* [PATCHv2 01/14] [media] cx231xx: get rid of driver-defined printk macros
2014-11-02 12:32 [PATCHv2 00/14] Reduce cx231xx verbosity and do some cleanups Mauro Carvalho Chehab
@ 2014-11-02 12:32 ` Mauro Carvalho Chehab
2014-11-02 12:32 ` [PATCHv2 02/14] [media] cx231xx: Fix identation Mauro Carvalho Chehab
` (13 subsequent siblings)
14 siblings, 0 replies; 18+ messages in thread
From: Mauro Carvalho Chehab @ 2014-11-02 12:32 UTC (permalink / raw)
To: Linux Media Mailing List
Cc: Mauro Carvalho Chehab, Mauro Carvalho Chehab, Hans Verkuil,
Laurent Pinchart, Prabhakar Lad, Ramakrishnan Muthukrishnan,
Takashi Iwai, Matthias Schwarzott, Antti Palosaari, Sakari Ailus,
Peter Senna Tschudin
It currently does just like what pr_foo() macros do. So,
replace them.
A deeper cleanup is needed, as there are lots of debug macros
printed with pr_info.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
diff --git a/drivers/media/usb/cx231xx/cx231xx-417.c b/drivers/media/usb/cx231xx/cx231xx-417.c
index 459bb0e98971..d678f4587ab4 100644
--- a/drivers/media/usb/cx231xx/cx231xx-417.c
+++ b/drivers/media/usb/cx231xx/cx231xx-417.c
@@ -24,6 +24,8 @@
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
+#include "cx231xx.h"
+
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/init.h>
@@ -39,8 +41,6 @@
#include <media/tuner.h>
#include <linux/usb.h>
-#include "cx231xx.h"
-
#define CX231xx_FIRM_IMAGE_SIZE 376836
#define CX231xx_FIRM_IMAGE_NAME "v4l-cx23885-enc.fw"
@@ -1416,7 +1416,7 @@ static int bb_buf_prepare(struct videobuf_queue *q,
if (!dev->video_mode.bulk_ctl.num_bufs)
urb_init = 1;
}
- /*cx231xx_info("urb_init=%d dev->video_mode.max_pkt_size=%d\n",
+ /*pr_info("urb_init=%d dev->video_mode.max_pkt_size=%d\n",
urb_init, dev->video_mode.max_pkt_size);*/
dev->mode_tv = 1;
diff --git a/drivers/media/usb/cx231xx/cx231xx-audio.c b/drivers/media/usb/cx231xx/cx231xx-audio.c
index 9b925874d392..8312388edabb 100644
--- a/drivers/media/usb/cx231xx/cx231xx-audio.c
+++ b/drivers/media/usb/cx231xx/cx231xx-audio.c
@@ -20,6 +20,7 @@
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
+#include "cx231xx.h"
#include <linux/kernel.h>
#include <linux/usb.h>
#include <linux/init.h>
@@ -37,7 +38,6 @@
#include <sound/initval.h>
#include <sound/control.h>
#include <media/v4l2-common.h>
-#include "cx231xx.h"
static int debug;
module_param(debug, int, 0644);
@@ -182,7 +182,7 @@ static void cx231xx_audio_isocirq(struct urb *urb)
status = usb_submit_urb(urb, GFP_ATOMIC);
if (status < 0) {
- cx231xx_errdev("resubmit of audio urb failed (error=%i)\n",
+ pr_err("resubmit of audio urb failed (error=%i)\n",
status);
}
return;
@@ -266,7 +266,7 @@ static void cx231xx_audio_bulkirq(struct urb *urb)
status = usb_submit_urb(urb, GFP_ATOMIC);
if (status < 0) {
- cx231xx_errdev("resubmit of audio urb failed (error=%i)\n",
+ pr_err("resubmit of audio urb failed (error=%i)\n",
status);
}
return;
@@ -277,7 +277,7 @@ static int cx231xx_init_audio_isoc(struct cx231xx *dev)
int i, errCode;
int sb_size;
- cx231xx_info("%s: Starting ISO AUDIO transfers\n", __func__);
+ pr_info("%s: Starting ISO AUDIO transfers\n", __func__);
if (dev->state & DEV_DISCONNECTED)
return -ENODEV;
@@ -295,7 +295,7 @@ static int cx231xx_init_audio_isoc(struct cx231xx *dev)
memset(dev->adev.transfer_buffer[i], 0x80, sb_size);
urb = usb_alloc_urb(CX231XX_ISO_NUM_AUDIO_PACKETS, GFP_ATOMIC);
if (!urb) {
- cx231xx_errdev("usb_alloc_urb failed!\n");
+ pr_err("usb_alloc_urb failed!\n");
for (j = 0; j < i; j++) {
usb_free_urb(dev->adev.urb[j]);
kfree(dev->adev.transfer_buffer[j]);
@@ -338,7 +338,7 @@ static int cx231xx_init_audio_bulk(struct cx231xx *dev)
int i, errCode;
int sb_size;
- cx231xx_info("%s: Starting BULK AUDIO transfers\n", __func__);
+ pr_info("%s: Starting BULK AUDIO transfers\n", __func__);
if (dev->state & DEV_DISCONNECTED)
return -ENODEV;
@@ -356,7 +356,7 @@ static int cx231xx_init_audio_bulk(struct cx231xx *dev)
memset(dev->adev.transfer_buffer[i], 0x80, sb_size);
urb = usb_alloc_urb(CX231XX_NUM_AUDIO_PACKETS, GFP_ATOMIC);
if (!urb) {
- cx231xx_errdev("usb_alloc_urb failed!\n");
+ pr_err("usb_alloc_urb failed!\n");
for (j = 0; j < i; j++) {
usb_free_urb(dev->adev.urb[j]);
kfree(dev->adev.transfer_buffer[j]);
@@ -439,13 +439,13 @@ static int snd_cx231xx_capture_open(struct snd_pcm_substream *substream)
dprintk("opening device and trying to acquire exclusive lock\n");
if (!dev) {
- cx231xx_errdev("BUG: cx231xx can't find device struct."
+ pr_err("BUG: cx231xx can't find device struct."
" Can't proceed with open\n");
return -ENODEV;
}
if (dev->state & DEV_DISCONNECTED) {
- cx231xx_errdev("Can't open. the device was removed.\n");
+ pr_err("Can't open. the device was removed.\n");
return -ENODEV;
}
@@ -458,7 +458,7 @@ static int snd_cx231xx_capture_open(struct snd_pcm_substream *substream)
ret = cx231xx_set_alt_setting(dev, INDEX_AUDIO, 0);
mutex_unlock(&dev->lock);
if (ret < 0) {
- cx231xx_errdev("failed to set alternate setting !\n");
+ pr_err("failed to set alternate setting !\n");
return ret;
}
@@ -494,7 +494,7 @@ static int snd_cx231xx_pcm_close(struct snd_pcm_substream *substream)
/* 1 - 48000 samples per sec */
ret = cx231xx_set_alt_setting(dev, INDEX_AUDIO, 0);
if (ret < 0) {
- cx231xx_errdev("failed to set alternate setting !\n");
+ pr_err("failed to set alternate setting !\n");
mutex_unlock(&dev->lock);
return ret;
@@ -662,7 +662,7 @@ static int cx231xx_audio_init(struct cx231xx *dev)
return 0;
}
- cx231xx_info("cx231xx-audio.c: probing for cx231xx "
+ pr_info("cx231xx-audio.c: probing for cx231xx "
"non standard usbaudio\n");
err = snd_card_new(&dev->udev->dev, index[devnr], "Cx231xx Audio",
@@ -707,12 +707,12 @@ static int cx231xx_audio_init(struct cx231xx *dev)
bEndpointAddress;
adev->num_alt = uif->num_altsetting;
- cx231xx_info("EndPoint Addr 0x%x, Alternate settings: %i\n",
+ pr_info("EndPoint Addr 0x%x, Alternate settings: %i\n",
adev->end_point_addr, adev->num_alt);
adev->alt_max_pkt_size = kmalloc(32 * adev->num_alt, GFP_KERNEL);
if (adev->alt_max_pkt_size == NULL) {
- cx231xx_errdev("out of memory!\n");
+ pr_err("out of memory!\n");
return -ENOMEM;
}
@@ -722,7 +722,7 @@ static int cx231xx_audio_init(struct cx231xx *dev)
wMaxPacketSize);
adev->alt_max_pkt_size[i] =
(tmp & 0x07ff) * (((tmp & 0x1800) >> 11) + 1);
- cx231xx_info("Alternate setting %i, max size= %i\n", i,
+ pr_info("Alternate setting %i, max size= %i\n", i,
adev->alt_max_pkt_size[i]);
}
diff --git a/drivers/media/usb/cx231xx/cx231xx-avcore.c b/drivers/media/usb/cx231xx/cx231xx-avcore.c
index 781908b5a1a3..9185b05b4fbe 100644
--- a/drivers/media/usb/cx231xx/cx231xx-avcore.c
+++ b/drivers/media/usb/cx231xx/cx231xx-avcore.c
@@ -22,6 +22,7 @@
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
+#include "cx231xx.h"
#include <linux/init.h>
#include <linux/list.h>
#include <linux/module.h>
@@ -36,7 +37,6 @@
#include <media/v4l2-common.h>
#include <media/v4l2-ioctl.h>
-#include "cx231xx.h"
#include "cx231xx-dif.h"
#define TUNER_MODE_FM_RADIO 0
@@ -83,10 +83,10 @@ void initGPIO(struct cx231xx *dev)
cx231xx_send_gpio_cmd(dev, _gpio_direction, (u8 *)&value, 4, 0, 0);
verve_read_byte(dev, 0x07, &val);
- cx231xx_info(" verve_read_byte address0x07=0x%x\n", val);
+ pr_info(" verve_read_byte address0x07=0x%x\n", val);
verve_write_byte(dev, 0x07, 0xF4);
verve_read_byte(dev, 0x07, &val);
- cx231xx_info(" verve_read_byte address0x07=0x%x\n", val);
+ pr_info(" verve_read_byte address0x07=0x%x\n", val);
cx231xx_capture_start(dev, 1, Vbi);
@@ -156,7 +156,7 @@ int cx231xx_afe_init_super_block(struct cx231xx *dev, u32 ref_count)
while (afe_power_status != 0x18) {
status = afe_write_byte(dev, SUP_BLK_PWRDN, 0x18);
if (status < 0) {
- cx231xx_info(
+ pr_info(
": Init Super Block failed in send cmd\n");
break;
}
@@ -164,13 +164,13 @@ int cx231xx_afe_init_super_block(struct cx231xx *dev, u32 ref_count)
status = afe_read_byte(dev, SUP_BLK_PWRDN, &afe_power_status);
afe_power_status &= 0xff;
if (status < 0) {
- cx231xx_info(
+ pr_info(
": Init Super Block failed in receive cmd\n");
break;
}
i++;
if (i == 10) {
- cx231xx_info(
+ pr_info(
": Init Super Block force break in loop !!!!\n");
status = -1;
break;
@@ -410,7 +410,7 @@ int cx231xx_afe_update_power_control(struct cx231xx *dev,
status |= afe_write_byte(dev, ADC_PWRDN_CLAMP_CH3,
0x00);
} else {
- cx231xx_info("Invalid AV mode input\n");
+ pr_info("Invalid AV mode input\n");
status = -1;
}
break;
@@ -467,7 +467,7 @@ int cx231xx_afe_update_power_control(struct cx231xx *dev,
status |= afe_write_byte(dev, ADC_PWRDN_CLAMP_CH3,
0x40);
} else {
- cx231xx_info("Invalid AV mode input\n");
+ pr_info("Invalid AV mode input\n");
status = -1;
}
} /* switch */
@@ -573,7 +573,7 @@ int cx231xx_set_video_input_mux(struct cx231xx *dev, u8 input)
status = cx231xx_set_power_mode(dev,
POLARIS_AVMODE_ENXTERNAL_AV);
if (status < 0) {
- cx231xx_errdev("%s: set_power_mode : Failed to"
+ pr_err("%s: set_power_mode : Failed to"
" set Power - errCode [%d]!\n",
__func__, status);
return status;
@@ -591,7 +591,7 @@ int cx231xx_set_video_input_mux(struct cx231xx *dev, u8 input)
status = cx231xx_set_power_mode(dev,
POLARIS_AVMODE_ANALOGT_TV);
if (status < 0) {
- cx231xx_errdev("%s: set_power_mode:Failed"
+ pr_err("%s: set_power_mode:Failed"
" to set Power - errCode [%d]!\n",
__func__, status);
return status;
@@ -608,7 +608,7 @@ int cx231xx_set_video_input_mux(struct cx231xx *dev, u8 input)
break;
default:
- cx231xx_errdev("%s: set_power_mode : Unknown Input %d !\n",
+ pr_err("%s: set_power_mode : Unknown Input %d !\n",
__func__, INPUT(input)->type);
break;
}
@@ -628,7 +628,7 @@ int cx231xx_set_decoder_video_input(struct cx231xx *dev,
if (pin_type != dev->video_input) {
status = cx231xx_afe_adjust_ref_count(dev, pin_type);
if (status < 0) {
- cx231xx_errdev("%s: adjust_ref_count :Failed to set"
+ pr_err("%s: adjust_ref_count :Failed to set"
"AFE input mux - errCode [%d]!\n",
__func__, status);
return status;
@@ -638,7 +638,7 @@ int cx231xx_set_decoder_video_input(struct cx231xx *dev,
/* call afe block to set video inputs */
status = cx231xx_afe_set_input_mux(dev, input);
if (status < 0) {
- cx231xx_errdev("%s: set_input_mux :Failed to set"
+ pr_err("%s: set_input_mux :Failed to set"
" AFE input mux - errCode [%d]!\n",
__func__, status);
return status;
@@ -670,7 +670,7 @@ int cx231xx_set_decoder_video_input(struct cx231xx *dev,
/* Tell DIF object to go to baseband mode */
status = cx231xx_dif_set_standard(dev, DIF_USE_BASEBAND);
if (status < 0) {
- cx231xx_errdev("%s: cx231xx_dif set to By pass"
+ pr_err("%s: cx231xx_dif set to By pass"
" mode- errCode [%d]!\n",
__func__, status);
return status;
@@ -715,7 +715,7 @@ int cx231xx_set_decoder_video_input(struct cx231xx *dev,
/* Tell DIF object to go to baseband mode */
status = cx231xx_dif_set_standard(dev, DIF_USE_BASEBAND);
if (status < 0) {
- cx231xx_errdev("%s: cx231xx_dif set to By pass"
+ pr_err("%s: cx231xx_dif set to By pass"
" mode- errCode [%d]!\n",
__func__, status);
return status;
@@ -790,7 +790,7 @@ int cx231xx_set_decoder_video_input(struct cx231xx *dev,
status = cx231xx_dif_set_standard(dev,
DIF_USE_BASEBAND);
if (status < 0) {
- cx231xx_errdev("%s: cx231xx_dif set to By pass"
+ pr_err("%s: cx231xx_dif set to By pass"
" mode- errCode [%d]!\n",
__func__, status);
return status;
@@ -826,7 +826,7 @@ int cx231xx_set_decoder_video_input(struct cx231xx *dev,
/* Reinitialize the DIF */
status = cx231xx_dif_set_standard(dev, dev->norm);
if (status < 0) {
- cx231xx_errdev("%s: cx231xx_dif set to By pass"
+ pr_err("%s: cx231xx_dif set to By pass"
" mode- errCode [%d]!\n",
__func__, status);
return status;
@@ -970,14 +970,14 @@ int cx231xx_do_mode_ctrl_overrides(struct cx231xx *dev)
{
int status = 0;
- cx231xx_info("do_mode_ctrl_overrides : 0x%x\n",
+ pr_info("do_mode_ctrl_overrides : 0x%x\n",
(unsigned int)dev->norm);
/* Change the DFE_CTRL3 bp_percent to fix flagging */
status = vid_blk_write_word(dev, DFE_CTRL3, 0xCD3F0280);
if (dev->norm & (V4L2_STD_NTSC | V4L2_STD_PAL_M)) {
- cx231xx_info("do_mode_ctrl_overrides NTSC\n");
+ pr_info("do_mode_ctrl_overrides NTSC\n");
/* Move the close caption lines out of active video,
adjust the active video start point */
@@ -1004,7 +1004,7 @@ int cx231xx_do_mode_ctrl_overrides(struct cx231xx *dev)
(FLD_HBLANK_CNT, 0x79));
} else if (dev->norm & V4L2_STD_SECAM) {
- cx231xx_info("do_mode_ctrl_overrides SECAM\n");
+ pr_info("do_mode_ctrl_overrides SECAM\n");
status = cx231xx_read_modify_write_i2c_dword(dev,
VID_BLK_I2C_ADDRESS,
VERT_TIM_CTRL,
@@ -1031,7 +1031,7 @@ int cx231xx_do_mode_ctrl_overrides(struct cx231xx *dev)
cx231xx_set_field
(FLD_HBLANK_CNT, 0x85));
} else {
- cx231xx_info("do_mode_ctrl_overrides PAL\n");
+ pr_info("do_mode_ctrl_overrides PAL\n");
status = cx231xx_read_modify_write_i2c_dword(dev,
VID_BLK_I2C_ADDRESS,
VERT_TIM_CTRL,
@@ -1331,109 +1331,109 @@ void cx231xx_dump_HH_reg(struct cx231xx *dev)
for (i = 0x100; i < 0x140; i++) {
vid_blk_read_word(dev, i, &value);
- cx231xx_info("reg0x%x=0x%x\n", i, value);
+ pr_info("reg0x%x=0x%x\n", i, value);
i = i+3;
}
for (i = 0x300; i < 0x400; i++) {
vid_blk_read_word(dev, i, &value);
- cx231xx_info("reg0x%x=0x%x\n", i, value);
+ pr_info("reg0x%x=0x%x\n", i, value);
i = i+3;
}
for (i = 0x400; i < 0x440; i++) {
vid_blk_read_word(dev, i, &value);
- cx231xx_info("reg0x%x=0x%x\n", i, value);
+ pr_info("reg0x%x=0x%x\n", i, value);
i = i+3;
}
vid_blk_read_word(dev, AFE_CTRL_C2HH_SRC_CTRL, &value);
- cx231xx_info("AFE_CTRL_C2HH_SRC_CTRL=0x%x\n", value);
+ pr_info("AFE_CTRL_C2HH_SRC_CTRL=0x%x\n", value);
vid_blk_write_word(dev, AFE_CTRL_C2HH_SRC_CTRL, 0x4485D390);
vid_blk_read_word(dev, AFE_CTRL_C2HH_SRC_CTRL, &value);
- cx231xx_info("AFE_CTRL_C2HH_SRC_CTRL=0x%x\n", value);
+ pr_info("AFE_CTRL_C2HH_SRC_CTRL=0x%x\n", value);
}
void cx231xx_dump_SC_reg(struct cx231xx *dev)
{
u8 value[4] = { 0, 0, 0, 0 };
- cx231xx_info("cx231xx_dump_SC_reg!\n");
+ pr_info("cx231xx_dump_SC_reg!\n");
cx231xx_read_ctrl_reg(dev, VRT_GET_REGISTER, BOARD_CFG_STAT,
value, 4);
- cx231xx_info("reg0x%x=0x%x 0x%x 0x%x 0x%x\n", BOARD_CFG_STAT, value[0],
+ pr_info("reg0x%x=0x%x 0x%x 0x%x 0x%x\n", BOARD_CFG_STAT, value[0],
value[1], value[2], value[3]);
cx231xx_read_ctrl_reg(dev, VRT_GET_REGISTER, TS_MODE_REG,
value, 4);
- cx231xx_info("reg0x%x=0x%x 0x%x 0x%x 0x%x\n", TS_MODE_REG, value[0],
+ pr_info("reg0x%x=0x%x 0x%x 0x%x 0x%x\n", TS_MODE_REG, value[0],
value[1], value[2], value[3]);
cx231xx_read_ctrl_reg(dev, VRT_GET_REGISTER, TS1_CFG_REG,
value, 4);
- cx231xx_info("reg0x%x=0x%x 0x%x 0x%x 0x%x\n", TS1_CFG_REG, value[0],
+ pr_info("reg0x%x=0x%x 0x%x 0x%x 0x%x\n", TS1_CFG_REG, value[0],
value[1], value[2], value[3]);
cx231xx_read_ctrl_reg(dev, VRT_GET_REGISTER, TS1_LENGTH_REG,
value, 4);
- cx231xx_info("reg0x%x=0x%x 0x%x 0x%x 0x%x\n", TS1_LENGTH_REG, value[0],
+ pr_info("reg0x%x=0x%x 0x%x 0x%x 0x%x\n", TS1_LENGTH_REG, value[0],
value[1], value[2], value[3]);
cx231xx_read_ctrl_reg(dev, VRT_GET_REGISTER, TS2_CFG_REG,
value, 4);
- cx231xx_info("reg0x%x=0x%x 0x%x 0x%x 0x%x\n", TS2_CFG_REG, value[0],
+ pr_info("reg0x%x=0x%x 0x%x 0x%x 0x%x\n", TS2_CFG_REG, value[0],
value[1], value[2], value[3]);
cx231xx_read_ctrl_reg(dev, VRT_GET_REGISTER, TS2_LENGTH_REG,
value, 4);
- cx231xx_info("reg0x%x=0x%x 0x%x 0x%x 0x%x\n", TS2_LENGTH_REG, value[0],
+ pr_info("reg0x%x=0x%x 0x%x 0x%x 0x%x\n", TS2_LENGTH_REG, value[0],
