[Qemu-devel] info usb lists non unique device entries?

[Qemu-devel] info usb lists non unique device entries?

[Richie]

Using Arch qemu 2.1.0-2

I haven't actually made use of usb_del but I expect that I would 
normally run something like `usb_del 0.4`  (after usb eject in quest).

(qemu) info usb
   Device 0.1, Port 1, Speed 1.5 Mb/s, Product USB Multimedia Keyboard
   Device 0.2, Port 2, Speed 12 Mb/s, Product USB Receiver
   Device 0.1, Port 3, Speed 12 Mb/s, Product Xbox 360 Wireless Receiver 
for
   Device 0.1, Port 4, Speed 480 Mb/s, Product External USB HDD

initial usb line is -usb -usbdevice host:046d:c313 -usbdevice 
host:046d:c52f -usbdevice host:045e:0719 \   ,,,, external drive was 
added via qemu monitor usb_add host:0480:a004 after boot which works 
fine during usage


(qemu) info usbhost
   Bus 3, Addr 13, Port 1.4.6, Speed 12 Mb/s
     Class 00: USB device 046d:c52e, USB Receiver
   Bus 3, Addr 12, Port 1.4.5, Speed 480 Mb/s
     Class 00: USB device 0480:a004, External USB HDD
   Bus 3, Addr 10, Port 1.3, Speed 12 Mb/s
     Class ff: USB device 045e:0719, Xbox 360 Wireless Receiver for Windows
   Bus 3, Addr 4, Port 1.2, Speed 1.5 Mb/s
     Class 00: USB device 046d:c313, USB Multimedia Keyboard
   Bus 3, Addr 3, Port 1.1, Speed 12 Mb/s
     Class 00: USB device 046d:c52f, USB Receiver


Full qemu line:
  qemu-system-x86_64 -enable-kvm -M q35 -m 4096 -cpu host,kvm=off \
-smp 4,sockets=1,cores=4,threads=1 \
-bios /usr/share/qemu/bios.bin -vga none \
-device 
ioh3420,bus=pcie.0,addr=1c.0,multifunction=on,port=1,chassis=1,id=root.1 \
-device 
vfio-pci,host=01:00.0,bus=root.1,addr=00.0,multifunction=on,x-vga=on \
-device vfio-pci,host=01:00.1,bus=root.1,addr=00.1 \
-device virtio-scsi-pci,id=scsi \
-drive file=/dev/dataone/virthub-disk1,id=disk,format=raw -device 
scsi-hd,drive=disk \
-drive file=/dev/datatwo/virthub-games,id=disk2,format=raw -device 
scsi-hd,drive=disk2 \
-boot menu=on \
-usb -usbdevice host:046d:c313 -usbdevice host:046d:c52f -usbdevice 
host:045e:0719 \
-net nic,macaddr="XX:XX:XX:XX:XX:XX",model=virtio -net bridge,br=br0 \
-device vfio-pci,host=00:1b.0,bus=pcie.0,addr=1b.0,id=sound0 \
-nographic