[Qemu-devel] [PATCH v2 0/7] add description field in ObjectProperty and PropertyInfo struct

[Qemu-devel] [PATCH v2 0/7] add description field in ObjectProperty and PropertyInfo struct

[arei.gonglei]

From: Gonglei <arei.gonglei@huawei.com>

PATCH 1 and PATCH 2 are bugfixes. PATCH 3~7 add a description
field in both ObjectProperty and PropertyInfo struct.
The descriptions can serve as documentation in the code,
and they can be used to provide better help. For example:

Before this patch series:

$./qemu-system-x86_64 -device virtio-blk-pci,?

virtio-blk-pci.iothread=link<iothread>
virtio-blk-pci.x-data-plane=bool
virtio-blk-pci.scsi=bool
virtio-blk-pci.config-wce=bool
virtio-blk-pci.serial=str
virtio-blk-pci.secs=uint32
virtio-blk-pci.heads=uint32
virtio-blk-pci.cyls=uint32
virtio-blk-pci.discard_granularity=uint32
virtio-blk-pci.bootindex=int32
virtio-blk-pci.opt_io_size=uint32
virtio-blk-pci.min_io_size=uint16
virtio-blk-pci.physical_block_size=uint16
virtio-blk-pci.logical_block_size=uint16
virtio-blk-pci.drive=str
virtio-blk-pci.virtio-backend=child<virtio-blk-device>
virtio-blk-pci.command_serr_enable=on/off
virtio-blk-pci.multifunction=on/off
virtio-blk-pci.rombar=uint32
virtio-blk-pci.romfile=str
virtio-blk-pci.addr=pci-devfn
virtio-blk-pci.event_idx=on/off
virtio-blk-pci.indirect_desc=on/off
virtio-blk-pci.vectors=uint32
virtio-blk-pci.ioeventfd=on/off
virtio-blk-pci.class=uint32

After:

$./qemu-system-x86_64 -device virtio-blk-pci,?

virtio-blk-pci.iothread=link<iothread>
virtio-blk-pci.x-data-plane=bool (on/off)
virtio-blk-pci.scsi=bool (on/off)
virtio-blk-pci.config-wce=bool (on/off)
virtio-blk-pci.serial=str
virtio-blk-pci.secs=uint32
virtio-blk-pci.heads=uint32
virtio-blk-pci.cyls=uint32
virtio-blk-pci.discard_granularity=uint32
virtio-blk-pci.bootindex=int32
virtio-blk-pci.opt_io_size=uint32
virtio-blk-pci.min_io_size=uint16
virtio-blk-pci.physical_block_size=uint16 (A power of two between 512 and 32768)
virtio-blk-pci.logical_block_size=uint16 (A power of two between 512 and 32768)
virtio-blk-pci.drive=str (ID of a drive to use as a backend)
virtio-blk-pci.virtio-backend=child<virtio-blk-device>
virtio-blk-pci.command_serr_enable=bool (on/off)
virtio-blk-pci.multifunction=bool (on/off)
virtio-blk-pci.rombar=uint32
virtio-blk-pci.romfile=str
virtio-blk-pci.addr=int32 (Slot and function number, example: 06.0)
virtio-blk-pci.event_idx=bool (on/off)
virtio-blk-pci.indirect_desc=bool (on/off)
virtio-blk-pci.vectors=uint32
virtio-blk-pci.ioeventfd=bool (on/off)
virtio-blk-pci.class=uint32

v2 -> v1:
 1. rename "fail" label to "out" in PATCH 1 (Andreas)
 2. improve descriptions in PATCH 3 (Paolo, adding Signed-off-by Paolo in this patch)
 3. rework PATCH 5, set description at qdev_property_add_static(),
    then copy the description of target_obj.property. (Paolo)
 4. free description filed of ObjectProperty avoid memory leak in PATCH 4. 

Thanks for review!


Gonglei (7):
  qom: add error handler for object_property_print()
  qom: add error handler for object alias property
  qdev: add description field in PropertyInfo struct
  qom: add description field in ObjectProperty struct
  qdev: set the object property's description to the qdev property's.
  qmp: print descriptions of object properties
  qdev: drop legacy_name from qdev properties

 hw/core/qdev-properties-system.c |  8 ++++----
 hw/core/qdev-properties.c        | 14 ++++++++------
 hw/core/qdev.c                   |  5 +++++
 include/hw/qdev-core.h           |  2 +-
 include/qom/object.h             | 15 +++++++++++++++
 qmp.c                            | 19 +++++++++++++++----
 qom/object.c                     | 39 ++++++++++++++++++++++++++++++++++++---
 target-ppc/translate_init.c      |  2 +-
 8 files changed, 85 insertions(+), 19 deletions(-)

-- 
1.7.12.4

[Qemu-devel] [PATCH v2 1/7] qom: add error handler for object_property_print()

[arei.gonglei]

From: Gonglei <arei.gonglei@huawei.com>

Avoid the caller of object_property_print() leaking string
argument's memory, such as qdev_print_props() when
encounter errors.

Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
---
 qom/object.c | 12 ++++++++++--
 1 file changed, 10 insertions(+), 2 deletions(-)

diff --git a/qom/object.c b/qom/object.c
index da0919a..21135e1 100644
--- a/qom/object.c
+++ b/qom/object.c
@@ -1010,11 +1010,19 @@ char *object_property_print(Object *obj, const char *name, bool human,
                             Error **errp)
 {
     StringOutputVisitor *mo;
-    char *string;
+    char *string = NULL;
+    Error *local_err = NULL;
 
     mo = string_output_visitor_new(human);
-    object_property_get(obj, string_output_get_visitor(mo), name, errp);
+    object_property_get(obj, string_output_get_visitor(mo), name, &local_err);
+    if (local_err) {
+        error_propagate(errp, local_err);
+        goto out;
+    }
+
     string = string_output_get_string(mo);
+
+out:
     string_output_visitor_cleanup(mo);
     return string;
 }
-- 
1.7.12.4

[Qemu-devel] [PATCH v2 2/7] qom: add error handler for object alias property

[arei.gonglei]

From: Gonglei <arei.gonglei@huawei.com>

object_property_add_alias() is called at some
places at present. And its parameter errp may not NULL,
such as
 object_property_add_alias(obj, "iothread", OBJECT(&dev->vdev),"iothread",
                              &error_abort);
This patch add error handler for security.

Cc: Stefan Hajnoczi <stefanha@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
---
 qom/object.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/qom/object.c b/qom/object.c
index 21135e1..575291f 100644
--- a/qom/object.c
+++ b/qom/object.c
@@ -1642,6 +1642,7 @@ void object_property_add_alias(Object *obj, const char *name,
     ObjectProperty *op;
     ObjectProperty *target_prop;
     gchar *prop_type;
+    Error *local_err = NULL;
 
     target_prop = object_property_find(target_obj, target_name, errp);
     if (!target_prop) {
@@ -1663,9 +1664,15 @@ void object_property_add_alias(Object *obj, const char *name,
                              property_get_alias,
                              property_set_alias,
                              property_release_alias,
-                             prop, errp);
+                             prop, &local_err);
+    if (local_err) {
+        error_propagate(errp, local_err);
+        g_free(prop);
+        goto out;
+    }
     op->resolve = property_resolve_alias;
 
+out:
     g_free(prop_type);
 }
 
-- 
1.7.12.4

[Qemu-devel] [PATCH v2 3/7] qdev: add description field in PropertyInfo struct

[arei.gonglei]

From: Gonglei <arei.gonglei@huawei.com>

The descriptions can serve as documentation in the code,
and they can be used to provide better help.

Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
---
 hw/core/qdev-properties-system.c | 4 ++++
 hw/core/qdev-properties.c        | 8 ++++++++
 include/hw/qdev-core.h           | 1 +
 target-ppc/translate_init.c      | 1 +
 4 files changed, 14 insertions(+)