value[1], value[2], value[3]);
cx231xx_read_ctrl_reg(dev, VRT_GET_REGISTER, EP_MODE_SET,
value, 4);
- cx231xx_info("reg0x%x=0x%x 0x%x 0x%x 0x%x\n", EP_MODE_SET, value[0],
+ pr_info("reg0x%x=0x%x 0x%x 0x%x 0x%x\n", EP_MODE_SET, value[0],
value[1], value[2], value[3]);
cx231xx_read_ctrl_reg(dev, VRT_GET_REGISTER, CIR_PWR_PTN1,
value, 4);
- cx231xx_info("reg0x%x=0x%x 0x%x 0x%x 0x%x\n", CIR_PWR_PTN1, value[0],
+ pr_info("reg0x%x=0x%x 0x%x 0x%x 0x%x\n", CIR_PWR_PTN1, value[0],
value[1], value[2], value[3]);
cx231xx_read_ctrl_reg(dev, VRT_GET_REGISTER, CIR_PWR_PTN2,
value, 4);
- cx231xx_info("reg0x%x=0x%x 0x%x 0x%x 0x%x\n", CIR_PWR_PTN2, value[0],
+ pr_info("reg0x%x=0x%x 0x%x 0x%x 0x%x\n", CIR_PWR_PTN2, value[0],
value[1], value[2], value[3]);
cx231xx_read_ctrl_reg(dev, VRT_GET_REGISTER, CIR_PWR_PTN3,
value, 4);
- cx231xx_info("reg0x%x=0x%x 0x%x 0x%x 0x%x\n", CIR_PWR_PTN3, value[0],
+ pr_info("reg0x%x=0x%x 0x%x 0x%x 0x%x\n", CIR_PWR_PTN3, value[0],
value[1], value[2], value[3]);
cx231xx_read_ctrl_reg(dev, VRT_GET_REGISTER, CIR_PWR_MASK0,
value, 4);
- cx231xx_info("reg0x%x=0x%x 0x%x 0x%x 0x%x\n", CIR_PWR_MASK0, value[0],
+ pr_info("reg0x%x=0x%x 0x%x 0x%x 0x%x\n", CIR_PWR_MASK0, value[0],
value[1], value[2], value[3]);
cx231xx_read_ctrl_reg(dev, VRT_GET_REGISTER, CIR_PWR_MASK1,
value, 4);
- cx231xx_info("reg0x%x=0x%x 0x%x 0x%x 0x%x\n", CIR_PWR_MASK1, value[0],
+ pr_info("reg0x%x=0x%x 0x%x 0x%x 0x%x\n", CIR_PWR_MASK1, value[0],
value[1], value[2], value[3]);
cx231xx_read_ctrl_reg(dev, VRT_GET_REGISTER, CIR_PWR_MASK2,
value, 4);
- cx231xx_info("reg0x%x=0x%x 0x%x 0x%x 0x%x\n", CIR_PWR_MASK2, value[0],
+ pr_info("reg0x%x=0x%x 0x%x 0x%x 0x%x\n", CIR_PWR_MASK2, value[0],
value[1], value[2], value[3]);
cx231xx_read_ctrl_reg(dev, VRT_GET_REGISTER, CIR_GAIN,
value, 4);
- cx231xx_info("reg0x%x=0x%x 0x%x 0x%x 0x%x\n", CIR_GAIN, value[0],
+ pr_info("reg0x%x=0x%x 0x%x 0x%x 0x%x\n", CIR_GAIN, value[0],
value[1], value[2], value[3]);
cx231xx_read_ctrl_reg(dev, VRT_GET_REGISTER, CIR_CAR_REG,
value, 4);
- cx231xx_info("reg0x%x=0x%x 0x%x 0x%x 0x%x\n", CIR_CAR_REG, value[0],
+ pr_info("reg0x%x=0x%x 0x%x 0x%x 0x%x\n", CIR_CAR_REG, value[0],
value[1], value[2], value[3]);
cx231xx_read_ctrl_reg(dev, VRT_GET_REGISTER, CIR_OT_CFG1,
value, 4);
- cx231xx_info("reg0x%x=0x%x 0x%x 0x%x 0x%x\n", CIR_OT_CFG1, value[0],
+ pr_info("reg0x%x=0x%x 0x%x 0x%x 0x%x\n", CIR_OT_CFG1, value[0],
value[1], value[2], value[3]);
cx231xx_read_ctrl_reg(dev, VRT_GET_REGISTER, CIR_OT_CFG2,
value, 4);
- cx231xx_info("reg0x%x=0x%x 0x%x 0x%x 0x%x\n", CIR_OT_CFG2, value[0],
+ pr_info("reg0x%x=0x%x 0x%x 0x%x 0x%x\n", CIR_OT_CFG2, value[0],
value[1], value[2], value[3]);
cx231xx_read_ctrl_reg(dev, VRT_GET_REGISTER, PWR_CTL_EN,
value, 4);
- cx231xx_info("reg0x%x=0x%x 0x%x 0x%x 0x%x\n", PWR_CTL_EN, value[0],
+ pr_info("reg0x%x=0x%x 0x%x 0x%x 0x%x\n", PWR_CTL_EN, value[0],
value[1], value[2], value[3]);
@@ -1503,7 +1503,7 @@ void cx231xx_set_Colibri_For_LowIF(struct cx231xx *dev, u32 if_freq,
u32 standard = 0;
u8 value[4] = { 0, 0, 0, 0 };
- cx231xx_info("Enter cx231xx_set_Colibri_For_LowIF()\n");
+ pr_info("Enter cx231xx_set_Colibri_For_LowIF()\n");
value[0] = (u8) 0x6F;
value[1] = (u8) 0x6F;
value[2] = (u8) 0x6F;
@@ -1523,7 +1523,7 @@ void cx231xx_set_Colibri_For_LowIF(struct cx231xx *dev, u32 if_freq,
colibri_carrier_offset = cx231xx_Get_Colibri_CarrierOffset(mode,
standard);
- cx231xx_info("colibri_carrier_offset=%d, standard=0x%x\n",
+ pr_info("colibri_carrier_offset=%d, standard=0x%x\n",
colibri_carrier_offset, standard);
/* Set the band Pass filter for DIF*/
@@ -1557,7 +1557,7 @@ void cx231xx_set_DIF_bandpass(struct cx231xx *dev, u32 if_freq,
u64 pll_freq_u64 = 0;
u32 i = 0;
- cx231xx_info("if_freq=%d;spectral_invert=0x%x;mode=0x%x\n",
+ pr_info("if_freq=%d;spectral_invert=0x%x;mode=0x%x\n",
if_freq, spectral_invert, mode);
@@ -1601,7 +1601,7 @@ void cx231xx_set_DIF_bandpass(struct cx231xx *dev, u32 if_freq,
if_freq = 16000000;
}
- cx231xx_info("Enter IF=%zu\n",
+ pr_info("Enter IF=%zu\n",
ARRAY_SIZE(Dif_set_array));
for (i = 0; i < ARRAY_SIZE(Dif_set_array); i++) {
if (Dif_set_array[i].if_freq == if_freq) {
@@ -1714,7 +1714,7 @@ int cx231xx_dif_set_standard(struct cx231xx *dev, u32 standard)
u32 dif_misc_ctrl_value = 0;
u32 func_mode = 0;
- cx231xx_info("%s: setStandard to %x\n", __func__, standard);
+ pr_info("%s: setStandard to %x\n", __func__, standard);
status = vid_blk_read_word(dev, DIF_MISC_CTRL, &dif_misc_ctrl_value);
if (standard != DIF_USE_BASEBAND)
@@ -2117,7 +2117,7 @@ int cx231xx_tuner_post_channel_change(struct cx231xx *dev)
{
int status = 0;
u32 dwval;
- cx231xx_info("cx231xx_tuner_post_channel_change dev->tuner_type =0%d\n",
+ pr_info("cx231xx_tuner_post_channel_change dev->tuner_type =0%d\n",
dev->tuner_type);
/* Set the RF and IF k_agc values to 4 for PAL/NTSC and 8 for
* SECAM L/B/D standards */
@@ -2219,7 +2219,7 @@ int cx231xx_set_power_mode(struct cx231xx *dev, enum AV_MODE mode)
if (dev->power_mode != mode)
dev->power_mode = mode;
else {
- cx231xx_info(" setPowerMode::mode = %d, No Change req.\n",
+ pr_info(" setPowerMode::mode = %d, No Change req.\n",
mode);
return 0;
}
@@ -2459,7 +2459,7 @@ int cx231xx_start_stream(struct cx231xx *dev, u32 ep_mask)
u32 tmp = 0;
int status = 0;
- cx231xx_info("cx231xx_start_stream():: ep_mask = %x\n", ep_mask);
+ pr_info("cx231xx_start_stream():: ep_mask = %x\n", ep_mask);
status = cx231xx_read_ctrl_reg(dev, VRT_GET_REGISTER, EP_MODE_SET,
value, 4);
if (status < 0)
@@ -2484,7 +2484,7 @@ int cx231xx_stop_stream(struct cx231xx *dev, u32 ep_mask)
u32 tmp = 0;
int status = 0;
- cx231xx_info("cx231xx_stop_stream():: ep_mask = %x\n", ep_mask);
+ pr_info("cx231xx_stop_stream():: ep_mask = %x\n", ep_mask);
status =
cx231xx_read_ctrl_reg(dev, VRT_GET_REGISTER, EP_MODE_SET, value, 4);
if (status < 0)
@@ -2512,32 +2512,32 @@ int cx231xx_initialize_stream_xfer(struct cx231xx *dev, u32 media_type)
if (dev->udev->speed == USB_SPEED_HIGH) {
switch (media_type) {
case Audio:
- cx231xx_info("%s: Audio enter HANC\n", __func__);
+ pr_info("%s: Audio enter HANC\n", __func__);
status =
cx231xx_mode_register(dev, TS_MODE_REG, 0x9300);
break;
case Vbi:
- cx231xx_info("%s: set vanc registers\n", __func__);
+ pr_info("%s: set vanc registers\n", __func__);
status = cx231xx_mode_register(dev, TS_MODE_REG, 0x300);
break;
case Sliced_cc:
- cx231xx_info("%s: set hanc registers\n", __func__);
+ pr_info("%s: set hanc registers\n", __func__);
status =
cx231xx_mode_register(dev, TS_MODE_REG, 0x1300);
break;
case Raw_Video:
- cx231xx_info("%s: set video registers\n", __func__);
+ pr_info("%s: set video registers\n", __func__);
status = cx231xx_mode_register(dev, TS_MODE_REG, 0x100);
break;
case TS1_serial_mode:
- cx231xx_info("%s: set ts1 registers", __func__);
+ pr_info("%s: set ts1 registers", __func__);
if (dev->board.has_417) {
- cx231xx_info(" MPEG\n");
+ pr_info(" MPEG\n");
value &= 0xFFFFFFFC;
value |= 0x3;
@@ -2558,14 +2558,14 @@ int cx231xx_initialize_stream_xfer(struct cx231xx *dev, u32 media_type)
TS1_LENGTH_REG, val, 4);
} else {
- cx231xx_info(" BDA\n");
+ pr_info(" BDA\n");
status = cx231xx_mode_register(dev, TS_MODE_REG, 0x101);
status = cx231xx_mode_register(dev, TS1_CFG_REG, 0x010);
}
break;
case TS1_parallel_mode:
- cx231xx_info("%s: set ts1 parallel mode registers\n",
+ pr_info("%s: set ts1 parallel mode registers\n",
__func__);
status = cx231xx_mode_register(dev, TS_MODE_REG, 0x100);
status = cx231xx_mode_register(dev, TS1_CFG_REG, 0x400);
@@ -2919,7 +2919,7 @@ int cx231xx_gpio_i2c_read_ack(struct cx231xx *dev)
(nCnt > 0));
if (nCnt == 0)
- cx231xx_info("No ACK after %d msec -GPIO I2C failed!",
+ pr_info("No ACK after %d msec -GPIO I2C failed!",
nInit * 10);
/*
diff --git a/drivers/media/usb/cx231xx/cx231xx-cards.c b/drivers/media/usb/cx231xx/cx231xx-cards.c
index 432cbcf8ce43..375fd85447f8 100644
--- a/drivers/media/usb/cx231xx/cx231xx-cards.c
+++ b/drivers/media/usb/cx231xx/cx231xx-cards.c
@@ -20,6 +20,7 @@
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
+#include "cx231xx.h"
#include <linux/init.h>
#include <linux/module.h>
#include <linux/slab.h>
@@ -35,7 +36,6 @@
#include "xc5000.h"
#include "tda18271.h"
-#include "cx231xx.h"
static int tuner = -1;
module_param(tuner, int, 0444);
@@ -673,7 +673,7 @@ struct cx231xx_board cx231xx_boards[] = {
.decoder = CX231XX_AVDECODER,
.output_mode = OUT_MODE_VIP11,
.ctl_pin_status_mask = 0xFFFFFFC4,
- .agc_analog_digital_select_gpio = 0x0c,
+ .agc_analog_digital_select_gpio = 0x0c,
/* According with PV CxPlrCAP.inf file */
.gpio_pin_status_mask = 0x4001000,
.norm = V4L2_STD_NTSC,
@@ -856,7 +856,7 @@ int cx231xx_tuner_callback(void *ptr, int component, int command, int arg)
if (dev->tuner_type == TUNER_XC5000) {
if (command == XC5000_TUNER_RESET) {
- cx231xx_info
+ pr_info
("Tuner CB: RESET: cmd %d : tuner type %d \n",
command, dev->tuner_type);
cx231xx_set_gpio_value(dev, dev->board.tuner_gpio->bit,
@@ -916,7 +916,7 @@ void cx231xx_pre_card_setup(struct cx231xx *dev)
cx231xx_set_model(dev);
- cx231xx_info("Identified as %s (card=%d)\n",
+ pr_info("Identified as %s (card=%d)\n",
dev->board.name, dev->model);
/* set the direction for GPIO pins */
@@ -990,7 +990,7 @@ static int read_eeprom(struct cx231xx *dev, struct i2c_client *client,
/* start reading at offset 0 */
ret = i2c_transfer(client->adapter, &msg_write, 1);
if (ret < 0) {
- cx231xx_err("Can't read eeprom\n");
+ pr_err("Can't read eeprom\n");
return ret;
}
@@ -1000,7 +1000,7 @@ static int read_eeprom(struct cx231xx *dev, struct i2c_client *client,
ret = i2c_transfer(client->adapter, &msg_read, 1);
if (ret < 0) {
- cx231xx_err("Can't read eeprom\n");
+ pr_err("Can't read eeprom\n");
return ret;
}
eedata_cur += msg_read.len;
@@ -1008,7 +1008,7 @@ static int read_eeprom(struct cx231xx *dev, struct i2c_client *client,
}
for (i = 0; i + 15 < len; i += 16)
- cx231xx_info("i2c eeprom %02x: %*ph\n", i, 16, &eedata[i]);
+ pr_info("i2c eeprom %02x: %*ph\n", i, 16, &eedata[i]);
return 0;
}
@@ -1028,7 +1028,7 @@ void cx231xx_card_setup(struct cx231xx *dev)
cx231xx_get_i2c_adap(dev, I2C_0),
"cx25840", 0x88 >> 1, NULL);
if (dev->sd_cx25840 == NULL)
- cx231xx_info("cx25840 subdev registration failure\n");
+ pr_info("cx25840 subdev registration failure\n");
cx25840_call(dev, core, load_fw);
}
@@ -1042,7 +1042,7 @@ void cx231xx_card_setup(struct cx231xx *dev)
"tuner",
dev->tuner_addr, NULL);
if (dev->sd_tuner == NULL)
- cx231xx_info("tuner subdev registration failure\n");
+ pr_info("tuner subdev registration failure\n");
else
cx231xx_config_tuner(dev);
}
@@ -1148,7 +1148,7 @@ static int cx231xx_init_dev(struct cx231xx *dev, struct usb_device *udev,
/* Query cx231xx to find what pcb config it is related to */
retval = initialize_cx231xx(dev);
if (retval < 0) {
- cx231xx_errdev("Failed to read PCB config\n");
+ pr_err("Failed to read PCB config\n");
return retval;
}
@@ -1164,7 +1164,7 @@ static int cx231xx_init_dev(struct cx231xx *dev, struct usb_device *udev,
retval = cx231xx_config(dev);
if (retval) {
- cx231xx_errdev("error configuring device\n");
+ pr_err("error configuring device\n");
return -ENOMEM;
}
@@ -1174,7 +1174,7 @@ static int cx231xx_init_dev(struct cx231xx *dev, struct usb_device *udev,
/* register i2c bus */
retval = cx231xx_dev_init(dev);
if (retval) {
- cx231xx_errdev("%s: cx231xx_i2c_register - errCode [%d]!\n",
+ pr_err("%s: cx231xx_i2c_register - errCode [%d]!\n",
__func__, retval);
goto err_dev_init;
}
@@ -1196,7 +1196,7 @@ static int cx231xx_init_dev(struct cx231xx *dev, struct usb_device *udev,
retval = cx231xx_config(dev);
if (retval) {
- cx231xx_errdev("%s: cx231xx_config - errCode [%d]!\n",
+ pr_err("%s: cx231xx_config - errCode [%d]!\n",
__func__, retval);
goto err_dev_init;
}
@@ -1281,7 +1281,7 @@ static int cx231xx_init_v4l2(struct cx231xx *dev,
/* compute alternate max packet sizes for video */
idx = dev->current_pcb_config.hs_config_info[0].interface_info.video_index + 1;
if (idx >= dev->max_iad_interface_count) {
- cx231xx_errdev("Video PCB interface #%d doesn't exist\n", idx);
+ pr_err("Video PCB interface #%d doesn't exist\n", idx);
return -ENODEV;
}
@@ -1290,20 +1290,20 @@ static int cx231xx_init_v4l2(struct cx231xx *dev,
dev->video_mode.end_point_addr = uif->altsetting[0].endpoint[isoc_pipe].desc.bEndpointAddress;
dev->video_mode.num_alt = uif->num_altsetting;
- cx231xx_info("EndPoint Addr 0x%x, Alternate settings: %i\n",
+ pr_info("EndPoint Addr 0x%x, Alternate settings: %i\n",
dev->video_mode.end_point_addr,
dev->video_mode.num_alt);
dev->video_mode.alt_max_pkt_size = devm_kmalloc_array(&udev->dev, 32, dev->video_mode.num_alt, GFP_KERNEL);
if (dev->video_mode.alt_max_pkt_size == NULL) {
- cx231xx_errdev("out of memory!\n");
+ pr_err("out of memory!\n");
return -ENOMEM;
}
for (i = 0; i < dev->video_mode.num_alt; i++) {
u16 tmp = le16_to_cpu(uif->altsetting[i].endpoint[isoc_pipe].desc.wMaxPacketSize);
dev->video_mode.alt_max_pkt_size[i] = (tmp & 0x07ff) * (((tmp & 0x1800) >> 11) + 1);
- cx231xx_info("Alternate setting %i, max size= %i\n", i,
+ pr_info("Alternate setting %i, max size= %i\n", i,
dev->video_mode.alt_max_pkt_size[i]);
}
@@ -1311,7 +1311,7 @@ static int cx231xx_init_v4l2(struct cx231xx *dev,
idx = dev->current_pcb_config.hs_config_info[0].interface_info.vanc_index + 1;
if (idx >= dev->max_iad_interface_count) {
- cx231xx_errdev("VBI PCB interface #%d doesn't exist\n", idx);
+ pr_err("VBI PCB interface #%d doesn't exist\n", idx);
return -ENODEV;
}
uif = udev->actconfig->interface[idx];
@@ -1321,14 +1321,14 @@ static int cx231xx_init_v4l2(struct cx231xx *dev,
bEndpointAddress;
dev->vbi_mode.num_alt = uif->num_altsetting;
- cx231xx_info("EndPoint Addr 0x%x, Alternate settings: %i\n",
+ pr_info("EndPoint Addr 0x%x, Alternate settings: %i\n",
dev->vbi_mode.end_point_addr,
dev->vbi_mode.num_alt);
/* compute alternate max packet sizes for vbi */
dev->vbi_mode.alt_max_pkt_size = devm_kmalloc_array(&udev->dev, 32, dev->vbi_mode.num_alt, GFP_KERNEL);
if (dev->vbi_mode.alt_max_pkt_size == NULL) {
- cx231xx_errdev("out of memory!\n");
+ pr_err("out of memory!\n");
return -ENOMEM;
}
@@ -1338,7 +1338,7 @@ static int cx231xx_init_v4l2(struct cx231xx *dev,
desc.wMaxPacketSize);
dev->vbi_mode.alt_max_pkt_size[i] =
(tmp & 0x07ff) * (((tmp & 0x1800) >> 11) + 1);
- cx231xx_info("Alternate setting %i, max size= %i\n", i,
+ pr_info("Alternate setting %i, max size= %i\n", i,
dev->vbi_mode.alt_max_pkt_size[i]);
}
@@ -1347,7 +1347,7 @@ static int cx231xx_init_v4l2(struct cx231xx *dev,
/* compute alternate max packet sizes for sliced CC */
idx = dev->current_pcb_config.hs_config_info[0].interface_info.hanc_index + 1;
if (idx >= dev->max_iad_interface_count) {
- cx231xx_errdev("Sliced CC PCB interface #%d doesn't exist\n", idx);
+ pr_err("Sliced CC PCB interface #%d doesn't exist\n", idx);
return -ENODEV;
}
uif = udev->actconfig->interface[idx];
@@ -1357,13 +1357,13 @@ static int cx231xx_init_v4l2(struct cx231xx *dev,
bEndpointAddress;
dev->sliced_cc_mode.num_alt = uif->num_altsetting;
- cx231xx_info("EndPoint Addr 0x%x, Alternate settings: %i\n",
+ pr_info("EndPoint Addr 0x%x, Alternate settings: %i\n",
dev->sliced_cc_mode.end_point_addr,
dev->sliced_cc_mode.num_alt);
dev->sliced_cc_mode.alt_max_pkt_size = devm_kmalloc_array(&udev->dev, 32, dev->sliced_cc_mode.num_alt, GFP_KERNEL);
