGES = "${PN}"
>>
>> overriding PACKAGES will leave some unpackaged files.
>>
>>>> FILES_${PN} = "${libdir}/libaffinity.so /usr/include/affinity/*”
>>>> …
>>
>> I would suggest to use standard packaging split if thats not a big
>> issue.
>>
>>>> “
>>>
>>> Just removing '${PN}-dbg' does not inform the system that you do not want
>>> debug information to be generated.  There is a set of standard routines,
>>> performed after do_install, that will generate the debug information unless
>>> disabled.
>>>
>>> To disable the routines you set:
>>>
>>> INHIBIT_PACKAGE_DEBUG_SPLIT = '1'
>>> INHIBIT_PACKAGE_STRIP = '1'
>>>
>>> There are two settings they can be used separately, but in your case you
>>> likely want both.
>>>
>>> INHIBIT_PACKAGE_DEBUG_SPLIT = '1' disables the files in your package from
>>> being split into run-time and debug components.
>>>
>>> INHIBIT_PACKAGE_STRIP = '1' disabled the system from attempting to strip the
>>> run-time components of debug information.
>>>
>>> --Mark
>>>
>>>> So, I assume  I’ m asking to build only 1 package.
>>>>
>>>> 2. During the bitbake processing, as the compilation, build,  and installation
>>>> are over, the  files are copied into the ${D} directory, as expected:
>>>> “
>>>> michael@localhost image]$ pwd
>>>> /home/michael/Devlab/poky/build-atmel/tmp/work/cortexa5t2hf-vfp-poky-linux-gnueabi/affinityng/0.1-r0/image
>>>> [michael@localhost image]$ cd usr
>>>> [michael@localhost usr]$ ls -la
>>>> total 16
>>>> drwxr-xr-x. 4 michael michael 4096 Aug 21 19:57 .
>>>> drwxr-xr-x. 3 michael michael 4096 Aug 21 19:57 ..
>>>> drwxr-xr-x. 3 michael michael 4096 Aug 21 19:57 include
>>>> drwxr-xr-x. 2 michael michael 4096 Aug 21 19:57 lib
>>>> “
>>>> So far, everything as expected in accordance with the Yocto reference.
>>>>
>>>> 3. According to the manual reference  - "The |do_package| and
>>>> |do_packagedata| tasks combine to analyze the files found in the |D|
>>>> <http://www.yoctoproject.org/docs/current/ref-manual/ref-manual.html#var-D>
>>>> directory…”,
>>>> I would expect that the package would be build.
>>>> However, the  attempt to build is failing. with the error:
>>>> “…
>>>> ERROR: QA Issue: affinityng: Files/directories were installed but not shipped
>>>>  /usr/src
>>>>  /usr/lib/.debug
>>>>  /usr/lib/.debug/libaffinity.so
>>>>  /usr/src/debug
>>>>  /usr/src/debug/affinityng
>>>>  /usr/src/debug/affinityng/0.1-r0
>>>>  /usr/src/debug/affinityng/0.1-r0/kernel
>>>> …
>>>> “
>>>>
>>>> 4. Following the reference, I checked the PKGD directory, where the files should
>>>> be before split….
>>>> And I noticed that there is the src directory there,  in addition to
>>>> directories — include and lib — the only ones I was expecting to see there.
>>>> ( see log below ) .
>>>>
>>>> “
>>>> /home/michael/Devlab/poky/build-atmel/tmp/work/cortexa5t2hf-vfp-poky-linux-gnueabi/affinityng/0.1-r0/package/usr
>>>> ….
>>>> [michael@localhost usr]$ ls -la
>>>> total 20
>>>> drwxr-xr-x. 5 michael michael 4096 Aug 21 19:57 .
>>>> drwxr-xr-x. 3 michael michael 4096 Aug 21 19:57 ..
>>>> drwxr-xr-x. 3 michael michael 4096 Aug 21 19:57 include
>>>> drwxr-xr-x. 3 michael michael 4096 Aug 21 19:57 lib
>>>> drwxr-xr-x. 3 michael michael 4096 Aug 21 19:57 src
>>>> [michael@localhost usr]$ pwd
>>>> /home/michael/Devlab/poky/build-atmel/tmp/work/cortexa5t2hf-vfp-poky-linux-gnueabi/affinityng/0.1-r0/package/usr
>>>> [michael@localhost usr]$ cd src
>>>> [michael@localhost src]$ ls -la
>>>> total 12
>>>> drwxr-xr-x. 3 michael michael 4096 Aug 21 19:57 .
>>>> drwxr-xr-x. 5 michael michael 4096 Aug 21 19:57 ..
>>>> drwxr-xr-x. 3 michael michael 4096 Aug 21 19:57 debug
>>>> [michael@localhost src]$
>>>> “
>>>> 5. It looks like that as result of package split, the  include & lib directories
>>>> are used properly to build affinityng package, at least it is shown in
>>>> packages-split properly.
>>>> But then ,  the content of the src directory is causing the problem with QA.
>>>>
>>>> 6. At the same time, if I ask to build  ${PN}-dbg package in addition - both
>>>> packages are build, no QA complains, and all src/debug/* are going into the -dbg
>>>> package…
>>>>
>>>> I wonder,
>>>> - why does the src directory appear within  PKGD/usr? ( If there is no such
>>>> directory within the ${D} directory...)
>>>> - where is the definition for  -dbg package is coming from, and is it possible
>>>> to disable it?
>>>>
>>>> May be somebody have the answer or suggestion what to check next….
>>>>
>>>> Thanks for a kind attention to the matter.
>>>>
>>>> Have a great day,
>>>> Michael.
>>>>
>>>>
>>>>
>>>
>>> --
>>> _______________________________________________
>>> bitbake-devel mailing list
>>> bitbake-devel@lists.openembedded.org
>>> <mailto:bitbake-devel@lists.openembedded.org>
>>> http://lists.openembedded.org/mailman/listinfo/bitbake-devel
>> --
>> _______________________________________________
>> bitbake-devel mailing list
>> bitbake-devel@lists.openembedded.org <mailto:bitbake-devel@lists.openembedded.org>
>> http://lists.openembedded.org/mailman/listinfo/bitbake-devel
>