Re: [PATCH v5 5/5] clk: RK808: Add clkout driver for RK808

[Chris Zhong <zyw-TNX95d0MmH7DzftRWevZcw@public.gmane.org>]

On 08/26/2014 01:59 AM, Doug Anderson wrote:
> Chris,
>
> On Mon, Aug 25, 2014 at 6:39 AM, Chris Zhong <zyw-TNX95d0MmH7DzftRWevZcw@public.gmane.org> wrote:
>> Signed-off-by: Chris Zhong <zyw-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
>>
>> ---
>>
>> Changes in v5:
>> Advices by Mark Brown
>> - add description about regulator valid name.
>> - add a header file "rockchip,rk808".
>>
>> Changes in v4:
>> Advices by Doug
>> - add a "#clock-cells" propertiy
>> - update the example
>>
>> Changes in v3: None
>> Changes in v2: None
>>
>>   drivers/clk/Kconfig     |    9 +++
>>   drivers/clk/Makefile    |    1 +
>>   drivers/clk/clk-rk808.c |  164 +++++++++++++++++++++++++++++++++++++++++++++++
>>   3 files changed, 174 insertions(+)
>>   create mode 100644 drivers/clk/clk-rk808.c
>>
>> diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig
>> index cfd3af7..84e0590 100644
>> --- a/drivers/clk/Kconfig
>> +++ b/drivers/clk/Kconfig
>> @@ -38,6 +38,15 @@ config COMMON_CLK_MAX77686
>>          ---help---
>>            This driver supports Maxim 77686 crystal oscillator clock.
>>
>> +config COMMON_CLK_RK808
>> +       tristate "Clock driver for RK808"
>> +       depends on MFD_RK808
>> +       ---help---
>> +         This driver supports RK808 crystal oscillator clock. These
>> +         multi-function devices have two fixed-rate oscillators,
>> +         clocked at 32KHz each. Clkout1 is always on, Clkout2 can off
>> +         by control register.
>> +
>>   config COMMON_CLK_SI5351
>>          tristate "Clock driver for SiLabs 5351A/B/C"
>>          depends on I2C
>> diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
>> index f537a0b..99f53d5 100644
>> --- a/drivers/clk/Makefile
>> +++ b/drivers/clk/Makefile
>> @@ -28,6 +28,7 @@ obj-$(CONFIG_ARCH_NOMADIK)            += clk-nomadik.o
>>   obj-$(CONFIG_ARCH_NSPIRE)              += clk-nspire.o
>>   obj-$(CONFIG_COMMON_CLK_PALMAS)                += clk-palmas.o
>>   obj-$(CONFIG_CLK_PPC_CORENET)          += clk-ppc-corenet.o
>> +obj-$(CONFIG_COMMON_CLK_RK808)         += clk-rk808.o
>>   obj-$(CONFIG_COMMON_CLK_S2MPS11)       += clk-s2mps11.o
>>   obj-$(CONFIG_COMMON_CLK_SI5351)                += clk-si5351.o
>>   obj-$(CONFIG_COMMON_CLK_SI570)         += clk-si570.o
>> diff --git a/drivers/clk/clk-rk808.c b/drivers/clk/clk-rk808.c
>> new file mode 100644
>> index 0000000..a8f8d81
>> --- /dev/null
>> +++ b/drivers/clk/clk-rk808.c
>> @@ -0,0 +1,164 @@
>> +/*
>> + * Clkout driver for Rockchip RK808
>> + *
>> + * Copyright (c) 2014, Fuzhou Rockchip Electronics Co., Ltd
>> + *
>> + * Author: Chris Zhong <zyw-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
>> + * Author: Zhang Qing <zhangqing-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
>> + *
>> + * This program is free software; you can redistribute it and/or modify it
>> + * under the terms and conditions of the GNU General Public License,
>> + * version 2, as published by the Free Software Foundation.
>> + *
>> + * This program is distributed in the hope it will be useful, but WITHOUT
>> + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
>> + * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
>> + * more details.
>> + */
>> +
>> +#include <linux/clk.h>
>> +#include <linux/clk-provider.h>
>> +#include <linux/module.h>
>> +#include <linux/slab.h>
>> +#include <linux/platform_device.h>
>> +#include <linux/mfd/rk808.h>
>> +#include <linux/i2c.h>
>> +
>> +struct rk808_clkout {
>> +       struct rk808 *rk808;
>> +       struct clk_onecell_data clk_data;
>> +       struct clk_hw           clkout1_hw;
>> +       struct clk_hw           clkout2_hw;
>> +};
>> +
>> +static unsigned long rk808_clkout_recalc_rate(struct clk_hw *hw,
>> +                                             unsigned long parent_rate)
>> +{
>> +       return 32768;
>> +}
>> +
>> +static int rk808_clkout1_is_prepared(struct clk_hw *hw)
>> +{
>> +       return 1;
>> +}
>> +
>> +static int rk808_clkout2_control(struct clk_hw *hw, bool enable)
>> +{
>> +       struct rk808_clkout *rk808_clkout = container_of(hw,
>> +                                                        struct rk808_clkout,