if (dev->sliced_cc_mode.alt_max_pkt_size == NULL) {
- cx231xx_errdev("out of memory!\n");
+ pr_err("out of memory!\n");
return -ENOMEM;
}
@@ -1372,7 +1372,7 @@ static int cx231xx_init_v4l2(struct cx231xx *dev,
desc.wMaxPacketSize);
dev->sliced_cc_mode.alt_max_pkt_size[i] =
(tmp & 0x07ff) * (((tmp & 0x1800) >> 11) + 1);
- cx231xx_info("Alternate setting %i, max size= %i\n", i,
+ pr_info("Alternate setting %i, max size= %i\n", i,
dev->sliced_cc_mode.alt_max_pkt_size[i]);
}
@@ -1410,7 +1410,7 @@ static int cx231xx_usb_probe(struct usb_interface *interface,
nr = find_first_zero_bit(&cx231xx_devused, CX231XX_MAXBOARDS);
if (nr >= CX231XX_MAXBOARDS) {
/* No free device slots */
- cx231xx_err(DRIVER_NAME ": Supports only %i devices.\n",
+ pr_err(DRIVER_NAME ": Supports only %i devices.\n",
CX231XX_MAXBOARDS);
return -ENOMEM;
}
@@ -1421,7 +1421,7 @@ static int cx231xx_usb_probe(struct usb_interface *interface,
/* allocate memory for our device state and initialize it */
dev = devm_kzalloc(&udev->dev, sizeof(*dev), GFP_KERNEL);
if (dev == NULL) {
- cx231xx_err(DRIVER_NAME ": out of memory!\n");
+ pr_err(DRIVER_NAME ": out of memory!\n");
clear_bit(nr, &cx231xx_devused);
return -ENOMEM;
}
@@ -1468,7 +1468,7 @@ static int cx231xx_usb_probe(struct usb_interface *interface,
speed = "unknown";
}
- cx231xx_info("New device %s %s @ %s Mbps "
+ pr_info("New device %s %s @ %s Mbps "
"(%04x:%04x) with %d interfaces\n",
udev->manufacturer ? udev->manufacturer : "",
udev->product ? udev->product : "",
@@ -1485,13 +1485,13 @@ static int cx231xx_usb_probe(struct usb_interface *interface,
assoc_desc = udev->actconfig->intf_assoc[0];
if (assoc_desc->bFirstInterface != ifnum) {
- cx231xx_err(DRIVER_NAME ": Not found "
+ pr_err(DRIVER_NAME ": Not found "
"matching IAD interface\n");
retval = -ENODEV;
goto err_if;
}
- cx231xx_info("registering interface %d\n", ifnum);
+ pr_info("registering interface %d\n", ifnum);
/* save our data pointer in this interface device */
usb_set_intfdata(interface, dev);
@@ -1499,7 +1499,7 @@ static int cx231xx_usb_probe(struct usb_interface *interface,
/* Create v4l2 device */
retval = v4l2_device_register(&interface->dev, &dev->v4l2_dev);
if (retval) {
- cx231xx_errdev("v4l2_device_register failed\n");
+ pr_err("v4l2_device_register failed\n");
goto err_v4l2;
}
@@ -1516,7 +1516,7 @@ static int cx231xx_usb_probe(struct usb_interface *interface,
/* compute alternate max packet sizes for TS1 */
idx = dev->current_pcb_config.hs_config_info[0].interface_info.ts1_index + 1;
if (idx >= dev->max_iad_interface_count) {
- cx231xx_errdev("TS1 PCB interface #%d doesn't exist\n", idx);
+ pr_err("TS1 PCB interface #%d doesn't exist\n", idx);
retval = -ENODEV;
goto err_video_alt;
}
@@ -1527,13 +1527,13 @@ static int cx231xx_usb_probe(struct usb_interface *interface,
desc.bEndpointAddress;
dev->ts1_mode.num_alt = uif->num_altsetting;
- cx231xx_info("EndPoint Addr 0x%x, Alternate settings: %i\n",
+ pr_info("EndPoint Addr 0x%x, Alternate settings: %i\n",
dev->ts1_mode.end_point_addr,
dev->ts1_mode.num_alt);
dev->ts1_mode.alt_max_pkt_size = devm_kmalloc_array(&udev->dev, 32, dev->ts1_mode.num_alt, GFP_KERNEL);
if (dev->ts1_mode.alt_max_pkt_size == NULL) {
- cx231xx_errdev("out of memory!\n");
+ pr_err("out of memory!\n");
retval = -ENOMEM;
goto err_video_alt;
}
@@ -1544,7 +1544,7 @@ static int cx231xx_usb_probe(struct usb_interface *interface,
wMaxPacketSize);
dev->ts1_mode.alt_max_pkt_size[i] =
(tmp & 0x07ff) * (((tmp & 0x1800) >> 11) + 1);
- cx231xx_info("Alternate setting %i, max size= %i\n", i,
+ pr_info("Alternate setting %i, max size= %i\n", i,
dev->ts1_mode.alt_max_pkt_size[i]);
}
}
@@ -1609,7 +1609,7 @@ static void cx231xx_usb_disconnect(struct usb_interface *interface)
wake_up_interruptible_all(&dev->open);
if (dev->users) {
- cx231xx_warn
+ pr_warn
("device %s is open! Deregistration and memory "
"deallocation are deferred on close.\n",
video_device_node_name(dev->vdev));
diff --git a/drivers/media/usb/cx231xx/cx231xx-core.c b/drivers/media/usb/cx231xx/cx231xx-core.c
index 9b5cd9e9b169..229e855fc7f2 100644
--- a/drivers/media/usb/cx231xx/cx231xx-core.c
+++ b/drivers/media/usb/cx231xx/cx231xx-core.c
@@ -20,6 +20,7 @@
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
+#include "cx231xx.h"
#include <linux/init.h>
#include <linux/list.h>
#include <linux/module.h>
@@ -29,7 +30,6 @@
#include <media/v4l2-common.h>
#include <media/tuner.h>
-#include "cx231xx.h"
#include "cx231xx-reg.h"
/* #define ENABLE_DEBUG_ISOC_FRAMES */
@@ -228,7 +228,7 @@ int cx231xx_send_usb_command(struct cx231xx_i2c *i2c_bus,
/* call common vendor command request */
status = cx231xx_send_vendor_cmd(dev, &ven_req);
if (status < 0) {
- cx231xx_info
+ pr_info
("UsbInterface::sendCommand, failed with status -%d\n",
status);
}
@@ -524,7 +524,7 @@ int cx231xx_set_video_alternate(struct cx231xx *dev)
usb_set_interface(dev->udev, usb_interface_index,
dev->video_mode.alt);
if (errCode < 0) {
- cx231xx_errdev
+ pr_err
("cannot change alt number to %d (error=%i)\n",
dev->video_mode.alt, errCode);
return errCode;
@@ -600,7 +600,7 @@ int cx231xx_set_alt_setting(struct cx231xx *dev, u8 index, u8 alt)
}
if (alt > 0 && max_pkt_size == 0) {
- cx231xx_errdev
+ pr_err
("can't change interface %d alt no. to %d: Max. Pkt size = 0\n",
usb_interface_index, alt);
/*To workaround error number=-71 on EP0 for videograbber,
@@ -616,7 +616,7 @@ int cx231xx_set_alt_setting(struct cx231xx *dev, u8 index, u8 alt)
if (usb_interface_index > 0) {
status = usb_set_interface(dev->udev, usb_interface_index, alt);
if (status < 0) {
- cx231xx_errdev
+ pr_err
("can't change interface %d alt no. to %d (err=%i)\n",
usb_interface_index, alt, status);
return status;
@@ -768,7 +768,7 @@ int cx231xx_ep5_bulkout(struct cx231xx *dev, u8 *firmware, u16 size)
buffer = kzalloc(4096, GFP_KERNEL);
if (buffer == NULL) {
- cx231xx_info("out of mem\n");
+ pr_info("out of mem\n");
return -ENOMEM;
}
memcpy(&buffer[0], firmware, 4096);
@@ -777,7 +777,7 @@ int cx231xx_ep5_bulkout(struct cx231xx *dev, u8 *firmware, u16 size)
buffer, 4096, &actlen, 2000);
if (ret)
- cx231xx_info("bulk message failed: %d (%d/%d)", ret,
+ pr_info("bulk message failed: %d (%d/%d)", ret,
size, actlen);
else {
errCode = actlen != size ? -1 : 0;
@@ -988,7 +988,7 @@ int cx231xx_init_isoc(struct cx231xx *dev, int max_packets,
dma_q->p_left_data = kzalloc(4096, GFP_KERNEL);
if (dma_q->p_left_data == NULL) {
- cx231xx_info("out of mem\n");
+ pr_info("out of mem\n");
return -ENOMEM;
}
@@ -1018,14 +1018,14 @@ int cx231xx_init_isoc(struct cx231xx *dev, int max_packets,
dev->video_mode.isoc_ctl.urb =
kzalloc(sizeof(void *) * num_bufs, GFP_KERNEL);
if (!dev->video_mode.isoc_ctl.urb) {
- cx231xx_errdev("cannot alloc memory for usb buffers\n");
+ pr_err("cannot alloc memory for usb buffers\n");
return -ENOMEM;
}
dev->video_mode.isoc_ctl.transfer_buffer =
kzalloc(sizeof(void *) * num_bufs, GFP_KERNEL);
if (!dev->video_mode.isoc_ctl.transfer_buffer) {
- cx231xx_errdev("cannot allocate memory for usbtransfer\n");
+ pr_err("cannot allocate memory for usbtransfer\n");
kfree(dev->video_mode.isoc_ctl.urb);
return -ENOMEM;
}
@@ -1045,7 +1045,7 @@ int cx231xx_init_isoc(struct cx231xx *dev, int max_packets,
for (i = 0; i < dev->video_mode.isoc_ctl.num_bufs; i++) {
urb = usb_alloc_urb(max_packets, GFP_KERNEL);
if (!urb) {
- cx231xx_err("cannot alloc isoc_ctl.urb %i\n", i);
+ pr_err("cannot alloc isoc_ctl.urb %i\n", i);
cx231xx_uninit_isoc(dev);
return -ENOMEM;
}
@@ -1055,7 +1055,7 @@ int cx231xx_init_isoc(struct cx231xx *dev, int max_packets,
usb_alloc_coherent(dev->udev, sb_size, GFP_KERNEL,
&urb->transfer_dma);
if (!dev->video_mode.isoc_ctl.transfer_buffer[i]) {
- cx231xx_err("unable to allocate %i bytes for transfer"
+ pr_err("unable to allocate %i bytes for transfer"
" buffer %i%s\n",
sb_size, i,
in_interrupt() ? " while in int" : "");
@@ -1090,7 +1090,7 @@ int cx231xx_init_isoc(struct cx231xx *dev, int max_packets,
rc = usb_submit_urb(dev->video_mode.isoc_ctl.urb[i],
GFP_ATOMIC);
if (rc) {
- cx231xx_err("submit of urb %i failed (error=%i)\n", i,
+ pr_err("submit of urb %i failed (error=%i)\n", i,
rc);
cx231xx_uninit_isoc(dev);
return rc;
@@ -1151,14 +1151,14 @@ int cx231xx_init_bulk(struct cx231xx *dev, int max_packets,
dev->video_mode.bulk_ctl.urb =
kzalloc(sizeof(void *) * num_bufs, GFP_KERNEL);
if (!dev->video_mode.bulk_ctl.urb) {
- cx231xx_errdev("cannot alloc memory for usb buffers\n");
+ pr_err("cannot alloc memory for usb buffers\n");
return -ENOMEM;
}
dev->video_mode.bulk_ctl.transfer_buffer =
kzalloc(sizeof(void *) * num_bufs, GFP_KERNEL);
if (!dev->video_mode.bulk_ctl.transfer_buffer) {
- cx231xx_errdev("cannot allocate memory for usbtransfer\n");
+ pr_err("cannot allocate memory for usbtransfer\n");
kfree(dev->video_mode.bulk_ctl.urb);
return -ENOMEM;
}
@@ -1178,7 +1178,7 @@ int cx231xx_init_bulk(struct cx231xx *dev, int max_packets,
for (i = 0; i < dev->video_mode.bulk_ctl.num_bufs; i++) {
urb = usb_alloc_urb(0, GFP_KERNEL);
if (!urb) {
- cx231xx_err("cannot alloc bulk_ctl.urb %i\n", i);
+ pr_err("cannot alloc bulk_ctl.urb %i\n", i);
cx231xx_uninit_bulk(dev);
return -ENOMEM;
}
@@ -1189,7 +1189,7 @@ int cx231xx_init_bulk(struct cx231xx *dev, int max_packets,
usb_alloc_coherent(dev->udev, sb_size, GFP_KERNEL,
&urb->transfer_dma);
if (!dev->video_mode.bulk_ctl.transfer_buffer[i]) {
- cx231xx_err("unable to allocate %i bytes for transfer"
+ pr_err("unable to allocate %i bytes for transfer"
" buffer %i%s\n",
sb_size, i,
in_interrupt() ? " while in int" : "");
@@ -1212,7 +1212,7 @@ int cx231xx_init_bulk(struct cx231xx *dev, int max_packets,
rc = usb_submit_urb(dev->video_mode.bulk_ctl.urb[i],
GFP_ATOMIC);
if (rc) {
- cx231xx_err("submit of urb %i failed (error=%i)\n", i,
+ pr_err("submit of urb %i failed (error=%i)\n", i,
rc);
cx231xx_uninit_bulk(dev);
return rc;
@@ -1316,7 +1316,7 @@ int cx231xx_dev_init(struct cx231xx *dev)
errCode = cx231xx_set_power_mode(dev,
POLARIS_AVMODE_ENXTERNAL_AV);
if (errCode < 0) {
- cx231xx_errdev
+ pr_err
("%s: Failed to set Power - errCode [%d]!\n",
__func__, errCode);
return errCode;
@@ -1325,7 +1325,7 @@ int cx231xx_dev_init(struct cx231xx *dev)
errCode = cx231xx_set_power_mode(dev,
POLARIS_AVMODE_ANALOGT_TV);
if (errCode < 0) {
- cx231xx_errdev
+ pr_err
("%s: Failed to set Power - errCode [%d]!\n",
__func__, errCode);
return errCode;
@@ -1340,14 +1340,14 @@ int cx231xx_dev_init(struct cx231xx *dev)
/* initialize Colibri block */
errCode = cx231xx_afe_init_super_block(dev, 0x23c);
if (errCode < 0) {
- cx231xx_errdev
+ pr_err
("%s: cx231xx_afe init super block - errCode [%d]!\n",
__func__, errCode);
return errCode;
}
errCode = cx231xx_afe_init_channels(dev);
if (errCode < 0) {
- cx231xx_errdev
+ pr_err
("%s: cx231xx_afe init channels - errCode [%d]!\n",
__func__, errCode);
return errCode;
@@ -1356,7 +1356,7 @@ int cx231xx_dev_init(struct cx231xx *dev)
/* Set DIF in By pass mode */
errCode = cx231xx_dif_set_standard(dev, DIF_USE_BASEBAND);
if (errCode < 0) {
- cx231xx_errdev
+ pr_err
("%s: cx231xx_dif set to By pass mode - errCode [%d]!\n",
__func__, errCode);
return errCode;
@@ -1365,7 +1365,7 @@ int cx231xx_dev_init(struct cx231xx *dev)
/* I2S block related functions */
errCode = cx231xx_i2s_blk_initialize(dev);
if (errCode < 0) {
- cx231xx_errdev
+ pr_err
("%s: cx231xx_i2s block initialize - errCode [%d]!\n",
__func__, errCode);
return errCode;
@@ -1374,7 +1374,7 @@ int cx231xx_dev_init(struct cx231xx *dev)
/* init control pins */
errCode = cx231xx_init_ctrl_pin_status(dev);
if (errCode < 0) {
- cx231xx_errdev("%s: cx231xx_init ctrl pins - errCode [%d]!\n",
+ pr_err("%s: cx231xx_init ctrl pins - errCode [%d]!\n",
__func__, errCode);
return errCode;
}
@@ -1400,7 +1400,7 @@ int cx231xx_dev_init(struct cx231xx *dev)
break;
}
if (errCode < 0) {
- cx231xx_errdev
+ pr_err
("%s: cx231xx_AGC mode to Analog - errCode [%d]!\n",
__func__, errCode);
return errCode;
@@ -1477,7 +1477,7 @@ int cx231xx_send_gpio_cmd(struct cx231xx *dev, u32 gpio_bit, u8 *gpio_val,
/* call common vendor command request */
status = cx231xx_send_vendor_cmd(dev, &ven_req);
if (status < 0) {
- cx231xx_info
+ pr_info
("UsbInterface::sendCommand, failed with status -%d\n",
status);
}
diff --git a/drivers/media/usb/cx231xx/cx231xx-dvb.c b/drivers/media/usb/cx231xx/cx231xx-dvb.c
index 2ea69469e74b..a743865b40c0 100644
--- a/drivers/media/usb/cx231xx/cx231xx-dvb.c
+++ b/drivers/media/usb/cx231xx/cx231xx-dvb.c
@@ -19,11 +19,11 @@
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
+#include "cx231xx.h"
#include <linux/kernel.h>
#include <linux/slab.h>
#include <linux/usb.h>
-#include "cx231xx.h"
#include <media/v4l2-common.h>
#include <media/videobuf-vmalloc.h>
@@ -265,7 +265,7 @@ static int start_streaming(struct cx231xx_dvb *dvb)
struct cx231xx *dev = dvb->adapter.priv;
if (dev->USE_ISO) {
- cx231xx_info("DVB transfer mode is ISO.\n");
+ pr_info("DVB transfer mode is ISO.\n");
cx231xx_set_alt_setting(dev, INDEX_TS1, 4);
rc = cx231xx_set_mode(dev, CX231XX_DIGITAL_MODE);
if (rc < 0)
@@ -276,7 +276,7 @@ static int start_streaming(struct cx231xx_dvb *dvb)
dev->ts1_mode.max_pkt_size,
dvb_isoc_copy);
} else {
- cx231xx_info("DVB transfer mode is BULK.\n");
+ pr_info("DVB transfer mode is BULK.\n");
cx231xx_set_alt_setting(dev, INDEX_TS1, 0);
rc = cx231xx_set_mode(dev, CX231XX_DIGITAL_MODE);
if (rc < 0)
@@ -430,15 +430,15 @@ int cx231xx_reset_analog_tuner(struct cx231xx *dev)
if (dops->init != NULL && !dev->xc_fw_load_done) {
- cx231xx_info("Reloading firmware for XC5000\n");
+ pr_info("Reloading firmware for XC5000\n");
status = dops->init(dev->dvb->frontend);
if (status == 0) {
dev->xc_fw_load_done = 1;
- cx231xx_info
+ pr_info
("XC5000 firmware download completed\n");
} else {
dev->xc_fw_load_done = 0;
- cx231xx_info
+ pr_info
("XC5000 firmware download failed !!!\n");
}
}
diff --git a/drivers/media/usb/cx231xx/cx231xx-i2c.c b/drivers/media/usb/cx231xx/cx231xx-i2c.c
index d1003c703fb5..d4a468a60bd0 100644
--- a/drivers/media/usb/cx231xx/cx231xx-i2c.c
+++ b/drivers/media/usb/cx231xx/cx231xx-i2c.c
@@ -20,6 +20,7 @@
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
+#include "cx231xx.h"
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/usb.h>
@@ -28,7 +29,6 @@
#include <media/v4l2-common.h>
#include <media/tuner.h>
-#include "cx231xx.h"
/* ----------------------------------------------------------- */
@@ -498,17 +498,17 @@ void cx231xx_do_i2c_scan(struct cx231xx *dev, int i2c_port)
memset(&client, 0, sizeof(client));
client.adapter = cx231xx_get_i2c_adap(dev, i2c_port);
- cx231xx_info(": Checking for I2C devices on port=%d ..\n", i2c_port);
+ pr_info(": Checking for I2C devices on port=%d ..\n", i2c_port);
for (i = 0; i < 128; i++) {
client.addr = i;
rc = i2c_master_recv(&client, &buf, 0);
if (rc < 0)
continue;
- cx231xx_info("%s: i2c scan: found device @ 0x%x [%s]\n",
+ pr_info("%s: i2c scan: found device @ 0x%x [%s]\n",
dev->name, i << 1,
i2c_devs[i] ? i2c_devs[i] : "???");
}
- cx231xx_info(": Completed Checking for I2C devices on port=%d.\n",
+ pr_info(": Completed Checking for I2C devices on port=%d.\n",
i2c_port);
}
@@ -532,7 +532,7 @@ int cx231xx_i2c_register(struct cx231xx_i2c *bus)
i2c_add_adapter(&bus->i2c_adap);
if (0 != bus->i2c_rc)
- cx231xx_warn("%s: i2c bus %d register FAILED\n",
