* [U-Boot] compile issue with U-boot-2014.10-rc2 & Cubieboard @ 2014-09-30 1:29 Tom Everett 2014-10-01 15:31 ` Jeroen Hofstee 0 siblings, 1 reply; 5+ messages in thread From: Tom Everett @ 2014-09-30 1:29 UTC (permalink / raw) To: u-boot I am getting this compile error: scripts/Makefile.build:55: /tank/home/tom/freebsd/uboot/u-boot-2014.10-rc2/board/amd/sunxi/Makefile: No such file or directory gmake[1]: *** No rule to make target `/tank/home/tom/freebsd/uboot/u-boot-2014.10-rc2/board/amd/sunxi/Makefile'. Stop. It appears that the dir "/board/amd/sunxi" does not exist. It should be "/board/sunxi". -- A better world shall emerge based on faith and understanding - Douglas MacArthur ^ permalink raw reply [flat|nested] 5+ messages in thread
* [U-Boot] compile issue with U-boot-2014.10-rc2 & Cubieboard 2014-09-30 1:29 [U-Boot] compile issue with U-boot-2014.10-rc2 & Cubieboard Tom Everett @ 2014-10-01 15:31 ` Jeroen Hofstee 2014-10-19 14:28 ` Jeroen Hofstee 0 siblings, 1 reply; 5+ messages in thread From: Jeroen Hofstee @ 2014-10-01 15:31 UTC (permalink / raw) To: u-boot Hello Tom, On 30-09-14 03:29, Tom Everett wrote: > I am getting this compile error: > > scripts/Makefile.build:55: > /tank/home/tom/freebsd/uboot/u-boot-2014.10-rc2/board/amd/sunxi/Makefile: > No such file or directory > > gmake[1]: *** No rule to make target > `/tank/home/tom/freebsd/uboot/u-boot-2014.10-rc2/board/amd/sunxi/Makefile'. > Stop. > > It appears that the dir "/board/amd/sunxi" does not exist. It should be > "/board/sunxi". > > Your problem description does not contain enough information to reproduce / understand your problem. e.g. are you trying to compile for a FreeBSD target or on a FreeBSD host? make commands are missing as well. Anyway, current master be9f643ae, with this patch: http://patchwork.ozlabs.org/patch/395588/ should compile fine on a FreeBSD host (11-currentish). Regards, Jeroen sudo pkg install gcc-arm-embedded export PATH=/usr/local/gcc-arm-embedded-4_8-2014q2-20140609/bin/:$PATH export CROSS_COMPILE=arm-none-eabi- gmake Cubieboard_defconfig gmake all ^ permalink raw reply [flat|nested] 5+ messages in thread
* [U-Boot] compile issue with U-boot-2014.10-rc2 & Cubieboard 2014-10-01 15:31 ` Jeroen Hofstee @ 2014-10-19 14:28 ` Jeroen Hofstee 2014-10-20 19:01 ` Jeroen Hofstee 0 siblings, 1 reply; 5+ messages in thread From: Jeroen Hofstee @ 2014-10-19 14:28 UTC (permalink / raw) To: u-boot Hello Tom, On 01-10-14 17:31, Jeroen Hofstee wrote: > > On 30-09-14 03:29, Tom Everett wrote: >> I am getting this compile error: >> >> scripts/Makefile.build:55: >> /tank/home/tom/freebsd/uboot/u-boot-2014.10-rc2/board/amd/sunxi/Makefile: >> >> No such file or directory >> >> gmake[1]: *** No rule to make target >> `/tank/home/tom/freebsd/uboot/u-boot-2014.10-rc2/board/amd/sunxi/Makefile'. >> >> Stop. >> >> It appears that the dir "/board/amd/sunxi" does not exist. It should be >> "/board/sunxi". >> >> > I stumbled upon the same problem, on FreeBSD, the root user seems to have an VENDOR=amd env hanging around, hence u-boot's Makefile cannot assign the correct value. (or it would need override at least). Regards, Jeroen ^ permalink raw reply [flat|nested] 5+ messages in thread
* [U-Boot] compile issue with U-boot-2014.10-rc2 & Cubieboard 2014-10-19 14:28 ` Jeroen Hofstee @ 2014-10-20 19:01 ` Jeroen Hofstee 2014-10-21 4:22 ` Masahiro Yamada 0 siblings, 1 reply; 5+ messages in thread From: Jeroen Hofstee @ 2014-10-20 19:01 UTC (permalink / raw) To: u-boot Hello Masahiro, On 19-10-14 16:28, Jeroen Hofstee wrote: > Hello Tom, > > On 01-10-14 17:31, Jeroen Hofstee wrote: >> >> On 30-09-14 03:29, Tom Everett wrote: >>> I am getting this compile error: >>> >>> scripts/Makefile.build:55: >>> /tank/home/tom/freebsd/uboot/u-boot-2014.10-rc2/board/amd/sunxi/Makefile: >>> >>> No such file or directory >>> >>> gmake[1]: *** No rule to make target >>> `/tank/home/tom/freebsd/uboot/u-boot-2014.10-rc2/board/amd/sunxi/Makefile'. >>> >>> Stop. >>> >>> It appears that the dir "/board/amd/sunxi" does not exist. It >>> should be >>> "/board/sunxi". >>> >>> >> > > I stumbled upon the same problem, on FreeBSD, the root user seems > to have an VENDOR=amd env hanging around, hence u-boot's Makefile > cannot assign the correct value. (or it would need override at least). > I have a hard time understanding what exactly is going on here. It has nothing to do with the type of shell / OS. e.g. linux/bash behaves exactly the same with: export VENDOR=toasted make wandboard_quad_config all scripts/Makefile.build:55: /home/jeroen/software/u-boot/board/toasted/wandboard/Makefile: No such file or directory make[1]: *** No rule to make target `/home/jeroen/software/u-boot/board/toasted/wandboard/Makefile'. Stop. The slightly shorter (in time) version below, shows similar behavior. make distclean wandboard_quad_config include/config.h && cat include/config.h This would make sense if I did `make VENDOR=toasted`, but that is not the case. Can you shed some light on this, how does make end up using the version of the original shell? And how can that be prevented? Thanks, Jeroen ^ permalink raw reply [flat|nested] 5+ messages in thread
* [U-Boot] compile issue with U-boot-2014.10-rc2 & Cubieboard 2014-10-20 19:01 ` Jeroen Hofstee @ 2014-10-21 4:22 ` Masahiro Yamada 0 siblings, 0 replies; 5+ messages in thread From: Masahiro Yamada @ 2014-10-21 4:22 UTC (permalink / raw) To: u-boot Hi Tom and Jeroen, On Mon, 20 Oct 2014 21:01:47 +0200 Jeroen Hofstee <jeroen@myspectrum.nl> wrote: > Hello Masahiro, > > On 19-10-14 16:28, Jeroen Hofstee wrote: > > Hello Tom, > > > > On 01-10-14 17:31, Jeroen Hofstee wrote: > >> > >> On 30-09-14 03:29, Tom Everett wrote: > >>> I am getting this compile error: > >>> > >>> scripts/Makefile.build:55: > >>> /tank/home/tom/freebsd/uboot/u-boot-2014.10-rc2/board/amd/sunxi/Makefile: >>> > >>> No such file or directory > >>> > >>> gmake[1]: *** No rule to make target > >>> `/tank/home/tom/freebsd/uboot/u-boot-2014.10-rc2/board/amd/sunxi/Makefile'. >>> > >>> Stop. > >>> > >>> It appears that the dir "/board/amd/sunxi" does not exist. It >>> should be > >>> "/board/sunxi". > >>> > >>> > >> > > > > I stumbled upon the same problem, on FreeBSD, the root user seems > > to have an VENDOR=amd env hanging around, hence u-boot's Makefile > > cannot assign the correct value. (or it would need override at least). > > > > I have a hard time understanding what exactly is going on here. > It has nothing to do with the type of shell / OS. e.g. linux/bash behaves > exactly the same with: > > export VENDOR=toasted > make wandboard_quad_config all > > scripts/Makefile.build:55: /home/jeroen/software/u-boot/board/toasted/wandboard/Makefile: No such file or directory > make[1]: *** No rule to make target `/home/jeroen/software/u-boot/board/toasted/wandboard/Makefile'. Stop. > > The slightly shorter (in time) version below, shows similar behavior. > make distclean wandboard_quad_config include/config.h && cat include/config.h > > This would make sense if I did `make VENDOR=toasted`, but that is not > the case. Can you shed some light on this, how does make end up using > the version of the original shell? And how can that be prevented? > Sorry, this seems a bug. Can you please check if this patch solve your problem? http://patchwork.ozlabs.org/patch/401315/ Best Regards Masahiro Yamada ^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2014-10-21 4:22 UTC | newest] Thread overview: 5+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2014-09-30 1:29 [U-Boot] compile issue with U-boot-2014.10-rc2 & Cubieboard Tom Everett 2014-10-01 15:31 ` Jeroen Hofstee 2014-10-19 14:28 ` Jeroen Hofstee 2014-10-20 19:01 ` Jeroen Hofstee 2014-10-21 4:22 ` Masahiro Yamada
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.