diff for duplicates of <54131782.2000204@sam-solutions.net> diff --git a/a/1.txt b/N1/1.txt index 51f3e88..1d4fedf 100644 --- a/a/1.txt +++ b/N1/1.txt @@ -3,7 +3,7 @@ On 11/09/14 11:47, Philipp Zabel wrote: >> Since pins and frequency are specific to module (pfla02), not base board >> (pbab02), it is better to be initialized in corresponding dts file. >> ->> Signed-off-by: Dmitry Lavnikevich <d.lavnikevich-H6HfJ9slvY0Aspv4Qr0y0gC/G2K4zDHf@public.gmane.org> +>> Signed-off-by: Dmitry Lavnikevich <d.lavnikevich@sam-solutions.com> > I have seen boards use the GPIO_3/6 pads instead of EIM_D17/D18 for > I2C3, but the EIM_D17/D18 are indeed documented as "I2C1" pins at the > pfla02 connector level. @@ -19,9 +19,9 @@ Because of this specified i2c wasn't working correctly and caused messages: imx6q-pinctrl 20e0000.iomuxc: no groups defined in -/soc/aips-bus@02000000/iomuxc@020e0000/i2c2grp +/soc/aips-bus at 02000000/iomuxc at 020e0000/i2c2grp imx6q-pinctrl 20e0000.iomuxc: no groups defined in -/soc/aips-bus@02000000/iomuxc@020e0000/i2c3grp +/soc/aips-bus at 02000000/iomuxc at 020e0000/i2c3grp imx6q-pinctrl 20e0000.iomuxc: unable to find group for node i2c2grp imx6q-pinctrl 20e0000.iomuxc: unable to find group for node i2c3grp @@ -29,7 +29,3 @@ Added this into commit message with new patchset. Best regards, Lavnikevich Dmitry --- -To unsubscribe from this list: send the line "unsubscribe devicetree" in -the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org -More majordomo info at http://vger.kernel.org/majordomo-info.html diff --git a/a/content_digest b/N1/content_digest index c95a050..23e7927 100644 --- a/a/content_digest +++ b/N1/content_digest @@ -1,30 +1,10 @@ "ref\01410356809-26179-1-git-send-email-d.lavnikevich@sam-solutions.com\0" "ref\01410356809-26179-2-git-send-email-d.lavnikevich@sam-solutions.com\0" "ref\01410425238.4011.18.camel@paszta.hi.pengutronix.de\0" - "ref\01410425238.4011.18.camel-+qGW7pzALmz7o/J7KWpOmN53zsg1cpMQ@public.gmane.org\0" - "From\0Dmitry Lavnikevich <d.lavnikevich-H6HfJ9slvY2ikuSvNLsyVV6hYfS7NtTn@public.gmane.org>\0" - "Subject\0Re: [PATCH 1/5] ARM: dts: pbab01: move i2c pins and frequency configuration into pfla02\0" + "From\0d.lavnikevich@sam-solutions.net (Dmitry Lavnikevich)\0" + "Subject\0[PATCH 1/5] ARM: dts: pbab01: move i2c pins and frequency configuration into pfla02\0" "Date\0Fri, 12 Sep 2014 18:55:46 +0300\0" - "To\0Philipp Zabel <p.zabel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>" - " Dmitry Lavnikevich <d.lavnikevich-H6HfJ9slvY0Aspv4Qr0y0gC/G2K4zDHf@public.gmane.org>\0" - "Cc\0robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org" - pawel.moll-5wv7dgnIgG8@public.gmane.org - mark.rutland-5wv7dgnIgG8@public.gmane.org - ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org - galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org - shawn.guo-KZfg59tc24xl57MIdRCFDg@public.gmane.org - kernel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org - linux-lFZ/pmaqli7XmaaqVzeoHQ@public.gmane.org - perex-/Fr2/VpizcU@public.gmane.org - tiwai-l3A5Bk7waGM@public.gmane.org - timur-N01EOCouUvQ@public.gmane.org - nicoleotsuka-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org - Li.Xiubo-KZfg59tc24xl57MIdRCFDg@public.gmane.org - grant.likely-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org - linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org - devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org - linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org - " alsa-devel-K7yf7f+aM1XWsZ/bQMPhNw@public.gmane.org\0" + "To\0linux-arm-kernel@lists.infradead.org\0" "\00:1\0" "b\0" "On 11/09/14 11:47, Philipp Zabel wrote:\n" @@ -32,7 +12,7 @@ ">> Since pins and frequency are specific to module (pfla02), not base board\n" ">> (pbab02), it is better to be initialized in corresponding dts file.\n" ">>\n" - ">> Signed-off-by: Dmitry Lavnikevich <d.lavnikevich-H6HfJ9slvY0Aspv4Qr0y0gC/G2K4zDHf@public.gmane.org>\n" + ">> Signed-off-by: Dmitry Lavnikevich <d.lavnikevich@sam-solutions.com>\n" "> I have seen boards use the GPIO_3/6 pads instead of EIM_D17/D18 for\n" "> I2C3, but the EIM_D17/D18 are indeed documented as \"I2C1\" pins at the\n" "> pfla02 connector level.\n" @@ -48,19 +28,15 @@ "messages:\n" "\n" "imx6q-pinctrl 20e0000.iomuxc: no groups defined in \n" - "/soc/aips-bus@02000000/iomuxc@020e0000/i2c2grp\n" + "/soc/aips-bus at 02000000/iomuxc at 020e0000/i2c2grp\n" "imx6q-pinctrl 20e0000.iomuxc: no groups defined in \n" - "/soc/aips-bus@02000000/iomuxc@020e0000/i2c3grp\n" + "/soc/aips-bus at 02000000/iomuxc at 020e0000/i2c3grp\n" "imx6q-pinctrl 20e0000.iomuxc: unable to find group for node i2c2grp\n" "imx6q-pinctrl 20e0000.iomuxc: unable to find group for node i2c3grp\n" "\n" "Added this into commit message with new patchset.\n" "\n" "Best regards,\n" - "Lavnikevich Dmitry\n" - "--\n" - "To unsubscribe from this list: send the line \"unsubscribe devicetree\" in\n" - "the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org\n" - More majordomo info at http://vger.kernel.org/majordomo-info.html + Lavnikevich Dmitry -e0ac5e39f961f58765b8078ea8ba15107d48ff2868ebb81bd7fb394f6d5c5afb +efda47065c058f188023217284552adf8d2f6322ef66d92efcc6cb22779f95ec
diff --git a/a/1.txt b/N2/1.txt index 51f3e88..cf019d2 100644 --- a/a/1.txt +++ b/N2/1.txt @@ -3,7 +3,7 @@ On 11/09/14 11:47, Philipp Zabel wrote: >> Since pins and frequency are specific to module (pfla02), not base board >> (pbab02), it is better to be initialized in corresponding dts file. >> ->> Signed-off-by: Dmitry Lavnikevich <d.lavnikevich-H6HfJ9slvY0Aspv4Qr0y0gC/G2K4zDHf@public.gmane.org> +>> Signed-off-by: Dmitry Lavnikevich <d.lavnikevich@sam-solutions.com> > I have seen boards use the GPIO_3/6 pads instead of EIM_D17/D18 for > I2C3, but the EIM_D17/D18 are indeed documented as "I2C1" pins at the > pfla02 connector level. @@ -29,7 +29,3 @@ Added this into commit message with new patchset. Best regards, Lavnikevich Dmitry --- -To unsubscribe from this list: send the line "unsubscribe devicetree" in -the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org -More majordomo info at http://vger.kernel.org/majordomo-info.html diff --git a/a/content_digest b/N2/content_digest index c95a050..ad55973 100644 --- a/a/content_digest +++ b/N2/content_digest @@ -1,30 +1,29 @@ "ref\01410356809-26179-1-git-send-email-d.lavnikevich@sam-solutions.com\0" "ref\01410356809-26179-2-git-send-email-d.lavnikevich@sam-solutions.com\0" "ref\01410425238.4011.18.camel@paszta.hi.pengutronix.de\0" - "ref\01410425238.4011.18.camel-+qGW7pzALmz7o/J7KWpOmN53zsg1cpMQ@public.gmane.org\0" - "From\0Dmitry