All of lore.kernel.org
 help / color / mirror / Atom feed
* [PATCH] can: at91_can: prepare and unprepare the clock
@ 2014-09-17  9:05 David Dueck
  2014-09-17  9:12   ` Marc Kleine-Budde
  0 siblings, 1 reply; 6+ messages in thread
From: David Dueck @ 2014-09-17  9:05 UTC (permalink / raw)
  To: linux-arm-kernel

This prevents a warning.

Signed-off-by: David Dueck <davidcdueck@googlemail.com>
Signed-off-by: Anthony Harivel <anthony.harivel@emtrion.de>
---
 drivers/net/can/at91_can.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/net/can/at91_can.c b/drivers/net/can/at91_can.c
index f07fa89..7dcb790 100644
--- a/drivers/net/can/at91_can.c
+++ b/drivers/net/can/at91_can.c
@@ -1123,7 +1123,7 @@ static int at91_open(struct net_device *dev)
 	struct at91_priv *priv = netdev_priv(dev);
 	int err;
 
-	clk_enable(priv->clk);
+	clk_prepare_enable(priv->clk);
 
 	/* check or determine and set bittime */
 	err = open_candev(dev);
@@ -1149,7 +1149,7 @@ static int at91_open(struct net_device *dev)
  out_close:
 	close_candev(dev);
  out:
-	clk_disable(priv->clk);
+	clk_disable_unprepare(priv->clk);
 
 	return err;
 }
@@ -1166,7 +1166,7 @@ static int at91_close(struct net_device *dev)
 	at91_chip_stop(dev, CAN_STATE_STOPPED);
 
 	free_irq(dev->irq, dev);
-	clk_disable(priv->clk);
+	clk_disable_unprepare(priv->clk);
 
 	close_candev(dev);
 
-- 
2.1.0

^ permalink raw reply related	[flat|nested] 6+ messages in thread

* [PATCH] can: at91_can: prepare and unprepare the clock
@ 2014-09-17  9:05 David Dueck
  0 siblings, 0 replies; 6+ messages in thread
From: David Dueck @ 2014-09-17  9:05 UTC (permalink / raw)
  To: linux-arm-kernel; +Cc: mkl, wg, nicolas.ferre, Anthony Harivel

This prevents a warning.

Signed-off-by: David Dueck <davidcdueck@googlemail.com>
Signed-off-by: Anthony Harivel <anthony.harivel@emtrion.de>
---
 drivers/net/can/at91_can.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/net/can/at91_can.c b/drivers/net/can/at91_can.c
index f07fa89..7dcb790 100644
--- a/drivers/net/can/at91_can.c
+++ b/drivers/net/can/at91_can.c
@@ -1123,7 +1123,7 @@ static int at91_open(struct net_device *dev)
 	struct at91_priv *priv = netdev_priv(dev);
 	int err;
 
-	clk_enable(priv->clk);
+	clk_prepare_enable(priv->clk);
 
 	/* check or determine and set bittime */
 	err = open_candev(dev);
@@ -1149,7 +1149,7 @@ static int at91_open(struct net_device *dev)
  out_close:
 	close_candev(dev);
  out:
-	clk_disable(priv->clk);
+	clk_disable_unprepare(priv->clk);
 
 	return err;
 }
@@ -1166,7 +1166,7 @@ static int at91_close(struct net_device *dev)
 	at91_chip_stop(dev, CAN_STATE_STOPPED);
 
 	free_irq(dev->irq, dev);
-	clk_disable(priv->clk);
+	clk_disable_unprepare(priv->clk);
 
 	close_candev(dev);
 
-- 
2.1.0



^ permalink raw reply related	[flat|nested] 6+ messages in thread

* Re: [PATCH] can: at91_can: prepare and unprepare the clock
  2014-09-17  9:05 [PATCH] can: at91_can: prepare and unprepare the clock David Dueck
@ 2014-09-17  9:12   ` Marc Kleine-Budde
  0 siblings, 0 replies; 6+ messages in thread
From: Marc Kleine-Budde @ 2014-09-17  9:12 UTC (permalink / raw)
  To: David Dueck, linux-arm-kernel
  Cc: wg, nicolas.ferre, Anthony Harivel, linux-can@vger.kernel.org

[-- Attachment #1: Type: text/plain, Size: 1685 bytes --]

On 09/17/2014 11:05 AM, David Dueck wrote:
> This prevents a warning.

Which warning?

Can you please check the return value of clock_prepare_enbale().

Marc

BTW: Please add linux-can@vger.kernel.org on Cc for CAN related patches.

> Signed-off-by: David Dueck <davidcdueck@googlemail.com>
> Signed-off-by: Anthony Harivel <anthony.harivel@emtrion.de>
> ---
>  drivers/net/can/at91_can.c | 6 +++---
>  1 file changed, 3 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/net/can/at91_can.c b/drivers/net/can/at91_can.c
> index f07fa89..7dcb790 100644
> --- a/drivers/net/can/at91_can.c
> +++ b/drivers/net/can/at91_can.c
> @@ -1123,7 +1123,7 @@ static int at91_open(struct net_device *dev)
>  	struct at91_priv *priv = netdev_priv(dev);
>  	int err;
>  
> -	clk_enable(priv->clk);
> +	clk_prepare_enable(priv->clk);
>  
>  	/* check or determine and set bittime */
>  	err = open_candev(dev);
> @@ -1149,7 +1149,7 @@ static int at91_open(struct net_device *dev)
>   out_close:
>  	close_candev(dev);
>   out:
> -	clk_disable(priv->clk);
> +	clk_disable_unprepare(priv->clk);
>  
>  	return err;
>  }
> @@ -1166,7 +1166,7 @@ static int at91_close(struct net_device *dev)
>  	at91_chip_stop(dev, CAN_STATE_STOPPED);
>  
>  	free_irq(dev->irq, dev);
> -	clk_disable(priv->clk);
> +	clk_disable_unprepare(priv->clk);
>  
>  	close_candev(dev);
>  
> 


