All of lore.kernel.org
 help / color / mirror / Atom feed
From: Chanwoo Choi <cw00.choi@samsung.com>
To: Sylwester Nawrocki <s.nawrocki@samsung.com>
Cc: linux-samsung-soc@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org, kgene.kim@samsung.com,
	ben-linux@fluff.org, linux@arm.linux.org.uk,
	mark.rutland@arm.com, arnd@arndb.de, olof@lixom.net,
	tomasz.figa@gmail.com, mturquette@linaro.org,
	thomas.abraham@linaro.org, linus.walleij@linaro.org,
	sw0312.kim@samsung.com, kyungmin.park@samsung.com,
	inki.dae@samsung.com, geunsik.lim@samsung.com,
	jh80.chung@samsung.com, jaewon02.kim@samsung.com,
	ideal.song@samsung.com, yj44.cho@samsung.com
Subject: Re: [PATCH 3/5] clk: samsung: Document binding for Exynos4415 clock controller
Date: Fri, 24 Oct 2014 19:34:54 +0900	[thread overview]
Message-ID: <544A2B4E.8090604@samsung.com> (raw)
In-Reply-To: <544A2AA5.3020407@samsung.com>

Hi Sylwester,

On 10/24/2014 07:32 PM, Sylwester Nawrocki wrote:
> On 20/10/14 05:32, Chanwoo Choi wrote:
>> The Exynos4415 clocks are statically listed and registered using the
>> Samsung specific common clock helper functions. Both device tree based
>> clock lookup and clkdev based clock lookups are supported.
> 
> I think the above text is not relevant, DT binding is not supposed
> to depend on any OS. Instead I would just put here something like:
> 
> "This patch adds DT binding documentation for Exynos4415 SoC system
> clock controllers."

OK, I will modify it as your comment.

> 
>> Cc: Sylwester Nawrocki <s.nawrocki@samsung.com>
>> Cc: Tomasz Figa <tomasz.figa@gmail.com>
>> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
>> Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
>> ---
>>  .../devicetree/bindings/clock/exynos4415-clock.txt | 49 ++++++++++++++++++++++
>>  1 file changed, 49 insertions(+)
>>  create mode 100644 Documentation/devicetree/bindings/clock/exynos4415-clock.txt
>>
>> diff --git a/Documentation/devicetree/bindings/clock/exynos4415-clock.txt b/Documentation/devicetree/bindings/clock/exynos4415-clock.txt
>> new file mode 100644
>> index 0000000..8aa4f4f
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/clock/exynos4415-clock.txt
>> @@ -0,0 +1,49 @@
>> +* Samsung Exynos4415 Clock Controller
>> +
>> +The Exynos4415 clock controller generates and supplies clock to various
>> +controllers within the Exynos4415 SoC.
> 
> s/controllers/consumer devices/ ?
> 
>> +
>> +Required Properties:
> 
> s/P/p/ ?

I'll fix it.

> 
>> +
>> +- compatible: should be one of the following.
> 
> s/./:/ ?

I will change it (. -> :)

> 
>> +  - "samsung,exynos4415-cmu" - controller compatible with Exynos4415 SoC.
> 
>>From current description it seems "samsung,exynos4415-cmu-dmc" is compatible
> with "samsung,exynos4415-cmu", which is not the case AFAIK.
> Perhaps we should change description here to something along the lines of:
> 
> - "samsung,exynos4415-cmu" - for the main system clocks controller
>   (CMU_LEFTBUS, CMU_RIGHTBUS, CMU_TOP, CMU_CPU clock domains),
> 
>> +  - "samsung,exynos4415-cmu-dmc" - controller compatible with
>> +    Exynos4415 SoC for Dynamic Memory Controller domain.
> 
> This seems unclear, how about
> 
>  - "samsung,exynos4415-cmu-dmc" - for the Exynos4415 SoC DRAM Memory
>     Controller (DMC) domain clock controller.
> 
> ?

OK, I'll modify it

>> +- reg: physical base address of the controller and length of memory mapped
>> +  region.
>> +
>> +- #clock-cells: should be 1.
>> +
>> +Each clock is assigned an identifier and client nodes can use this identifier
>> +to specify the clock which they consume.
>> +
>> +All available clocks are defined as preprocessor macros in
>> +dt-bindings/clock/exynos4415.h header and can be used in device
>> +tree sources.
> 
>> +Example 1: An example of a clock controller node is listed below.
>> +
>> +	cmu: clock-controller@10030000 {
>> +		compatible = "samsung,exynos4415-cmu";
>> +		reg = <0x10030000 0x18000>;
>> +		#clock-cells = <1>;
>> +	};
>> +
>> +	cmu-dmc: clock-controller@105C0000 {
>> +		compatible = "samsung,exynos4415-cmu-dmc";
>> +		reg = <0x105C0000 0x3000>;
>> +		#clock-cells = <1>;
>> +	};
>> +
>> +Example 2: UART controller node that consumes the clock generated by the clock
>> +	   controller. Refer to the standard clock bindings for information
>> +	   about 'clocks' and 'clock-names' property.
>> +
>> +	serial_0: serial@13800000 {
>> +		compatible = "samsung,exynos4210-uart";
>> +		reg = <0x13800000 0x100>;
>> +		interrupts = <0 109 0>;
>> +		clocks = <&cmu CLK_UART0>, <&cmu CLK_SCLK_UART0>;
>> +		clock-names = "uart", "clk_uart_baud0";
>> +	};
> 
> I think we could omit those example snippets, it's all generic stuff and
> there is already plenty examples in descriptions of the DT binding for
> other SoCs.

