* [PATCH v4] ARM: dts: qcom: add CM-QS600 board
@ 2014-10-01 16:09 ` Mike Rapoport
0 siblings, 0 replies; 4+ messages in thread
From: Mike Rapoport @ 2014-10-01 16:09 UTC (permalink / raw)
To: Kumar Gala
Cc: Srinivas Kandagatla, Bjorn Andersson, Igor Grinberg,
linux-arm-msm, linux-arm-kernel, Mike Rapoport
CM-QS600 is a APQ8064 based computer on module.
The details are available at
http://compulab.co.il/products/computer-on-modules/cm-qs600/
Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com>
Acked-by: Igor Grinberg <grinberg@compulab.co.il>
---
v2 changes: duplicate the settings for the cm-qs600 board in its .dts file as Kumar suggested
v3 changes: add board details and keep dts Makefile sorted alphabetically
v4 changes: fix eeprom defintion and update subject as per Igor's comments
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts | 59 +++++++++++++++++++++++++++++
2 files changed, 60 insertions(+)
create mode 100644 arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index aaa1a68..3243722 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -339,6 +339,7 @@ dtb-$(CONFIG_ARCH_ORION5X) += orion5x-lacie-d2-network.dtb \
orion5x-rd88f5182-nas.dtb
dtb-$(CONFIG_ARCH_PRIMA2) += prima2-evb.dtb
dtb-$(CONFIG_ARCH_QCOM) += \
+ qcom-apq8064-cm-qs600.dtb \
qcom-apq8064-ifc6410.dtb \
qcom-apq8074-dragonboard.dtb \
qcom-apq8084-ifc6540.dtb \
diff --git a/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts b/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts
new file mode 100644
index 0000000..5d75666
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts
@@ -0,0 +1,59 @@
+#include "qcom-apq8064-v2.0.dtsi"
+
+/ {
+ model = "CompuLab CM-QS600";
+ compatible = "qcom,apq8064-cm-qs600", "qcom,apq8064";
+
+ soc {
+ pinctrl@800000 {
+ i2c1_pins: i2c1 {
+ mux {
+ pins = "gpio20", "gpio21";
+ function = "gsbi1";
+ };
+ };
+ };
+
+ gsbi@12440000 {
+ status = "okay";
+ qcom,mode = <GSBI_PROT_I2C>;
+
+ i2c@12460000 {
+ status = "okay";
+ clock-frequency = <200000>;
+ pinctrl-0 = <&i2c1_pins>;
+ pinctrl-names = "default";
+
+ eeprom: eeprom@50 {
+ compatible = "24c02";
+ reg = <0x50>;
+ pagesize = <32>;
+ };
+ };
+ };
+
+ gsbi@16600000 {
+ status = "ok";
+ qcom,mode = <GSBI_PROT_I2C_UART>;
+ serial@16640000 {
+ status = "ok";
+ };
+ };
+
+ amba {
+ /* eMMC */
+ sdcc1: sdcc@12400000 {
+ status = "okay";
+ };
+
+ /* External micro SD card */
+ sdcc3: sdcc@12180000 {
+ status = "okay";
+ };
+ /* WLAN */
+ sdcc4: sdcc@121c0000 {
+ status = "okay";
+ };
+ };
+ };
+};
--
1.9.1
^ permalink raw reply related [flat|nested] 4+ messages in thread* [PATCH v4] ARM: dts: qcom: add CM-QS600 board
@ 2014-10-01 16:09 ` Mike Rapoport
0 siblings, 0 replies; 4+ messages in thread
From: Mike Rapoport @ 2014-10-01 16:09 UTC (permalink / raw)
To: linux-arm-kernel
CM-QS600 is a APQ8064 based computer on module.
