From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
To: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Tony Lindgren <tony@atomide.com>,
linux-fbdev@vger.kernel.org, linux-omap@vger.kernel.org,
dri-devel@lists.freedesktop.org
Subject: Re: [PATCH] video: fix composite video connector compatible string
Date: Tue, 02 Sep 2014 21:13:05 +0000 [thread overview]
Message-ID: <5403142.A0DomZZZZ1@avalon> (raw)
In-Reply-To: <1409643346-8656-1-git-send-email-tomi.valkeinen@ti.com>
Hi Tomi,
Thank you for the patch.
On Tuesday 02 September 2014 10:35:46 Tomi Valkeinen wrote:
> The quite-recently-added analog-tv-connector bindings say that the
> compatible string for composite video connector is
> "composite-connector". That string is also used in the omap3-n900.dts
> file. However, the connector driver uses "composite-video-connector", so
> this has never worked.
>
> While changing the driver's compatible string to "composite-connector"
> would be safer, as published DT bindings should not be changed, I'd
> rather fix the bindings in this case for two reasons:
>
> * composite-connector is a bit too generic name, as it doesn't even hint
> at video.
> * it's clear that this has never worked, which means no one has used
> those bindings, which should make it safe to change this.
>
> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
> Reported-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> ---
> Documentation/devicetree/bindings/video/analog-tv-connector.txt | 4 ++--
> arch/arm/boot/dts/omap3-n900.dts | 2 +-
> 2 files changed, 3 insertions(+), 3 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/video/analog-tv-connector.txt
> b/Documentation/devicetree/bindings/video/analog-tv-connector.txt index
> 0218fcdc1299..0c0970c210ab 100644
> --- a/Documentation/devicetree/bindings/video/analog-tv-connector.txt
> +++ b/Documentation/devicetree/bindings/video/analog-tv-connector.txt
> @@ -2,7 +2,7 @@ Analog TV Connector
> =========>
> Required properties:
> -- compatible: "composite-connector" or "svideo-connector"
> +- compatible: "composite-video-connector" or "svideo-connector"
>
> Optional properties:
> - label: a symbolic name for the connector
> @@ -14,7 +14,7 @@ Example
> -------
>
> tv: connector {
> - compatible = "composite-connector";
> + compatible = "composite-video-connector";
> label = "tv";
>
> port {
> diff --git a/arch/arm/boot/dts/omap3-n900.dts
> b/arch/arm/boot/dts/omap3-n900.dts index 1fe45d1f75ec..4361777a08d8 100644
> --- a/arch/arm/boot/dts/omap3-n900.dts
> +++ b/arch/arm/boot/dts/omap3-n900.dts
> @@ -93,7 +93,7 @@
> };
>
> tv: connector {
> - compatible = "composite-connector";
> + compatible = "composite-video-connector";
> label = "tv";
>
> port {
--
Regards,
Laurent Pinchart
WARNING: multiple messages have this Message-ID (diff)
From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
To: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Tony Lindgren <tony@atomide.com>,
linux-fbdev@vger.kernel.org, linux-omap@vger.kernel.org,
dri-devel@lists.freedesktop.org
Subject: Re: [PATCH] video: fix composite video connector compatible string
Date: Wed, 03 Sep 2014 00:13:05 +0300 [thread overview]
Message-ID: <5403142.A0DomZZZZ1@avalon> (raw)
In-Reply-To: <1409643346-8656-1-git-send-email-tomi.valkeinen@ti.com>
Hi Tomi,
Thank you for the patch.
On Tuesday 02 September 2014 10:35:46 Tomi Valkeinen wrote:
> The quite-recently-added analog-tv-connector bindings say that the
> compatible string for composite video connector is
> "composite-connector". That string is also used in the omap3-n900.dts
> file. However, the connector driver uses "composite-video-connector", so
> this has never worked.
>
> While changing the driver's compatible string to "composite-connector"
> would be safer, as published DT bindings should not be changed, I'd
> rather fix the bindings in this case for two reasons:
>
> * composite-connector is a bit too generic name, as it doesn't even hint
> at video.
> * it's clear that this has never worked, which means no one has used
> those bindings, which should make it safe to change this.
>
> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
> Reported-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> ---
> Documentation/devicetree/bindings/video/analog-tv-connector.txt | 4 ++--
> arch/arm/boot/dts/omap3-n900.dts | 2 +-
> 2 files changed, 3 insertions(+), 3 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/video/analog-tv-connector.txt
> b/Documentation/devicetree/bindings/video/analog-tv-connector.txt index
> 0218fcdc1299..0c0970c210ab 100644
> --- a/Documentation/devicetree/bindings/video/analog-tv-connector.txt
> +++ b/Documentation/devicetree/bindings/video/analog-tv-connector.txt
> @@ -2,7 +2,7 @@ Analog TV Connector
> ===================
>
> Required properties:
> -- compatible: "composite-connector" or "svideo-connector"
> +- compatible: "composite-video-connector" or "svideo-connector"
>
> Optional properties:
> - label: a symbolic name for the connector
> @@ -14,7 +14,7 @@ Example
> -------
>
> tv: connector {
> - compatible = "composite-connector";
> + compatible = "composite-video-connector";
> label = "tv";
>
> port {
> diff --git a/arch/arm/boot/dts/omap3-n900.dts
> b/arch/arm/boot/dts/omap3-n900.dts index 1fe45d1f75ec..4361777a08d8 100644
> --- a/arch/arm/boot/dts/omap3-n900.dts
> +++ b/arch/arm/boot/dts/omap3-n900.dts
> @@ -93,7 +93,7 @@
> };
>
> tv: connector {
> - compatible = "composite-connector";
> + compatible = "composite-video-connector";
> label = "tv";
>
> port {
--
Regards,
Laurent Pinchart
next prev parent reply other threads:[~2014-09-02 21:13 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-09-02 7:35 [PATCH] video: fix composite video connector compatible string Tomi Valkeinen
2014-09-02 7:35 ` Tomi Valkeinen
2014-09-02 21:13 ` Laurent Pinchart [this message]
2014-09-02 21:13 ` Laurent Pinchart
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5403142.A0DomZZZZ1@avalon \
--to=laurent.pinchart@ideasonboard.com \
--cc=dri-devel@lists.freedesktop.org \
--cc=linux-fbdev@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=tomi.valkeinen@ti.com \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.