diff --git a/hw/core/qdev-properties-system.c b/hw/core/qdev-properties-system.c
index 84caa1d..55b6636 100644
--- a/hw/core/qdev-properties-system.c
+++ b/hw/core/qdev-properties-system.c
@@ -113,6 +113,7 @@ static void set_drive(Object *obj, Visitor *v, void *opaque,
 PropertyInfo qdev_prop_drive = {
     .name  = "str",
     .legacy_name  = "drive",
+    .description = "ID of a drive to use as a backend",
     .get   = get_drive,
     .set   = set_drive,
     .release = release_drive,
@@ -170,6 +171,7 @@ static void set_chr(Object *obj, Visitor *v, void *opaque,
 PropertyInfo qdev_prop_chr = {
     .name  = "str",
     .legacy_name  = "chr",
+    .description = "ID of a chardev to use as a backend",
     .get   = get_chr,
     .set   = set_chr,
     .release = release_chr,
@@ -249,6 +251,7 @@ static void set_netdev(Object *obj, Visitor *v, void *opaque,
 PropertyInfo qdev_prop_netdev = {
     .name  = "str",
     .legacy_name  = "netdev",
+    .description = "ID of a netdev to use as a backend",
     .get   = get_netdev,
     .set   = set_netdev,
 };
@@ -329,6 +332,7 @@ static void set_vlan(Object *obj, Visitor *v, void *opaque,
 PropertyInfo qdev_prop_vlan = {
     .name  = "int32",
     .legacy_name  = "vlan",
+    .description = "Integer VLAN id to connect to",
     .print = print_vlan,
     .get   = get_vlan,
     .set   = set_vlan,
diff --git a/hw/core/qdev-properties.c b/hw/core/qdev-properties.c
index 66556d3..a853ac9 100644
--- a/hw/core/qdev-properties.c
+++ b/hw/core/qdev-properties.c
@@ -121,6 +121,7 @@ static void prop_set_bit(Object *obj, Visitor *v, void *opaque,
 PropertyInfo qdev_prop_bit = {
     .name  = "bool",
     .legacy_name  = "on/off",
+    .description = "on/off",
     .get   = prop_get_bit,
     .set   = prop_set_bit,
 };
@@ -456,6 +457,7 @@ inval:
 PropertyInfo qdev_prop_macaddr = {
     .name  = "str",
     .legacy_name  = "macaddr",
+    .description = "Ethernet 6-byte MAC Address, example: 52:54:00:12:34:56",
     .get   = get_mac,
     .set   = set_mac,
 };
@@ -478,6 +480,8 @@ QEMU_BUILD_BUG_ON(sizeof(BiosAtaTranslation) != sizeof(int));
 PropertyInfo qdev_prop_bios_chs_trans = {
     .name = "BiosAtaTranslation",
     .legacy_name = "bios-chs-trans",
+    .description = "Logical CHS translation algorithm, "
+                   "auto/none/lba/large/rechs",
     .enum_table = BiosAtaTranslation_lookup,
     .get = get_enum,
     .set = set_enum,
@@ -552,6 +556,7 @@ static int print_pci_devfn(DeviceState *dev, Property *prop, char *dest,
 PropertyInfo qdev_prop_pci_devfn = {
     .name  = "int32",
     .legacy_name  = "pci-devfn",
+    .description = "Slot and function number, example: 06.0",
     .print = print_pci_devfn,
     .get   = get_int32,
     .set   = set_pci_devfn,
@@ -599,6 +604,7 @@ static void set_blocksize(Object *obj, Visitor *v, void *opaque,
 PropertyInfo qdev_prop_blocksize = {
     .name  = "uint16",
     .legacy_name  = "blocksize",
+    .description = "A power of two between 512 and 32768",
     .get   = get_uint16,
     .set   = set_blocksize,
 };
@@ -707,6 +713,8 @@ inval:
 PropertyInfo qdev_prop_pci_host_devaddr = {
     .name = "str",
     .legacy_name = "pci-host-devaddr",
+    .description = "Address (bus/device/function) of "
+                   "the host device, example: 04:10.0",
     .get = get_pci_host_devaddr,
     .set = set_pci_host_devaddr,
 };
diff --git a/include/hw/qdev-core.h b/include/hw/qdev-core.h
index 178fee2..31acbe6 100644
--- a/include/hw/qdev-core.h
+++ b/include/hw/qdev-core.h
@@ -233,6 +233,7 @@ struct Property {
 struct PropertyInfo {
     const char *name;
     const char *legacy_name;
+    const char *description;
     const char **enum_table;
     int (*print)(DeviceState *dev, Property *prop, char *dest, size_t len);
     ObjectPropertyAccessor *get;
diff --git a/target-ppc/translate_init.c b/target-ppc/translate_init.c
index 48177ed..21b7a1e 100644
--- a/target-ppc/translate_init.c
+++ b/target-ppc/translate_init.c
@@ -8045,6 +8045,7 @@ static void powerpc_set_compat(Object *obj, Visitor *v,
 static PropertyInfo powerpc_compat_propinfo = {
     .name = "str",
     .legacy_name = "powerpc-server-compat",
+    .description = "compatibility mode, power6/power7/power8",
     .get = powerpc_get_compat,
     .set = powerpc_set_compat,
 };
-- 
1.7.12.4

[Qemu-devel] [PATCH v2 4/7] qom: add description field in ObjectProperty struct

[arei.gonglei]

From: Gonglei <arei.gonglei@huawei.com>

The descriptions can serve as documentation in the code,
and they can be used to provide better help.

Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
---
 include/qom/object.h | 15 +++++++++++++++
 qom/object.c         | 14 ++++++++++++++
 2 files changed, 29 insertions(+)

diff --git a/include/qom/object.h b/include/qom/object.h
index 8a05a81..ddc600d 100644
--- a/include/qom/object.h
+++ b/include/qom/object.h
@@ -338,6 +338,7 @@ typedef struct ObjectProperty
 {
     gchar *name;
     gchar *type;
+    gchar *description;
     ObjectPropertyAccessor *get;
     ObjectPropertyAccessor *set;
     ObjectPropertyResolve *resolve;
@@ -1274,6 +1275,20 @@ void object_property_add_alias(Object *obj, const char *name,
                                Object *target_obj, const char *target_name,
                                Error **errp);
 
+
+/**
+ * object_property_set_description:
+ * @obj: the object to set a property's description to
+ * @name: the name of the property
+ * @description: the description of the property on the object
+ * @errp: if an error occurs, a pointer to an area to store the error
+ *
+ * Set an object property's description.
+ *
+ */
+void object_property_set_description(Object *obj, const char *name,
+                                     const char *description, Error **errp);
+
 /**
  * object_child_foreach:
  * @obj: the object whose children will be navigated
diff --git a/qom/object.c b/qom/object.c
index 575291f..c9b67cf 100644
--- a/qom/object.c
+++ b/qom/object.c
@@ -369,6 +369,7 @@ static void object_property_del_all(Object *obj)
 
         g_free(prop->name);
         g_free(prop->type);
+        g_free(prop->description);
         g_free(prop);
     }
 }
@@ -803,6 +804,7 @@ void object_property_del(Object *obj, const char *name, Error **errp)
 
     g_free(prop->name);
     g_free(prop->type);
+    g_free(prop->description);
     g_free(prop);
 }
 
@@ -1676,6 +1678,18 @@ out:
     g_free(prop_type);
 }
 
+void object_property_set_description(Object *obj, const char *name,
+                                     const char *description, Error **errp)
+{
+    ObjectProperty *op;
+
+    op = object_property_find(obj, name, errp);
+    if (!op) {
+        return;
+    }
+    op->description = description ? g_strdup(description) : NULL;
+}
+
 static void object_instance_init(Object *obj)
 {
     object_property_add_str(obj, "type", qdev_get_type, NULL, NULL);
-- 
1.7.12.4

[Qemu-devel] [PATCH v2 5/7] qdev: set the object property's description to the qdev property's.

[arei.gonglei]

From: Gonglei <arei.gonglei@huawei.com>

Set all static qdev properties' descriptions to object property's
description.

When we call object_property_add_alias() adding alias properties to
the source object on the target Object, set the object property's
description to the source qdev property's.

c: Paolo Bonzini <pbonzini@redhat.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
---
 hw/core/qdev.c | 5 +++++
 qom/object.c   | 4 ++++
 2 files changed, 9 insertions(+)

diff --git a/hw/core/qdev.c b/hw/core/qdev.c
index fcb1638..a270a91 100644
--- a/hw/core/qdev.c
+++ b/hw/core/qdev.c
@@ -766,6 +766,11 @@ void qdev_property_add_static(DeviceState *dev, Property *prop,
         error_propagate(errp, local_err);
         return;
     }
+
+    object_property_set_description(obj, prop->name,
+                                    prop->info->description,
+                                    &error_abort);
+
     if (prop->qtype == QTYPE_NONE) {
         return;
     }
diff --git a/qom/object.c b/qom/object.c
index c9b67cf..56ace2f 100644
--- a/qom/object.c
+++ b/qom/object.c
@@ -1674,6 +1674,10 @@ void object_property_add_alias(Object *obj, const char *name,
     }
     op->resolve = property_resolve_alias;
 
+    object_property_set_description(obj, name,
+                                    target_prop->description,
+                                    &error_abort);
+
 out:
     g_free(prop_type);
 }
-- 
1.7.12.4

[Qemu-devel] [PATCH v2 6/7] qmp: print descriptions of object properties

[arei.gonglei]

From: Gonglei <arei.gonglei@huawei.com>

The descriptions can serve as documentation in the code,
and they can be used to provide better help. For example:

$./qemu-system-x86_64 -device virtio-blk-pci,?

