From: Zack Rusin <zackr@vmware.com>
To: "alexdeucher@gmail.com" <alexdeucher@gmail.com>,
"thomas.hellstrom@linux.intel.com"
<thomas.hellstrom@linux.intel.com>
Cc: "dri-devel@lists.freedesktop.org"
<dri-devel@lists.freedesktop.org>,
"christian.koenig@amd.com" <christian.koenig@amd.com>
Subject: Re: Decrypting tt maps in ttm
Date: Tue, 19 Sep 2023 01:26:21 +0000 [thread overview]
Message-ID: <b8fa7c6a4cd01fdfabef512972f79b67a1cbe58c.camel@vmware.com> (raw)
In-Reply-To: <CADnq5_PPAZqusAoMTrG3OE3seZTQZbj1HC1u-4d5hcCQHsPD0g@mail.gmail.com>
On Mon, 2023-09-18 at 16:21 -0400, Alex Deucher wrote:
> !! External Email
>
> On Mon, Sep 18, 2023 at 3:06 PM Thomas Hellström
> <thomas.hellstrom@linux.intel.com> wrote:
> >
> >
> > On 9/18/23 17:52, Zack Rusin wrote:
> > > On Mon, 2023-09-18 at 17:13 +0200, Thomas Hellström wrote:
> > > > Hi,
> > > >
> > > > On 9/18/23 16:56, Thomas Hellström wrote:
> > > > > Hi Zack, Christian
> > > > >
> > > > > On 9/18/23 13:36, Christian König wrote:
> > > > > > Hi Zack,
> > > > > >
> > > > > > adding Thomas and Daniel.
> > > > > >
> > > > > > I briefly remember that I talked with Thomas and some other people
> > > > > > about that quite a while ago as well, but I don't fully remember the
> > > > > > outcome.
> > > > > Found one old thread, but didn't read it:
> > > > >
> > > > > https://lists.freedesktop.org/archives/dri-devel/2019-September/234100.html
> > > > >
> > > > >
> > > > > /Thomas
> > > > >
> > > > >
> > > > Ugh. Now starting to read that thread I have a vague recollection it all
> > > > ended with not supporting mapping any device pages whatsoever when SEV
> > > > was enabled, but rather resorting to llvmpipe and VM-local bos.
> > > Hi, Thomas.
> > >
> > > Thanks for finding this! I'd (of course) like to solve it properly and get
> > > vmwgfx
> > > running with 3d support with SEV-ES active instead of essentially disabling
> > > the
> > > driver when SEV-ES is active.
> > >
> > > I think there are two separate discussions there, the non-controversial one
> > > and the
> > > controversial one:
> > > 1) The non-controversial: is there a case where drivers would want encrypted
> > > memory
> > > for TT pages but not for io mem mappings? Because if not then as Christian
> > > pointed
> > > out we could just add pgprot_decrypted to ttm_io_prot and be essentially done.
> > > The
> > > current method of decrypting io mem but leaving sys mem mappings encrypted is
> > > a bit
> > > weird anyway.
> > >
> > > If the answer to that question is "yes, some driver does want the TT mappings
> > > to be
> > > encrypted" then your "[PATCH v2 3/4] drm/ttm, drm/vmwgfx: Correctly support
> > > support
> > > AMD memory encryption" solves that. I think getting one of those two in makes
> > > sense
> > > regardless of everything else, agreed?
> >
> > Well, there is more to it I think.
> >
> > IIRC, the AMD SME encryption mode has a way for a device to have the
> > memory controller (?) encrypt / decrypt device traffic by using an
> > address range alias, so in theory it supports encrypted TT pages, and
> > the dma-layer may indeed hand encrypted DMA pages to TTM on such systems
> > depending on the device's DMA mask. That's why I think that
> > force_dma_unencrypted() export was needed, and If the amdgpu driver
> > accesses TT memory in SME mode *without* pgprot_decrypted() and it still
> > works, then I think that mode is actually used. How could it otherwise work?
>
> For SME, as long as the encrypted bit is set in the physical address
> used for DMA, the memory controller will handle the encrypt/decrypt
> for the device. For devices with a limited dma mask, you need to use
> the IOMMU so that the encrypted bit is retained when the address hits
> the memory controller.
How does that work on systems with swiotlb, e.g. swiotlb=force, or i.e. what would
decrypt the ttm tt mappings when copying between system and vram when iommu is
disabled/absent?
z
next prev parent reply other threads:[~2023-09-19 1:26 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <15c9beb5f8dcb091b00c35d6206b84aa100d729e.camel@vmware.com>
[not found] ` <60f15275-ebfd-2fd6-64c4-c8907520e5dd@amd.com>
[not found] ` <3fa9b4d0-e12a-59b6-14c5-68f7406df129@linux.intel.com>
[not found] ` <fc935b9f-9b25-bcab-717c-0c31373fcfee@linux.intel.com>
[not found] ` <e9ba0f7a0620cd252adfc1df43cd15d16dcea74d.camel@vmware.com>
2023-09-18 17:11 ` Decrypting tt maps in ttm Thomas Hellström
2023-09-18 20:21 ` Alex Deucher
2023-09-19 1:26 ` Zack Rusin [this message]
2023-09-19 5:39 ` Christian König
2023-09-19 6:56 ` Thomas Hellström
2023-09-19 7:47 ` Christian König
2023-09-20 3:43 ` Zack Rusin
2023-09-20 7:36 ` Thomas Hellström
2023-09-20 10:48 ` Christian König
2023-09-20 16:39 ` Zack Rusin
2023-09-20 17:17 ` Thomas Hellström
2023-09-20 18:24 ` Zack Rusin
2023-09-20 19:22 ` Thomas Hellström
2023-09-21 3:51 ` Zack Rusin
2023-09-21 7:12 ` Thomas Hellström
2023-09-22 10:46 ` Christian König
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=b8fa7c6a4cd01fdfabef512972f79b67a1cbe58c.camel@vmware.com \
--to=zackr@vmware.com \
--cc=alexdeucher@gmail.com \
--cc=christian.koenig@amd.com \
--cc=dri-devel@lists.freedesktop.org \
--cc=thomas.hellstrom@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.