* [U-Boot] iMX6 Device Tree: status of CONFIG_OF_CONTROL
@ 2014-10-03 9:06 Luca Ellero
2014-10-03 13:41 ` Fabio Estevam
0 siblings, 1 reply; 3+ messages in thread
From: Luca Ellero @ 2014-10-03 9:06 UTC (permalink / raw)
To: u-boot
Hi,
I'm about to start the porting of U-Boot on a custom board based on iMX6
(close to SabreSD).
My questions are:
1) should I use device tree or use the "old" way (cloning directory and
make modifications)?
2) How is the status of CONFIG_OF_CONTROL on u-boot in general (and in
particular on iMX6)?
Thank you
Regards
Luca
----
Luca Ellero
http://www.brickedbrain.com
^ permalink raw reply [flat|nested] 3+ messages in thread
* [U-Boot] iMX6 Device Tree: status of CONFIG_OF_CONTROL
2014-10-03 9:06 [U-Boot] iMX6 Device Tree: status of CONFIG_OF_CONTROL Luca Ellero
@ 2014-10-03 13:41 ` Fabio Estevam
2014-10-03 14:36 ` Luca Ellero
0 siblings, 1 reply; 3+ messages in thread
From: Fabio Estevam @ 2014-10-03 13:41 UTC (permalink / raw)
To: u-boot
Hi Luca,
On Fri, Oct 3, 2014 at 6:06 AM, Luca Ellero <lroluk@gmail.com> wrote:
> Hi,
> I'm about to start the porting of U-Boot on a custom board based on iMX6
> (close to SabreSD).
> My questions are:
> 1) should I use device tree or use the "old" way (cloning directory and make
> modifications)?
For now, it's better to use the board file way. We are currently not
at the point to provide a dts to fully describe the hardware in U-boot
for imx.
^ permalink raw reply [flat|nested] 3+ messages in thread
* [U-Boot] iMX6 Device Tree: status of CONFIG_OF_CONTROL
2014-10-03 13:41 ` Fabio Estevam
@ 2014-10-03 14:36 ` Luca Ellero
0 siblings, 0 replies; 3+ messages in thread
From: Luca Ellero @ 2014-10-03 14:36 UTC (permalink / raw)
To: u-boot
Hi Fabio,
thanks your suggestion.
Regards
Luca
On 03/10/2014 15:41, Fabio Estevam wrote:
> Hi Luca,
>
> On Fri, Oct 3, 2014 at 6:06 AM, Luca Ellero <lroluk@gmail.com> wrote:
>> Hi,
>> I'm about to start the porting of U-Boot on a custom board based on iMX6
>> (close to SabreSD).
>> My questions are:
>> 1) should I use device tree or use the "old" way (cloning directory and make
>> modifications)?
> For now, it's better to use the board file way. We are currently not
> at the point to provide a dts to fully describe the hardware in U-boot
> for imx.
>
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2014-10-03 14:36 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2014-10-03 9:06 [U-Boot] iMX6 Device Tree: status of CONFIG_OF_CONTROL Luca Ellero
2014-10-03 13:41 ` Fabio Estevam
2014-10-03 14:36 ` Luca Ellero
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.