* Direct FB 1.7 examples failing on imx6 with 3.10 kernel image
@ 2014-10-17 11:33 Subodh Chiwate
2014-10-17 14:07 ` Daiane Angolini
0 siblings, 1 reply; 10+ messages in thread
From: Subodh Chiwate @ 2014-10-17 11:33 UTC (permalink / raw)
To: meta-freescale@yoctoproject.org
Hi,
I am setting up imx6 board with yocto built directfb gui image.
I get following errors whn I try to execute the dfb samples.
Please help in resolving the issue.
root@imx6qsabresd:/usr/lib# df_knuckles
(*) Direct/Thread: Started 'SigHandler' (927) [CRITICAL - OTHER/0]
<8388608>...
~~~~~~~~~~~~~~~~~~~~~~~~~~| DirectFB 1.7.1 |~~~~~~~~~~~~~~~~~~~~~~~~~~
(c) 2012-2013 DirectFB integrated media GmbH
(c) 2001-2013 The world wide DirectFB Open Source Community
(c) 2000-2004 Convergence (integrated media) GmbH
----------------------------------------------------------------
(*) DirectFB/Core: Single Application Core. (2014-10-11 22:05)
(*) Direct/Memcpy: Using libc memcpy()
(*) Direct/Thread: Started 'Fusion Dispatch' (928) [MESSAGING - OTHER/0]
<8388608>...
(*) Direct/Thread: Started 'VT Switcher' (929) [CRITICAL - OTHER/0]
<8388608>...
(*) Direct/Thread: Started 'VT Flusher' (930) [DEFAULT - OTHER/0]
<8388608>...
(*) DirectFB/FBDev: Found 'DISP3 BG' (ID 0) with frame buffer at
0x3c100000, 4050k (MMIO 0x00000000, 0k)
(*) DirectFB/Input: Hot-plug detection enabled with Input Hub Driver
(*) Direct/Thread: Started 'Linux Input' (931) [INPUT - OTHER/0]
<8388608>...
(*) DirectFB/Input: max11801_ts (1) 0.1 (directfb.org)
(*) Direct/Thread: Started 'Linux Input' (932) [INPUT - OTHER/0]
<8388608>...
(*) DirectFB/Input: mag3110 (2) 0.1 (directfb.org)
(*) Direct/Thread: Started 'Linux Input' (933) [INPUT - OTHER/0]
<8388608>...
(*) DirectFB/Input: mma845x (3) 0.1 (directfb.org)
(*) Direct/Thread: Started 'Linux Input' (934) [INPUT - OTHER/0]
<8388608>...
(*) DirectFB/Input: gpio-keys.27 (4) 0.1 (directfb.org)
(*) Direct/Thread: Started 'Hotplug with Linux Input' (935) [INPUT -
OTHER/0] <8388608>...
(*) DirectFB/Input: Hot-plug detection enabled with Linux Input Driver
(*) Direct/Thread: Started 'PS/2 Input' (936) [INPUT - OTHER/0]
<8388608>...
(*) DirectFB/Input: IMPS/2 Mouse 1.0 (directfb.org)
(*) Direct/Thread: Started 'Keyboard Input' (937) [INPUT - OTHER/0]
<8388608>...