+ pr_warn("%s: i2c bus %d register FAILED\n",
dev->name, bus->nr);
return bus->i2c_rc;
@@ -576,7 +576,7 @@ int cx231xx_i2c_mux_register(struct cx231xx *dev, int mux_no)
NULL);
if (!dev->i2c_mux_adap[mux_no])
- cx231xx_warn("%s: i2c mux %d register FAILED\n",
+ pr_warn("%s: i2c mux %d register FAILED\n",
dev->name, mux_no);
return 0;
diff --git a/drivers/media/usb/cx231xx/cx231xx-pcb-cfg.c b/drivers/media/usb/cx231xx/cx231xx-pcb-cfg.c
index 3052c4c20229..4666e533fe0a 100644
--- a/drivers/media/usb/cx231xx/cx231xx-pcb-cfg.c
+++ b/drivers/media/usb/cx231xx/cx231xx-pcb-cfg.c
@@ -703,8 +703,8 @@ int initialize_cx231xx(struct cx231xx *dev)
_current_scenario_idx = INDEX_BUSPOWER_DIF_ONLY;
break;
default:
- cx231xx_info("bad config in buspower!!!!\n");
- cx231xx_info("config_info=%x\n",
+ pr_info("bad config in buspower!!!!\n");
+ pr_info("config_info=%x\n",
(config_info & BUSPOWER_MASK));
return 1;
}
@@ -768,8 +768,8 @@ int initialize_cx231xx(struct cx231xx *dev)
_current_scenario_idx = INDEX_SELFPOWER_COMPRESSOR;
break;
default:
- cx231xx_info("bad senario!!!!!\n");
- cx231xx_info("config_info=%x\n",
+ pr_info("bad senario!!!!!\n");
+ pr_info("config_info=%x\n",
(config_info & SELFPOWER_MASK));
return -ENODEV;
}
@@ -781,17 +781,17 @@ int initialize_cx231xx(struct cx231xx *dev)
sizeof(struct pcb_config));
if (pcb_debug) {
- cx231xx_info("SC(0x00) register = 0x%x\n", config_info);
- cx231xx_info("scenario %d\n",
+ pr_info("SC(0x00) register = 0x%x\n", config_info);
+ pr_info("scenario %d\n",
(dev->current_pcb_config.index) + 1);
- cx231xx_info("type=%x\n", dev->current_pcb_config.type);
- cx231xx_info("mode=%x\n", dev->current_pcb_config.mode);
- cx231xx_info("speed=%x\n", dev->current_pcb_config.speed);
- cx231xx_info("ts1_source=%x\n",
+ pr_info("type=%x\n", dev->current_pcb_config.type);
+ pr_info("mode=%x\n", dev->current_pcb_config.mode);
+ pr_info("speed=%x\n", dev->current_pcb_config.speed);
+ pr_info("ts1_source=%x\n",
dev->current_pcb_config.ts1_source);
- cx231xx_info("ts2_source=%x\n",
+ pr_info("ts2_source=%x\n",
dev->current_pcb_config.ts2_source);
- cx231xx_info("analog_source=%x\n",
+ pr_info("analog_source=%x\n",
dev->current_pcb_config.analog_source);
}
diff --git a/drivers/media/usb/cx231xx/cx231xx-vbi.c b/drivers/media/usb/cx231xx/cx231xx-vbi.c
index c02794274f51..f80126d3525a 100644
--- a/drivers/media/usb/cx231xx/cx231xx-vbi.c
+++ b/drivers/media/usb/cx231xx/cx231xx-vbi.c
@@ -19,6 +19,7 @@
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
+#include "cx231xx.h"
#include <linux/init.h>
#include <linux/list.h>
#include <linux/module.h>
@@ -35,7 +36,6 @@
#include <media/msp3400.h>
#include <media/tuner.h>
-#include "cx231xx.h"
#include "cx231xx-vbi.h"
static inline void print_err_status(struct cx231xx *dev, int packet, int status)
@@ -69,10 +69,10 @@ static inline void print_err_status(struct cx231xx *dev, int packet, int status)
break;
}
if (packet < 0) {
- cx231xx_err("URB status %d [%s].\n", status,
+ pr_err("URB status %d [%s].\n", status,
errmsg);
} else {
- cx231xx_err("URB packet %d, status %d [%s].\n",
+ pr_err("URB packet %d, status %d [%s].\n",
packet, status, errmsg);
}
}
@@ -316,7 +316,7 @@ static void cx231xx_irq_vbi_callback(struct urb *urb)
case -ESHUTDOWN:
return;
default: /* error */
- cx231xx_err("urb completition error %d.\n",
+ pr_err("urb completition error %d.\n",
urb->status);
break;
}
@@ -331,7 +331,7 @@ static void cx231xx_irq_vbi_callback(struct urb *urb)
urb->status = usb_submit_urb(urb, GFP_ATOMIC);
if (urb->status) {
- cx231xx_err("urb resubmit failed (error=%i)\n",
+ pr_err("urb resubmit failed (error=%i)\n",
urb->status);
}
}
@@ -344,7 +344,7 @@ void cx231xx_uninit_vbi_isoc(struct cx231xx *dev)
struct urb *urb;
int i;
- cx231xx_info("called cx231xx_uninit_vbi_isoc\n");
+ pr_info("called cx231xx_uninit_vbi_isoc\n");
dev->vbi_mode.bulk_ctl.nfields = -1;
for (i = 0; i < dev->vbi_mode.bulk_ctl.num_bufs; i++) {
@@ -393,7 +393,7 @@ int cx231xx_init_vbi_isoc(struct cx231xx *dev, int max_packets,
struct urb *urb;
int rc;
- cx231xx_info("called cx231xx_vbi_isoc\n");
+ pr_info("called cx231xx_vbi_isoc\n");
/* De-allocates all pending stuff */
cx231xx_uninit_vbi_isoc(dev);
@@ -419,14 +419,14 @@ int cx231xx_init_vbi_isoc(struct cx231xx *dev, int max_packets,
dev->vbi_mode.bulk_ctl.urb = kzalloc(sizeof(void *) * num_bufs,
GFP_KERNEL);
if (!dev->vbi_mode.bulk_ctl.urb) {
- cx231xx_errdev("cannot alloc memory for usb buffers\n");
+ pr_err("cannot alloc memory for usb buffers\n");
return -ENOMEM;
}
dev->vbi_mode.bulk_ctl.transfer_buffer =
kzalloc(sizeof(void *) * num_bufs, GFP_KERNEL);
if (!dev->vbi_mode.bulk_ctl.transfer_buffer) {
- cx231xx_errdev("cannot allocate memory for usbtransfer\n");
+ pr_err("cannot allocate memory for usbtransfer\n");
kfree(dev->vbi_mode.bulk_ctl.urb);
return -ENOMEM;
}
@@ -441,7 +441,7 @@ int cx231xx_init_vbi_isoc(struct cx231xx *dev, int max_packets,
urb = usb_alloc_urb(0, GFP_KERNEL);
if (!urb) {
- cx231xx_err("cannot alloc bulk_ctl.urb %i\n", i);
+ pr_err("cannot alloc bulk_ctl.urb %i\n", i);
cx231xx_uninit_vbi_isoc(dev);
return -ENOMEM;
}
@@ -451,7 +451,7 @@ int cx231xx_init_vbi_isoc(struct cx231xx *dev, int max_packets,
dev->vbi_mode.bulk_ctl.transfer_buffer[i] =
kzalloc(sb_size, GFP_KERNEL);
if (!dev->vbi_mode.bulk_ctl.transfer_buffer[i]) {
- cx231xx_err("unable to allocate %i bytes for transfer"
+ pr_err("unable to allocate %i bytes for transfer"
" buffer %i%s\n", sb_size, i,
in_interrupt() ? " while in int" : "");
cx231xx_uninit_vbi_isoc(dev);
@@ -470,7 +470,7 @@ int cx231xx_init_vbi_isoc(struct cx231xx *dev, int max_packets,
for (i = 0; i < dev->vbi_mode.bulk_ctl.num_bufs; i++) {
rc = usb_submit_urb(dev->vbi_mode.bulk_ctl.urb[i], GFP_ATOMIC);
if (rc) {
- cx231xx_err("submit of urb %i failed (error=%i)\n", i,
+ pr_err("submit of urb %i failed (error=%i)\n", i,
rc);
cx231xx_uninit_vbi_isoc(dev);
return rc;
@@ -522,7 +522,7 @@ static inline void vbi_buffer_filled(struct cx231xx *dev,
struct cx231xx_buffer *buf)
{
/* Advice that buffer was filled */
- /* cx231xx_info("[%p/%d] wakeup\n", buf, buf->vb.i); */
+ /* pr_info("[%p/%d] wakeup\n", buf, buf->vb.i); */
buf->vb.state = VIDEOBUF_DONE;
buf->vb.field_count++;
@@ -614,7 +614,7 @@ static inline void get_next_vbi_buf(struct cx231xx_dmaqueue *dma_q,
char *outp;
if (list_empty(&dma_q->active)) {
- cx231xx_err("No active queue to serve\n");
+ pr_err("No active queue to serve\n");
dev->vbi_mode.bulk_ctl.buf = NULL;
*buf = NULL;
return;
diff --git a/drivers/media/usb/cx231xx/cx231xx-video.c b/drivers/media/usb/cx231xx/cx231xx-video.c
index 3b3ada6562ca..bda5597b5eff 100644
--- a/drivers/media/usb/cx231xx/cx231xx-video.c
+++ b/drivers/media/usb/cx231xx/cx231xx-video.c
@@ -22,6 +22,7 @@
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
+#include "cx231xx.h"
#include <linux/init.h>
#include <linux/list.h>
#include <linux/module.h>
@@ -41,7 +42,6 @@
#include "dvb_frontend.h"
-#include "cx231xx.h"
#include "cx231xx-vbi.h"
#define CX231XX_VERSION "0.0.2"
@@ -737,7 +737,7 @@ buffer_prepare(struct videobuf_queue *vq, struct videobuf_buffer *vb,
if (!dev->video_mode.bulk_ctl.num_bufs)
urb_init = 1;
}
- /*cx231xx_info("urb_init=%d dev->video_mode.max_pkt_size=%d\n",
+ /*pr_info("urb_init=%d dev->video_mode.max_pkt_size=%d\n",
urb_init, dev->video_mode.max_pkt_size);*/
if (urb_init) {
dev->mode_tv = 0;
@@ -809,7 +809,7 @@ void video_mux(struct cx231xx *dev, int index)
cx231xx_set_audio_input(dev, dev->ctl_ainput);
- cx231xx_info("video_mux : %d\n", index);
+ pr_info("video_mux : %d\n", index);
/* do mode control overrides if required */
cx231xx_do_mode_ctrl_overrides(dev);
@@ -861,7 +861,7 @@ static void res_free(struct cx231xx_fh *fh)
static int check_dev(struct cx231xx *dev)
{
if (dev->state & DEV_DISCONNECTED) {
- cx231xx_errdev("v4l2 ioctl: device not present\n");
+ pr_err("v4l2 ioctl: device not present\n");
return -ENODEV;
}
return 0;
@@ -953,12 +953,12 @@ static int vidioc_s_fmt_vid_cap(struct file *file, void *priv,
return -EINVAL;
if (videobuf_queue_is_busy(&fh->vb_vidq)) {
- cx231xx_errdev("%s queue busy\n", __func__);
+ pr_err("%s queue busy\n", __func__);
return -EBUSY;
}
if (dev->stream_on && !fh->stream_on) {
- cx231xx_errdev("%s device in use by another fh\n", __func__);
+ pr_err("%s device in use by another fh\n", __func__);
return -EBUSY;
}
@@ -1176,9 +1176,9 @@ int cx231xx_s_frequency(struct file *file, void *priv,
int rc;
u32 if_frequency = 5400000;
- cx231xx_info("Enter vidioc_s_frequency()f->frequency=%d;f->type=%d\n",
+ pr_info("Enter vidioc_s_frequency()f->frequency=%d;f->type=%d\n",
f->frequency, f->type);
- /*cx231xx_info("f->type: 1-radio 2-analogTV 3-digitalTV\n");*/
+ /*pr_info("f->type: 1-radio 2-analogTV 3-digitalTV\n");*/
rc = check_dev(dev);
if (rc < 0)
@@ -1213,13 +1213,13 @@ int cx231xx_s_frequency(struct file *file, void *priv,
else if (dev->norm & V4L2_STD_SECAM_LC)
if_frequency = 1250000; /*1.25MHz */
- cx231xx_info("if_frequency is set to %d\n", if_frequency);
+ pr_info("if_frequency is set to %d\n", if_frequency);
cx231xx_set_Colibri_For_LowIF(dev, if_frequency, 1, 1);
update_HH_register_after_set_DIF(dev);
}
- cx231xx_info("Set New FREQUENCY to %d\n", f->frequency);
+ pr_info("Set New FREQUENCY to %d\n", f->frequency);
return rc;
}
@@ -1523,7 +1523,7 @@ static int vidioc_s_fmt_vbi_cap(struct file *file, void *priv,
struct cx231xx *dev = fh->dev;
if (dev->vbi_stream_on && !fh->stream_on) {
- cx231xx_errdev("%s device in use by another fh\n", __func__);
+ pr_err("%s device in use by another fh\n", __func__);
return -EBUSY;
}
return vidioc_try_fmt_vbi_cap(file, priv, f);
@@ -1642,7 +1642,7 @@ static int cx231xx_v4l2_open(struct file *filp)
#if 0
errCode = cx231xx_set_mode(dev, CX231XX_ANALOG_MODE);
if (errCode < 0) {
- cx231xx_errdev
+ pr_err
("Device locked on digital mode. Can't open analog\n");
return -EBUSY;
}
@@ -1650,7 +1650,7 @@ static int cx231xx_v4l2_open(struct file *filp)
fh = kzalloc(sizeof(struct cx231xx_fh), GFP_KERNEL);
if (!fh) {
- cx231xx_errdev("cx231xx-video.c: Out of memory?!\n");
+ pr_err("cx231xx-video.c: Out of memory?!\n");
return -ENOMEM;
}
if (mutex_lock_interruptible(&dev->lock)) {
@@ -1736,7 +1736,7 @@ void cx231xx_release_analog_resources(struct cx231xx *dev)
dev->radio_dev = NULL;
}
if (dev->vbi_dev) {
- cx231xx_info("V4L2 device %s deregistered\n",
+ pr_info("V4L2 device %s deregistered\n",
video_device_node_name(dev->vbi_dev));
if (video_is_registered(dev->vbi_dev))
video_unregister_device(dev->vbi_dev);
@@ -1745,7 +1745,7 @@ void cx231xx_release_analog_resources(struct cx231xx *dev)
dev->vbi_dev = NULL;
}
if (dev->vdev) {
- cx231xx_info("V4L2 device %s deregistered\n",
+ pr_info("V4L2 device %s deregistered\n",
video_device_node_name(dev->vdev));
if (dev->board.has_417)
@@ -2080,7 +2080,7 @@ int cx231xx_register_analog_devices(struct cx231xx *dev)
{
int ret;
- cx231xx_info("%s: v4l2 driver version %s\n",
+ pr_info("%s: v4l2 driver version %s\n",
dev->name, CX231XX_VERSION);
/* set default norm */
@@ -2119,7 +2119,7 @@ int cx231xx_register_analog_devices(struct cx231xx *dev)
/* allocate and fill video video_device struct */
dev->vdev = cx231xx_vdev_init(dev, &cx231xx_video_template, "video");
if (!dev->vdev) {
- cx231xx_errdev("cannot allocate video_device.\n");
+ pr_err("cannot allocate video_device.\n");
return -ENODEV;
}
@@ -2128,12 +2128,12 @@ int cx231xx_register_analog_devices(struct cx231xx *dev)
ret = video_register_device(dev->vdev, VFL_TYPE_GRABBER,
video_nr[dev->devno]);
if (ret) {
- cx231xx_errdev("unable to register video device (error=%i).\n",
+ pr_err("unable to register video device (error=%i).\n",
ret);
return ret;
}
- cx231xx_info("%s/0: registered device %s [v4l2]\n",
+ pr_info("%s/0: registered device %s [v4l2]\n",
dev->name, video_device_node_name(dev->vdev));
/* Initialize VBI template */
@@ -2144,7 +2144,7 @@ int cx231xx_register_analog_devices(struct cx231xx *dev)
dev->vbi_dev = cx231xx_vdev_init(dev, &cx231xx_vbi_template, "vbi");
if (!dev->vbi_dev) {
- cx231xx_errdev("cannot allocate video_device.\n");
+ pr_err("cannot allocate video_device.\n");
return -ENODEV;
}
dev->vbi_dev->ctrl_handler = &dev->ctrl_handler;
@@ -2152,32 +2152,32 @@ int cx231xx_register_analog_devices(struct cx231xx *dev)
ret = video_register_device(dev->vbi_dev, VFL_TYPE_VBI,
vbi_nr[dev->devno]);
if (ret < 0) {
- cx231xx_errdev("unable to register vbi device\n");
+ pr_err("unable to register vbi device\n");
return ret;
}
- cx231xx_info("%s/0: registered device %s\n",
+ pr_info("%s/0: registered device %s\n",
dev->name, video_device_node_name(dev->vbi_dev));
if (cx231xx_boards[dev->model].radio.type == CX231XX_RADIO) {
dev->radio_dev = cx231xx_vdev_init(dev, &cx231xx_radio_template,
"radio");
if (!dev->radio_dev) {
- cx231xx_errdev("cannot allocate video_device.\n");
+ pr_err("cannot allocate video_device.\n");
return -ENODEV;
}
dev->radio_dev->ctrl_handler = &dev->radio_ctrl_handler;
ret = video_register_device(dev->radio_dev, VFL_TYPE_RADIO,
radio_nr[dev->devno]);
if (ret < 0) {
- cx231xx_errdev("can't register radio device\n");
+ pr_err("can't register radio device\n");
return ret;
}
- cx231xx_info("Registered radio device as %s\n",
+ pr_info("Registered radio device as %s\n",
video_device_node_name(dev->radio_dev));
}
- cx231xx_info("V4L2 device registered as %s and %s\n",
+ pr_info("V4L2 device registered as %s and %s\n",
video_device_node_name(dev->vdev),
video_device_node_name(dev->vbi_dev));
diff --git a/drivers/media/usb/cx231xx/cx231xx.h b/drivers/media/usb/cx231xx/cx231xx.h
index a0ec24176522..fa27e0c2accb 100644
--- a/drivers/media/usb/cx231xx/cx231xx.h
+++ b/drivers/media/usb/cx231xx/cx231xx.h
@@ -22,6 +22,8 @@
#ifndef _CX231XX_H
#define _CX231XX_H
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/videodev2.h>
#include <linux/types.h>
#include <linux/ioctl.h>
@@ -981,23 +983,6 @@ void cx231xx_ir_exit(struct cx231xx *dev);
#define cx231xx_ir_exit(dev) (0)
#endif
-
-/* printk macros */
-
-#define cx231xx_err(fmt, arg...) do {\
- printk(KERN_ERR fmt , ##arg); } while (0)
-
-#define cx231xx_errdev(fmt, arg...) do {\
- printk(KERN_ERR "%s: "fmt,\
- dev->name , ##arg); } while (0)
-
-#define cx231xx_info(fmt, arg...) do {\
- printk(KERN_INFO "%s: "fmt,\
- dev->name , ##arg); } while (0)
-#define cx231xx_warn(fmt, arg...) do {\
- printk(KERN_WARNING "%s: "fmt,\
- dev->name , ##arg); } while (0)
-
static inline unsigned int norm_maxw(struct cx231xx *dev)
{
if (dev->board.max_range_640_480)
--
1.9.3
^ permalink raw reply related [flat|nested] 18+ messages in thread* [PATCHv2 02/14] [media] cx231xx: Fix identation
2014-11-02 12:32 [PATCHv2 00/14] Reduce cx231xx verbosity and do some cleanups Mauro Carvalho Chehab
2014-11-02 12:32 ` [PATCHv2 01/14] [media] cx231xx: get rid of driver-defined printk macros Mauro Carvalho Chehab
@ 2014-11-02 12:32 ` Mauro Carvalho Chehab
2014-11-02 12:32 ` [PATCHv2 03/14] [media] cx231xx: Cleanup printk at the driver Mauro Carvalho Chehab
` (12 subsequent siblings)
14 siblings, 0 replies; 18+ messages in thread
From: Mauro Carvalho Chehab @ 2014-11-02 12:32 UTC (permalink / raw)
To: Linux Media Mailing List
Cc: Mauro Carvalho Chehab, Mauro Carvalho Chehab, Matthias Schwarzott,
Antti Palosaari, Hans Verkuil
One of the identation blocks is wrong. Fix it.
