From: david.vrabel@citrix.com (David Vrabel)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 2/2] xen/arm: introduce GNTTABOP_cache_flush
Date: Fri, 3 Oct 2014 16:05:14 +0100 [thread overview]
Message-ID: <542EBB2A.6030104@citrix.com> (raw)
In-Reply-To: <1412348006-27884-2-git-send-email-stefano.stabellini@eu.citrix.com>
On 03/10/14 15:53, Stefano Stabellini wrote:
> Introduce support for new hypercall GNTTABOP_cache_flush.
> Use it to perform cache flashing on pages used for dma when necessary.
[..]
> /* functions called by SWIOTLB */
> @@ -22,16 +25,31 @@ static void dma_cache_maint(dma_addr_t handle, unsigned long offset,
> size_t len = left;
> void *vaddr;
>
> + if (len + offset > PAGE_SIZE)
> + len = PAGE_SIZE - offset;
> +
> if (!pfn_valid(pfn))
> {
> - /* TODO: cache flush */
> + struct gnttab_cache_flush cflush;
> +
> + cflush.op = 0;
> + cflush.a.dev_bus_addr = pfn << PAGE_SHIFT;
> + cflush.offset = offset;
> + cflush.size = len;
> +
> + if (op == dmac_unmap_area && dir != DMA_TO_DEVICE)
> + cflush.op = GNTTAB_CACHE_INVAL;
> + if (op == dmac_map_area) {
> + cflush.op = GNTTAB_CACHE_CLEAN;
> + if (dir == DMA_FROM_DEVICE)
> + cflush.op |= GNTTAB_CACHE_INVAL;
> + }
Are all these cache operations needed? You do a clean on map regardless
of the direction and INVAL on map seems unnecessary.
I would have thought it would be:
map && (TO_DEVICE || BOTH)
op = CLEAN
unmap && (FROM_DEVICE || BOTH)
op = INVAL
> --- a/include/xen/interface/grant_table.h
> +++ b/include/xen/interface/grant_table.h
> @@ -479,6 +479,24 @@ struct gnttab_get_version {
> DEFINE_GUEST_HANDLE_STRUCT(gnttab_get_version);
>
> /*
> + * Issue one or more cache maintenance operations on a portion of a
> + * page granted to the calling domain by a foreign domain.
> + */
> +#define GNTTABOP_cache_flush 12
> +struct gnttab_cache_flush {
> + union {
> + uint64_t dev_bus_addr;
> + grant_ref_t ref;
> + } a;
> + uint32_t offset; /* offset from start of grant */
> + uint32_t size; /* size within the grant */
> +#define GNTTAB_CACHE_CLEAN (1<<0)
> +#define GNTTAB_CACHE_INVAL (1<<1)
> + uint32_t op;
> +};
> +DEFINE_GUEST_HANDLE_STRUCT(gnttab_cache_flush);
> +
> +/*
> * Bitfield values for update_pin_status.flags.
> */
> /* Map the grant entry for access by I/O devices. */
If the ARM bits are correct, have a
Reviewed-by: David Vrabel <david.vrabel@citrix.com>
for the common header.
David
WARNING: multiple messages have this Message-ID (diff)
From: David Vrabel <david.vrabel@citrix.com>
To: Stefano Stabellini <stefano.stabellini@eu.citrix.com>,
<xen-devel@lists.xensource.com>
Cc: <konrad.wilk@oracle.com>, <Ian.Campbell@citrix.com>,
<linux-kernel@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>
Subject: Re: [PATCH v2 2/2] xen/arm: introduce GNTTABOP_cache_flush
Date: Fri, 3 Oct 2014 16:05:14 +0100 [thread overview]
Message-ID: <542EBB2A.6030104@citrix.com> (raw)
In-Reply-To: <1412348006-27884-2-git-send-email-stefano.stabellini@eu.citrix.com>
On 03/10/14 15:53, Stefano Stabellini wrote:
> Introduce support for new hypercall GNTTABOP_cache_flush.