Before this patch:

virtio-blk-pci.iothread=link<iothread>
virtio-blk-pci.x-data-plane=bool
virtio-blk-pci.scsi=bool
virtio-blk-pci.config-wce=bool
virtio-blk-pci.serial=str
virtio-blk-pci.secs=uint32
virtio-blk-pci.heads=uint32
virtio-blk-pci.cyls=uint32
virtio-blk-pci.discard_granularity=uint32
virtio-blk-pci.bootindex=int32
virtio-blk-pci.opt_io_size=uint32
virtio-blk-pci.min_io_size=uint16
virtio-blk-pci.physical_block_size=uint16
virtio-blk-pci.logical_block_size=uint16
virtio-blk-pci.drive=str
virtio-blk-pci.virtio-backend=child<virtio-blk-device>
virtio-blk-pci.command_serr_enable=on/off
virtio-blk-pci.multifunction=on/off
virtio-blk-pci.rombar=uint32
virtio-blk-pci.romfile=str
virtio-blk-pci.addr=pci-devfn
virtio-blk-pci.event_idx=on/off
virtio-blk-pci.indirect_desc=on/off
virtio-blk-pci.vectors=uint32
virtio-blk-pci.ioeventfd=on/off
virtio-blk-pci.class=uint32

After:

virtio-blk-pci.iothread=link<iothread>
virtio-blk-pci.x-data-plane=bool (on/off)
virtio-blk-pci.scsi=bool (on/off)
virtio-blk-pci.config-wce=bool (on/off)
virtio-blk-pci.serial=str
virtio-blk-pci.secs=uint32
virtio-blk-pci.heads=uint32
virtio-blk-pci.cyls=uint32
virtio-blk-pci.discard_granularity=uint32
virtio-blk-pci.bootindex=int32
virtio-blk-pci.opt_io_size=uint32
virtio-blk-pci.min_io_size=uint16
virtio-blk-pci.physical_block_size=uint16 (A power of two between 512 and 32768)
virtio-blk-pci.logical_block_size=uint16 (A power of two between 512 and 32768)
virtio-blk-pci.drive=str (ID of a drive to use as a backend)
virtio-blk-pci.virtio-backend=child<virtio-blk-device>
virtio-blk-pci.command_serr_enable=bool (on/off)
virtio-blk-pci.multifunction=bool (on/off)
virtio-blk-pci.rombar=uint32
virtio-blk-pci.romfile=str
virtio-blk-pci.addr=int32 (Slot and function number, example: 06.0)
virtio-blk-pci.event_idx=bool (on/off)
virtio-blk-pci.indirect_desc=bool (on/off)
virtio-blk-pci.vectors=uint32
virtio-blk-pci.ioeventfd=bool (on/off)
virtio-blk-pci.class=uint32

Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
---
 qmp.c | 19 +++++++++++++++----
 1 file changed, 15 insertions(+), 4 deletions(-)

diff --git a/qmp.c b/qmp.c
index c6767c4..20f501b 100644
--- a/qmp.c
+++ b/qmp.c
@@ -442,7 +442,8 @@ ObjectTypeInfoList *qmp_qom_list_types(bool has_implements,
  */
 static DevicePropertyInfo *make_device_property_info(ObjectClass *klass,
                                                      const char *name,
-                                                     const char *default_type)
+                                                     const char *default_type,
+                                                     const char *description)
 {
     DevicePropertyInfo *info;
     Property *prop;
@@ -465,7 +466,12 @@ static DevicePropertyInfo *make_device_property_info(ObjectClass *klass,
 
             info = g_malloc0(sizeof(*info));
             info->name = g_strdup(prop->name);
-            info->type = g_strdup(prop->info->legacy_name ?: prop->info->name);
+            if (prop->info->description) {
+                info->type = g_strdup_printf("%s (%s)", prop->info->name,
+                                             prop->info->description);
+            } else {
+                info->type = g_strdup(prop->info->name);
+            }
             return info;
         }
         klass = object_class_get_parent(klass);
@@ -474,7 +480,11 @@ static DevicePropertyInfo *make_device_property_info(ObjectClass *klass,
     /* Not a qdev property, use the default type */
     info = g_malloc0(sizeof(*info));
     info->name = g_strdup(name);
-    info->type = g_strdup(default_type);
+    if (description) {
+        info->type = g_strdup_printf("%s (%s)", default_type, description);
+    } else {
+        info->type = g_strdup(default_type);
+    }
     return info;
 }
 
@@ -521,7 +531,8 @@ DevicePropertyInfoList *qmp_device_list_properties(const char *typename,
             continue;
         }
 
-        info = make_device_property_info(klass, prop->name, prop->type);
+        info = make_device_property_info(klass, prop->name, prop->type,
+                                         prop->description);
         if (!info) {
             continue;
         }
-- 
1.7.12.4

[Qemu-devel] [PATCH v2 7/7] qdev: drop legacy_name from qdev properties

[arei.gonglei]

From: Gonglei <arei.gonglei@huawei.com>

The legacy_name is useless now, the better help
information provied by description field of property.

Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
---
 hw/core/qdev-properties-system.c | 4 ----
 hw/core/qdev-properties.c        | 6 ------
 include/hw/qdev-core.h           | 1 -
 target-ppc/translate_init.c      | 1 -
 4 files changed, 12 deletions(-)

diff --git a/hw/core/qdev-properties-system.c b/hw/core/qdev-properties-system.c
index 55b6636..f2bd954 100644
--- a/hw/core/qdev-properties-system.c
+++ b/hw/core/qdev-properties-system.c
@@ -112,7 +112,6 @@ static void set_drive(Object *obj, Visitor *v, void *opaque,
 
 PropertyInfo qdev_prop_drive = {
     .name  = "str",
-    .legacy_name  = "drive",
     .description = "ID of a drive to use as a backend",
     .get   = get_drive,
     .set   = set_drive,
@@ -170,7 +169,6 @@ static void set_chr(Object *obj, Visitor *v, void *opaque,
 
 PropertyInfo qdev_prop_chr = {
     .name  = "str",
-    .legacy_name  = "chr",
     .description = "ID of a chardev to use as a backend",
     .get   = get_chr,
     .set   = set_chr,
@@ -250,7 +248,6 @@ static void set_netdev(Object *obj, Visitor *v, void *opaque,
 
 PropertyInfo qdev_prop_netdev = {
     .name  = "str",
-    .legacy_name  = "netdev",
     .description = "ID of a netdev to use as a backend",
     .get   = get_netdev,
     .set   = set_netdev,
@@ -331,7 +328,6 @@ static void set_vlan(Object *obj, Visitor *v, void *opaque,
 
 PropertyInfo qdev_prop_vlan = {
     .name  = "int32",
-    .legacy_name  = "vlan",
     .description = "Integer VLAN id to connect to",
     .print = print_vlan,
     .get   = get_vlan,
diff --git a/hw/core/qdev-properties.c b/hw/core/qdev-properties.c
index a853ac9..5c85db1 100644
--- a/hw/core/qdev-properties.c
+++ b/hw/core/qdev-properties.c
@@ -120,7 +120,6 @@ static void prop_set_bit(Object *obj, Visitor *v, void *opaque,
 
 PropertyInfo qdev_prop_bit = {
     .name  = "bool",
-    .legacy_name  = "on/off",
     .description = "on/off",
     .get   = prop_get_bit,
     .set   = prop_set_bit,
@@ -456,7 +455,6 @@ inval:
 
 PropertyInfo qdev_prop_macaddr = {
     .name  = "str",
-    .legacy_name  = "macaddr",
     .description = "Ethernet 6-byte MAC Address, example: 52:54:00:12:34:56",
     .get   = get_mac,
     .set   = set_mac,
@@ -479,7 +477,6 @@ QEMU_BUILD_BUG_ON(sizeof(BiosAtaTranslation) != sizeof(int));
 
 PropertyInfo qdev_prop_bios_chs_trans = {
     .name = "BiosAtaTranslation",
-    .legacy_name = "bios-chs-trans",
     .description = "Logical CHS translation algorithm, "
                    "auto/none/lba/large/rechs",
     .enum_table = BiosAtaTranslation_lookup,
@@ -555,7 +552,6 @@ static int print_pci_devfn(DeviceState *dev, Property *prop, char *dest,
 
 PropertyInfo qdev_prop_pci_devfn = {
     .name  = "int32",
-    .legacy_name  = "pci-devfn",
     .description = "Slot and function number, example: 06.0",
     .print = print_pci_devfn,
     .get   = get_int32,
@@ -603,7 +599,6 @@ static void set_blocksize(Object *obj, Visitor *v, void *opaque,
 
 PropertyInfo qdev_prop_blocksize = {
     .name  = "uint16",
-    .legacy_name  = "blocksize",
     .description = "A power of two between 512 and 32768",
     .get   = get_uint16,
     .set   = set_blocksize,
@@ -712,7 +707,6 @@ inval:
 