The details are available at
http://compulab.co.il/products/computer-on-modules/cm-qs600/
Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com>
Acked-by: Igor Grinberg <grinberg@compulab.co.il>
---
v2 changes: duplicate the settings for the cm-qs600 board in its .dts file as Kumar suggested
v3 changes: add board details and keep dts Makefile sorted alphabetically
v4 changes: fix eeprom defintion and update subject as per Igor's comments
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts | 59 +++++++++++++++++++++++++++++
2 files changed, 60 insertions(+)
create mode 100644 arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index aaa1a68..3243722 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -339,6 +339,7 @@ dtb-$(CONFIG_ARCH_ORION5X) += orion5x-lacie-d2-network.dtb \
orion5x-rd88f5182-nas.dtb
dtb-$(CONFIG_ARCH_PRIMA2) += prima2-evb.dtb
dtb-$(CONFIG_ARCH_QCOM) += \
+ qcom-apq8064-cm-qs600.dtb \
qcom-apq8064-ifc6410.dtb \
qcom-apq8074-dragonboard.dtb \
qcom-apq8084-ifc6540.dtb \
diff --git a/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts b/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts
new file mode 100644
index 0000000..5d75666
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts
@@ -0,0 +1,59 @@
+#include "qcom-apq8064-v2.0.dtsi"
+
+/ {
+ model = "CompuLab CM-QS600";
+ compatible = "qcom,apq8064-cm-qs600", "qcom,apq8064";
+
+ soc {
+ pinctrl at 800000 {
+ i2c1_pins: i2c1 {
+ mux {
+ pins = "gpio20", "gpio21";
+ function = "gsbi1";
+ };
+ };
+ };
+
+ gsbi at 12440000 {
+ status = "okay";
+ qcom,mode = <GSBI_PROT_I2C>;
+
+ i2c at 12460000 {
+ status = "okay";
+ clock-frequency = <200000>;
+ pinctrl-0 = <&i2c1_pins>;
+ pinctrl-names = "default";
+
+ eeprom: eeprom at 50 {
+ compatible = "24c02";
+ reg = <0x50>;
+ pagesize = <32>;
+ };
+ };
+ };
+
+ gsbi at 16600000 {
+ status = "ok";
+ qcom,mode = <GSBI_PROT_I2C_UART>;
+ serial at 16640000 {
+ status = "ok";
+ };
+ };
+
+ amba {
+ /* eMMC */
+ sdcc1: sdcc at 12400000 {
+ status = "okay";
+ };
+
+ /* External micro SD card */
+ sdcc3: sdcc at 12180000 {
+ status = "okay";
+ };
+ /* WLAN */
+ sdcc4: sdcc at 121c0000 {
+ status = "okay";
+ };
+ };
+ };
+};
--
1.9.1
^ permalink raw reply related [flat|nested] 4+ messages in thread* Re: [PATCH v4] ARM: dts: qcom: add CM-QS600 board
2014-10-01 16:09 ` Mike Rapoport
@ 2014-10-10 7:36 ` Igor Grinberg
-1 siblings, 0 replies; 4+ messages in thread
From: Igor Grinberg @ 2014-10-10 7:36 UTC (permalink / raw)
To: Kumar Gala
Cc: Mike Rapoport, Srinivas Kandagatla, Bjorn Andersson,
linux-arm-msm, linux-arm-kernel, Nicolas Dechesne, devicetree
Hi Kumar,
As I've understand from Kevin's letter, we can submit the DT only
platforms addition also for 3.18.
Can we please have this one applied?
Thanks!
On 10/01/14 19:09, Mike Rapoport wrote:
> CM-QS600 is a APQ8064 based computer on module.
> The details are available at
> http://compulab.co.il/products/computer-on-modules/cm-qs600/
>
> Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com>
> Acked-by: Igor Grinberg <grinberg@compulab.co.il>
> ---
> v2 changes: duplicate the settings for the cm-qs600 board in its .dts file as Kumar suggested
> v3 changes: add board details and keep dts Makefile sorted alphabetically
> v4 changes: fix eeprom defintion and update subject as per Igor's comments
>
> arch/arm/boot/dts/Makefile | 1 +
> arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts | 59 +++++++++++++++++++++++++++++
> 2 files changed, 60 insertions(+)
> create mode 100644 arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts
>
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index aaa1a68..3243722 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -339,6 +339,7 @@ dtb-$(CONFIG_ARCH_ORION5X) += orion5x-lacie-d2-network.dtb \
> orion5x-rd88f5182-nas.dtb
> dtb-$(CONFIG_ARCH_PRIMA2) += prima2-evb.dtb
> dtb-$(CONFIG_ARCH_QCOM) += \
> + qcom-apq8064-cm-qs600.dtb \
> qcom-apq8064-ifc6410.dtb \
> qcom-apq8074-dragonboard.dtb \
> qcom-apq8084-ifc6540.dtb \
> diff --git a/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts b/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts
> new file mode 100644
> index 0000000..5d75666
> --- /dev/null
> +++ b/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts
> @@ -0,0 +1,59 @@
> +#include "qcom-apq8064-v2.0.dtsi"
> +
> +/ {
> + model = "CompuLab CM-QS600";
> + compatible = "qcom,apq8064-cm-qs600", "qcom,apq8064";
> +
> + soc {
> + pinctrl@800000 {
> + i2c1_pins: i2c1 {
> + mux {
> + pins = "gpio20", "gpio21";
> + function = "gsbi1";
> + };
> + };
> + };
> +
> + gsbi@12440000 {
> + status = "okay";
> + qcom,mode = <GSBI_PROT_I2C>;
> +
> + i2c@12460000 {
> + status = "okay";
> + clock-frequency = <200000>;
> + pinctrl-0 = <&i2c1_pins>;
> + pinctrl-names = "default";
> +
> + eeprom: eeprom@50 {
> + compatible = "24c02";
> + reg = <0x50>;
> + pagesize = <32>;
> + };
> + };
> + };
> +
> + gsbi@16600000 {
> + status = "ok";
> + qcom,mode = <GSBI_PROT_I2C_UART>;
> + serial@16640000 {
> + status = "ok";
> + };
> + };
> +
> + amba {
> + /* eMMC */
> + sdcc1: sdcc@12400000 {
> + status = "okay";
> + };
> +
> + /* External micro SD card */
> + sdcc3: sdcc@12180000 {
> + status = "okay";
> + };
> + /* WLAN */
> + sdcc4: sdcc@121c0000 {
> + status = "okay";
> + };
> + };
> + };
> +};
>
--
Regards,
Igor.
