[U-Boot] [PATCH 5/6] sunxi: Use PG3 - PG8 as io-pins for mmc1

[Hans de Goede <hdegoede@redhat.com>]

Hi,

On 10/04/2014 10:37 AM, Ian Campbell wrote:
> On Fri, 2014-10-03 at 17:05 +0200, Hans de Goede wrote:
>> None of the known sunxi devices actually use mmc1 routed through PH, where
>> as some devices do actually use mmc1 routed through PG, so change the routing
>> of mmc1 to PG. If in the future we encounter devices with mmc1 routed through
>> PH, we will need to change things to be a bit more flexible.
>>
>> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
> 
> Acked-by: Ian Campbell <ian.campbell@citrix.com>
> 
> Although it seems that adding a Kconfig choice option would only be a
> dozen or so lines of pretty trivial stuff if we wanted to do it now.

This mostly seems to be a sun4i/sun7i vs sun5i thing. mmc1 could be routed
through PH on sun4i/sun7i, but actually is never used there, as PH typically
is used for gpio purposed on sun4i/sun7i, where as on sun5i (which has way
less pins), mmc1 goes out on PG, and actually is used as such there.

I have considered keeping the old pinmux settings using #if defined SUN5I
for the new ones, but since the old ones are never used just replacing
them seems better.

Regards,

Hans