From: "Thomas Hellström" <thomas.hellstrom@linux.intel.com>
To: "Christian König" <christian.koenig@amd.com>,
"Zack Rusin" <zackr@vmware.com>,
"alexdeucher@gmail.com" <alexdeucher@gmail.com>
Cc: "dri-devel@lists.freedesktop.org" <dri-devel@lists.freedesktop.org>
Subject: Re: Decrypting tt maps in ttm
Date: Tue, 19 Sep 2023 08:56:58 +0200 [thread overview]
Message-ID: <53e09f13-eb54-9662-a511-77c012df9646@linux.intel.com> (raw)
In-Reply-To: <5efd9a5d-7c88-855a-8a2f-5d984ea4a5e7@amd.com>
On 9/19/23 07:39, Christian König wrote:
> Am 19.09.23 um 03:26 schrieb Zack Rusin:
>> On Mon, 2023-09-18 at 16:21 -0400, Alex Deucher wrote:
>>> !! External Email
>>>
>>> On Mon, Sep 18, 2023 at 3:06 PM Thomas Hellström
>>> <thomas.hellstrom@linux.intel.com> wrote:
>>>>
>>>> On 9/18/23 17:52, Zack Rusin wrote:
>>>>> On Mon, 2023-09-18 at 17:13 +0200, Thomas Hellström wrote:
>>>>>> Hi,
>>>>>>
>>>>>> On 9/18/23 16:56, Thomas Hellström wrote:
>>>>>>> Hi Zack, Christian
>>>>>>>
>>>>>>> On 9/18/23 13:36, Christian König wrote:
>>>>>>>> Hi Zack,
>>>>>>>>
>>>>>>>> adding Thomas and Daniel.
>>>>>>>>
>>>>>>>> I briefly remember that I talked with Thomas and some other people
>>>>>>>> about that quite a while ago as well, but I don't fully
>>>>>>>> remember the
>>>>>>>> outcome.
>>>>>>> Found one old thread, but didn't read it:
>>>>>>>
>>>>>>> https://lists.freedesktop.org/archives/dri-devel/2019-September/234100.html
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> /Thomas
>>>>>>>
>>>>>>>
>>>>>> Ugh. Now starting to read that thread I have a vague recollection
>>>>>> it all
>>>>>> ended with not supporting mapping any device pages whatsoever
>>>>>> when SEV
>>>>>> was enabled, but rather resorting to llvmpipe and VM-local bos.
>>>>> Hi, Thomas.
>>>>>
>>>>> Thanks for finding this! I'd (of course) like to solve it properly
>>>>> and get
>>>>> vmwgfx
>>>>> running with 3d support with SEV-ES active instead of essentially
>>>>> disabling
>>>>> the
>>>>> driver when SEV-ES is active.
>>>>>
>>>>> I think there are two separate discussions there, the
>>>>> non-controversial one
>>>>> and the
>>>>> controversial one:
>>>>> 1) The non-controversial: is there a case where drivers would want
>>>>> encrypted
>>>>> memory
>>>>> for TT pages but not for io mem mappings? Because if not then as
>>>>> Christian
>>>>> pointed
>>>>> out we could just add pgprot_decrypted to ttm_io_prot and be
>>>>> essentially done.
>>>>> The
>>>>> current method of decrypting io mem but leaving sys mem mappings
>>>>> encrypted is
>>>>> a bit
>>>>> weird anyway.
>>>>>
>>>>> If the answer to that question is "yes, some driver does want the
>>>>> TT mappings
>>>>> to be
>>>>> encrypted" then your "[PATCH v2 3/4] drm/ttm, drm/vmwgfx:
>>>>> Correctly support
>>>>> support
>>>>> AMD memory encryption" solves that. I think getting one of those
>>>>> two in makes
>>>>> sense
>>>>> regardless of everything else, agreed?
>>>> Well, there is more to it I think.
>>>>
>>>> IIRC, the AMD SME encryption mode has a way for a device to have the
>>>> memory controller (?) encrypt / decrypt device traffic by using an
>>>> address range alias, so in theory it supports encrypted TT pages, and
>>>> the dma-layer may indeed hand encrypted DMA pages to TTM on such
>>>> systems
>>>> depending on the device's DMA mask. That's why I think that
>>>> force_dma_unencrypted() export was needed, and If the amdgpu driver
>>>> accesses TT memory in SME mode *without* pgprot_decrypted() and it
>>>> still
>>>> works, then I think that mode is actually used. How could it
>>>> otherwise work?