(*) DirectFB/Input: Keyboard 0.9 (directfb.org)
Segmentation fault
--
Regards,
Subodh
-- **************** CAUTION - Disclaimer ***************** This e-mail contains PRIVILEGED AND CONFIDENTIAL INFORMATION intended solely for the use of the addressee(s). If you are not the intended recipient, please notify the sender by e-mail and delete the original message. Further, you are not to copy, disclose, or distribute this e-mail or its contents to any other person and any such actions are unlawful. This e-mail may contain viruses. UFOMoviez India Ltd. has taken every reasonable precaution to minimize this risk, but is not liable for any damage you may sustain as a result of any virus in this e-mail. You should carry out your own virus checks before opening the e-mail or attachment. UFOMoviez India Ltd. reserves the right to monitor and review the content of all messages sent to or from this e-mail address. Messages sent to or from this e-mail address may be stored on the UFOMoviez India Ltd.'s e-mail system. ***************** End of Disclaimer *******************
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: Direct FB 1.7 examples failing on imx6 with 3.10 kernel image
2014-10-17 11:33 Direct FB 1.7 examples failing on imx6 with 3.10 kernel image Subodh Chiwate
@ 2014-10-17 14:07 ` Daiane Angolini
2014-10-20 5:06 ` Subodh Chiwate
0 siblings, 1 reply; 10+ messages in thread
From: Daiane Angolini @ 2014-10-17 14:07 UTC (permalink / raw)
To: Subodh Chiwate; +Cc: meta-freescale@yoctoproject.org
On Fri, Oct 17, 2014 at 8:33 AM, Subodh Chiwate
<subodh.chiwate@ufomoviez.com> wrote:
> Hi,
> I am setting up imx6 board with yocto built directfb gui image.
> I get following errors whn I try to execute the dfb samples.
> Please help in resolving the issue.
>
export DISPLAY:=0
?
last time I tested directfb it worked fine.
Daiane
> root@imx6qsabresd:/usr/lib# df_knuckles
> (*) Direct/Thread: Started 'SigHandler' (927) [CRITICAL - OTHER/0]
> <8388608>...
>
> ~~~~~~~~~~~~~~~~~~~~~~~~~~| DirectFB 1.7.1 |~~~~~~~~~~~~~~~~~~~~~~~~~~
> (c) 2012-2013 DirectFB integrated media GmbH
> (c) 2001-2013 The world wide DirectFB Open Source Community
> (c) 2000-2004 Convergence (integrated media) GmbH
> ----------------------------------------------------------------
>
> (*) DirectFB/Core: Single Application Core. (2014-10-11 22:05)
> (*) Direct/Memcpy: Using libc memcpy()
> (*) Direct/Thread: Started 'Fusion Dispatch' (928) [MESSAGING - OTHER/0]
> <8388608>...
> (*) Direct/Thread: Started 'VT Switcher' (929) [CRITICAL - OTHER/0]
> <8388608>...
> (*) Direct/Thread: Started 'VT Flusher' (930) [DEFAULT - OTHER/0]
> <8388608>...
> (*) DirectFB/FBDev: Found 'DISP3 BG' (ID 0) with frame buffer at
> 0x3c100000, 4050k (MMIO 0x00000000, 0k)
> (*) DirectFB/Input: Hot-plug detection enabled with Input Hub Driver
> (*) Direct/Thread: Started 'Linux Input' (931) [INPUT - OTHER/0]
> <8388608>...
> (*) DirectFB/Input: max11801_ts (1) 0.1 (directfb.org)
> (*) Direct/Thread: Started 'Linux Input' (932) [INPUT - OTHER/0]
> <8388608>...
> (*) DirectFB/Input: mag3110 (2) 0.1 (directfb.org)
> (*) Direct/Thread: Started 'Linux Input' (933) [INPUT - OTHER/0]
> <8388608>...
> (*) DirectFB/Input: mma845x (3) 0.1 (directfb.org)
> (*) Direct/Thread: Started 'Linux Input' (934) [INPUT - OTHER/0]
> <8388608>...
> (*) DirectFB/Input: gpio-keys.27 (4) 0.1 (directfb.org)
> (*) Direct/Thread: Started 'Hotplug with Linux Input' (935) [INPUT -
> OTHER/0] <8388608>...
> (*) DirectFB/Input: Hot-plug detection enabled with Linux Input Driver
> (*) Direct/Thread: Started 'PS/2 Input' (936) [INPUT - OTHER/0]
> <8388608>...
> (*) DirectFB/Input: IMPS/2 Mouse 1.0 (directfb.org)
> (*) Direct/Thread: Started 'Keyboard Input' (937) [INPUT - OTHER/0]
> <8388608>...
