[PATCH] iio: accel: kxcjk-1013: add support for kxcj9-1008

[PATCH] iio: accel: kxcjk-1013: add support for kxcj9-1008

[Daniel Baluta]

This patch adds support for KXCJ9-1008 3-axis acceleromenter sensor.
KXCJ9-1008 uses the same register definitions as KXCJK-1013.

The specification for KXCJ9-1008 can be downloaded from:
http://www.kionix.com/sites/default/files/KXCJ9-1008%20Specifications%20Rev%205.pdf

Signed-off-by: Daniel Baluta <daniel.baluta@intel.com>
---
 drivers/iio/accel/Kconfig      | 2 +-
 drivers/iio/accel/kxcjk-1013.c | 2 ++
 2 files changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/iio/accel/Kconfig b/drivers/iio/accel/Kconfig
index 5704d6b..01b857e 100644
--- a/drivers/iio/accel/Kconfig
+++ b/drivers/iio/accel/Kconfig
@@ -97,7 +97,7 @@ config KXCJK1013
 	select IIO_TRIGGERED_BUFFER
 	help
 	  Say Y here if you want to build a driver for the Kionix KXCJK-1013
-	  triaxial acceleration sensor.
+	  triaxial acceleration sensor. This driver also supports KXCJ9-1008.
 
 	  To compile this driver as a module, choose M here: the module will
 	  be called kxcjk-1013.
diff --git a/drivers/iio/accel/kxcjk-1013.c b/drivers/iio/accel/kxcjk-1013.c
index 57c515b..70a5679 100644
--- a/drivers/iio/accel/kxcjk-1013.c
+++ b/drivers/iio/accel/kxcjk-1013.c
@@ -932,12 +932,14 @@ static const struct dev_pm_ops kxcjk1013_pm_ops = {
 
 static const struct acpi_device_id kx_acpi_match[] = {
 	{"KXCJ1013", 0},
+	{"KXCJ1008", 0},
 	{ },
 };
 MODULE_DEVICE_TABLE(acpi, kx_acpi_match);
 
 static const struct i2c_device_id kxcjk1013_id[] = {
 	{"kxcjk1013", 0},
+	{"kxcj91008", 0},
 	{}
 };
 
-- 
1.9.1

Re: [PATCH] iio: accel: kxcjk-1013: add support for kxcj9-1008

[Daniel Baluta]

On Tue, Aug 19, 2014 at 6:25 PM, Daniel Baluta <daniel.baluta@intel.com> wrote:
> This patch adds support for KXCJ9-1008 3-axis acceleromenter sensor.
> KXCJ9-1008 uses the same register definitions as KXCJK-1013.
>
> The specification for KXCJ9-1008 can be downloaded from:
> http://www.kionix.com/sites/default/files/KXCJ9-1008%20Specifications%20Rev%205.pdf
>
> Signed-off-by: Daniel Baluta <daniel.baluta@intel.com>

Hi Jonathan,

Any comments on this?

On Monday I will send a patch that adds support  KXTJ2-1009 and its
based on this patch.
I can squash them together if you want.

Daniel.

Re: [PATCH] iio: accel: kxcjk-1013: add support for kxcj9-1008

[Jonathan Cameron]

On 30/08/14 12:44, Daniel Baluta wrote:
> On Tue, Aug 19, 2014 at 6:25 PM, Daniel Baluta <daniel.baluta@intel.com> wrote:
>> This patch adds support for KXCJ9-1008 3-axis acceleromenter sensor.
>> KXCJ9-1008 uses the same register definitions as KXCJK-1013.
>>
>> The specification for KXCJ9-1008 can be downloaded from:
>> http://www.kionix.com/sites/default/files/KXCJ9-1008%20Specifications%20Rev%205.pdf
>>
>> Signed-off-by: Daniel Baluta <daniel.baluta@intel.com>
> 
> Hi Jonathan,
> 
> Any comments on this?
Sorry, I was just being slow!

Anyhow, applied to the togreg branch of iio.git - initially pushed out as testing
for the autobuilders to play.
> 
> On Monday I will send a patch that adds support  KXTJ2-1009 and its
> based on this patch.
> I can squash them together if you want.
A separate patch would be great - I'm guessing htis one is a little more involved!

Jonathan
> 
> Daniel.
> --
> To unsubscribe from this list: send the line "unsubscribe linux-iio" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
>