Re: [RFC/PATCH 1/5] mtd: ubi: Read disturb infrastructure

[Tanya Brokhman <tlinder@codeaurora.org>]

On 10/2/2014 4:24 PM, Richard Weinberger wrote:
> Am 02.10.2014 14:50, schrieb Tanya Brokhman:
>>> Consider the case where you have a board with a fastmap enabled bootloader and a Linux OS.
>>> The bootloader does a fastmap attach and boots the kernel from UBI and the kernel it self has the rootfs
>>> on UBI too. If you install a new kernel with your changes applied it will write the fastmap in a different
>>> format and the bootloader will fail badly. In worst case the board bricks, in best case the bootloader can fall back
>>> to scanning mode but it will be slow and the customer unhappy.
>>>
>>
>> Ok, I understand the problem now. I wanted to discuss a possible solution before implementing it:
>> We have a "fastmap version" in fm_sb. At the moment UBI_FM_FMT_VERSION = 1 and any other is not supported. We can use that; Add another fm version (UBI_FM_FMT_VERSION_RD = 2) and
>> then decide according to it. Meaning, if during attach process we find fm superblock we check it's version, if it's != UBI_FM_FMT_VERSION_RD, we fall back to full scan. The next
>> fastmap will be written with the new layout (and new version number) so second boot will attach from fastmap without any issues.
>
> Yes, if we change the fastmap on-disk layout we need to change UBI_FM_FMT_VERSION.
> Then other fastmap implementations will notice the change and can hopefully recover.
> Implementations which do not evaluate UBI_FM_FMT_VERSION deserve breaking. ;-)

good. will work on the fix and upload a new set when ready&tested.

>
> That said, I'll not block a layout change but we have to be sure that it is *really* needed.

In order to support read-disturb, I think its really needed. There is no 
other way to save read counter per PEB but in fastmap.

> I'm currently heavily working on fastmap and my local queue with fastmap fixes keeps growing.
> If I find a horror bug which needs a fastmap layout change I want to change the layout only once,
> not twice.
>

How do you test all of your fastmap fixes? Some of them are not easy to 
reproduce (the pq saving for example). Besides heavy stability testing, 
I was testing my changes manually by a lot of dbg prints in the code and 
analyzing the logs manually. Not the optimal way....

> Thanks,
> //richard
>
> ______________________________________________________
> Linux MTD discussion mailing list
> http://lists.infradead.org/mailman/listinfo/linux-mtd/
>

Thanks,
Tanya Brokhman
-- 
Employee of Qualcomm Innovation Center, Inc.
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, 
hosted by The Linux Foundation