OK, I'll drop this example.

Thanks for your review.

Best Regards,
Chanwoo Choi

> 
> --
> Regards,
> Sylwester
> 

WARNING: multiple messages have this Message-ID (diff)
From: cw00.choi@samsung.com (Chanwoo Choi)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 3/5] clk: samsung: Document binding for Exynos4415 clock controller
Date: Fri, 24 Oct 2014 19:34:54 +0900	[thread overview]
Message-ID: <544A2B4E.8090604@samsung.com> (raw)
In-Reply-To: <544A2AA5.3020407@samsung.com>

Hi Sylwester,

On 10/24/2014 07:32 PM, Sylwester Nawrocki wrote:
> On 20/10/14 05:32, Chanwoo Choi wrote:
>> The Exynos4415 clocks are statically listed and registered using the
>> Samsung specific common clock helper functions. Both device tree based
>> clock lookup and clkdev based clock lookups are supported.
> 
> I think the above text is not relevant, DT binding is not supposed
> to depend on any OS. Instead I would just put here something like:
> 
> "This patch adds DT binding documentation for Exynos4415 SoC system
> clock controllers."

OK, I will modify it as your comment.

> 
>> Cc: Sylwester Nawrocki <s.nawrocki@samsung.com>
>> Cc: Tomasz Figa <tomasz.figa@gmail.com>
>> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
>> Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
>> ---
>>  .../devicetree/bindings/clock/exynos4415-clock.txt | 49 ++++++++++++++++++++++
>>  1 file changed, 49 insertions(+)
>>  create mode 100644 Documentation/devicetree/bindings/clock/exynos4415-clock.txt
>>
>> diff --git a/Documentation/devicetree/bindings/clock/exynos4415-clock.txt b/Documentation/devicetree/bindings/clock/exynos4415-clock.txt
>> new file mode 100644
>> index 0000000..8aa4f4f
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/clock/exynos4415-clock.txt
>> @@ -0,0 +1,49 @@
>> +* Samsung Exynos4415 Clock Controller
>> +
>> +The Exynos4415 clock controller generates and supplies clock to various
>> +controllers within the Exynos4415 SoC.
> 
> s/controllers/consumer devices/ ?
> 
>> +
>> +Required Properties:
> 
> s/P/p/ ?

I'll fix it.

> 
>> +
>> +- compatible: should be one of the following.
> 
> s/./:/ ?

I will change it (. -> :)

> 
>> +  - "samsung,exynos4415-cmu" - controller compatible with Exynos4415 SoC.
> 
>>From current description it seems "samsung,exynos4415-cmu-dmc" is compatible
> with "samsung,exynos4415-cmu", which is not the case AFAIK.
> Perhaps we should change description here to something along the lines of:
> 
> - "samsung,exynos4415-cmu" - for the main system clocks controller
>   (CMU_LEFTBUS, CMU_RIGHTBUS, CMU_TOP, CMU_CPU clock domains),
> 
>> +  - "samsung,exynos4415-cmu-dmc" - controller compatible with
>> +    Exynos4415 SoC for Dynamic Memory Controller domain.
> 
> This seems unclear, how about
> 
>  - "samsung,exynos4415-cmu-dmc" - for the Exynos4415 SoC DRAM Memory
>     Controller (DMC) domain clock controller.
> 
> ?

OK, I'll modify it

>> +- reg: physical base address of the controller and length of memory mapped
>> +  region.
>> +
>> +- #clock-cells: should be 1.
>> +
>> +Each clock is assigned an identifier and client nodes can use this identifier
>> +to specify the clock which they consume.
>> +
>> +All available clocks are defined as preprocessor macros in
>> +dt-bindings/clock/exynos4415.h header and can be used in device
>> +tree sources.
> 
>> +Example 1: An example of a clock controller node is listed below.
>> +
>> +	cmu: clock-controller at 10030000 {
>> +		compatible = "samsung,exynos4415-cmu";
>> +		reg = <0x10030000 0x18000>;
>> +		#clock-cells = <1>;
>> +	};
>> +
>> +	cmu-dmc: clock-controller at 105C0000 {
>> +		compatible = "samsung,exynos4415-cmu-dmc";
>> +		reg = <0x105C0000 0x3000>;
>> +		#clock-cells = <1>;
>> +	};
>> +
>> +Example 2: UART controller node that consumes the clock generated by the clock
>> +	   controller. Refer to the standard clock bindings for information
>> +	   about 'clocks' and 'clock-names' property.
>> +
>> +	serial_0: serial at 13800000 {
>> +		compatible = "samsung,exynos4210-uart";
>> +		reg = <0x13800000 0x100>;
>> +		interrupts = <0 109 0>;
>> +		clocks = <&cmu CLK_UART0>, <&cmu CLK_SCLK_UART0>;
>> +		clock-names = "uart", "clk_uart_baud0";
>> +	};
> 
> I think we could omit those example snippets, it's all generic stuff and
> there is already plenty examples in descriptions of the DT binding for
> other SoCs.