> (*) DirectFB/Input: Keyboard 0.9 (directfb.org)
> Segmentation fault
>
> --
> Regards,
> Subodh
>
> -- **************** CAUTION - Disclaimer ***************** This e-mail
> contains PRIVILEGED AND CONFIDENTIAL INFORMATION intended solely for the use
> of the addressee(s). If you are not the intended recipient, please notify
> the sender by e-mail and delete the original message. Further, you are not
> to copy, disclose, or distribute this e-mail or its contents to any other
> person and any such actions are unlawful. This e-mail may contain viruses.
> UFOMoviez India Ltd. has taken every reasonable precaution to minimize this
> risk, but is not liable for any damage you may sustain as a result of any
> virus in this e-mail. You should carry out your own virus checks before
> opening the e-mail or attachment. UFOMoviez India Ltd. reserves the right to
> monitor and review the content of all messages sent to or from this e-mail
> address. Messages sent to or from this e-mail address may be stored on the
> UFOMoviez India Ltd.'s e-mail system. ***************** End of Disclaimer
> *******************
> --
> _______________________________________________
> meta-freescale mailing list
> meta-freescale@yoctoproject.org
> https://lists.yoctoproject.org/listinfo/meta-freescale
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: Direct FB 1.7 examples failing on imx6 with 3.10 kernel image
2014-10-17 14:07 ` Daiane Angolini
@ 2014-10-20 5:06 ` Subodh Chiwate
2014-10-20 5:29 ` Subodh Chiwate
0 siblings, 1 reply; 10+ messages in thread
From: Subodh Chiwate @ 2014-10-20 5:06 UTC (permalink / raw)
To: Daiane Angolini; +Cc: meta-freescale@yoctoproject.org
I checked and got following output. I have built the image to use DFB as
the only display mechanism.
Seems some configuration regarding the display is missing.
root@imx6qsabresd:~# echo $DISPLAY
root@imx6qsabresd:~# uname -a
Linux imx6qsabresd 3.10.17-1.0.0_ga+g232293e #1 SMP PREEMPT Sat Apr 5
05:29:23 CST 2014 armv7l GNU/Linux
On 10/17/2014 07:37 PM, Daiane Angolini wrote:
> export DISPLAY:=0
--
Regards,
Subodh
-- **************** CAUTION - Disclaimer ***************** This e-mail contains PRIVILEGED AND CONFIDENTIAL INFORMATION intended solely for the use of the addressee(s). If you are not the intended recipient, please notify the sender by e-mail and delete the original message. Further, you are not to copy, disclose, or distribute this e-mail or its contents to any other person and any such actions are unlawful. This e-mail may contain viruses. UFOMoviez India Ltd. has taken every reasonable precaution to minimize this risk, but is not liable for any damage you may sustain as a result of any virus in this e-mail. You should carry out your own virus checks before opening the e-mail or attachment. UFOMoviez India Ltd. reserves the right to monitor and review the content of all messages sent to or from this e-mail address. Messages sent to or from this e-mail address may be stored on the UFOMoviez India Ltd.'s e-mail system. ***************** End of Disclaimer *******************
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: Direct FB 1.7 examples failing on imx6 with 3.10 kernel image
2014-10-20 5:06 ` Subodh Chiwate
@ 2014-10-20 5:29 ` Subodh Chiwate
2014-10-20 13:19 ` Otavio Salvador
0 siblings, 1 reply; 10+ messages in thread
From: Subodh Chiwate @ 2014-10-20 5:29 UTC (permalink / raw)
To: Daiane Angolini; +Cc: meta-freescale@yoctoproject.org
Just found some more information from strace if df_dok.
open("/dev/galcore", O_RDWR) = 24
ioctl(24, 0x7530, 0x7efa2768) = -1 ENOTTY (Inappropriate ioctl
for device)
ioctl(24, 0x7530, 0x7efa2738) = -1 ENOTTY (Inappropriate ioctl
for device)
ioctl(24, 0x7530, 0x7efa2738) = -1 ENOTTY (Inappropriate ioctl
for device)
ioctl(24, 0x7530, 0x7efa2740) = -1 ENOTTY (Inappropriate ioctl
for device)
ioctl(24, 0x7530, 0x7efa26e8) = -1 ENOTTY (Inappropriate ioctl
for device)
ioctl(24, 0x7530, 0x7efa2698) = -1 ENOTTY (Inappropriate ioctl
for device)
--- SIGSEGV {si_signo=SIGSEGV, si_code=SEGV_MAPERR, si_addr=0xd8} ---
+++ killed by SIGSEGV +++
On 10/20/2014 10:36 AM, Subodh Chiwate wrote:
> I checked and got following output. I have built the image to use DFB
> as the only display mechanism.
