From: Tim Bird <tim.bird@sonymobile.com>
To: Kumar Gala <galak@codeaurora.org>
Cc: Bjorn Andersson <Bjorn.Andersson@sonymobile.com>,
Kevin Hilman <khilman@linaro.org>,
"linux-arm-msm@vger.kernel.org" <linux-arm-msm@vger.kernel.org>,
devicetree@vger.kernel.org,
"linux-arm-kernel@lists.infradead.org"
<linux-arm-kernel@lists.infradead.org>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>
Subject: [PATCH v3] ARM: dts: Add initial DTS file for Sony Xperia Z1 phone
Date: Tue, 30 Sep 2014 15:49:49 -0700 [thread overview]
Message-ID: <542B338D.2040909@sonymobile.com> (raw)
This DTS has support for the Sony Xperia Z1 phone (codenamed Honami).
This first version of the DTS supports just a serial console.
changes from V2
- fixed dtb name in Makefile
changes from v1
- removed qcom,msm-id attribute
- removed mis-capitalized Qualcomm word
- changed dts file name
- added board-specific compatible-string
Signed-off-by: Tim Bird <tim.bird@sonymobile.com>
Tested-by: Kevin Hilman <khilman@linaro.org>
---
This version fixes the dtb name. I asked previously about adding to qcom_dt_match,
but apparently board compatibles are being removed from that list in
mach_qcom/board.c
See https://lkml.org/lkml/2014/9/24/952
Kevin tested this (modulu re-adding back the qcom,msm-id). I have a new
mkqcdtbootimg which works without requiring the qcom,msm-id attribute,
that I'll send to Kevin shortly (and publish on github).
Documentation/devicetree/bindings/vendor-prefixes.txt | 1 +
arch/arm/boot/dts/Makefile | 3 ++-
arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts | 17 +++++++++++++++++
3 files changed, 20 insertions(+), 1 deletion(-)
create mode 100644 arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index ac7269f..d3a4579 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -128,6 +128,7 @@ sirf SiRF Technology, Inc.
smsc Standard Microsystems Corporation
snps Synopsys, Inc.
solidrun SolidRun
+sony Sony Corporation
spansion Spansion Inc.
st STMicroelectronics
ste ST-Ericsson
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index b8c5cd3..cf58321 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -343,7 +343,8 @@ dtb-$(CONFIG_ARCH_QCOM) += \
qcom-apq8074-dragonboard.dtb \
qcom-apq8084-mtp.dtb \
qcom-msm8660-surf.dtb \
- qcom-msm8960-cdp.dtb
+ qcom-msm8960-cdp.dtb \
+ qcom-msm8974-sony-xperia-honami.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += \
rk3066a-bqcurie2.dtb \
rk3188-radxarock.dtb \
diff --git a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts
new file mode 100644
index 0000000..cccc21b
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts
@@ -0,0 +1,17 @@
+#include "qcom-msm8974.dtsi"
+
+/ {
+ model = "Sony Xperia Z1";
+ compatible = "sony,xperia-honami", "qcom,msm8974";
+
+ memory@0 {
+ reg = <0 0x40000000>, <0x40000000 0x40000000>;
+ device_type = "memory";
+ };
+};
+
+&soc {
+ serial@f991e000 {
+ status = "ok";
+ };
+};
--
1.8.2.2
WARNING: multiple messages have this Message-ID (diff)
From: tim.bird@sonymobile.com (Tim Bird)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3] ARM: dts: Add initial DTS file for Sony Xperia Z1 phone
Date: Tue, 30 Sep 2014 15:49:49 -0700 [thread overview]
Message-ID: <542B338D.2040909@sonymobile.com> (raw)
This DTS has support for the Sony Xperia Z1 phone (codenamed Honami).
This first version of the DTS supports just a serial console.
changes from V2
- fixed dtb name in Makefile
changes from v1
- removed qcom,msm-id attribute
- removed mis-capitalized Qualcomm word
- changed dts file name
- added board-specific compatible-string
Signed-off-by: Tim Bird <tim.bird@sonymobile.com>
Tested-by: Kevin Hilman <khilman@linaro.org>
---
This version fixes the dtb name. I asked previously about adding to qcom_dt_match,
but apparently board compatibles are being removed from that list in
mach_qcom/board.c
See https://lkml.org/lkml/2014/9/24/952
Kevin tested this (modulu re-adding back the qcom,msm-id). I have a new
mkqcdtbootimg which works without requiring the qcom,msm-id attribute,
that I'll send to Kevin shortly (and publish on github).