Lavnikevich <d.lavnikevich-H6HfJ9slvY2ikuSvNLsyVV6hYfS7NtTn@public.gmane.org>\0" + "From\0Dmitry Lavnikevich <d.lavnikevich@sam-solutions.net>\0" "Subject\0Re: [PATCH 1/5] ARM: dts: pbab01: move i2c pins and frequency configuration into pfla02\0" "Date\0Fri, 12 Sep 2014 18:55:46 +0300\0" - "To\0Philipp Zabel <p.zabel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>" - " Dmitry Lavnikevich <d.lavnikevich-H6HfJ9slvY0Aspv4Qr0y0gC/G2K4zDHf@public.gmane.org>\0" - "Cc\0robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org" - pawel.moll-5wv7dgnIgG8@public.gmane.org - mark.rutland-5wv7dgnIgG8@public.gmane.org - ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org - galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org - shawn.guo-KZfg59tc24xl57MIdRCFDg@public.gmane.org - kernel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org - linux-lFZ/pmaqli7XmaaqVzeoHQ@public.gmane.org - perex-/Fr2/VpizcU@public.gmane.org - tiwai-l3A5Bk7waGM@public.gmane.org - timur-N01EOCouUvQ@public.gmane.org - nicoleotsuka-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org - Li.Xiubo-KZfg59tc24xl57MIdRCFDg@public.gmane.org - grant.likely-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org - linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org - devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org - linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org - " alsa-devel-K7yf7f+aM1XWsZ/bQMPhNw@public.gmane.org\0" + "To\0Philipp Zabel <p.zabel@pengutronix.de>" + " Dmitry Lavnikevich <d.lavnikevich@sam-solutions.com>\0" + "Cc\0<robh+dt@kernel.org>" + <pawel.moll@arm.com> + <mark.rutland@arm.com> + <ijc+devicetree@hellion.org.uk> + <galak@codeaurora.org> + <shawn.guo@freescale.com> + <kernel@pengutronix.de> + <linux@arm.linux.org.uk> + <perex@perex.cz> + <tiwai@suse.de> + <timur@tabi.org> + <nicoleotsuka@gmail.com> + <Li.Xiubo@freescale.com> + <grant.likely@linaro.org> + <linux-kernel@vger.kernel.org> + <devicetree@vger.kernel.org> + <linux-arm-kernel@lists.infradead.org> + " <alsa-devel@alsa-project.org>\0" "\00:1\0" "b\0" "On 11/09/14 11:47, Philipp Zabel wrote:\n" @@ -32,7 +31,7 @@ ">> Since pins and frequency are specific to module (pfla02), not base board\n" ">> (pbab02), it is better to be initialized in corresponding dts file.\n" ">>\n" - ">> Signed-off-by: Dmitry Lavnikevich <d.lavnikevich-H6HfJ9slvY0Aspv4Qr0y0gC/G2K4zDHf@public.gmane.org>\n" + ">> Signed-off-by: Dmitry Lavnikevich <d.lavnikevich@sam-solutions.com>\n" "> I have seen boards use the GPIO_3/6 pads instead of EIM_D17/D18 for\n" "> I2C3, but the EIM_D17/D18 are indeed documented as \"I2C1\" pins at the\n" "> pfla02 connector level.\n" @@ -57,10 +56,6 @@ "Added this into commit message with new patchset.\n" "\n" "Best regards,\n" - "Lavnikevich Dmitry\n" - "--\n" - "To unsubscribe from this list: send the line \"unsubscribe devicetree\" in\n" - "the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org\n" - More majordomo info at http://vger.kernel.org/majordomo-info.html + Lavnikevich Dmitry -e0ac5e39f961f58765b8078ea8ba15107d48ff2868ebb81bd7fb394f6d5c5afb +54b95c2a07081c151fc91affce745bf67138612181bf3e90c51d689acae0b708
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.