> Seems some configuration regarding the display is missing.
>
> root@imx6qsabresd:~# echo $DISPLAY
>
> root@imx6qsabresd:~# uname -a
> Linux imx6qsabresd 3.10.17-1.0.0_ga+g232293e #1 SMP PREEMPT Sat Apr 5
> 05:29:23 CST 2014 armv7l GNU/Linux
>
> On 10/17/2014 07:37 PM, Daiane Angolini wrote:
>> export DISPLAY:=0
>
--
Regards,
Subodh
-- **************** CAUTION - Disclaimer ***************** This e-mail contains PRIVILEGED AND CONFIDENTIAL INFORMATION intended solely for the use of the addressee(s). If you are not the intended recipient, please notify the sender by e-mail and delete the original message. Further, you are not to copy, disclose, or distribute this e-mail or its contents to any other person and any such actions are unlawful. This e-mail may contain viruses. UFOMoviez India Ltd. has taken every reasonable precaution to minimize this risk, but is not liable for any damage you may sustain as a result of any virus in this e-mail. You should carry out your own virus checks before opening the e-mail or attachment. UFOMoviez India Ltd. reserves the right to monitor and review the content of all messages sent to or from this e-mail address. Messages sent to or from this e-mail address may be stored on the UFOMoviez India Ltd.'s e-mail system. ***************** End of Disclaimer *******************
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: Direct FB 1.7 examples failing on imx6 with 3.10 kernel image
2014-10-20 5:29 ` Subodh Chiwate
@ 2014-10-20 13:19 ` Otavio Salvador
2014-10-20 13:24 ` Subodh Chiwate
0 siblings, 1 reply; 10+ messages in thread
From: Otavio Salvador @ 2014-10-20 13:19 UTC (permalink / raw)
To: Subodh Chiwate; +Cc: meta-freescale@yoctoproject.org
On Mon, Oct 20, 2014 at 3:29 AM, Subodh Chiwate
<subodh.chiwate@ufomoviez.com> wrote:
> Just found some more information from strace if df_dok.
Which board is it?
--
Otavio Salvador O.S. Systems
http://www.ossystems.com.br http://code.ossystems.com.br
Mobile: +55 (53) 9981-7854 Mobile: +1 (347) 903-9750
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: Direct FB 1.7 examples failing on imx6 with 3.10 kernel image
2014-10-20 13:19 ` Otavio Salvador
@ 2014-10-20 13:24 ` Subodh Chiwate
2014-10-20 13:31 ` Otavio Salvador
0 siblings, 1 reply; 10+ messages in thread
From: Subodh Chiwate @ 2014-10-20 13:24 UTC (permalink / raw)
To: Otavio Salvador; +Cc: meta-freescale@yoctoproject.org
Imx6Q Sabre SD
Image built using the instructions from
http://git.freescale.com/git/cgit.cgi/imx/fsl-arm-yocto-bsp.git/tree/README?h=imx-3.10.31-1.1.0_beta
Do I need to take some previous branch fro stability ??
On 10/20/2014 06:49 PM, Otavio Salvador wrote:
> On Mon, Oct 20, 2014 at 3:29 AM, Subodh Chiwate
> <subodh.chiwate@ufomoviez.com> wrote:
>> Just found some more information from strace if df_dok.
> Which board is it?
