From: Wei Ni <wni-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
To: Eduardo Valentin <edubezval-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Cc: khali-PUYAD+kWke1g9hUCZPvPmw@public.gmane.org,
linux-0h96xk9xTtrk1uMJSBkQmQ@public.gmane.org,
swarren-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org,
lm-sensors-GZX6beZjE8VD60Wz+7aTrA@public.gmane.org,
linux-tegra-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: Re: [PATCH v3 4/4] ARM: tegra: dalmore: add thermal zones for nct1008
Date: Tue, 26 Aug 2014 10:24:42 +0800 [thread overview]
Message-ID: <53FBEFEA.8050706@nvidia.com> (raw)
In-Reply-To: <20140825111041.GC12349@developer>
On 08/25/2014 07:10 PM, Eduardo Valentin wrote:
> On Mon, Aug 25, 2014 at 02:29:48PM +0800, Wei Ni wrote:
>> From: lightning314 <wni-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
>>
>> Add dt node to describe the thermal zone for the nct1008.
>>
>> Signed-off-by: Wei Ni <wni-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
>> ---
>> arch/arm/boot/dts/tegra114-dalmore.dts | 20 +++++++++++++++++++-
>> 1 file changed, 19 insertions(+), 1 deletion(-)
>>
>> diff --git a/arch/arm/boot/dts/tegra114-dalmore.dts b/arch/arm/boot/dts/tegra114-dalmore.dts
>> index 5c21d21..94a1b5d 100644
>> --- a/arch/arm/boot/dts/tegra114-dalmore.dts
>> +++ b/arch/arm/boot/dts/tegra114-dalmore.dts
>> @@ -779,12 +779,14 @@
>> <&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_HIGH>;
>> };
>>
>> - temperature-sensor@4c {
>> + nct1008: temperature-sensor@4c {
>> compatible = "onnn,nct1008";
>> reg = <0x4c>;
>> vcc-supply = <&palmas_ldo6_reg>;
>> interrupt-parent = <&gpio>;
>> interrupts = <TEGRA_GPIO(O, 4) IRQ_TYPE_LEVEL_LOW>;
>> +
>> + #thermal-sensor-cells = <1>;
>> };
>> };
>>
>> @@ -1283,4 +1285,20 @@
>> <&tegra_car TEGRA114_CLK_EXTERN1>;
>> clock-names = "pll_a", "pll_a_out0", "mclk";
>> };
>> +
>> + thermal-zones {
>> + nct1008-local {
>
> at this level, can the thermal zone name be a meaningful string? What
> part of the hardware does the local and remote monitors the the dalmore
> platform?
Oh, yes, you are right.
I think it's better to use "board_thermal_sensor: nct1008-local" and
"diode_thermal_sensor: nct1008-remote".
Thanks.
Wei.
>
>> + polling-delay-passive = <2000>; /* milliseconds */
>> + polling-delay = <0>; /* milliseconds */
>> +
>> + thermal-sensors = <&nct1008 0>;
>> + };
>> +
>> + nct1008-remote {
>> + polling-delay-passive = <1000>; /* milliseconds */
>> + polling-delay = <0>; /* milliseconds */
>> +
>> + thermal-sensors = <&nct1008 1>;
>> + };
>> + };
>> };
>> --
>> 1.8.1.5
>>
WARNING: multiple messages have this Message-ID (diff)
From: Wei Ni <wni@nvidia.com>
To: Eduardo Valentin <edubezval-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Cc: khali-PUYAD+kWke1g9hUCZPvPmw@public.gmane.org,
linux-0h96xk9xTtrk1uMJSBkQmQ@public.gmane.org,
swarren-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org,
lm-sensors-GZX6beZjE8VD60Wz+7aTrA@public.gmane.org,
linux-tegra-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: Re: [lm-sensors] [PATCH v3 4/4] ARM: tegra: dalmore: add thermal zones for nct1008
Date: Tue, 26 Aug 2014 02:24:42 +0000 [thread overview]
Message-ID: <53FBEFEA.8050706@nvidia.com> (raw)
In-Reply-To: <20140825111041.GC12349@developer>
On 08/25/2014 07:10 PM, Eduardo Valentin wrote:
> On Mon, Aug 25, 2014 at 02:29:48PM +0800, Wei Ni wrote:
>> From: lightning314 <wni@nvidia.com>
>>
>> Add dt node to describe the thermal zone for the nct1008.