While here, replace pr_info by pr_debug inside such block and
add the function name to the print messages, as otherwise they
will not help much.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
diff --git a/drivers/media/usb/cx231xx/cx231xx-avcore.c b/drivers/media/usb/cx231xx/cx231xx-avcore.c
index 9185b05b4fbe..58b42e63405c 100644
--- a/drivers/media/usb/cx231xx/cx231xx-avcore.c
+++ b/drivers/media/usb/cx231xx/cx231xx-avcore.c
@@ -2534,34 +2534,38 @@ int cx231xx_initialize_stream_xfer(struct cx231xx *dev, u32 media_type)
break;
case TS1_serial_mode:
- pr_info("%s: set ts1 registers", __func__);
+ pr_debug("%s: set ts1 registers", __func__);
- if (dev->board.has_417) {
- pr_info(" MPEG\n");
- value &= 0xFFFFFFFC;
- value |= 0x3;
+ if (dev->board.has_417) {
+ pr_debug("%s: MPEG\n", __func__);
+ value &= 0xFFFFFFFC;
+ value |= 0x3;
- status = cx231xx_mode_register(dev, TS_MODE_REG, value);
+ status = cx231xx_mode_register(dev,
+ TS_MODE_REG, value);
- val[0] = 0x04;
- val[1] = 0xA3;
- val[2] = 0x3B;
- val[3] = 0x00;
- status = cx231xx_write_ctrl_reg(dev, VRT_SET_REGISTER,
- TS1_CFG_REG, val, 4);
+ val[0] = 0x04;
+ val[1] = 0xA3;
+ val[2] = 0x3B;
+ val[3] = 0x00;
+ status = cx231xx_write_ctrl_reg(dev,
+ VRT_SET_REGISTER,
+ TS1_CFG_REG, val, 4);
- val[0] = 0x00;
- val[1] = 0x08;
- val[2] = 0x00;
- val[3] = 0x08;
- status = cx231xx_write_ctrl_reg(dev, VRT_SET_REGISTER,
- TS1_LENGTH_REG, val, 4);
-
- } else {
- pr_info(" BDA\n");
- status = cx231xx_mode_register(dev, TS_MODE_REG, 0x101);
- status = cx231xx_mode_register(dev, TS1_CFG_REG, 0x010);
- }
+ val[0] = 0x00;
+ val[1] = 0x08;
+ val[2] = 0x00;
+ val[3] = 0x08;
+ status = cx231xx_write_ctrl_reg(dev,
+ VRT_SET_REGISTER,
+ TS1_LENGTH_REG, val, 4);
+ } else {
+ pr_debug("%s: BDA\n", __func__);
+ status = cx231xx_mode_register(dev,
+ TS_MODE_REG, 0x101);
+ status = cx231xx_mode_register(dev,
+ TS1_CFG_REG, 0x010);
+ }
break;
case TS1_parallel_mode:
--
1.9.3
^ permalink raw reply related [flat|nested] 18+ messages in thread* [PATCHv2 03/14] [media] cx231xx: Cleanup printk at the driver
2014-11-02 12:32 [PATCHv2 00/14] Reduce cx231xx verbosity and do some cleanups Mauro Carvalho Chehab
2014-11-02 12:32 ` [PATCHv2 01/14] [media] cx231xx: get rid of driver-defined printk macros Mauro Carvalho Chehab
2014-11-02 12:32 ` [PATCHv2 02/14] [media] cx231xx: Fix identation Mauro Carvalho Chehab
@ 2014-11-02 12:32 ` Mauro Carvalho Chehab
2014-11-02 12:32 ` [PATCHv2 04/14] [media] cx25840: Don't report an error if max size is adjusted Mauro Carvalho Chehab
` (11 subsequent siblings)
14 siblings, 0 replies; 18+ messages in thread
From: Mauro Carvalho Chehab @ 2014-11-02 12:32 UTC (permalink / raw)
To: Linux Media Mailing List
Cc: Mauro Carvalho Chehab, Mauro Carvalho Chehab, Hans Verkuil,
Laurent Pinchart, Ramakrishnan Muthukrishnan, Sakari Ailus,
Takashi Iwai, Matthias Schwarzott, Antti Palosaari, Prabhakar Lad,
Peter Senna Tschudin
There are lots of debug printks printed with pr_info. Also, the
printk's data are not too coherent:
- there are duplicated driver name at the print format;
- function name format string differs from function to function;
- long strings broken into multiple lines;
- some printks just produce ugly reports, being almost useless
as-is.
Do a cleanup on that.
Still, there are much to be done in order to do a better printk
job on this driver, but, at least it will now be a way less
verbose, if debug printks are disabled, and some logs might
actually be useful.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
diff --git a/drivers/media/usb/cx231xx/cx231xx-417.c b/drivers/media/usb/cx231xx/cx231xx-417.c
index d678f4587ab4..a0d1156d1df1 100644
--- a/drivers/media/usb/cx231xx/cx231xx-417.c
+++ b/drivers/media/usb/cx231xx/cx231xx-417.c
@@ -90,10 +90,10 @@ static unsigned int v4l_debug = 1;
module_param(v4l_debug, int, 0644);
MODULE_PARM_DESC(v4l_debug, "enable V4L debug messages");
-#define dprintk(level, fmt, arg...)\
- do { if (v4l_debug >= level) \
- pr_info("%s: " fmt, \
- (dev) ? dev->name : "cx231xx[?]", ## arg); \
+#define dprintk(level, fmt, arg...) \
+ do { \
+ if (v4l_debug >= level) \
+ printk(KERN_DEBUG pr_fmt(fmt), ## arg); \
} while (0)
static struct cx231xx_tvnorm cx231xx_tvnorms[] = {
@@ -1114,15 +1114,15 @@ static int cx231xx_initialize_codec(struct cx231xx *dev)
cx231xx_disable656(dev);
retval = cx231xx_api_cmd(dev, CX2341X_ENC_PING_FW, 0, 0); /* ping */
if (retval < 0) {
- dprintk(2, "%s() PING OK\n", __func__);
+ dprintk(2, "%s: PING OK\n", __func__);
retval = cx231xx_load_firmware(dev);
if (retval < 0) {
- pr_err("%s() f/w load failed\n", __func__);
+ pr_err("%s: f/w load failed\n", __func__);
return retval;
}
retval = cx231xx_find_mailbox(dev);
if (retval < 0) {
- pr_err("%s() mailbox < 0, error\n",
+ pr_err("%s: mailbox < 0, error\n",
__func__);
return -1;
}
@@ -1798,7 +1798,6 @@ static unsigned int mpeg_poll(struct file *file,
static int mpeg_mmap(struct file *file, struct vm_area_struct *vma)
{
struct cx231xx_fh *fh = file->private_data;
- struct cx231xx *dev = fh->dev;
dprintk(2, "%s()\n", __func__);
diff --git a/drivers/media/usb/cx231xx/cx231xx-audio.c b/drivers/media/usb/cx231xx/cx231xx-audio.c
index 8312388edabb..e96703180c0c 100644
--- a/drivers/media/usb/cx231xx/cx231xx-audio.c
+++ b/drivers/media/usb/cx231xx/cx231xx-audio.c
@@ -277,7 +277,7 @@ static int cx231xx_init_audio_isoc(struct cx231xx *dev)
int i, errCode;
int sb_size;
- pr_info("%s: Starting ISO AUDIO transfers\n", __func__);
+ pr_debug("%s: Starting ISO AUDIO transfers\n", __func__);
if (dev->state & DEV_DISCONNECTED)
return -ENODEV;
@@ -338,7 +338,7 @@ static int cx231xx_init_audio_bulk(struct cx231xx *dev)
int i, errCode;
int sb_size;
- pr_info("%s: Starting BULK AUDIO transfers\n", __func__);
+ pr_debug("%s: Starting BULK AUDIO transfers\n", __func__);
if (dev->state & DEV_DISCONNECTED)
return -ENODEV;
@@ -439,8 +439,7 @@ static int snd_cx231xx_capture_open(struct snd_pcm_substream *substream)
dprintk("opening device and trying to acquire exclusive lock\n");
if (!dev) {
- pr_err("BUG: cx231xx can't find device struct."
- " Can't proceed with open\n");
+ pr_err("BUG: cx231xx can't find device struct. Can't proceed with open\n");
return -ENODEV;
}
@@ -662,8 +661,7 @@ static int cx231xx_audio_init(struct cx231xx *dev)
return 0;
}
- pr_info("cx231xx-audio.c: probing for cx231xx "
- "non standard usbaudio\n");
+ pr_debug("probing for cx231xx non standard usbaudio\n");
err = snd_card_new(&dev->udev->dev, index[devnr], "Cx231xx Audio",
THIS_MODULE, 0, &card);
@@ -707,14 +705,12 @@ static int cx231xx_audio_init(struct cx231xx *dev)
bEndpointAddress;
adev->num_alt = uif->num_altsetting;
- pr_info("EndPoint Addr 0x%x, Alternate settings: %i\n",
- adev->end_point_addr, adev->num_alt);
+ pr_info("audio EndPoint Addr 0x%x, Alternate settings: %i\n",
+ adev->end_point_addr, adev->num_alt);
adev->alt_max_pkt_size = kmalloc(32 * adev->num_alt, GFP_KERNEL);
- if (adev->alt_max_pkt_size == NULL) {
- pr_err("out of memory!\n");
+ if (adev->alt_max_pkt_size == NULL)
return -ENOMEM;
- }
for (i = 0; i < adev->num_alt; i++) {
u16 tmp =
@@ -722,7 +718,7 @@ static int cx231xx_audio_init(struct cx231xx *dev)
wMaxPacketSize);
adev->alt_max_pkt_size[i] =
(tmp & 0x07ff) * (((tmp & 0x1800) >> 11) + 1);
- pr_info("Alternate setting %i, max size= %i\n", i,
+ pr_debug("audio alternate setting %i, max size= %i\n", i,
adev->alt_max_pkt_size[i]);
}
diff --git a/drivers/media/usb/cx231xx/cx231xx-avcore.c b/drivers/media/usb/cx231xx/cx231xx-avcore.c
index 58b42e63405c..62c63b9e2291 100644
--- a/drivers/media/usb/cx231xx/cx231xx-avcore.c
+++ b/drivers/media/usb/cx231xx/cx231xx-avcore.c
@@ -83,10 +83,10 @@ void initGPIO(struct cx231xx *dev)
cx231xx_send_gpio_cmd(dev, _gpio_direction, (u8 *)&value, 4, 0, 0);
verve_read_byte(dev, 0x07, &val);
- pr_info(" verve_read_byte address0x07=0x%x\n", val);
+ pr_debug("verve_read_byte address0x07=0x%x\n", val);
verve_write_byte(dev, 0x07, 0xF4);
verve_read_byte(dev, 0x07, &val);
- pr_info(" verve_read_byte address0x07=0x%x\n", val);
+ pr_debug("verve_read_byte address0x07=0x%x\n", val);
cx231xx_capture_start(dev, 1, Vbi);
@@ -156,22 +156,22 @@ int cx231xx_afe_init_super_block(struct cx231xx *dev, u32 ref_count)
while (afe_power_status != 0x18) {
status = afe_write_byte(dev, SUP_BLK_PWRDN, 0x18);
if (status < 0) {
- pr_info(
- ": Init Super Block failed in send cmd\n");
+ pr_debug("%s: Init Super Block failed in send cmd\n",
+ __func__);
break;
}
status = afe_read_byte(dev, SUP_BLK_PWRDN, &afe_power_status);
afe_power_status &= 0xff;
if (status < 0) {
- pr_info(
- ": Init Super Block failed in receive cmd\n");
+ pr_debug("%s: Init Super Block failed in receive cmd\n",
+ __func__);
break;
}
i++;
if (i == 10) {
- pr_info(
- ": Init Super Block force break in loop !!!!\n");
+ pr_debug("%s: Init Super Block force break in loop !!!!\n",
+ __func__);
status = -1;
break;
}
@@ -410,7 +410,7 @@ int cx231xx_afe_update_power_control(struct cx231xx *dev,
status |= afe_write_byte(dev, ADC_PWRDN_CLAMP_CH3,
0x00);
} else {
- pr_info("Invalid AV mode input\n");
+ pr_debug("Invalid AV mode input\n");
status = -1;
}
break;
@@ -467,7 +467,7 @@ int cx231xx_afe_update_power_control(struct cx231xx *dev,
status |= afe_write_byte(dev, ADC_PWRDN_CLAMP_CH3,
0x40);
} else {
- pr_info("Invalid AV mode input\n");
+ pr_debug("Invalid AV mode input\n");
status = -1;
}
} /* switch */
@@ -628,8 +628,7 @@ int cx231xx_set_decoder_video_input(struct cx231xx *dev,
if (pin_type != dev->video_input) {
status = cx231xx_afe_adjust_ref_count(dev, pin_type);
if (status < 0) {
- pr_err("%s: adjust_ref_count :Failed to set"
- "AFE input mux - errCode [%d]!\n",
+ pr_err("%s: adjust_ref_count :Failed to set AFE input mux - errCode [%d]!\n",
__func__, status);
return status;
}
@@ -638,9 +637,8 @@ int cx231xx_set_decoder_video_input(struct cx231xx *dev,
/* call afe block to set video inputs */
status = cx231xx_afe_set_input_mux(dev, input);
if (status < 0) {
- pr_err("%s: set_input_mux :Failed to set"
- " AFE input mux - errCode [%d]!\n",
- __func__, status);
+ pr_err("%s: set_input_mux :Failed to set AFE input mux - errCode [%d]!\n",
+ __func__, status);
return status;
}
@@ -670,8 +668,7 @@ int cx231xx_set_decoder_video_input(struct cx231xx *dev,
/* Tell DIF object to go to baseband mode */
status = cx231xx_dif_set_standard(dev, DIF_USE_BASEBAND);
if (status < 0) {
- pr_err("%s: cx231xx_dif set to By pass"
- " mode- errCode [%d]!\n",
+ pr_err("%s: cx231xx_dif set to By pass mode- errCode [%d]!\n",
__func__, status);
return status;
}
@@ -715,8 +712,7 @@ int cx231xx_set_decoder_video_input(struct cx231xx *dev,
/* Tell DIF object to go to baseband mode */
status = cx231xx_dif_set_standard(dev, DIF_USE_BASEBAND);
if (status < 0) {
- pr_err("%s: cx231xx_dif set to By pass"
- " mode- errCode [%d]!\n",
+ pr_err("%s: cx231xx_dif set to By pass mode- errCode [%d]!\n",
__func__, status);
return status;
}
@@ -790,9 +786,8 @@ int cx231xx_set_decoder_video_input(struct cx231xx *dev,
status = cx231xx_dif_set_standard(dev,
DIF_USE_BASEBAND);
if (status < 0) {
- pr_err("%s: cx231xx_dif set to By pass"
- " mode- errCode [%d]!\n",
- __func__, status);
+ pr_err("%s: cx231xx_dif set to By pass mode- errCode [%d]!\n",
+ __func__, status);
return status;
}
@@ -826,9 +821,8 @@ int cx231xx_set_decoder_video_input(struct cx231xx *dev,
/* Reinitialize the DIF */
status = cx231xx_dif_set_standard(dev, dev->norm);
if (status < 0) {
- pr_err("%s: cx231xx_dif set to By pass"
- " mode- errCode [%d]!\n",
- __func__, status);
+ pr_err("%s: cx231xx_dif set to By pass mode- errCode [%d]!\n",
+ __func__, status);
return status;
}
@@ -970,14 +964,14 @@ int cx231xx_do_mode_ctrl_overrides(struct cx231xx *dev)
{
int status = 0;
- pr_info("do_mode_ctrl_overrides : 0x%x\n",
- (unsigned int)dev->norm);
+ pr_debug("%s: 0x%x\n",
+ __func__, (unsigned int)dev->norm);
/* Change the DFE_CTRL3 bp_percent to fix flagging */
status = vid_blk_write_word(dev, DFE_CTRL3, 0xCD3F0280);
if (dev->norm & (V4L2_STD_NTSC | V4L2_STD_PAL_M)) {
- pr_info("do_mode_ctrl_overrides NTSC\n");
+ pr_debug("%s: NTSC\n", __func__);
/* Move the close caption lines out of active video,
adjust the active video start point */
@@ -1004,7 +998,7 @@ int cx231xx_do_mode_ctrl_overrides(struct cx231xx *dev)
(FLD_HBLANK_CNT, 0x79));
} else if (dev->norm & V4L2_STD_SECAM) {
- pr_info("do_mode_ctrl_overrides SECAM\n");
+ pr_debug("%s: SECAM\n", __func__);
status = cx231xx_read_modify_write_i2c_dword(dev,
VID_BLK_I2C_ADDRESS,
VERT_TIM_CTRL,
@@ -1031,7 +1025,7 @@ int cx231xx_do_mode_ctrl_overrides(struct cx231xx *dev)
cx231xx_set_field
(FLD_HBLANK_CNT, 0x85));
} else {
- pr_info("do_mode_ctrl_overrides PAL\n");
+ pr_debug("%s: PAL\n", __func__);
status = cx231xx_read_modify_write_i2c_dword(dev,
VID_BLK_I2C_ADDRESS,
VERT_TIM_CTRL,
@@ -1331,113 +1325,113 @@ void cx231xx_dump_HH_reg(struct cx231xx *dev)
for (i = 0x100; i < 0x140; i++) {
vid_blk_read_word(dev, i, &value);
- pr_info("reg0x%x=0x%x\n", i, value);
+ pr_debug("reg0x%x=0x%x\n", i, value);
i = i+3;
}
for (i = 0x300; i < 0x400; i++) {
vid_blk_read_word(dev, i, &value);
- pr_info("reg0x%x=0x%x\n", i, value);
+ pr_debug("reg0x%x=0x%x\n", i, value);
i = i+3;
}
for (i = 0x400; i < 0x440; i++) {
vid_blk_read_word(dev, i, &value);
- pr_info("reg0x%x=0x%x\n", i, value);
+ pr_debug("reg0x%x=0x%x\n", i, value);
i = i+3;
}
vid_blk_read_word(dev, AFE_CTRL_C2HH_SRC_CTRL, &value);
- pr_info("AFE_CTRL_C2HH_SRC_CTRL=0x%x\n", value);
+ pr_debug("AFE_CTRL_C2HH_SRC_CTRL=0x%x\n", value);
vid_blk_write_word(dev, AFE_CTRL_C2HH_SRC_CTRL, 0x4485D390);
vid_blk_read_word(dev, AFE_CTRL_C2HH_SRC_CTRL, &value);