>>> For SME, as long as the encrypted bit is set in the physical address
>>> used for DMA, the memory controller will handle the encrypt/decrypt
>>> for the device. For devices with a limited dma mask, you need to use
>>> the IOMMU so that the encrypted bit is retained when the address hits
>>> the memory controller.
>> How does that work on systems with swiotlb, e.g. swiotlb=force, or
>> i.e. what would
>> decrypt the ttm tt mappings when copying between system and vram when
>> iommu is
>> disabled/absent?
>
> SME makes it mandatory that all devices can handle the physical
> address used for DMA, either native or with the help of IOMMU.
>
> Hacks like SWIOTLB are not directly supported as far as I know. Maybe
> somehow SWIOTLB manually decrypts the data while copying it or
> something like this, but I'm not 100% sure if that is actually
> implemented.
>
> Regards,
> Christian.
A bold guess after looking at various code and patches:
1) Devices under SME that don't support the encryption bit and SEV:
a) Coherent memory is unencrypted.
b) Streaming DMA under IOMMU: The IOMMU sets the encrypted bit.
c) Streaming DMA with SWIOTLB: The bounce buffer is unencrypted. Copying
to/from bounce-buffer decrypts/encrypts.
2) Devices under SME that do support the encryption bit (which I believe
is most graphics devices in general on SME systems, not just amdgpu; it
"just works")
*) Coherent memory is encrypted. The DMA layer sets dma addresses and
pgprot accordingly.
*) Streaming DMA is encrypted.
So the bug in TTM would then be it's not handling 1a) and 1b) correctly.
Remedy:
1b) Shouldn't be used with encryption.
1a) This is what we should try to fix. Exporting dma_force_unencrypted()
didn't seem to be a way forward. Properly fixing this would, I guess,
mean implement the missing functionality in the dma layer: For vmap /
kmap we could simply reuse the virtual addresses we get back from
dma_alloc_coherent(), but for faulting one would want something like
dma_coherent_insert_pfn() (if it doesn't exist already) after a proper
disussion with Christoph Hellwig.
/Thomas
>
>>
>> z
>>
>
next prev parent reply other threads:[~2023-09-19 6:57 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <15c9beb5f8dcb091b00c35d6206b84aa100d729e.camel@vmware.com>
[not found] ` <60f15275-ebfd-2fd6-64c4-c8907520e5dd@amd.com>
[not found] ` <3fa9b4d0-e12a-59b6-14c5-68f7406df129@linux.intel.com>
[not found] ` <fc935b9f-9b25-bcab-717c-0c31373fcfee@linux.intel.com>
[not found] ` <e9ba0f7a0620cd252adfc1df43cd15d16dcea74d.camel@vmware.com>
2023-09-18 17:11 ` Decrypting tt maps in ttm Thomas Hellström
2023-09-18 20:21 ` Alex Deucher
2023-09-19 1:26 ` Zack Rusin
2023-09-19 5:39 ` Christian König
2023-09-19 6:56 ` Thomas Hellström [this message]
2023-09-19 7:47 ` Christian König
2023-09-20 3:43 ` Zack Rusin
2023-09-20 7:36 ` Thomas Hellström
2023-09-20 10:48 ` Christian König
2023-09-20 16:39 ` Zack Rusin
2023-09-20 17:17 ` Thomas Hellström
2023-09-20 18:24 ` Zack Rusin
2023-09-20 19:22 ` Thomas Hellström
2023-09-21 3:51 ` Zack Rusin
2023-09-21 7:12 ` Thomas Hellström
2023-09-22 10:46 ` Christian König
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=53e09f13-eb54-9662-a511-77c012df9646@linux.intel.com \
--to=thomas.hellstrom@linux.intel.com \
--cc=alexdeucher@gmail.com \
--cc=christian.koenig@amd.com \
--cc=dri-devel@lists.freedesktop.org \
--cc=zackr@vmware.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.