All of lore.kernel.org
 help / color / mirror / Atom feed
From: gang.chen.5i5j@gmail.com (Chen Gang)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH] drivers: net: ethernet: xilinx: xilinx_emaclite: Compatible with 'xlnx,xps-ethernetlite-2.00.b' for QEMU using
Date: Sat, 01 Nov 2014 11:59:53 +0800	[thread overview]
Message-ID: <54545AB9.70206@gmail.com> (raw)
In-Reply-To: <54544E98.4060007@gmail.com>

On 11/1/14 11:08, Chen Gang wrote:
> When use current latest upstream qemu (current version: 2.1.2), need let
> driver compatible with 'xlnx,xps-ethernetlite-2.00.b', or can not find
> net device in microblaze qemu. Related QEMU commands under fedora 20:
> 
>   yum install libvirt
>   yum install tunctl
>   tunctl -b
>   ip link set tap0 up
>   brctl addif virbr0 tap0
>   ./microblaze-softmmu/qemu-system-microblaze -M petalogix-s3adsp1800 \
>     -kernel ../linux-stable.microblaze/arch/microblaze/boot/linux.bin \
>     -no-reboot -append "console=ttyUL0,115200 doreboot" -nographic \
>     -net nic,vlan=0,model=xlnx.xps-ethernetlite,macaddr=00:16:35:AF:94:00 \
>     -net tap,vlan=0,ifname=tap0,script=no,downscript=no
> 
>   in microblaze qemu bash (guest machine):
> 
>     ifconfig eth0 add 192.168.122.1 netmask 255.255.255.0

Oh, sorry, it is 192.168.122.2 (192.168.122.1 is the router address).

Thanks.

>     ifconfig eth0 up
> 
> After add this patch, can find the device, and can be used by 'telnetd'
> (need cross-build busybox with glibc for it), then outside can telnet to
> it without password.
> 
> Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com>
> ---
>  drivers/net/ethernet/xilinx/xilinx_emaclite.c | 1 +
>  1 file changed, 1 insertion(+)
> 
> diff --git a/drivers/net/ethernet/xilinx/xilinx_emaclite.c b/drivers/net/ethernet/xilinx/xilinx_emaclite.c
> index 28dbbdc..298fad3 100644
> --- a/drivers/net/ethernet/xilinx/xilinx_emaclite.c
> +++ b/drivers/net/ethernet/xilinx/xilinx_emaclite.c
> @@ -1236,6 +1236,7 @@ static struct of_device_id xemaclite_of_match[] = {
>  	{ .compatible = "xlnx,opb-ethernetlite-1.01.b", },
>  	{ .compatible = "xlnx,xps-ethernetlite-1.00.a", },
>  	{ .compatible = "xlnx,xps-ethernetlite-2.00.a", },
> +	{ .compatible = "xlnx,xps-ethernetlite-2.00.b", },
>  	{ .compatible = "xlnx,xps-ethernetlite-2.01.a", },
>  	{ .compatible = "xlnx,xps-ethernetlite-3.00.a", },
>  	{ /* end of list */ },
> 

-- 
Chen Gang

Open, share, and attitude like air, water, and life which God blessed

WARNING: multiple messages have this Message-ID (diff)
From: Chen Gang <gang.chen.5i5j@gmail.com>
To: michal.simek@xilinx.com, soren.brinkmann@xilinx.com
Cc: davem@davemloft.net, sthokal@xilinx.com,
	manuel.schoelling@gmx.de, paul.gortmaker@windriver.com,
	f.fainelli@gmail.com, ebiederm@xmission.com,
	netdev@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH] drivers: net: ethernet: xilinx: xilinx_emaclite: Compatible with 'xlnx,xps-ethernetlite-2.00.b' for QEMU using
Date: Sat, 01 Nov 2014 11:59:53 +0800	[thread overview]
Message-ID: <54545AB9.70206@gmail.com> (raw)
In-Reply-To: <54544E98.4060007@gmail.com>

On 11/1/14 11:08, Chen Gang wrote:
> When use current latest upstream qemu (current version: 2.1.2), need let
> driver compatible with 'xlnx,xps-ethernetlite-2.00.b', or can not find
> net device in microblaze qemu. Related QEMU commands under fedora 20:
> 
>   yum install libvirt
>   yum install tunctl
>   tunctl -b
>   ip link set tap0 up
>   brctl addif virbr0 tap0
>   ./microblaze-softmmu/qemu-system-microblaze -M petalogix-s3adsp1800 \
>     -kernel ../linux-stable.microblaze/arch/microblaze/boot/linux.bin \
>     -no-reboot -append "console=ttyUL0,115200 doreboot" -nographic \
>     -net nic,vlan=0,model=xlnx.xps-ethernetlite,macaddr=00:16:35:AF:94:00 \
>     -net tap,vlan=0,ifname=tap0,script=no,downscript=no
> 
>   in microblaze qemu bash (guest machine):
> 
>     ifconfig eth0 add 192.168.122.1 netmask 255.255.255.0

Oh, sorry, it is 192.168.122.2 (192.168.122.1 is the router address).

Thanks.

>     ifconfig eth0 up
> 
> After add this patch, can find the device, and can be used by 'telnetd'
> (need cross-build busybox with glibc for it), then outside can telnet to
> it without password.
> 
> Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com>
> ---
>  drivers/net/ethernet/xilinx/xilinx_emaclite.c | 1 +
>  1 file changed, 1 insertion(+)
> 
> diff --git a/drivers/net/ethernet/xilinx/xilinx_emaclite.c b/drivers/net/ethernet/xilinx/xilinx_emaclite.c
> index 28dbbdc..298fad3 100644
> --- a/drivers/net/ethernet/xilinx/xilinx_emaclite.c
> +++ b/drivers/net/ethernet/xilinx/xilinx_emaclite.c
> @@ -1236,6 +1236,7 @@ static struct of_device_id xemaclite_of_match[] = {
>  	{ .compatible = "xlnx,opb-ethernetlite-1.01.b", },
>  	{ .compatible = "xlnx,xps-ethernetlite-1.00.a", },
>  	{ .compatible = "xlnx,xps-ethernetlite-2.00.a", },
> +	{ .compatible = "xlnx,xps-ethernetlite-2.00.b", },
>  	{ .compatible = "xlnx,xps-ethernetlite-2.01.a", },
>  	{ .compatible = "xlnx,xps-ethernetlite-3.00.a", },
>  	{ /* end of list */ },
> 

-- 
Chen Gang

Open, share, and attitude like air, water, and life which God blessed

  reply	other threads:[~2014-11-01  3:59 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-11-01  3:08 [PATCH] drivers: net: ethernet: xilinx: xilinx_emaclite: Compatible with 'xlnx,xps-ethernetlite-2.00.b' for QEMU using Chen Gang
2014-11-01  3:08 ` Chen Gang
2014-11-01  3:59 ` Chen Gang [this message]
2014-11-01  3:59   ` Chen Gang
2014-11-01 21:03   ` David Miller
2014-11-01 21:03     ` David Miller

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=54545AB9.70206@gmail.com \
    --to=gang.chen.5i5j@gmail.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.