- pr_info("AFE_CTRL_C2HH_SRC_CTRL=0x%x\n", value);
+ pr_debug("AFE_CTRL_C2HH_SRC_CTRL=0x%x\n", value);
}
-void cx231xx_dump_SC_reg(struct cx231xx *dev)
+#if 0
+static void cx231xx_dump_SC_reg(struct cx231xx *dev)
{
u8 value[4] = { 0, 0, 0, 0 };
- pr_info("cx231xx_dump_SC_reg!\n");
+ pr_debug("%s!\n", __func__);
cx231xx_read_ctrl_reg(dev, VRT_GET_REGISTER, BOARD_CFG_STAT,
value, 4);
- pr_info("reg0x%x=0x%x 0x%x 0x%x 0x%x\n", BOARD_CFG_STAT, value[0],
+ pr_debug("reg0x%x=0x%x 0x%x 0x%x 0x%x\n", BOARD_CFG_STAT, value[0],
value[1], value[2], value[3]);
cx231xx_read_ctrl_reg(dev, VRT_GET_REGISTER, TS_MODE_REG,
value, 4);
- pr_info("reg0x%x=0x%x 0x%x 0x%x 0x%x\n", TS_MODE_REG, value[0],
+ pr_debug("reg0x%x=0x%x 0x%x 0x%x 0x%x\n", TS_MODE_REG, value[0],
value[1], value[2], value[3]);
cx231xx_read_ctrl_reg(dev, VRT_GET_REGISTER, TS1_CFG_REG,
value, 4);
- pr_info("reg0x%x=0x%x 0x%x 0x%x 0x%x\n", TS1_CFG_REG, value[0],
+ pr_debug("reg0x%x=0x%x 0x%x 0x%x 0x%x\n", TS1_CFG_REG, value[0],
value[1], value[2], value[3]);
cx231xx_read_ctrl_reg(dev, VRT_GET_REGISTER, TS1_LENGTH_REG,
value, 4);
- pr_info("reg0x%x=0x%x 0x%x 0x%x 0x%x\n", TS1_LENGTH_REG, value[0],
+ pr_debug("reg0x%x=0x%x 0x%x 0x%x 0x%x\n", TS1_LENGTH_REG, value[0],
value[1], value[2], value[3]);
cx231xx_read_ctrl_reg(dev, VRT_GET_REGISTER, TS2_CFG_REG,
value, 4);
- pr_info("reg0x%x=0x%x 0x%x 0x%x 0x%x\n", TS2_CFG_REG, value[0],
+ pr_debug("reg0x%x=0x%x 0x%x 0x%x 0x%x\n", TS2_CFG_REG, value[0],
value[1], value[2], value[3]);
cx231xx_read_ctrl_reg(dev, VRT_GET_REGISTER, TS2_LENGTH_REG,
value, 4);
- pr_info("reg0x%x=0x%x 0x%x 0x%x 0x%x\n", TS2_LENGTH_REG, value[0],
+ pr_debug("reg0x%x=0x%x 0x%x 0x%x 0x%x\n", TS2_LENGTH_REG, value[0],
value[1], value[2], value[3]);
cx231xx_read_ctrl_reg(dev, VRT_GET_REGISTER, EP_MODE_SET,
value, 4);
- pr_info("reg0x%x=0x%x 0x%x 0x%x 0x%x\n", EP_MODE_SET, value[0],
+ pr_debug("reg0x%x=0x%x 0x%x 0x%x 0x%x\n", EP_MODE_SET, value[0],
value[1], value[2], value[3]);
cx231xx_read_ctrl_reg(dev, VRT_GET_REGISTER, CIR_PWR_PTN1,
value, 4);
- pr_info("reg0x%x=0x%x 0x%x 0x%x 0x%x\n", CIR_PWR_PTN1, value[0],
+ pr_debug("reg0x%x=0x%x 0x%x 0x%x 0x%x\n", CIR_PWR_PTN1, value[0],
value[1], value[2], value[3]);
cx231xx_read_ctrl_reg(dev, VRT_GET_REGISTER, CIR_PWR_PTN2,
value, 4);
- pr_info("reg0x%x=0x%x 0x%x 0x%x 0x%x\n", CIR_PWR_PTN2, value[0],
+ pr_debug("reg0x%x=0x%x 0x%x 0x%x 0x%x\n", CIR_PWR_PTN2, value[0],
value[1], value[2], value[3]);
cx231xx_read_ctrl_reg(dev, VRT_GET_REGISTER, CIR_PWR_PTN3,
value, 4);
- pr_info("reg0x%x=0x%x 0x%x 0x%x 0x%x\n", CIR_PWR_PTN3, value[0],
+ pr_debug("reg0x%x=0x%x 0x%x 0x%x 0x%x\n", CIR_PWR_PTN3, value[0],
value[1], value[2], value[3]);
cx231xx_read_ctrl_reg(dev, VRT_GET_REGISTER, CIR_PWR_MASK0,
value, 4);
- pr_info("reg0x%x=0x%x 0x%x 0x%x 0x%x\n", CIR_PWR_MASK0, value[0],
+ pr_debug("reg0x%x=0x%x 0x%x 0x%x 0x%x\n", CIR_PWR_MASK0, value[0],
value[1], value[2], value[3]);
cx231xx_read_ctrl_reg(dev, VRT_GET_REGISTER, CIR_PWR_MASK1,
value, 4);
- pr_info("reg0x%x=0x%x 0x%x 0x%x 0x%x\n", CIR_PWR_MASK1, value[0],
+ pr_debug("reg0x%x=0x%x 0x%x 0x%x 0x%x\n", CIR_PWR_MASK1, value[0],
value[1], value[2], value[3]);
cx231xx_read_ctrl_reg(dev, VRT_GET_REGISTER, CIR_PWR_MASK2,
value, 4);
- pr_info("reg0x%x=0x%x 0x%x 0x%x 0x%x\n", CIR_PWR_MASK2, value[0],
+ pr_debug("reg0x%x=0x%x 0x%x 0x%x 0x%x\n", CIR_PWR_MASK2, value[0],
value[1], value[2], value[3]);
cx231xx_read_ctrl_reg(dev, VRT_GET_REGISTER, CIR_GAIN,
value, 4);
- pr_info("reg0x%x=0x%x 0x%x 0x%x 0x%x\n", CIR_GAIN, value[0],
+ pr_debug("reg0x%x=0x%x 0x%x 0x%x 0x%x\n", CIR_GAIN, value[0],
value[1], value[2], value[3]);
cx231xx_read_ctrl_reg(dev, VRT_GET_REGISTER, CIR_CAR_REG,
value, 4);
- pr_info("reg0x%x=0x%x 0x%x 0x%x 0x%x\n", CIR_CAR_REG, value[0],
+ pr_debug("reg0x%x=0x%x 0x%x 0x%x 0x%x\n", CIR_CAR_REG, value[0],
value[1], value[2], value[3]);
cx231xx_read_ctrl_reg(dev, VRT_GET_REGISTER, CIR_OT_CFG1,
value, 4);
- pr_info("reg0x%x=0x%x 0x%x 0x%x 0x%x\n", CIR_OT_CFG1, value[0],
+ pr_debug("reg0x%x=0x%x 0x%x 0x%x 0x%x\n", CIR_OT_CFG1, value[0],
value[1], value[2], value[3]);
cx231xx_read_ctrl_reg(dev, VRT_GET_REGISTER, CIR_OT_CFG2,
value, 4);
- pr_info("reg0x%x=0x%x 0x%x 0x%x 0x%x\n", CIR_OT_CFG2, value[0],
+ pr_debug("reg0x%x=0x%x 0x%x 0x%x 0x%x\n", CIR_OT_CFG2, value[0],
value[1], value[2], value[3]);
cx231xx_read_ctrl_reg(dev, VRT_GET_REGISTER, PWR_CTL_EN,
value, 4);
- pr_info("reg0x%x=0x%x 0x%x 0x%x 0x%x\n", PWR_CTL_EN, value[0],
+ pr_debug("reg0x%x=0x%x 0x%x 0x%x 0x%x\n", PWR_CTL_EN, value[0],
value[1], value[2], value[3]);
-
-
}
+#endif
void cx231xx_Setup_AFE_for_LowIF(struct cx231xx *dev)
@@ -1503,7 +1497,7 @@ void cx231xx_set_Colibri_For_LowIF(struct cx231xx *dev, u32 if_freq,
u32 standard = 0;
u8 value[4] = { 0, 0, 0, 0 };
- pr_info("Enter cx231xx_set_Colibri_For_LowIF()\n");
+ pr_debug("Enter cx231xx_set_Colibri_For_LowIF()\n");
value[0] = (u8) 0x6F;
value[1] = (u8) 0x6F;
value[2] = (u8) 0x6F;
@@ -1523,7 +1517,7 @@ void cx231xx_set_Colibri_For_LowIF(struct cx231xx *dev, u32 if_freq,
colibri_carrier_offset = cx231xx_Get_Colibri_CarrierOffset(mode,
standard);
- pr_info("colibri_carrier_offset=%d, standard=0x%x\n",
+ pr_debug("colibri_carrier_offset=%d, standard=0x%x\n",
colibri_carrier_offset, standard);
/* Set the band Pass filter for DIF*/
@@ -1557,7 +1551,7 @@ void cx231xx_set_DIF_bandpass(struct cx231xx *dev, u32 if_freq,
u64 pll_freq_u64 = 0;
u32 i = 0;
- pr_info("if_freq=%d;spectral_invert=0x%x;mode=0x%x\n",
+ pr_debug("if_freq=%d;spectral_invert=0x%x;mode=0x%x\n",
if_freq, spectral_invert, mode);
@@ -1601,7 +1595,7 @@ void cx231xx_set_DIF_bandpass(struct cx231xx *dev, u32 if_freq,
if_freq = 16000000;
}
- pr_info("Enter IF=%zu\n",
+ pr_debug("Enter IF=%zu\n",
ARRAY_SIZE(Dif_set_array));
for (i = 0; i < ARRAY_SIZE(Dif_set_array); i++) {
if (Dif_set_array[i].if_freq == if_freq) {
@@ -1714,7 +1708,7 @@ int cx231xx_dif_set_standard(struct cx231xx *dev, u32 standard)
u32 dif_misc_ctrl_value = 0;
u32 func_mode = 0;
- pr_info("%s: setStandard to %x\n", __func__, standard);
+ pr_debug("%s: setStandard to %x\n", __func__, standard);
status = vid_blk_read_word(dev, DIF_MISC_CTRL, &dif_misc_ctrl_value);
if (standard != DIF_USE_BASEBAND)
@@ -2117,8 +2111,8 @@ int cx231xx_tuner_post_channel_change(struct cx231xx *dev)
{
int status = 0;
u32 dwval;
- pr_info("cx231xx_tuner_post_channel_change dev->tuner_type =0%d\n",
- dev->tuner_type);
+ pr_debug("%s: dev->tuner_type =0%d\n",
+ __func__, dev->tuner_type);
/* Set the RF and IF k_agc values to 4 for PAL/NTSC and 8 for
* SECAM L/B/D standards */
status = vid_blk_read_word(dev, DIF_AGC_IF_REF, &dwval);
@@ -2219,8 +2213,8 @@ int cx231xx_set_power_mode(struct cx231xx *dev, enum AV_MODE mode)
if (dev->power_mode != mode)
dev->power_mode = mode;
else {
- pr_info(" setPowerMode::mode = %d, No Change req.\n",
- mode);
+ pr_debug("%s: mode = %d, No Change req.\n",
+ __func__, mode);
return 0;
}
@@ -2459,7 +2453,7 @@ int cx231xx_start_stream(struct cx231xx *dev, u32 ep_mask)
u32 tmp = 0;
int status = 0;
- pr_info("cx231xx_start_stream():: ep_mask = %x\n", ep_mask);
+ pr_debug("%s: ep_mask = %x\n", __func__, ep_mask);
status = cx231xx_read_ctrl_reg(dev, VRT_GET_REGISTER, EP_MODE_SET,
value, 4);
if (status < 0)
@@ -2484,7 +2478,7 @@ int cx231xx_stop_stream(struct cx231xx *dev, u32 ep_mask)
u32 tmp = 0;
int status = 0;
- pr_info("cx231xx_stop_stream():: ep_mask = %x\n", ep_mask);
+ pr_debug("%s: ep_mask = %x\n", __func__, ep_mask);
status =
cx231xx_read_ctrl_reg(dev, VRT_GET_REGISTER, EP_MODE_SET, value, 4);
if (status < 0)
@@ -2512,24 +2506,24 @@ int cx231xx_initialize_stream_xfer(struct cx231xx *dev, u32 media_type)
if (dev->udev->speed == USB_SPEED_HIGH) {
switch (media_type) {
case Audio:
- pr_info("%s: Audio enter HANC\n", __func__);
+ pr_debug("%s: Audio enter HANC\n", __func__);
status =
cx231xx_mode_register(dev, TS_MODE_REG, 0x9300);
break;
case Vbi:
- pr_info("%s: set vanc registers\n", __func__);
+ pr_debug("%s: set vanc registers\n", __func__);
status = cx231xx_mode_register(dev, TS_MODE_REG, 0x300);
break;
case Sliced_cc:
- pr_info("%s: set hanc registers\n", __func__);
+ pr_debug("%s: set hanc registers\n", __func__);
status =
cx231xx_mode_register(dev, TS_MODE_REG, 0x1300);
break;
case Raw_Video:
- pr_info("%s: set video registers\n", __func__);
+ pr_debug("%s: set video registers\n", __func__);
status = cx231xx_mode_register(dev, TS_MODE_REG, 0x100);
break;
@@ -2569,7 +2563,7 @@ int cx231xx_initialize_stream_xfer(struct cx231xx *dev, u32 media_type)
break;
case TS1_parallel_mode:
- pr_info("%s: set ts1 parallel mode registers\n",
+ pr_debug("%s: set ts1 parallel mode registers\n",
__func__);
status = cx231xx_mode_register(dev, TS_MODE_REG, 0x100);
status = cx231xx_mode_register(dev, TS1_CFG_REG, 0x400);
@@ -2923,7 +2917,7 @@ int cx231xx_gpio_i2c_read_ack(struct cx231xx *dev)
(nCnt > 0));
if (nCnt == 0)
- pr_info("No ACK after %d msec -GPIO I2C failed!",
+ pr_debug("No ACK after %d msec -GPIO I2C failed!",
nInit * 10);
/*
diff --git a/drivers/media/usb/cx231xx/cx231xx-cards.c b/drivers/media/usb/cx231xx/cx231xx-cards.c
index 375fd85447f8..d59f483102d2 100644
--- a/drivers/media/usb/cx231xx/cx231xx-cards.c
+++ b/drivers/media/usb/cx231xx/cx231xx-cards.c
@@ -856,8 +856,7 @@ int cx231xx_tuner_callback(void *ptr, int component, int command, int arg)
if (dev->tuner_type == TUNER_XC5000) {
if (command == XC5000_TUNER_RESET) {
- pr_info
- ("Tuner CB: RESET: cmd %d : tuner type %d \n",
+ pr_debug("Tuner CB: RESET: cmd %d : tuner type %d \n",
command, dev->tuner_type);
cx231xx_set_gpio_value(dev, dev->board.tuner_gpio->bit,
1);
@@ -917,7 +916,7 @@ void cx231xx_pre_card_setup(struct cx231xx *dev)
cx231xx_set_model(dev);
pr_info("Identified as %s (card=%d)\n",
- dev->board.name, dev->model);
+ dev->board.name, dev->model);
/* set the direction for GPIO pins */
if (dev->board.tuner_gpio) {
@@ -1008,7 +1007,7 @@ static int read_eeprom(struct cx231xx *dev, struct i2c_client *client,
}
for (i = 0; i + 15 < len; i += 16)
- pr_info("i2c eeprom %02x: %*ph\n", i, 16, &eedata[i]);
+ pr_debug("i2c eeprom %02x: %*ph\n", i, 16, &eedata[i]);
return 0;
}
@@ -1028,7 +1027,7 @@ void cx231xx_card_setup(struct cx231xx *dev)
cx231xx_get_i2c_adap(dev, I2C_0),
"cx25840", 0x88 >> 1, NULL);
if (dev->sd_cx25840 == NULL)
- pr_info("cx25840 subdev registration failure\n");
+ pr_err("cx25840 subdev registration failure\n");
cx25840_call(dev, core, load_fw);
}
@@ -1042,7 +1041,7 @@ void cx231xx_card_setup(struct cx231xx *dev)
"tuner",
dev->tuner_addr, NULL);
if (dev->sd_tuner == NULL)
- pr_info("tuner subdev registration failure\n");
+ pr_err("tuner subdev registration failure\n");
else
cx231xx_config_tuner(dev);
}
@@ -1290,21 +1289,19 @@ static int cx231xx_init_v4l2(struct cx231xx *dev,
dev->video_mode.end_point_addr = uif->altsetting[0].endpoint[isoc_pipe].desc.bEndpointAddress;
dev->video_mode.num_alt = uif->num_altsetting;
- pr_info("EndPoint Addr 0x%x, Alternate settings: %i\n",
+ pr_info("video EndPoint Addr 0x%x, Alternate settings: %i\n",
dev->video_mode.end_point_addr,
dev->video_mode.num_alt);
dev->video_mode.alt_max_pkt_size = devm_kmalloc_array(&udev->dev, 32, dev->video_mode.num_alt, GFP_KERNEL);
- if (dev->video_mode.alt_max_pkt_size == NULL) {
- pr_err("out of memory!\n");
+ if (dev->video_mode.alt_max_pkt_size == NULL)
return -ENOMEM;
- }
for (i = 0; i < dev->video_mode.num_alt; i++) {
u16 tmp = le16_to_cpu(uif->altsetting[i].endpoint[isoc_pipe].desc.wMaxPacketSize);
dev->video_mode.alt_max_pkt_size[i] = (tmp & 0x07ff) * (((tmp & 0x1800) >> 11) + 1);
- pr_info("Alternate setting %i, max size= %i\n", i,
- dev->video_mode.alt_max_pkt_size[i]);
+ pr_debug("Alternate setting %i, max size= %i\n", i,
+ dev->video_mode.alt_max_pkt_size[i]);
}
/* VBI Init */
@@ -1321,16 +1318,14 @@ static int cx231xx_init_v4l2(struct cx231xx *dev,
bEndpointAddress;
dev->vbi_mode.num_alt = uif->num_altsetting;
- pr_info("EndPoint Addr 0x%x, Alternate settings: %i\n",
+ pr_info("VBI EndPoint Addr 0x%x, Alternate settings: %i\n",
dev->vbi_mode.end_point_addr,
dev->vbi_mode.num_alt);
/* compute alternate max packet sizes for vbi */
dev->vbi_mode.alt_max_pkt_size = devm_kmalloc_array(&udev->dev, 32, dev->vbi_mode.num_alt, GFP_KERNEL);
- if (dev->vbi_mode.alt_max_pkt_size == NULL) {
- pr_err("out of memory!\n");
+ if (dev->vbi_mode.alt_max_pkt_size == NULL)
return -ENOMEM;
- }
for (i = 0; i < dev->vbi_mode.num_alt; i++) {
u16 tmp =
@@ -1338,8 +1333,8 @@ static int cx231xx_init_v4l2(struct cx231xx *dev,
desc.wMaxPacketSize);
dev->vbi_mode.alt_max_pkt_size[i] =
(tmp & 0x07ff) * (((tmp & 0x1800) >> 11) + 1);
- pr_info("Alternate setting %i, max size= %i\n", i,
- dev->vbi_mode.alt_max_pkt_size[i]);
+ pr_debug("Alternate setting %i, max size= %i\n", i,
+ dev->vbi_mode.alt_max_pkt_size[i]);
}
/* Sliced CC VBI init */
@@ -1357,23 +1352,20 @@ static int cx231xx_init_v4l2(struct cx231xx *dev,
bEndpointAddress;
dev->sliced_cc_mode.num_alt = uif->num_altsetting;
- pr_info("EndPoint Addr 0x%x, Alternate settings: %i\n",
- dev->sliced_cc_mode.end_point_addr,
- dev->sliced_cc_mode.num_alt);
+ pr_info("sliced CC EndPoint Addr 0x%x, Alternate settings: %i\n",
+ dev->sliced_cc_mode.end_point_addr,
+ dev->sliced_cc_mode.num_alt);
dev->sliced_cc_mode.alt_max_pkt_size = devm_kmalloc_array(&udev->dev, 32, dev->sliced_cc_mode.num_alt, GFP_KERNEL);
-
- if (dev->sliced_cc_mode.alt_max_pkt_size == NULL) {
- pr_err("out of memory!\n");
+ if (dev->sliced_cc_mode.alt_max_pkt_size == NULL)
return -ENOMEM;
- }
for (i = 0; i < dev->sliced_cc_mode.num_alt; i++) {
u16 tmp = le16_to_cpu(uif->altsetting[i].endpoint[isoc_pipe].