Documentation/devicetree/bindings/vendor-prefixes.txt | 1 +
arch/arm/boot/dts/Makefile | 3 ++-
arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts | 17 +++++++++++++++++
3 files changed, 20 insertions(+), 1 deletion(-)
create mode 100644 arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index ac7269f..d3a4579 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -128,6 +128,7 @@ sirf SiRF Technology, Inc.
smsc Standard Microsystems Corporation
snps Synopsys, Inc.
solidrun SolidRun
+sony Sony Corporation
spansion Spansion Inc.
st STMicroelectronics
ste ST-Ericsson
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index b8c5cd3..cf58321 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -343,7 +343,8 @@ dtb-$(CONFIG_ARCH_QCOM) += \
qcom-apq8074-dragonboard.dtb \
qcom-apq8084-mtp.dtb \
qcom-msm8660-surf.dtb \
- qcom-msm8960-cdp.dtb
+ qcom-msm8960-cdp.dtb \
+ qcom-msm8974-sony-xperia-honami.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += \
rk3066a-bqcurie2.dtb \
rk3188-radxarock.dtb \
diff --git a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts
new file mode 100644
index 0000000..cccc21b
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts
@@ -0,0 +1,17 @@
+#include "qcom-msm8974.dtsi"
+
+/ {
+ model = "Sony Xperia Z1";
+ compatible = "sony,xperia-honami", "qcom,msm8974";
+
+ memory at 0 {
+ reg = <0 0x40000000>, <0x40000000 0x40000000>;
+ device_type = "memory";
+ };
+};
+
+&soc {
+ serial at f991e000 {
+ status = "ok";
+ };
+};
--
1.8.2.2
WARNING: multiple messages have this Message-ID (diff)
From: Tim Bird <tim.bird@sonymobile.com>
To: Kumar Gala <galak@codeaurora.org>
Cc: Bjorn Andersson <Bjorn.Andersson@sonymobile.com>,
Kevin Hilman <khilman@linaro.org>,
"linux-arm-msm@vger.kernel.org" <linux-arm-msm@vger.kernel.org>,
<devicetree@vger.kernel.org>,
"linux-arm-kernel@lists.infradead.org"
<linux-arm-kernel@lists.infradead.org>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>
Subject: [PATCH v3] ARM: dts: Add initial DTS file for Sony Xperia Z1 phone
Date: Tue, 30 Sep 2014 15:49:49 -0700 [thread overview]
Message-ID: <542B338D.2040909@sonymobile.com> (raw)
This DTS has support for the Sony Xperia Z1 phone (codenamed Honami).
This first version of the DTS supports just a serial console.
changes from V2
- fixed dtb name in Makefile
changes from v1
- removed qcom,msm-id attribute
- removed mis-capitalized Qualcomm word
- changed dts file name
- added board-specific compatible-string
Signed-off-by: Tim Bird <tim.bird@sonymobile.com>
Tested-by: Kevin Hilman <khilman@linaro.org>
---
This version fixes the dtb name. I asked previously about adding to qcom_dt_match,
but apparently board compatibles are being removed from that list in
mach_qcom/board.c
See https://lkml.org/lkml/2014/9/24/952
Kevin tested this (modulu re-adding back the qcom,msm-id). I have a new
mkqcdtbootimg which works without requiring the qcom,msm-id attribute,
that I'll send to Kevin shortly (and publish on github).
Documentation/devicetree/bindings/vendor-prefixes.txt | 1 +
arch/arm/boot/dts/Makefile | 3 ++-
arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts | 17 +++++++++++++++++
3 files changed, 20 insertions(+), 1 deletion(-)
create mode 100644 arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index ac7269f..d3a4579 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -128,6 +128,7 @@ sirf SiRF Technology, Inc.
smsc Standard Microsystems Corporation
snps Synopsys, Inc.
solidrun SolidRun
+sony Sony Corporation
spansion Spansion Inc.
st STMicroelectronics
ste ST-Ericsson
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index b8c5cd3..cf58321 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -343,7 +343,8 @@ dtb-$(CONFIG_ARCH_QCOM) += \
qcom-apq8074-dragonboard.dtb \
qcom-apq8084-mtp.dtb \
qcom-msm8660-surf.dtb \
- qcom-msm8960-cdp.dtb
+ qcom-msm8960-cdp.dtb \
+ qcom-msm8974-sony-xperia-honami.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += \
rk3066a-bqcurie2.dtb \
rk3188-radxarock.dtb \
diff --git a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts
new file mode 100644
index 0000000..cccc21b
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts
@@ -0,0 +1,17 @@
+#include "qcom-msm8974.dtsi"
+
+/ {
+ model = "Sony Xperia Z1";
+ compatible = "sony,xperia-honami", "qcom,msm8974";
+
+ memory@0 {
+ reg = <0 0x40000000>, <0x40000000 0x40000000>;
+ device_type = "memory";
+ };
+};
+
+&soc {
+ serial@f991e000 {
+ status = "ok";
+ };
+};
--
1.8.2.2
next reply other threads:[~2014-09-30 22:49 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-09-30 22:49 Tim Bird [this message]
2014-09-30 22:49 ` [PATCH v3] ARM: dts: Add initial DTS file for Sony Xperia Z1 phone Tim Bird
2014-09-30 22:49 ` Tim Bird
[not found] ` <CA+bK7J5x60WyyAp6+hGDf-fyAC=skQu9EdPUabPrzhMCDnOCrA@mail.gmail.com>
2014-10-09 18:22 ` Kumar Gala
2014-10-09 18:22 ` Kumar Gala
2014-10-09 20:47 ` Kevin Hilman
2014-10-09 20:47 ` Kevin Hilman
2014-10-09 20:47 ` Kevin Hilman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=542B338D.2040909@sonymobile.com \
--to=tim.bird@sonymobile.com \
--cc=Bjorn.Andersson@sonymobile.com \
--cc=devicetree@vger.kernel.org \
--cc=galak@codeaurora.org \
--cc=khilman@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.