-- 
Pengutronix e.K.                  | Marc Kleine-Budde           |
Industrial Linux Solutions        | Phone: +49-231-2826-924     |
Vertretung West/Dortmund          | Fax:   +49-5121-206917-5555 |
Amtsgericht Hildesheim, HRA 2686  | http://www.pengutronix.de   |




[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 181 bytes --]

^ permalink raw reply	[flat|nested] 6+ messages in thread

* [PATCH] can: at91_can: prepare and unprepare the clock
@ 2014-09-17  9:12   ` Marc Kleine-Budde
  0 siblings, 0 replies; 6+ messages in thread
From: Marc Kleine-Budde @ 2014-09-17  9:12 UTC (permalink / raw)
  To: linux-arm-kernel

On 09/17/2014 11:05 AM, David Dueck wrote:
> This prevents a warning.

Which warning?

Can you please check the return value of clock_prepare_enbale().

Marc

BTW: Please add linux-can at vger.kernel.org on Cc for CAN related patches.

> Signed-off-by: David Dueck <davidcdueck@googlemail.com>
> Signed-off-by: Anthony Harivel <anthony.harivel@emtrion.de>
> ---
>  drivers/net/can/at91_can.c | 6 +++---
>  1 file changed, 3 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/net/can/at91_can.c b/drivers/net/can/at91_can.c
> index f07fa89..7dcb790 100644
> --- a/drivers/net/can/at91_can.c
> +++ b/drivers/net/can/at91_can.c
> @@ -1123,7 +1123,7 @@ static int at91_open(struct net_device *dev)
>  	struct at91_priv *priv = netdev_priv(dev);
>  	int err;
>  
> -	clk_enable(priv->clk);
> +	clk_prepare_enable(priv->clk);
>  
>  	/* check or determine and set bittime */
>  	err = open_candev(dev);
> @@ -1149,7 +1149,7 @@ static int at91_open(struct net_device *dev)
>   out_close:
>  	close_candev(dev);
>   out:
> -	clk_disable(priv->clk);
> +	clk_disable_unprepare(priv->clk);
>  
>  	return err;
>  }
> @@ -1166,7 +1166,7 @@ static int at91_close(struct net_device *dev)
>  	at91_chip_stop(dev, CAN_STATE_STOPPED);
>  
>  	free_irq(dev->irq, dev);
> -	clk_disable(priv->clk);
> +	clk_disable_unprepare(priv->clk);
>  
>  	close_candev(dev);
>  
> 


-- 
Pengutronix e.K.                  | Marc Kleine-Budde           |
Industrial Linux Solutions        | Phone: +49-231-2826-924     |
Vertretung West/Dortmund          | Fax:   +49-5121-206917-5555 |
Amtsgericht Hildesheim, HRA 2686  | http://www.pengutronix.de   |



-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 181 bytes
Desc: OpenPGP digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20140917/e395fcfd/attachment-0001.sig>

^ permalink raw reply	[flat|nested] 6+ messages in thread

* Re: [PATCH] can: at91_can: prepare and unprepare the clock
  2014-09-17  9:12   ` Marc Kleine-Budde
@ 2014-09-17 10:11     ` D. Dueck
  -1 siblings, 0 replies; 6+ messages in thread
From: D. Dueck @ 2014-09-17 10:11 UTC (permalink / raw)
  To: Marc Kleine-Budde
  Cc: linux-arm-kernel, wg, nicolas.ferre, Anthony Harivel,
	linux-can@vger.kernel.org

2014-09-17 11:12 GMT+02:00 Marc Kleine-Budde <mkl@pengutronix.de>:

> Which warning?

I will rephrase this. When using COMMON_CLK, for example on sama5d3, we
have to prepare the clock first. I will send v2.

> Can you please check the return value of clock_prepare_enbale().

Yes, sorry I missed that.

David

^ permalink raw reply	[flat|nested] 6+ messages in thread

* [PATCH] can: at91_can: prepare and unprepare the clock
@ 2014-09-17 10:11     ` D. Dueck
  0 siblings, 0 replies; 6+ messages in thread
From: D. Dueck @ 2014-09-17 10:11 UTC (permalink / raw)
  To: linux-arm-kernel

2014-09-17 11:12 GMT+02:00 Marc Kleine-Budde <mkl@pengutronix.de>:

> Which warning?

I will rephrase this. When using COMMON_CLK, for example on sama5d3, we
have to prepare the clock first. I will send v2.

> Can you please check the return value of clock_prepare_enbale().

Yes, sorry I missed that.

David

^ permalink raw reply	[flat|nested] 6+ messages in thread

end of thread, other threads:[~2014-09-17 10:11 UTC | newest]

Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2014-09-17  9:05 [PATCH] can: at91_can: prepare and unprepare the clock David Dueck
2014-09-17  9:12 ` Marc Kleine-Budde
2014-09-17  9:12   ` Marc Kleine-Budde
2014-09-17 10:11   ` D. Dueck
2014-09-17 10:11     ` D. Dueck
  -- strict thread matches above, loose matches on Subject: below --
2014-09-17  9:05 David Dueck

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.