 PropertyInfo qdev_prop_pci_host_devaddr = {
     .name = "str",
-    .legacy_name = "pci-host-devaddr",
     .description = "Address (bus/device/function) of "
                    "the host device, example: 04:10.0",
     .get = get_pci_host_devaddr,
diff --git a/include/hw/qdev-core.h b/include/hw/qdev-core.h
index 31acbe6..7fcd415 100644
--- a/include/hw/qdev-core.h
+++ b/include/hw/qdev-core.h
@@ -232,7 +232,6 @@ struct Property {
 
 struct PropertyInfo {
     const char *name;
-    const char *legacy_name;
     const char *description;
     const char **enum_table;
     int (*print)(DeviceState *dev, Property *prop, char *dest, size_t len);
diff --git a/target-ppc/translate_init.c b/target-ppc/translate_init.c
index 21b7a1e..061fbb1 100644
--- a/target-ppc/translate_init.c
+++ b/target-ppc/translate_init.c
@@ -8044,7 +8044,6 @@ static void powerpc_set_compat(Object *obj, Visitor *v,
 
 static PropertyInfo powerpc_compat_propinfo = {
     .name = "str",
-    .legacy_name = "powerpc-server-compat",
     .description = "compatibility mode, power6/power7/power8",
     .get = powerpc_get_compat,
     .set = powerpc_set_compat,
-- 
1.7.12.4

Re: [Qemu-devel] [PATCH v2 6/7] qmp: print descriptions of object properties

[Paolo Bonzini]

Il 25/09/2014 04:04, arei.gonglei@huawei.com ha scritto:
> From: Gonglei <arei.gonglei@huawei.com>
> 
> The descriptions can serve as documentation in the code,
> and they can be used to provide better help. For example:
> 
> $./qemu-system-x86_64 -device virtio-blk-pci,?
> 
> Before this patch:
> 
> virtio-blk-pci.iothread=link<iothread>
> virtio-blk-pci.x-data-plane=bool
> virtio-blk-pci.scsi=bool
> virtio-blk-pci.config-wce=bool
> virtio-blk-pci.serial=str
> virtio-blk-pci.secs=uint32
> virtio-blk-pci.heads=uint32
> virtio-blk-pci.cyls=uint32
> virtio-blk-pci.discard_granularity=uint32
> virtio-blk-pci.bootindex=int32
> virtio-blk-pci.opt_io_size=uint32
> virtio-blk-pci.min_io_size=uint16
> virtio-blk-pci.physical_block_size=uint16
> virtio-blk-pci.logical_block_size=uint16
> virtio-blk-pci.drive=str
> virtio-blk-pci.virtio-backend=child<virtio-blk-device>
> virtio-blk-pci.command_serr_enable=on/off
> virtio-blk-pci.multifunction=on/off
> virtio-blk-pci.rombar=uint32
> virtio-blk-pci.romfile=str
> virtio-blk-pci.addr=pci-devfn
> virtio-blk-pci.event_idx=on/off
> virtio-blk-pci.indirect_desc=on/off
> virtio-blk-pci.vectors=uint32
> virtio-blk-pci.ioeventfd=on/off
> virtio-blk-pci.class=uint32
> 
> After:
> 
> virtio-blk-pci.iothread=link<iothread>
> virtio-blk-pci.x-data-plane=bool (on/off)
> virtio-blk-pci.scsi=bool (on/off)
> virtio-blk-pci.config-wce=bool (on/off)
> virtio-blk-pci.serial=str
> virtio-blk-pci.secs=uint32
> virtio-blk-pci.heads=uint32
> virtio-blk-pci.cyls=uint32
> virtio-blk-pci.discard_granularity=uint32
> virtio-blk-pci.bootindex=int32
> virtio-blk-pci.opt_io_size=uint32
> virtio-blk-pci.min_io_size=uint16
> virtio-blk-pci.physical_block_size=uint16 (A power of two between 512 and 32768)
> virtio-blk-pci.logical_block_size=uint16 (A power of two between 512 and 32768)
> virtio-blk-pci.drive=str (ID of a drive to use as a backend)
> virtio-blk-pci.virtio-backend=child<virtio-blk-device>
> virtio-blk-pci.command_serr_enable=bool (on/off)
> virtio-blk-pci.multifunction=bool (on/off)
> virtio-blk-pci.rombar=uint32
> virtio-blk-pci.romfile=str
> virtio-blk-pci.addr=int32 (Slot and function number, example: 06.0)
> virtio-blk-pci.event_idx=bool (on/off)
> virtio-blk-pci.indirect_desc=bool (on/off)
> virtio-blk-pci.vectors=uint32
> virtio-blk-pci.ioeventfd=bool (on/off)
> virtio-blk-pci.class=uint32
> 
> Cc: Paolo Bonzini <pbonzini@redhat.com>
> Cc: Michael S. Tsirkin <mst@redhat.com>
> Cc: Markus Armbruster <armbru@redhat.com>
> Signed-off-by: Gonglei <arei.gonglei@huawei.com>
> ---
>  qmp.c | 19 +++++++++++++++----
>  1 file changed, 15 insertions(+), 4 deletions(-)
> 
> diff --git a/qmp.c b/qmp.c
> index c6767c4..20f501b 100644
> --- a/qmp.c
> +++ b/qmp.c
> @@ -442,7 +442,8 @@ ObjectTypeInfoList *qmp_qom_list_types(bool has_implements,
>   */
>  static DevicePropertyInfo *make_device_property_info(ObjectClass *klass,
>                                                       const char *name,
> -                                                     const char *default_type)
> +                                                     const char *default_type,
> +                                                     const char *description)
>  {
>      DevicePropertyInfo *info;
>      Property *prop;
> @@ -465,7 +466,12 @@ static DevicePropertyInfo *make_device_property_info(ObjectClass *klass,
>  
>              info = g_malloc0(sizeof(*info));
>              info->name = g_strdup(prop->name);
> -            info->type = g_strdup(prop->info->legacy_name ?: prop->info->name);
> +            if (prop->info->description) {
> +                info->type = g_strdup_printf("%s (%s)", prop->info->name,
> +                                             prop->info->description);
> +            } else {
> +                info->type = g_strdup(prop->info->name);
> +            }
>              return info;
>          }
>          klass = object_class_get_parent(klass);
> @@ -474,7 +480,11 @@ static DevicePropertyInfo *make_device_property_info(ObjectClass *klass,
>      /* Not a qdev property, use the default type */
>      info = g_malloc0(sizeof(*info));
>      info->name = g_strdup(name);
> -    info->type = g_strdup(default_type);
> +    if (description) {
> +        info->type = g_strdup_printf("%s (%s)", default_type, description);

