* 1.7.1 testpmd hangs system
@ 2014-09-12 23:40 David S. Roth
0 siblings, 0 replies; only message in thread
From: David S. Roth @ 2014-09-12 23:40 UTC (permalink / raw)
To: dev-VfR2kkLFssw
All,
When I execute testpmd as shown below, it runs to the prompt apparently
without error but the system becomes unresponsive and I am forced to reboot.
Any suggestions as to why this is happening?
Thanks in advance,
David
oot@dpdk-26:~/src/C/dpdk-1.7.1/x86_64-native-linuxapp-gcc# app/testpmd
-c f -n 4 -- --portmask=0x1 --nb-cores=2 -i
EAL: Detected lcore 0 as core 0 on socket 0
EAL: Detected lcore 1 as core 1 on socket 0
[...]
EAL: Detected lcore 29 as core 5 on socket 1
EAL: Detected lcore 30 as core 6 on socket 1
EAL: Detected lcore 31 as core 7 on socket 1
EAL: Support maximum 64 logical core(s) by configuration.
EAL: Detected 32 lcore(s)
EAL: Setting up memory...
EAL: Ask a virtual area of 0x100000000 bytes
EAL: Virtual area found at 0x7f6b80000000 (size = 0x100000000)
EAL: Ask a virtual area of 0x100000000 bytes
EAL: Virtual area found at 0x7f6a40000000 (size = 0x100000000)
EAL: Requesting 4 pages of size 1024MB from socket 0
EAL: Requesting 4 pages of size 1024MB from socket 1
EAL: TSC frequency is ~2600000 KHz
EAL: Master core 0 is ready (tid=23fac840)
EAL: Core 3 is ready (tid=210bf700)
EAL: Core 2 is ready (tid=218c0700)
EAL: Core 1 is ready (tid=220c1700)
EAL: PCI device 0000:05:00.0 on NUMA socket 0
EAL: probe driver: 8086:10f8 rte_ixgbe_pmd
EAL: 0000:05:00.0 not managed by VFIO driver, skipping
EAL: PCI memory mapped at 0x7f6d23e6b000
EAL: PCI memory mapped at 0x7f6d23e67000
EAL: PCI device 0000:05:00.1 on NUMA socket 0
EAL: probe driver: 8086:10f8 rte_ixgbe_pmd
EAL: 0000:05:00.1 not managed by VFIO driver, skipping
EAL: PCI memory mapped at 0x7f6d207bf000
EAL: PCI memory mapped at 0x7f6d23e63000
previous number of forwarding ports 2 - changed to number of configured
ports 1
Interactive-mode selected
Configuring Port 0 (socket 0)
Port 0: 38:EA:A7:8B:34:50
Configuring Port 1 (socket 0)
Port 1: 38:EA:A7:8B:34:51
Checking link statuses...
Port 0 Link Up - speed 10000 Mbps - full-duplex
Port 1 Link Up - speed 10000 Mbps - full-duplex
Done
testpmd>
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2014-09-12 23:40 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2014-09-12 23:40 1.7.1 testpmd hangs system David S. Roth
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.