>> +                                                        clkout2_hw);
>> +       struct rk808 *rk808 = rk808_clkout->rk808;
>> +
>> +       return regmap_update_bits(rk808->regmap, RK808_CLK32OUT_REG,
>> +                                 CLK32KOUT2_EN, enable ? CLK32KOUT2_EN : 0);
>> +}
>> +
>> +static int rk808_clkout2_prepare(struct clk_hw *hw)
>> +{
>> +       return rk808_clkout2_control(hw, 1);
>> +}
>> +
>> +static void rk808_clkout2_unprepare(struct clk_hw *hw)
>> +{
>> +       rk808_clkout2_control(hw, 0);
>> +}
>> +
>> +static int rk808_clkout2_is_prepared(struct clk_hw *hw)
>> +{
>> +       struct rk808_clkout *rk808_clkout = container_of(hw,
>> +                                                        struct rk808_clkout,
>> +                                                        clkout2_hw);
>> +       struct rk808 *rk808 = rk808_clkout->rk808;
>> +       uint32_t val;
>> +
>> +       int ret = regmap_read(rk808->regmap, RK808_CLK32OUT_REG, &val);
>> +
>> +       if (ret < 0)
>> +               return ret;
>> +
>> +       return (val & CLK32KOUT2_EN) ? 1 : 0;
>> +}
>> +
>> +static const struct clk_ops rk808_clkout1_ops = {
>> +       .is_prepared = rk808_clkout1_is_prepared,
>> +       .recalc_rate = rk808_clkout_recalc_rate,
>> +};
>> +
>> +static const struct clk_ops rk808_clkout2_ops = {
>> +       .prepare = rk808_clkout2_prepare,
>> +       .unprepare = rk808_clkout2_unprepare,
>> +       .is_prepared = rk808_clkout2_is_prepared,
>> +       .recalc_rate = rk808_clkout_recalc_rate,
>> +};
>> +
>> +static int rk808_clkout_probe(struct platform_device *pdev)
>> +{
>> +       struct rk808 *rk808 = dev_get_drvdata(pdev->dev.parent);
>> +       struct i2c_client *client = rk808->i2c;
>> +       struct device_node *node = client->dev.of_node;
>> +       struct clk_init_data init = {};
>> +       struct clk **clk_table;
>> +       struct rk808_clkout *rk808_clkout;
>> +
>> +       rk808_clkout = devm_kzalloc(&client->dev,
>> +                                   sizeof(*rk808_clkout), GFP_KERNEL);
>> +       if (!rk808_clkout)
>> +               return -ENOMEM;
>> +
>> +       rk808_clkout->rk808 = rk808;
>> +
>> +       clk_table = devm_kzalloc(&client->dev,
>> +                                2*sizeof(struct clk *), GFP_KERNEL);
>> +       if (!clk_table)
>> +               return -ENOMEM;
>> +
>> +       init.flags = CLK_IS_ROOT;
>> +       init.parent_names = NULL;
>> +       init.num_parents = 0;
>> +       init.name = "rk808-clkout1";
>> +       init.ops = &rk808_clkout1_ops;
>> +       rk808_clkout->clkout1_hw.init = &init;
>> +
>> +       /* optional override of the clockname */
>> +       of_property_read_string_index(node, "clock-output-names",
>> +                                     0, &init.name);
>> +
>> +       clk_table[0] = devm_clk_register(&client->dev,
>> +                                        &rk808_clkout->clkout1_hw);
>> +       if (IS_ERR(clk_table[0]))
>> +               return PTR_ERR(clk_table[0]);
>> +
>> +       init.name = "rk808-clkout2";
>> +       init.ops = &rk808_clkout2_ops;
>> +       rk808_clkout->clkout2_hw.init = &init;
>> +
>> +       /* optional override of the clockname */
>> +       of_property_read_string_index(node, "clock-output-names",
>> +                                     1, &init.name);
>> +
>> +       clk_table[1] = devm_clk_register(&client->dev,
>> +                                        &rk808_clkout->clkout2_hw);
>> +       if (IS_ERR(clk_table[1]))
>> +               return PTR_ERR(clk_table[1]);
>> +
>> +       rk808_clkout->clk_data.clks = clk_table;
>> +       rk808_clkout->clk_data.clk_num = 2;
>> +
>> +       return of_clk_add_provider(node, of_clk_src_onecell_get, clk_table);
> I'm about 99.9% certain that the above line should be:
>
>         return of_clk_add_provider(node, of_clk_src_onecell_get,
>                                    &rk808_clkout->clk_data);
>
> The data for of_clk_src_onecell_get() should be of type "struct
> clk_onecell_data *".
>
>
> Otherwise this looks good to me and you can add my Reviewed-by tag
> (and even my Tested-by tag).
>
> -Doug

Yes, It should be, TKS.

I will modify it in v6


>
>
>


--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html