Please add a new "description" field to DevicePropertyInfo, and format
it in qdev_device_help.

You can send v3 of just this patch.

Thanks,

Paolo

> +    } else {
> +        info->type = g_strdup(default_type);
> +    }
>      return info;
>  }
>  
> @@ -521,7 +531,8 @@ DevicePropertyInfoList *qmp_device_list_properties(const char *typename,
>              continue;
>          }
>  
> -        info = make_device_property_info(klass, prop->name, prop->type);
> +        info = make_device_property_info(klass, prop->name, prop->type,
> +                                         prop->description);
>          if (!info) {
>              continue;
>          }
> 

Re: [Qemu-devel] [PATCH v2 6/7] qmp: print descriptions of object properties

[Gonglei]

Hi, Paolo

> >  static DevicePropertyInfo *make_device_property_info(ObjectClass *klass,
> >                                                       const
> char *name,
> > -                                                     const char
> *default_type)
> > +                                                     const char
> *default_type,
> > +                                                     const char
> *description)
> >  {
> >      DevicePropertyInfo *info;
> >      Property *prop;
> > @@ -465,7 +466,12 @@ static DevicePropertyInfo
> *make_device_property_info(ObjectClass *klass,
> >
> >              info = g_malloc0(sizeof(*info));
> >              info->name = g_strdup(prop->name);
> > -            info->type = g_strdup(prop->info->legacy_name ?:
> prop->info->name);
> > +            if (prop->info->description) {
> > +                info->type = g_strdup_printf("%s (%s)",
> prop->info->name,
> > +
> prop->info->description);
> > +            } else {
> > +                info->type = g_strdup(prop->info->name);
> > +            }
> >              return info;
> >          }
> >          klass = object_class_get_parent(klass);
> > @@ -474,7 +480,11 @@ static DevicePropertyInfo
> *make_device_property_info(ObjectClass *klass,
> >      /* Not a qdev property, use the default type */
> >      info = g_malloc0(sizeof(*info));
> >      info->name = g_strdup(name);
> > -    info->type = g_strdup(default_type);
> > +    if (description) {
> > +        info->type = g_strdup_printf("%s (%s)", default_type, description);
> 
> Please add a new "description" field to DevicePropertyInfo, and format
> it in qdev_device_help.
> 
> You can send v3 of just this patch.
> 
OK, will do it. Thanks! :)

Best regards,
-Gonglei