>
--
Regards,
Subodh
-- **************** CAUTION - Disclaimer ***************** This e-mail contains PRIVILEGED AND CONFIDENTIAL INFORMATION intended solely for the use of the addressee(s). If you are not the intended recipient, please notify the sender by e-mail and delete the original message. Further, you are not to copy, disclose, or distribute this e-mail or its contents to any other person and any such actions are unlawful. This e-mail may contain viruses. UFOMoviez India Ltd. has taken every reasonable precaution to minimize this risk, but is not liable for any damage you may sustain as a result of any virus in this e-mail. You should carry out your own virus checks before opening the e-mail or attachment. UFOMoviez India Ltd. reserves the right to monitor and review the content of all messages sent to or from this e-mail address. Messages sent to or from this e-mail address may be stored on the UFOMoviez India Ltd.'s e-mail system. ***************** End of Disclaimer *******************
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: Direct FB 1.7 examples failing on imx6 with 3.10 kernel image
2014-10-20 13:24 ` Subodh Chiwate
@ 2014-10-20 13:31 ` Otavio Salvador
2014-10-20 13:37 ` Subodh Chiwate
0 siblings, 1 reply; 10+ messages in thread
From: Otavio Salvador @ 2014-10-20 13:31 UTC (permalink / raw)
To: Subodh Chiwate; +Cc: meta-freescale@yoctoproject.org
On Mon, Oct 20, 2014 at 11:24 AM, Subodh Chiwate
<subodh.chiwate@ufomoviez.com> wrote:
> Imx6Q Sabre SD
> Image built using the instructions from
> http://git.freescale.com/git/cgit.cgi/imx/fsl-arm-yocto-bsp.git/tree/README?h=imx-3.10.31-1.1.0_beta
>
> Do I need to take some previous branch fro stability ??
I don't use Freescale's release so I cannot say if it is working or
not. In either case, you could download our image in the current
stable release at:
http://ci.ossystems.com.br/public/fsl-community-bsp/daisy/62/directfb
and give it a try.
--
Otavio Salvador O.S. Systems
http://www.ossystems.com.br http://code.ossystems.com.br
Mobile: +55 (53) 9981-7854 Mobile: +1 (347) 903-9750
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: Direct FB 1.7 examples failing on imx6 with 3.10 kernel image
2014-10-20 13:31 ` Otavio Salvador
@ 2014-10-20 13:37 ` Subodh Chiwate
2014-10-20 13:45 ` Otavio Salvador
0 siblings, 1 reply; 10+ messages in thread
From: Subodh Chiwate @ 2014-10-20 13:37 UTC (permalink / raw)
To: Otavio Salvador; +Cc: meta-freescale@yoctoproject.org
Thanks will try that.
Does this one include gstreamer 1.0.
If not, when do you roughly expect your gst 1.0 patch to be included in
dowload image?
On 10/20/2014 07:01 PM, Otavio Salvador wrote:
> On Mon, Oct 20, 2014 at 11:24 AM, Subodh Chiwate
> <subodh.chiwate@ufomoviez.com> wrote:
>> Imx6Q Sabre SD
>> Image built using the instructions from
>> http://git.freescale.com/git/cgit.cgi/imx/fsl-arm-yocto-bsp.git/tree/README?h=imx-3.10.31-1.1.0_beta
>>
>> Do I need to take some previous branch fro stability ??
> I don't use Freescale's release so I cannot say if it is working or
> not. In either case, you could download our image in the current
> stable release at:
>
> http://ci.ossystems.com.br/public/fsl-community-bsp/daisy/62/directfb
>
> and give it a try.