desc.wMaxPacketSize);
dev->sliced_cc_mode.alt_max_pkt_size[i] =
(tmp & 0x07ff) * (((tmp & 0x1800) >> 11) + 1);
- pr_info("Alternate setting %i, max size= %i\n", i,
- dev->sliced_cc_mode.alt_max_pkt_size[i]);
+ pr_debug("Alternate setting %i, max size= %i\n", i,
+ dev->sliced_cc_mode.alt_max_pkt_size[i]);
}
return 0;
@@ -1410,8 +1402,7 @@ static int cx231xx_usb_probe(struct usb_interface *interface,
nr = find_first_zero_bit(&cx231xx_devused, CX231XX_MAXBOARDS);
if (nr >= CX231XX_MAXBOARDS) {
/* No free device slots */
- pr_err(DRIVER_NAME ": Supports only %i devices.\n",
- CX231XX_MAXBOARDS);
+ pr_err("Supports only %i devices.\n", CX231XX_MAXBOARDS);
return -ENOMEM;
}
} while (test_and_set_bit(nr, &cx231xx_devused));
@@ -1421,7 +1412,6 @@ static int cx231xx_usb_probe(struct usb_interface *interface,
/* allocate memory for our device state and initialize it */
dev = devm_kzalloc(&udev->dev, sizeof(*dev), GFP_KERNEL);
if (dev == NULL) {
- pr_err(DRIVER_NAME ": out of memory!\n");
clear_bit(nr, &cx231xx_devused);
return -ENOMEM;
}
@@ -1468,14 +1458,13 @@ static int cx231xx_usb_probe(struct usb_interface *interface,
speed = "unknown";
}
- pr_info("New device %s %s @ %s Mbps "
- "(%04x:%04x) with %d interfaces\n",
- udev->manufacturer ? udev->manufacturer : "",
- udev->product ? udev->product : "",
- speed,
- le16_to_cpu(udev->descriptor.idVendor),
- le16_to_cpu(udev->descriptor.idProduct),
- dev->max_iad_interface_count);
+ pr_info("New device %s %s @ %s Mbps (%04x:%04x) with %d interfaces\n",
+ udev->manufacturer ? udev->manufacturer : "",
+ udev->product ? udev->product : "",
+ speed,
+ le16_to_cpu(udev->descriptor.idVendor),
+ le16_to_cpu(udev->descriptor.idProduct),
+ dev->max_iad_interface_count);
/* increment interface count */
dev->interface_count++;
@@ -1485,13 +1474,12 @@ static int cx231xx_usb_probe(struct usb_interface *interface,
assoc_desc = udev->actconfig->intf_assoc[0];
if (assoc_desc->bFirstInterface != ifnum) {
- pr_err(DRIVER_NAME ": Not found "
- "matching IAD interface\n");
+ pr_err("Not found matching IAD interface\n");
retval = -ENODEV;
goto err_if;
}
- pr_info("registering interface %d\n", ifnum);
+ pr_debug("registering interface %d\n", ifnum);
/* save our data pointer in this interface device */
usb_set_intfdata(interface, dev);
@@ -1527,13 +1515,12 @@ static int cx231xx_usb_probe(struct usb_interface *interface,
desc.bEndpointAddress;
dev->ts1_mode.num_alt = uif->num_altsetting;
- pr_info("EndPoint Addr 0x%x, Alternate settings: %i\n",
+ pr_info("TS EndPoint Addr 0x%x, Alternate settings: %i\n",
dev->ts1_mode.end_point_addr,
dev->ts1_mode.num_alt);
dev->ts1_mode.alt_max_pkt_size = devm_kmalloc_array(&udev->dev, 32, dev->ts1_mode.num_alt, GFP_KERNEL);
if (dev->ts1_mode.alt_max_pkt_size == NULL) {
- pr_err("out of memory!\n");
retval = -ENOMEM;
goto err_video_alt;
}
@@ -1544,7 +1531,7 @@ static int cx231xx_usb_probe(struct usb_interface *interface,
wMaxPacketSize);
dev->ts1_mode.alt_max_pkt_size[i] =
(tmp & 0x07ff) * (((tmp & 0x1800) >> 11) + 1);
- pr_info("Alternate setting %i, max size= %i\n", i,
+ pr_debug("Alternate setting %i, max size= %i\n", i,
dev->ts1_mode.alt_max_pkt_size[i]);
}
}
@@ -1609,10 +1596,8 @@ static void cx231xx_usb_disconnect(struct usb_interface *interface)
wake_up_interruptible_all(&dev->open);
if (dev->users) {
- pr_warn
- ("device %s is open! Deregistration and memory "
- "deallocation are deferred on close.\n",
- video_device_node_name(dev->vdev));
+ pr_warn("device %s is open! Deregistration and memory deallocation are deferred on close.\n",
+ video_device_node_name(dev->vdev));
/* Even having users, it is safe to remove the RC i2c driver */
cx231xx_ir_exit(dev);
diff --git a/drivers/media/usb/cx231xx/cx231xx-core.c b/drivers/media/usb/cx231xx/cx231xx-core.c
index 229e855fc7f2..c5842a1ea104 100644
--- a/drivers/media/usb/cx231xx/cx231xx-core.c
+++ b/drivers/media/usb/cx231xx/cx231xx-core.c
@@ -228,9 +228,8 @@ int cx231xx_send_usb_command(struct cx231xx_i2c *i2c_bus,
/* call common vendor command request */
status = cx231xx_send_vendor_cmd(dev, &ven_req);
if (status < 0) {
- pr_info
- ("UsbInterface::sendCommand, failed with status -%d\n",
- status);
+ pr_err("%s: failed with status -%d\n",
+ __func__, status);
}
return status;
@@ -524,9 +523,8 @@ int cx231xx_set_video_alternate(struct cx231xx *dev)
usb_set_interface(dev->udev, usb_interface_index,
dev->video_mode.alt);
if (errCode < 0) {
- pr_err
- ("cannot change alt number to %d (error=%i)\n",
- dev->video_mode.alt, errCode);
+ pr_err("cannot change alt number to %d (error=%i)\n",
+ dev->video_mode.alt, errCode);
return errCode;
}
}
@@ -600,9 +598,8 @@ int cx231xx_set_alt_setting(struct cx231xx *dev, u8 index, u8 alt)
}
if (alt > 0 && max_pkt_size == 0) {
- pr_err
- ("can't change interface %d alt no. to %d: Max. Pkt size = 0\n",
- usb_interface_index, alt);
+ pr_err("can't change interface %d alt no. to %d: Max. Pkt size = 0\n",
+ usb_interface_index, alt);
/*To workaround error number=-71 on EP0 for videograbber,
need add following codes.*/
if (dev->board.no_alt_vanc)
@@ -616,9 +613,8 @@ int cx231xx_set_alt_setting(struct cx231xx *dev, u8 index, u8 alt)
if (usb_interface_index > 0) {
status = usb_set_interface(dev->udev, usb_interface_index, alt);
if (status < 0) {
- pr_err
- ("can't change interface %d alt no. to %d (err=%i)\n",
- usb_interface_index, alt, status);
+ pr_err("can't change interface %d alt no. to %d (err=%i)\n",
+ usb_interface_index, alt, status);
return status;
}
}
@@ -767,17 +763,15 @@ int cx231xx_ep5_bulkout(struct cx231xx *dev, u8 *firmware, u16 size)
u32 *buffer;
buffer = kzalloc(4096, GFP_KERNEL);
- if (buffer == NULL) {
- pr_info("out of mem\n");
+ if (buffer == NULL)
return -ENOMEM;
- }
memcpy(&buffer[0], firmware, 4096);
ret = usb_bulk_msg(dev->udev, usb_sndbulkpipe(dev->udev, 5),
buffer, 4096, &actlen, 2000);
if (ret)
- pr_info("bulk message failed: %d (%d/%d)", ret,
+ pr_err("bulk message failed: %d (%d/%d)", ret,
size, actlen);
else {
errCode = actlen != size ? -1 : 0;
@@ -987,12 +981,8 @@ int cx231xx_init_isoc(struct cx231xx *dev, int max_packets,
cx231xx_uninit_isoc(dev);
dma_q->p_left_data = kzalloc(4096, GFP_KERNEL);
- if (dma_q->p_left_data == NULL) {
- pr_info("out of mem\n");
+ if (dma_q->p_left_data == NULL)
return -ENOMEM;
- }
-
-
dev->video_mode.isoc_ctl.isoc_copy = isoc_copy;
dev->video_mode.isoc_ctl.num_bufs = num_bufs;
@@ -1055,10 +1045,9 @@ int cx231xx_init_isoc(struct cx231xx *dev, int max_packets,
usb_alloc_coherent(dev->udev, sb_size, GFP_KERNEL,
&urb->transfer_dma);
if (!dev->video_mode.isoc_ctl.transfer_buffer[i]) {
- pr_err("unable to allocate %i bytes for transfer"
- " buffer %i%s\n",
- sb_size, i,
- in_interrupt() ? " while in int" : "");
+ pr_err("unable to allocate %i bytes for transfer buffer %i%s\n",
+ sb_size, i,
+ in_interrupt() ? " while in int" : "");
cx231xx_uninit_isoc(dev);
return -ENOMEM;
}
@@ -1091,7 +1080,7 @@ int cx231xx_init_isoc(struct cx231xx *dev, int max_packets,
GFP_ATOMIC);
if (rc) {
pr_err("submit of urb %i failed (error=%i)\n", i,
- rc);
+ rc);
cx231xx_uninit_isoc(dev);
return rc;
}
@@ -1189,10 +1178,9 @@ int cx231xx_init_bulk(struct cx231xx *dev, int max_packets,
usb_alloc_coherent(dev->udev, sb_size, GFP_KERNEL,
&urb->transfer_dma);
if (!dev->video_mode.bulk_ctl.transfer_buffer[i]) {
- pr_err("unable to allocate %i bytes for transfer"
- " buffer %i%s\n",
- sb_size, i,
- in_interrupt() ? " while in int" : "");
+ pr_err("unable to allocate %i bytes for transfer buffer %i%s\n",
+ sb_size, i,
+ in_interrupt() ? " while in int" : "");
cx231xx_uninit_bulk(dev);
return -ENOMEM;
}
@@ -1212,8 +1200,7 @@ int cx231xx_init_bulk(struct cx231xx *dev, int max_packets,
rc = usb_submit_urb(dev->video_mode.bulk_ctl.urb[i],
GFP_ATOMIC);
if (rc) {
- pr_err("submit of urb %i failed (error=%i)\n", i,
- rc);
+ pr_err("submit of urb %i failed (error=%i)\n", i,rc);
cx231xx_uninit_bulk(dev);
return rc;
}
@@ -1316,18 +1303,16 @@ int cx231xx_dev_init(struct cx231xx *dev)
errCode = cx231xx_set_power_mode(dev,
POLARIS_AVMODE_ENXTERNAL_AV);
if (errCode < 0) {
- pr_err
- ("%s: Failed to set Power - errCode [%d]!\n",
- __func__, errCode);
+ pr_err("%s: Failed to set Power - errCode [%d]!\n",
+ __func__, errCode);
return errCode;
}
} else {
errCode = cx231xx_set_power_mode(dev,
POLARIS_AVMODE_ANALOGT_TV);
if (errCode < 0) {
- pr_err
- ("%s: Failed to set Power - errCode [%d]!\n",
- __func__, errCode);
+ pr_err("%s: Failed to set Power - errCode [%d]!\n",
+ __func__, errCode);
return errCode;
}
}
@@ -1340,34 +1325,30 @@ int cx231xx_dev_init(struct cx231xx *dev)
/* initialize Colibri block */
errCode = cx231xx_afe_init_super_block(dev, 0x23c);
if (errCode < 0) {
- pr_err
- ("%s: cx231xx_afe init super block - errCode [%d]!\n",
- __func__, errCode);
+ pr_err("%s: cx231xx_afe init super block - errCode [%d]!\n",
+ __func__, errCode);
return errCode;
}
errCode = cx231xx_afe_init_channels(dev);
if (errCode < 0) {
- pr_err
- ("%s: cx231xx_afe init channels - errCode [%d]!\n",
- __func__, errCode);
+ pr_err("%s: cx231xx_afe init channels - errCode [%d]!\n",
+ __func__, errCode);
return errCode;
}
/* Set DIF in By pass mode */
errCode = cx231xx_dif_set_standard(dev, DIF_USE_BASEBAND);
if (errCode < 0) {
- pr_err
- ("%s: cx231xx_dif set to By pass mode - errCode [%d]!\n",
- __func__, errCode);
+ pr_err("%s: cx231xx_dif set to By pass mode - errCode [%d]!\n",
+ __func__, errCode);
return errCode;
}
/* I2S block related functions */
errCode = cx231xx_i2s_blk_initialize(dev);
if (errCode < 0) {
- pr_err
- ("%s: cx231xx_i2s block initialize - errCode [%d]!\n",
- __func__, errCode);
+ pr_err("%s: cx231xx_i2s block initialize - errCode [%d]!\n",
+ __func__, errCode);
return errCode;
}
@@ -1375,7 +1356,7 @@ int cx231xx_dev_init(struct cx231xx *dev)
errCode = cx231xx_init_ctrl_pin_status(dev);
if (errCode < 0) {
pr_err("%s: cx231xx_init ctrl pins - errCode [%d]!\n",
- __func__, errCode);
+ __func__, errCode);
return errCode;
}
@@ -1400,9 +1381,8 @@ int cx231xx_dev_init(struct cx231xx *dev)
break;
}
if (errCode < 0) {
- pr_err
- ("%s: cx231xx_AGC mode to Analog - errCode [%d]!\n",
- __func__, errCode);
+ pr_err("%s: cx231xx_AGC mode to Analog - errCode [%d]!\n",
+ __func__, errCode);
return errCode;
}
@@ -1477,9 +1457,8 @@ int cx231xx_send_gpio_cmd(struct cx231xx *dev, u32 gpio_bit, u8 *gpio_val,
/* call common vendor command request */
status = cx231xx_send_vendor_cmd(dev, &ven_req);
if (status < 0) {
- pr_info
- ("UsbInterface::sendCommand, failed with status -%d\n",
- status);
+ pr_err("%s: failed with status -%d\n",
+ __func__, status);
}
return status;
diff --git a/drivers/media/usb/cx231xx/cx231xx-dvb.c b/drivers/media/usb/cx231xx/cx231xx-dvb.c
index a743865b40c0..b6af923eb5a3 100644
--- a/drivers/media/usb/cx231xx/cx231xx-dvb.c
+++ b/drivers/media/usb/cx231xx/cx231xx-dvb.c
@@ -265,7 +265,7 @@ static int start_streaming(struct cx231xx_dvb *dvb)
struct cx231xx *dev = dvb->adapter.priv;
if (dev->USE_ISO) {
- pr_info("DVB transfer mode is ISO.\n");
+ pr_debug("DVB transfer mode is ISO.\n");
cx231xx_set_alt_setting(dev, INDEX_TS1, 4);
rc = cx231xx_set_mode(dev, CX231XX_DIGITAL_MODE);
if (rc < 0)
@@ -276,7 +276,7 @@ static int start_streaming(struct cx231xx_dvb *dvb)
dev->ts1_mode.max_pkt_size,
dvb_isoc_copy);
} else {
- pr_info("DVB transfer mode is BULK.\n");
+ pr_debug("DVB transfer mode is BULK.\n");
cx231xx_set_alt_setting(dev, INDEX_TS1, 0);
rc = cx231xx_set_mode(dev, CX231XX_DIGITAL_MODE);
if (rc < 0)
@@ -430,16 +430,14 @@ int cx231xx_reset_analog_tuner(struct cx231xx *dev)
if (dops->init != NULL && !dev->xc_fw_load_done) {
- pr_info("Reloading firmware for XC5000\n");
+ pr_debug("Reloading firmware for XC5000\n");
status = dops->init(dev->dvb->frontend);
if (status == 0) {
dev->xc_fw_load_done = 1;
- pr_info
- ("XC5000 firmware download completed\n");
+ pr_debug("XC5000 firmware download completed\n");
} else {
dev->xc_fw_load_done = 0;
- pr_info
- ("XC5000 firmware download failed !!!\n");
+ pr_debug("XC5000 firmware download failed !!!\n");
}
}
diff --git a/drivers/media/usb/cx231xx/cx231xx-i2c.c b/drivers/media/usb/cx231xx/cx231xx-i2c.c
index d4a468a60bd0..1a0d9efeb209 100644
--- a/drivers/media/usb/cx231xx/cx231xx-i2c.c
+++ b/drivers/media/usb/cx231xx/cx231xx-i2c.c
@@ -498,17 +498,18 @@ void cx231xx_do_i2c_scan(struct cx231xx *dev, int i2c_port)
memset(&client, 0, sizeof(client));
client.adapter = cx231xx_get_i2c_adap(dev, i2c_port);
- pr_info(": Checking for I2C devices on port=%d ..\n", i2c_port);
+ pr_info("i2c_scan: checking for I2C devices on port=%d ..\n",
+ i2c_port);
for (i = 0; i < 128; i++) {
client.addr = i;
rc = i2c_master_recv(&client, &buf, 0);
if (rc < 0)
continue;
- pr_info("%s: i2c scan: found device @ 0x%x [%s]\n",
- dev->name, i << 1,
- i2c_devs[i] ? i2c_devs[i] : "???");
+ pr_info("i2c scan: found device @ 0x%x [%s]\n",
+ i << 1,
+ i2c_devs[i] ? i2c_devs[i] : "???");
}