> Use it to perform cache flashing on pages used for dma when necessary.
[..]
> /* functions called by SWIOTLB */
> @@ -22,16 +25,31 @@ static void dma_cache_maint(dma_addr_t handle, unsigned long offset,
> size_t len = left;
> void *vaddr;
>
> + if (len + offset > PAGE_SIZE)
> + len = PAGE_SIZE - offset;
> +
> if (!pfn_valid(pfn))
> {
> - /* TODO: cache flush */
> + struct gnttab_cache_flush cflush;
> +
> + cflush.op = 0;
> + cflush.a.dev_bus_addr = pfn << PAGE_SHIFT;
> + cflush.offset = offset;
> + cflush.size = len;
> +
> + if (op == dmac_unmap_area && dir != DMA_TO_DEVICE)
> + cflush.op = GNTTAB_CACHE_INVAL;
> + if (op == dmac_map_area) {
> + cflush.op = GNTTAB_CACHE_CLEAN;
> + if (dir == DMA_FROM_DEVICE)
> + cflush.op |= GNTTAB_CACHE_INVAL;
> + }
Are all these cache operations needed? You do a clean on map regardless
of the direction and INVAL on map seems unnecessary.
I would have thought it would be:
map && (TO_DEVICE || BOTH)
op = CLEAN
unmap && (FROM_DEVICE || BOTH)
op = INVAL
> --- a/include/xen/interface/grant_table.h
> +++ b/include/xen/interface/grant_table.h
> @@ -479,6 +479,24 @@ struct gnttab_get_version {
> DEFINE_GUEST_HANDLE_STRUCT(gnttab_get_version);
>
> /*
> + * Issue one or more cache maintenance operations on a portion of a
> + * page granted to the calling domain by a foreign domain.
> + */
> +#define GNTTABOP_cache_flush 12
> +struct gnttab_cache_flush {
> + union {
> + uint64_t dev_bus_addr;
> + grant_ref_t ref;
> + } a;
> + uint32_t offset; /* offset from start of grant */
> + uint32_t size; /* size within the grant */
> +#define GNTTAB_CACHE_CLEAN (1<<0)
> +#define GNTTAB_CACHE_INVAL (1<<1)
> + uint32_t op;
> +};
> +DEFINE_GUEST_HANDLE_STRUCT(gnttab_cache_flush);
> +
> +/*
> * Bitfield values for update_pin_status.flags.
> */
> /* Map the grant entry for access by I/O devices. */
If the ARM bits are correct, have a
Reviewed-by: David Vrabel <david.vrabel@citrix.com>
for the common header.
David
WARNING: multiple messages have this Message-ID (diff)
From: David Vrabel <david.vrabel@citrix.com>
To: Stefano Stabellini <stefano.stabellini@eu.citrix.com>,
xen-devel@lists.xensource.com
Cc: konrad.wilk@oracle.com, Ian.Campbell@citrix.com,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH v2 2/2] xen/arm: introduce GNTTABOP_cache_flush
Date: Fri, 3 Oct 2014 16:05:14 +0100 [thread overview]
Message-ID: <542EBB2A.6030104@citrix.com> (raw)
In-Reply-To: <1412348006-27884-2-git-send-email-stefano.stabellini@eu.citrix.com>
On 03/10/14 15:53, Stefano Stabellini wrote:
> Introduce support for new hypercall GNTTABOP_cache_flush.
> Use it to perform cache flashing on pages used for dma when necessary.
[..]