>
--
Regards,
Subodh
-- **************** CAUTION - Disclaimer ***************** This e-mail contains PRIVILEGED AND CONFIDENTIAL INFORMATION intended solely for the use of the addressee(s). If you are not the intended recipient, please notify the sender by e-mail and delete the original message. Further, you are not to copy, disclose, or distribute this e-mail or its contents to any other person and any such actions are unlawful. This e-mail may contain viruses. UFOMoviez India Ltd. has taken every reasonable precaution to minimize this risk, but is not liable for any damage you may sustain as a result of any virus in this e-mail. You should carry out your own virus checks before opening the e-mail or attachment. UFOMoviez India Ltd. reserves the right to monitor and review the content of all messages sent to or from this e-mail address. Messages sent to or from this e-mail address may be stored on the UFOMoviez India Ltd.'s e-mail system. ***************** End of Disclaimer *******************
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: Direct FB 1.7 examples failing on imx6 with 3.10 kernel image
2014-10-20 13:37 ` Subodh Chiwate
@ 2014-10-20 13:45 ` Otavio Salvador
2014-10-20 13:52 ` Subodh Chiwate
0 siblings, 1 reply; 10+ messages in thread
From: Otavio Salvador @ 2014-10-20 13:45 UTC (permalink / raw)
To: Subodh Chiwate; +Cc: meta-freescale@yoctoproject.org
On Mon, Oct 20, 2014 at 11:37 AM, Subodh Chiwate
<subodh.chiwate@ufomoviez.com> wrote:
> Thanks will try that.
> Does this one include gstreamer 1.0.
No.
> If not, when do you roughly expect your gst 1.0 patch to be included in
> dowload image?
I am working on two fixes for release and than I can look again on this.
--
Otavio Salvador O.S. Systems
http://www.ossystems.com.br http://code.ossystems.com.br
Mobile: +55 (53) 9981-7854 Mobile: +1 (347) 903-9750
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: Direct FB 1.7 examples failing on imx6 with 3.10 kernel image
2014-10-20 13:45 ` Otavio Salvador
@ 2014-10-20 13:52 ` Subodh Chiwate
0 siblings, 0 replies; 10+ messages in thread
From: Subodh Chiwate @ 2014-10-20 13:52 UTC (permalink / raw)
To: Otavio Salvador; +Cc: meta-freescale@yoctoproject.org
Okay. Will work with current image to resolve other gst independent
tasks on my side.
Thanks.
On 10/20/2014 07:15 PM, Otavio Salvador wrote:
> On Mon, Oct 20, 2014 at 11:37 AM, Subodh Chiwate
> <subodh.chiwate@ufomoviez.com> wrote:
>> Thanks will try that.
>> Does this one include gstreamer 1.0.
> No.
>
>> If not, when do you roughly expect your gst 1.0 patch to be included in
>> dowload image?
> I am working on two fixes for release and than I can look again on this.
>
--
Regards,
Subodh
-- **************** CAUTION - Disclaimer ***************** This e-mail contains PRIVILEGED AND CONFIDENTIAL INFORMATION intended solely for the use of the addressee(s). If you are not the intended recipient, please notify the sender by e-mail and delete the original message. Further, you are not to copy, disclose, or distribute this e-mail or its contents to any other person and any such actions are unlawful. This e-mail may contain viruses. UFOMoviez India Ltd. has taken every reasonable precaution to minimize this risk, but is not liable for any damage you may sustain as a result of any virus in this e-mail. You should carry out your own virus checks before opening the e-mail or attachment. UFOMoviez India Ltd. reserves the right to monitor and review the content of all messages sent to or from this e-mail address. Messages sent to or from this e-mail address may be stored on the UFOMoviez India Ltd.'s e-mail system. ***************** End of Disclaimer *******************
^ permalink raw reply [flat|nested] 10+ messages in thread
end of thread, other threads:[~2014-10-20 13:52 UTC | newest]
Thread overview: 10+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2014-10-17 11:33 Direct FB 1.7 examples failing on imx6 with 3.10 kernel image Subodh Chiwate
2014-10-17 14:07 ` Daiane Angolini
2014-10-20 5:06 ` Subodh Chiwate
2014-10-20 5:29 ` Subodh Chiwate
2014-10-20 13:19 ` Otavio Salvador
2014-10-20 13:24 ` Subodh Chiwate
2014-10-20 13:31 ` Otavio Salvador
2014-10-20 13:37 ` Subodh Chiwate
2014-10-20 13:45 ` Otavio Salvador
2014-10-20 13:52 ` Subodh Chiwate
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.