>>
>> Signed-off-by: Wei Ni <wni@nvidia.com>
>> ---
>> arch/arm/boot/dts/tegra114-dalmore.dts | 20 +++++++++++++++++++-
>> 1 file changed, 19 insertions(+), 1 deletion(-)
>>
>> diff --git a/arch/arm/boot/dts/tegra114-dalmore.dts b/arch/arm/boot/dts/tegra114-dalmore.dts
>> index 5c21d21..94a1b5d 100644
>> --- a/arch/arm/boot/dts/tegra114-dalmore.dts
>> +++ b/arch/arm/boot/dts/tegra114-dalmore.dts
>> @@ -779,12 +779,14 @@
>> <&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_HIGH>;
>> };
>>
>> - temperature-sensor@4c {
>> + nct1008: temperature-sensor@4c {
>> compatible = "onnn,nct1008";
>> reg = <0x4c>;
>> vcc-supply = <&palmas_ldo6_reg>;
>> interrupt-parent = <&gpio>;
>> interrupts = <TEGRA_GPIO(O, 4) IRQ_TYPE_LEVEL_LOW>;
>> +
>> + #thermal-sensor-cells = <1>;
>> };
>> };
>>
>> @@ -1283,4 +1285,20 @@
>> <&tegra_car TEGRA114_CLK_EXTERN1>;
>> clock-names = "pll_a", "pll_a_out0", "mclk";
>> };
>> +
>> + thermal-zones {
>> + nct1008-local {
>
> at this level, can the thermal zone name be a meaningful string? What
> part of the hardware does the local and remote monitors the the dalmore
> platform?
Oh, yes, you are right.
I think it's better to use "board_thermal_sensor: nct1008-local" and
"diode_thermal_sensor: nct1008-remote".
Thanks.
Wei.
>
>> + polling-delay-passive = <2000>; /* milliseconds */
>> + polling-delay = <0>; /* milliseconds */
>> +
>> + thermal-sensors = <&nct1008 0>;
>> + };
>> +
>> + nct1008-remote {
>> + polling-delay-passive = <1000>; /* milliseconds */
>> + polling-delay = <0>; /* milliseconds */
>> +
>> + thermal-sensors = <&nct1008 1>;
>> + };
>> + };
>> };
>> --
>> 1.8.1.5
>>
_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
WARNING: multiple messages have this Message-ID (diff)
From: Wei Ni <wni@nvidia.com>
To: Eduardo Valentin <edubezval@gmail.com>
Cc: <khali@linux-fr.org>, <linux@roeck-us.net>,
<swarren@wwwdotorg.org>, <lm-sensors@lm-sensors.org>,
<linux-tegra@vger.kernel.org>, <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH v3 4/4] ARM: tegra: dalmore: add thermal zones for nct1008
Date: Tue, 26 Aug 2014 10:24:42 +0800 [thread overview]
Message-ID: <53FBEFEA.8050706@nvidia.com> (raw)
In-Reply-To: <20140825111041.GC12349@developer>
On 08/25/2014 07:10 PM, Eduardo Valentin wrote:
> On Mon, Aug 25, 2014 at 02:29:48PM +0800, Wei Ni wrote:
>> From: lightning314 <wni@nvidia.com>
>>
>> Add dt node to describe the thermal zone for the nct1008.
>>
>> Signed-off-by: Wei Ni <wni@nvidia.com>
>> ---
>> arch/arm/boot/dts/tegra114-dalmore.dts | 20 +++++++++++++++++++-
>> 1 file changed, 19 insertions(+), 1 deletion(-)
>>
>> diff --git a/arch/arm/boot/dts/tegra114-dalmore.dts b/arch/arm/boot/dts/tegra114-dalmore.dts
>> index 5c21d21..94a1b5d 100644
>> --- a/arch/arm/boot/dts/tegra114-dalmore.dts
>> +++ b/arch/arm/boot/dts/tegra114-dalmore.dts
>> @@ -779,12 +779,14 @@
>> <&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_HIGH>;
>> };
>>
>> - temperature-sensor@4c {
>> + nct1008: temperature-sensor@4c {
>> compatible = "onnn,nct1008";
>> reg = <0x4c>;
>> vcc-supply = <&palmas_ldo6_reg>;
>> interrupt-parent = <&gpio>;
>> interrupts = <TEGRA_GPIO(O, 4) IRQ_TYPE_LEVEL_LOW>;
>> +
>> + #thermal-sensor-cells = <1>;
>> };
>> };
>>
>> @@ -1283,4 +1285,20 @@
>> <&tegra_car TEGRA114_CLK_EXTERN1>;
>> clock-names = "pll_a", "pll_a_out0", "mclk";
>> };
>> +
>> + thermal-zones {
>> + nct1008-local {
>
> at this level, can the thermal zone name be a meaningful string? What
> part of the hardware does the local and remote monitors the the dalmore
> platform?