^ permalink raw reply [flat|nested] 4+ messages in thread* [PATCH v4] ARM: dts: qcom: add CM-QS600 board
@ 2014-10-10 7:36 ` Igor Grinberg
0 siblings, 0 replies; 4+ messages in thread
From: Igor Grinberg @ 2014-10-10 7:36 UTC (permalink / raw)
To: linux-arm-kernel
Hi Kumar,
As I've understand from Kevin's letter, we can submit the DT only
platforms addition also for 3.18.
Can we please have this one applied?
Thanks!
On 10/01/14 19:09, Mike Rapoport wrote:
> CM-QS600 is a APQ8064 based computer on module.
> The details are available at
> http://compulab.co.il/products/computer-on-modules/cm-qs600/
>
> Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com>
> Acked-by: Igor Grinberg <grinberg@compulab.co.il>
> ---
> v2 changes: duplicate the settings for the cm-qs600 board in its .dts file as Kumar suggested
> v3 changes: add board details and keep dts Makefile sorted alphabetically
> v4 changes: fix eeprom defintion and update subject as per Igor's comments
>
> arch/arm/boot/dts/Makefile | 1 +
> arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts | 59 +++++++++++++++++++++++++++++
> 2 files changed, 60 insertions(+)
> create mode 100644 arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts
>
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index aaa1a68..3243722 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -339,6 +339,7 @@ dtb-$(CONFIG_ARCH_ORION5X) += orion5x-lacie-d2-network.dtb \
> orion5x-rd88f5182-nas.dtb
> dtb-$(CONFIG_ARCH_PRIMA2) += prima2-evb.dtb
> dtb-$(CONFIG_ARCH_QCOM) += \
> + qcom-apq8064-cm-qs600.dtb \
> qcom-apq8064-ifc6410.dtb \
> qcom-apq8074-dragonboard.dtb \
> qcom-apq8084-ifc6540.dtb \
> diff --git a/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts b/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts
> new file mode 100644
> index 0000000..5d75666
> --- /dev/null
> +++ b/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts
> @@ -0,0 +1,59 @@
> +#include "qcom-apq8064-v2.0.dtsi"
> +
> +/ {
> + model = "CompuLab CM-QS600";
> + compatible = "qcom,apq8064-cm-qs600", "qcom,apq8064";
> +
> + soc {
> + pinctrl at 800000 {
> + i2c1_pins: i2c1 {
> + mux {
> + pins = "gpio20", "gpio21";
> + function = "gsbi1";
> + };
> + };
> + };
> +
> + gsbi at 12440000 {
> + status = "okay";
> + qcom,mode = <GSBI_PROT_I2C>;
> +
> + i2c at 12460000 {
> + status = "okay";
> + clock-frequency = <200000>;
> + pinctrl-0 = <&i2c1_pins>;
> + pinctrl-names = "default";
> +
> + eeprom: eeprom at 50 {
> + compatible = "24c02";
> + reg = <0x50>;
> + pagesize = <32>;
> + };
> + };
> + };
> +
> + gsbi at 16600000 {
> + status = "ok";
> + qcom,mode = <GSBI_PROT_I2C_UART>;
> + serial at 16640000 {
> + status = "ok";
> + };
> + };
> +
> + amba {
> + /* eMMC */
> + sdcc1: sdcc at 12400000 {
> + status = "okay";
> + };
> +
> + /* External micro SD card */
> + sdcc3: sdcc at 12180000 {
> + status = "okay";
> + };
> + /* WLAN */
> + sdcc4: sdcc at 121c0000 {
> + status = "okay";
> + };
> + };
> + };
> +};
>
--
Regards,
Igor.
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2014-10-10 7:36 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2014-10-01 16:09 [PATCH v4] ARM: dts: qcom: add CM-QS600 board Mike Rapoport
2014-10-01 16:09 ` Mike Rapoport
2014-10-10 7:36 ` Igor Grinberg
2014-10-10 7:36 ` Igor Grinberg
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.