> /* functions called by SWIOTLB */
> @@ -22,16 +25,31 @@ static void dma_cache_maint(dma_addr_t handle, unsigned long offset,
> size_t len = left;
> void *vaddr;
>
> + if (len + offset > PAGE_SIZE)
> + len = PAGE_SIZE - offset;
> +
> if (!pfn_valid(pfn))
> {
> - /* TODO: cache flush */
> + struct gnttab_cache_flush cflush;
> +
> + cflush.op = 0;
> + cflush.a.dev_bus_addr = pfn << PAGE_SHIFT;
> + cflush.offset = offset;
> + cflush.size = len;
> +
> + if (op == dmac_unmap_area && dir != DMA_TO_DEVICE)
> + cflush.op = GNTTAB_CACHE_INVAL;
> + if (op == dmac_map_area) {
> + cflush.op = GNTTAB_CACHE_CLEAN;
> + if (dir == DMA_FROM_DEVICE)
> + cflush.op |= GNTTAB_CACHE_INVAL;
> + }
Are all these cache operations needed? You do a clean on map regardless
of the direction and INVAL on map seems unnecessary.
I would have thought it would be:
map && (TO_DEVICE || BOTH)
op = CLEAN
unmap && (FROM_DEVICE || BOTH)
op = INVAL
> --- a/include/xen/interface/grant_table.h
> +++ b/include/xen/interface/grant_table.h
> @@ -479,6 +479,24 @@ struct gnttab_get_version {
> DEFINE_GUEST_HANDLE_STRUCT(gnttab_get_version);
>
> /*
> + * Issue one or more cache maintenance operations on a portion of a
> + * page granted to the calling domain by a foreign domain.
> + */
> +#define GNTTABOP_cache_flush 12
> +struct gnttab_cache_flush {
> + union {
> + uint64_t dev_bus_addr;
> + grant_ref_t ref;
> + } a;
> + uint32_t offset; /* offset from start of grant */
> + uint32_t size; /* size within the grant */
> +#define GNTTAB_CACHE_CLEAN (1<<0)
> +#define GNTTAB_CACHE_INVAL (1<<1)
> + uint32_t op;
> +};
> +DEFINE_GUEST_HANDLE_STRUCT(gnttab_cache_flush);
> +
> +/*
> * Bitfield values for update_pin_status.flags.
> */
> /* Map the grant entry for access by I/O devices. */
If the ARM bits are correct, have a
Reviewed-by: David Vrabel <david.vrabel@citrix.com>
for the common header.
David
next prev parent reply other threads:[~2014-10-03 15:05 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-10-03 14:52 [PATCH v2 0/2] introduce XENMEM_cache_flush Stefano Stabellini
2014-10-03 14:52 ` Stefano Stabellini
2014-10-03 14:52 ` Stefano Stabellini
2014-10-03 14:53 ` [PATCH v2 1/2] xen/arm: remove handling of XENFEAT_grant_map_identity Stefano Stabellini
2014-10-03 14:53 ` Stefano Stabellini
2014-10-03 14:53 ` Stefano Stabellini
2014-10-03 14:53 ` [PATCH v2 2/2] xen/arm: introduce GNTTABOP_cache_flush Stefano Stabellini
2014-10-03 14:53 ` Stefano Stabellini
2014-10-03 14:53 ` Stefano Stabellini
2014-10-03 15:05 ` David Vrabel [this message]
2014-10-03 15:05 ` David Vrabel
2014-10-03 15:05 ` David Vrabel
2014-10-03 16:20 ` Stefano Stabellini
2014-10-03 16:20 ` Stefano Stabellini
2014-10-03 16:20 ` Stefano Stabellini
2014-10-03 16:34 ` Ian Campbell
2014-10-03 16:34 ` Ian Campbell
2014-10-03 16:34 ` Ian Campbell
2014-10-03 16:36 ` David Vrabel
2014-10-03 16:36 ` David Vrabel
2014-10-03 16:36 ` David Vrabel
2014-10-03 16:57 ` Russell King - ARM Linux
2014-10-03 16:57 ` Russell King - ARM Linux
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=542EBB2A.6030104@citrix.com \
--to=david.vrabel@citrix.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.