Oh, yes, you are right.
I think it's better to use "board_thermal_sensor: nct1008-local" and
"diode_thermal_sensor: nct1008-remote".
Thanks.
Wei.
>
>> + polling-delay-passive = <2000>; /* milliseconds */
>> + polling-delay = <0>; /* milliseconds */
>> +
>> + thermal-sensors = <&nct1008 0>;
>> + };
>> +
>> + nct1008-remote {
>> + polling-delay-passive = <1000>; /* milliseconds */
>> + polling-delay = <0>; /* milliseconds */
>> +
>> + thermal-sensors = <&nct1008 1>;
>> + };
>> + };
>> };
>> --
>> 1.8.1.5
>>
next prev parent reply other threads:[~2014-08-26 2:24 UTC|newest]
Thread overview: 90+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-08-25 6:29 [PATCH v3 0/4] expose lm90 to thermal fw Wei Ni
2014-08-25 6:29 ` Wei Ni
2014-08-25 6:29 ` [lm-sensors] " Wei Ni
[not found] ` <1408948188-4181-1-git-send-email-wni-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2014-08-25 6:29 ` [PATCH v3 1/4] hwmon: (lm90) split set&show temp as common codes Wei Ni
2014-08-25 6:29 ` Wei Ni
2014-08-25 6:29 ` [lm-sensors] " Wei Ni
[not found] ` <1408948188-4181-2-git-send-email-wni-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2014-08-25 12:23 ` Mikko Perttunen
2014-08-25 12:23 ` Mikko Perttunen
2014-08-25 12:23 ` [lm-sensors] " Mikko Perttunen
[not found] ` <53FB2AAA.30601-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2014-08-26 2:27 ` Wei Ni
2014-08-26 2:27 ` Wei Ni
2014-08-26 2:27 ` [lm-sensors] " Wei Ni
[not found] ` <53FBF09F.8050502-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2014-08-26 12:17 ` Eduardo Valentin
2014-08-26 12:17 ` Eduardo Valentin
2014-08-26 12:17 ` [lm-sensors] " Eduardo Valentin
2014-08-26 16:37 ` Stephen Warren
2014-08-26 16:37 ` [lm-sensors] " Stephen Warren
[not found] ` <53FCB7C6.8000503-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org>
2014-08-27 2:25 ` Wei Ni
2014-08-27 2:25 ` Wei Ni
2014-08-27 2:25 ` [lm-sensors] " Wei Ni
2014-08-25 6:29 ` [PATCH v3 2/4] hwmon: lm90: expose to thermal fw via DT nodes Wei Ni
2014-08-25 6:29 ` Wei Ni
2014-08-25 6:29 ` [lm-sensors] " Wei Ni
2014-08-25 6:29 ` [PATCH v3 3/4] thermal: add more description for thermal-zones Wei Ni
2014-08-25 6:29 ` Wei Ni
2014-08-25 6:29 ` [lm-sensors] " Wei Ni
[not found] ` <1408948188-4181-4-git-send-email-wni-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2014-08-25 11:07 ` Eduardo Valentin
2014-08-25 11:07 ` Eduardo Valentin
2014-08-25 11:07 ` [lm-sensors] " Eduardo Valentin
2014-08-26 2:17 ` Wei Ni
2014-08-26 2:17 ` Wei Ni
2014-08-26 2:17 ` [lm-sensors] " Wei Ni
[not found] ` <53FBEE39.2020001-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2014-08-26 12:12 ` Eduardo Valentin
2014-08-26 12:12 ` Eduardo Valentin
2014-08-26 12:12 ` [lm-sensors] " Eduardo Valentin
2014-08-27 2:54 ` Wei Ni
2014-08-27 2:54 ` Wei Ni
2014-08-27 2:54 ` [lm-sensors] " Wei Ni
2014-08-27 13:32 ` Eduardo Valentin
2014-08-27 13:32 ` [lm-sensors] " Eduardo Valentin