OK, I'll drop this example.

Thanks for your review.

Best Regards,
Chanwoo Choi

> 
> --
> Regards,
> Sylwester
> 

  reply	other threads:[~2014-10-24 10:34 UTC|newest]

Thread overview: 42+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-10-20  3:29 [PATCH 0/5] Support new Exynos4415 SoC based on Cortex-A9 quad cores Chanwoo Choi
2014-10-20  3:29 ` Chanwoo Choi
2014-10-20  3:32 ` [PATCH 1/5] ARM: EXYNOS: Add EXYNOS4415 SoC ID Chanwoo Choi
2014-10-20  3:32   ` Chanwoo Choi
2014-10-24 11:43   ` Tomasz Figa
2014-10-24 11:43     ` Tomasz Figa
2014-10-24 11:46     ` Chanwoo Choi
2014-10-24 11:46       ` Chanwoo Choi
2014-10-20  3:32 ` [PATCH 2/5] clk: samsung: exynos4415: Add clocks using common clock framework Chanwoo Choi
2014-10-20  3:32   ` Chanwoo Choi
2014-10-24 10:54   ` Sylwester Nawrocki
2014-10-24 10:54     ` Sylwester Nawrocki
2014-10-24 10:59     ` Chanwoo Choi
2014-10-24 10:59       ` Chanwoo Choi
2014-10-24 13:18   ` Daniel Drake
2014-10-24 13:18     ` Daniel Drake
2014-10-24 13:28     ` Tomasz Figa
2014-10-24 13:28       ` Tomasz Figa
2014-10-24 13:36     ` Chanwoo Choi
2014-10-24 13:36       ` Chanwoo Choi
2014-10-24 13:56     ` Sylwester Nawrocki
2014-10-24 13:56       ` Sylwester Nawrocki
2014-10-20  3:32 ` [PATCH 3/5] clk: samsung: Document binding for Exynos4415 clock controller Chanwoo Choi
2014-10-20  3:32   ` Chanwoo Choi
2014-10-24 10:32   ` Sylwester Nawrocki
2014-10-24 10:32     ` Sylwester Nawrocki
2014-10-24 10:34     ` Chanwoo Choi [this message]
2014-10-24 10:34       ` Chanwoo Choi
2014-10-20  3:32 ` [PATCH 4/5] pinctrl: exynos: Add support for Exynos4415 Chanwoo Choi
2014-10-20  3:32   ` Chanwoo Choi
2014-10-20  3:32 ` [PATCH 5/5] ARM: dts: Add dts files for Exynos4415 SoC Chanwoo Choi
2014-10-20  3:32   ` Chanwoo Choi
2014-10-24 13:23   ` Daniel Drake
2014-10-24 13:23     ` Daniel Drake
2014-10-24 13:30     ` Tomasz Figa
2014-10-24 13:30       ` Tomasz Figa
2014-10-24 13:34     ` Marek Szyprowski
2014-10-24 13:34       ` Marek Szyprowski
2014-10-24 13:44       ` Daniel Drake
2014-10-24 13:44         ` Daniel Drake
2014-10-24 13:53     ` Chanwoo Choi
2014-10-24 13:53       ` Chanwoo Choi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=544A2B4E.8090604@samsung.com \
    --to=cw00.choi@samsung.com \
    --cc=arnd@arndb.de \
    --cc=ben-linux@fluff.org \
    --cc=geunsik.lim@samsung.com \
    --cc=ideal.song@samsung.com \
    --cc=inki.dae@samsung.com \
    --cc=jaewon02.kim@samsung.com \
    --cc=jh80.chung@samsung.com \
    --cc=kgene.kim@samsung.com \
    --cc=kyungmin.park@samsung.com \
    --cc=linus.walleij@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-samsung-soc@vger.kernel.org \
    --cc=linux@arm.linux.org.uk \
    --cc=mark.rutland@arm.com \
    --cc=mturquette@linaro.org \
    --cc=olof@lixom.net \
    --cc=s.nawrocki@samsung.com \
    --cc=sw0312.kim@samsung.com \
    --cc=thomas.abraham@linaro.org \
    --cc=tomasz.figa@gmail.com \
    --cc=yj44.cho@samsung.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.