2014-08-28 1:50 ` Wei Ni
2014-08-28 1:50 ` Wei Ni
2014-08-28 1:50 ` [lm-sensors] " Wei Ni
[not found] ` <53FE8AC9.2070907-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2014-08-28 13:21 ` Eduardo Valentin
2014-08-28 13:21 ` Eduardo Valentin
2014-08-28 13:21 ` [lm-sensors] " Eduardo Valentin
2014-08-29 3:03 ` Wei Ni
2014-08-29 3:03 ` Wei Ni
2014-08-29 3:03 ` [lm-sensors] " Wei Ni
[not found] ` <53FFED7B.6010508-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2014-08-29 11:32 ` edubezval-Re5JQEeQqe8AvxtiuMwx3w
2014-08-29 11:32 ` edubezval
2014-08-29 11:32 ` [lm-sensors] " edubezval
[not found] ` <CAC-25o-9OQ-wfpCJmgDGB0kqDHwUc15XX7Ay7Pes6UmpJakUkQ-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2014-09-01 10:26 ` Wei Ni
2014-09-01 10:26 ` Wei Ni
2014-09-01 10:26 ` [lm-sensors] " Wei Ni
[not found] ` <540449BC.2050807-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2014-09-05 9:41 ` Wei Ni
2014-09-05 9:41 ` Wei Ni
2014-09-05 9:41 ` [lm-sensors] " Wei Ni
[not found] ` <54098538.1000505-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2014-08-30 19:43 ` Eduardo Valentin
2014-08-30 19:43 ` Eduardo Valentin
2014-08-30 19:43 ` [lm-sensors] " Eduardo Valentin
2014-09-10 8:14 ` Wei Ni
2014-09-10 8:14 ` Wei Ni
2014-09-10 8:14 ` [lm-sensors] " Wei Ni
2014-09-10 14:10 ` Eduardo Valentin
2014-09-10 14:10 ` Eduardo Valentin
2014-09-10 14:10 ` [lm-sensors] " Eduardo Valentin
2014-08-26 3:03 ` Wei Ni
2014-08-26 3:03 ` Wei Ni
2014-08-26 3:03 ` [lm-sensors] " Wei Ni
2014-08-26 12:08 ` Eduardo Valentin
2014-08-26 12:08 ` [lm-sensors] " Eduardo Valentin
2014-08-27 2:31 ` Wei Ni
2014-08-27 2:31 ` Wei Ni
2014-08-27 2:31 ` [lm-sensors] " Wei Ni
2014-08-25 6:29 ` [PATCH v3 4/4] ARM: tegra: dalmore: add thermal zones for nct1008 Wei Ni
2014-08-25 6:29 ` Wei Ni
2014-08-25 6:29 ` [lm-sensors] " Wei Ni
[not found] ` <1408948188-4181-5-git-send-email-wni-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2014-08-25 11:08 ` Eduardo Valentin
2014-08-25 11:08 ` Eduardo Valentin
2014-08-25 11:08 ` [lm-sensors] " Eduardo Valentin
2014-08-26 2:21 ` Wei Ni
2014-08-26 2:21 ` Wei Ni
2014-08-26 2:21 ` [lm-sensors] " Wei Ni
2014-08-25 11:10 ` Eduardo Valentin
2014-08-25 11:10 ` Eduardo Valentin
2014-08-25 11:10 ` [lm-sensors] " Eduardo Valentin
2014-08-26 2:24 ` Wei Ni [this message]
2014-08-26 2:24 ` Wei Ni
2014-08-26 2:24 ` [lm-sensors] " Wei Ni
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=53FBEFEA.8050706@nvidia.com \
--to=wni-ddmlm1+adcrqt0dzr+alfa@public.gmane.org \
--cc=edubezval-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=khali-PUYAD+kWke1g9hUCZPvPmw@public.gmane.org \
--cc=linux-0h96xk9xTtrk1uMJSBkQmQ@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-tegra-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=lm-sensors-GZX6beZjE8VD60Wz+7aTrA@public.gmane.org \
--cc=swarren-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.