- pr_info(": Completed Checking for I2C devices on port=%d.\n",
+ pr_info("i2c scan: Completed Checking for I2C devices on port=%d.\n",
i2c_port);
}
@@ -532,8 +533,7 @@ int cx231xx_i2c_register(struct cx231xx_i2c *bus)
i2c_add_adapter(&bus->i2c_adap);
if (0 != bus->i2c_rc)
- pr_warn("%s: i2c bus %d register FAILED\n",
- dev->name, bus->nr);
+ pr_warn("i2c bus %d register FAILED\n", bus->nr);
return bus->i2c_rc;
}
@@ -576,8 +576,7 @@ int cx231xx_i2c_mux_register(struct cx231xx *dev, int mux_no)
NULL);
if (!dev->i2c_mux_adap[mux_no])
- pr_warn("%s: i2c mux %d register FAILED\n",
- dev->name, mux_no);
+ pr_warn("i2c mux %d register FAILED\n", mux_no);
return 0;
}
diff --git a/drivers/media/usb/cx231xx/cx231xx-pcb-cfg.c b/drivers/media/usb/cx231xx/cx231xx-pcb-cfg.c
index 4666e533fe0a..2f8dc6afac54 100644
--- a/drivers/media/usb/cx231xx/cx231xx-pcb-cfg.c
+++ b/drivers/media/usb/cx231xx/cx231xx-pcb-cfg.c
@@ -703,9 +703,9 @@ int initialize_cx231xx(struct cx231xx *dev)
_current_scenario_idx = INDEX_BUSPOWER_DIF_ONLY;
break;
default:
- pr_info("bad config in buspower!!!!\n");
- pr_info("config_info=%x\n",
- (config_info & BUSPOWER_MASK));
+ pr_err("bad config in buspower!!!!\n");
+ pr_err("config_info=%x\n",
+ config_info & BUSPOWER_MASK);
return 1;
}
} else { /* self-power */
@@ -768,9 +768,9 @@ int initialize_cx231xx(struct cx231xx *dev)
_current_scenario_idx = INDEX_SELFPOWER_COMPRESSOR;
break;
default:
- pr_info("bad senario!!!!!\n");
- pr_info("config_info=%x\n",
- (config_info & SELFPOWER_MASK));
+ pr_err("bad senario!!!!!\n");
+ pr_err("config_info=%x\n",
+ config_info & SELFPOWER_MASK);
return -ENODEV;
}
}
diff --git a/drivers/media/usb/cx231xx/cx231xx-vbi.c b/drivers/media/usb/cx231xx/cx231xx-vbi.c
index f80126d3525a..14e1eb7f2128 100644
--- a/drivers/media/usb/cx231xx/cx231xx-vbi.c
+++ b/drivers/media/usb/cx231xx/cx231xx-vbi.c
@@ -69,11 +69,10 @@ static inline void print_err_status(struct cx231xx *dev, int packet, int status)
break;
}
if (packet < 0) {
- pr_err("URB status %d [%s].\n", status,
- errmsg);
+ pr_err("URB status %d [%s].\n", status, errmsg);
} else {
pr_err("URB packet %d, status %d [%s].\n",
- packet, status, errmsg);
+ packet, status, errmsg);
}
}
@@ -317,7 +316,7 @@ static void cx231xx_irq_vbi_callback(struct urb *urb)
return;
default: /* error */
pr_err("urb completition error %d.\n",
- urb->status);
+ urb->status);
break;
}
@@ -332,7 +331,7 @@ static void cx231xx_irq_vbi_callback(struct urb *urb)
urb->status = usb_submit_urb(urb, GFP_ATOMIC);
if (urb->status) {
pr_err("urb resubmit failed (error=%i)\n",
- urb->status);
+ urb->status);
}
}
@@ -344,7 +343,7 @@ void cx231xx_uninit_vbi_isoc(struct cx231xx *dev)
struct urb *urb;
int i;
- pr_info("called cx231xx_uninit_vbi_isoc\n");
+ pr_debug("called cx231xx_uninit_vbi_isoc\n");
dev->vbi_mode.bulk_ctl.nfields = -1;
for (i = 0; i < dev->vbi_mode.bulk_ctl.num_bufs; i++) {
@@ -393,7 +392,7 @@ int cx231xx_init_vbi_isoc(struct cx231xx *dev, int max_packets,
struct urb *urb;
int rc;
- pr_info("called cx231xx_vbi_isoc\n");
+ pr_debug("called cx231xx_vbi_isoc\n");
/* De-allocates all pending stuff */
cx231xx_uninit_vbi_isoc(dev);
@@ -451,9 +450,9 @@ int cx231xx_init_vbi_isoc(struct cx231xx *dev, int max_packets,
dev->vbi_mode.bulk_ctl.transfer_buffer[i] =
kzalloc(sb_size, GFP_KERNEL);
if (!dev->vbi_mode.bulk_ctl.transfer_buffer[i]) {
- pr_err("unable to allocate %i bytes for transfer"
- " buffer %i%s\n", sb_size, i,
- in_interrupt() ? " while in int" : "");
+ pr_err("unable to allocate %i bytes for transfer buffer %i%s\n",
+ sb_size, i,
+ in_interrupt() ? " while in int" : "");
cx231xx_uninit_vbi_isoc(dev);
return -ENOMEM;
}
@@ -470,8 +469,7 @@ int cx231xx_init_vbi_isoc(struct cx231xx *dev, int max_packets,
for (i = 0; i < dev->vbi_mode.bulk_ctl.num_bufs; i++) {
rc = usb_submit_urb(dev->vbi_mode.bulk_ctl.urb[i], GFP_ATOMIC);
if (rc) {
- pr_err("submit of urb %i failed (error=%i)\n", i,
- rc);
+ pr_err("submit of urb %i failed (error=%i)\n", i, rc);
cx231xx_uninit_vbi_isoc(dev);
return rc;
}
@@ -522,7 +520,7 @@ static inline void vbi_buffer_filled(struct cx231xx *dev,
struct cx231xx_buffer *buf)
{
/* Advice that buffer was filled */
- /* pr_info("[%p/%d] wakeup\n", buf, buf->vb.i); */
+ /* pr_debug("[%p/%d] wakeup\n", buf, buf->vb.i); */
buf->vb.state = VIDEOBUF_DONE;
buf->vb.field_count++;
diff --git a/drivers/media/usb/cx231xx/cx231xx-video.c b/drivers/media/usb/cx231xx/cx231xx-video.c
index bda5597b5eff..4d1d750ab38d 100644
--- a/drivers/media/usb/cx231xx/cx231xx-video.c
+++ b/drivers/media/usb/cx231xx/cx231xx-video.c
@@ -737,7 +737,7 @@ buffer_prepare(struct videobuf_queue *vq, struct videobuf_buffer *vb,
if (!dev->video_mode.bulk_ctl.num_bufs)
urb_init = 1;
}
- /*pr_info("urb_init=%d dev->video_mode.max_pkt_size=%d\n",
+ /*pr_debug("urb_init=%d dev->video_mode.max_pkt_size=%d\n",
urb_init, dev->video_mode.max_pkt_size);*/
if (urb_init) {
dev->mode_tv = 0;
@@ -809,7 +809,7 @@ void video_mux(struct cx231xx *dev, int index)
cx231xx_set_audio_input(dev, dev->ctl_ainput);
- pr_info("video_mux : %d\n", index);
+ pr_debug("video_mux : %d\n", index);
/* do mode control overrides if required */
cx231xx_do_mode_ctrl_overrides(dev);
@@ -953,12 +953,12 @@ static int vidioc_s_fmt_vid_cap(struct file *file, void *priv,
return -EINVAL;
if (videobuf_queue_is_busy(&fh->vb_vidq)) {
- pr_err("%s queue busy\n", __func__);
+ pr_err("%s: queue busy\n", __func__);
return -EBUSY;
}
if (dev->stream_on && !fh->stream_on) {
- pr_err("%s device in use by another fh\n", __func__);
+ pr_err("%s: device in use by another fh\n", __func__);
return -EBUSY;
}
@@ -1176,9 +1176,8 @@ int cx231xx_s_frequency(struct file *file, void *priv,
int rc;
u32 if_frequency = 5400000;
- pr_info("Enter vidioc_s_frequency()f->frequency=%d;f->type=%d\n",
+ pr_debug("Enter vidioc_s_frequency()f->frequency=%d;f->type=%d\n",
f->frequency, f->type);
- /*pr_info("f->type: 1-radio 2-analogTV 3-digitalTV\n");*/
rc = check_dev(dev);
if (rc < 0)
@@ -1213,13 +1212,13 @@ int cx231xx_s_frequency(struct file *file, void *priv,
else if (dev->norm & V4L2_STD_SECAM_LC)
if_frequency = 1250000; /*1.25MHz */
- pr_info("if_frequency is set to %d\n", if_frequency);
+ pr_debug("if_frequency is set to %d\n", if_frequency);
cx231xx_set_Colibri_For_LowIF(dev, if_frequency, 1, 1);
update_HH_register_after_set_DIF(dev);
}
- pr_info("Set New FREQUENCY to %d\n", f->frequency);
+ pr_debug("Set New FREQUENCY to %d\n", f->frequency);
return rc;
}
@@ -1642,8 +1641,7 @@ static int cx231xx_v4l2_open(struct file *filp)
#if 0
errCode = cx231xx_set_mode(dev, CX231XX_ANALOG_MODE);
if (errCode < 0) {
- pr_err
- ("Device locked on digital mode. Can't open analog\n");
+ pr_err("Device locked on digital mode. Can't open analog\n");
return -EBUSY;
}
#endif
@@ -1737,7 +1735,7 @@ void cx231xx_release_analog_resources(struct cx231xx *dev)
}
if (dev->vbi_dev) {
pr_info("V4L2 device %s deregistered\n",
- video_device_node_name(dev->vbi_dev));
+ video_device_node_name(dev->vbi_dev));
if (video_is_registered(dev->vbi_dev))
video_unregister_device(dev->vbi_dev);
else
@@ -1746,7 +1744,7 @@ void cx231xx_release_analog_resources(struct cx231xx *dev)
}
if (dev->vdev) {
pr_info("V4L2 device %s deregistered\n",
- video_device_node_name(dev->vdev));
+ video_device_node_name(dev->vdev));
if (dev->board.has_417)
cx231xx_417_unregister(dev);
@@ -2080,8 +2078,7 @@ int cx231xx_register_analog_devices(struct cx231xx *dev)
{
int ret;
- pr_info("%s: v4l2 driver version %s\n",
- dev->name, CX231XX_VERSION);
+ pr_info("v4l2 driver version %s\n", CX231XX_VERSION);
/* set default norm */
dev->norm = V4L2_STD_PAL;
@@ -2129,12 +2126,12 @@ int cx231xx_register_analog_devices(struct cx231xx *dev)
video_nr[dev->devno]);
if (ret) {
pr_err("unable to register video device (error=%i).\n",
- ret);
+ ret);
return ret;
}
- pr_info("%s/0: registered device %s [v4l2]\n",
- dev->name, video_device_node_name(dev->vdev));
+ pr_info("Registered video device %s [v4l2]\n",
+ video_device_node_name(dev->vdev));
/* Initialize VBI template */
cx231xx_vbi_template = cx231xx_video_template;
@@ -2156,8 +2153,8 @@ int cx231xx_register_analog_devices(struct cx231xx *dev)
return ret;
}
- pr_info("%s/0: registered device %s\n",
- dev->name, video_device_node_name(dev->vbi_dev));
+ pr_info("Registered VBI device %s\n",
+ video_device_node_name(dev->vbi_dev));
if (cx231xx_boards[dev->model].radio.type == CX231XX_RADIO) {
dev->radio_dev = cx231xx_vdev_init(dev, &cx231xx_radio_template,
@@ -2174,12 +2171,8 @@ int cx231xx_register_analog_devices(struct cx231xx *dev)
return ret;
}
pr_info("Registered radio device as %s\n",
- video_device_node_name(dev->radio_dev));
+ video_device_node_name(dev->radio_dev));
}
- pr_info("V4L2 device registered as %s and %s\n",
- video_device_node_name(dev->vdev),
- video_device_node_name(dev->vbi_dev));
-
return 0;
}
diff --git a/drivers/media/usb/cx231xx/cx231xx.h b/drivers/media/usb/cx231xx/cx231xx.h
index fa27e0c2accb..aeee721a8eef 100644
--- a/drivers/media/usb/cx231xx/cx231xx.h
+++ b/drivers/media/usb/cx231xx/cx231xx.h
@@ -809,7 +809,6 @@ void cx231xx_Setup_AFE_for_LowIF(struct cx231xx *dev);
void reset_s5h1432_demod(struct cx231xx *dev);
void cx231xx_dump_HH_reg(struct cx231xx *dev);
void update_HH_register_after_set_DIF(struct cx231xx *dev);
-void cx231xx_dump_SC_reg(struct cx231xx *dev);
--
1.9.3
^ permalink raw reply related [flat|nested] 18+ messages in thread* [PATCHv2 04/14] [media] cx25840: Don't report an error if max size is adjusted
2014-11-02 12:32 [PATCHv2 00/14] Reduce cx231xx verbosity and do some cleanups Mauro Carvalho Chehab
` (2 preceding siblings ...)
2014-11-02 12:32 ` [PATCHv2 03/14] [media] cx231xx: Cleanup printk at the driver Mauro Carvalho Chehab
@ 2014-11-02 12:32 ` Mauro Carvalho Chehab
2014-11-02 12:32 ` [PATCHv2 05/14] [media] cx25840: convert max_buf_size var to lowercase Mauro Carvalho Chehab
` (10 subsequent siblings)
14 siblings, 0 replies; 18+ messages in thread
From: Mauro Carvalho Chehab @ 2014-11-02 12:32 UTC (permalink / raw)
To: Linux Media Mailing List; +Cc: Mauro Carvalho Chehab, Mauro Carvalho Chehab
There's no reason to report:
cx25840 7-0044: Firmware download size changed to 16 bytes max length
If the driver needs to adjust the buffer's maximum size.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
diff --git a/drivers/media/i2c/cx25840/cx25840-firmware.c b/drivers/media/i2c/cx25840/cx25840-firmware.c
index b3169f94ece8..6092bf71300f 100644
--- a/drivers/media/i2c/cx25840/cx25840-firmware.c
+++ b/drivers/media/i2c/cx25840/cx25840-firmware.c
@@ -122,10 +122,9 @@ int cx25840_loadfw(struct i2c_client *client)
gpio_da = cx25840_read(client, 0x164);
}
- if (is_cx231xx(state) && MAX_BUF_SIZE > 16) {
- v4l_err(client, " Firmware download size changed to 16 bytes max length\n");
- MAX_BUF_SIZE = 16; /* cx231xx cannot accept more than 16 bytes at a time */
- }
+ /* cx231xx cannot accept more than 16 bytes at a time */
+ if (is_cx231xx(state) && MAX_BUF_SIZE > 16)
+ MAX_BUF_SIZE = 16;
if (request_firmware(&fw, fwname, FWDEV(client)) != 0) {
v4l_err(client, "unable to open firmware %s\n", fwname);
--
1.9.3
^ permalink raw reply related [flat|nested] 18+ messages in thread* [PATCHv2 05/14] [media] cx25840: convert max_buf_size var to lowercase
2014-11-02 12:32 [PATCHv2 00/14] Reduce cx231xx verbosity and do some cleanups Mauro Carvalho Chehab
` (3 preceding siblings ...)
2014-11-02 12:32 ` [PATCHv2 04/14] [media] cx25840: Don't report an error if max size is adjusted Mauro Carvalho Chehab
@ 2014-11-02 12:32 ` Mauro Carvalho Chehab
2014-11-02 12:32 ` [PATCHv2 06/14] [media] cx231xx: use 1 byte read for i2c scan Mauro Carvalho Chehab
` (9 subsequent siblings)
14 siblings, 0 replies; 18+ messages in thread
From: Mauro Carvalho Chehab @ 2014-11-02 12:32 UTC (permalink / raw)
To: Linux Media Mailing List; +Cc: Mauro Carvalho Chehab, Mauro Carvalho Chehab
CodingStyle fix: vars should be in lowercase.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
diff --git a/drivers/media/i2c/cx25840/cx25840-firmware.c b/drivers/media/i2c/cx25840/cx25840-firmware.c
index 6092bf71300f..9bbb31adc29d 100644
--- a/drivers/media/i2c/cx25840/cx25840-firmware.c
+++ b/drivers/media/i2c/cx25840/cx25840-firmware.c
@@ -113,7 +113,7 @@ int cx25840_loadfw(struct i2c_client *client)
const u8 *ptr;
const char *fwname = get_fw_name(client);
int size, retval;
- int MAX_BUF_SIZE = FWSEND;
+ int max_buf_size = FWSEND;
u32 gpio_oe = 0, gpio_da = 0;
if (is_cx2388x(state)) {
@@ -123,8 +123,8 @@ int cx25840_loadfw(struct i2c_client *client)
}
/* cx231xx cannot accept more than 16 bytes at a time */
- if (is_cx231xx(state) && MAX_BUF_SIZE > 16)
- MAX_BUF_SIZE = 16;
+ if (is_cx231xx(state) && max_buf_size > 16)
+ max_buf_size = 16;
if (request_firmware(&fw, fwname, FWDEV(client)) != 0) {
v4l_err(client, "unable to open firmware %s\n", fwname);
@@ -139,7 +139,7 @@ int cx25840_loadfw(struct i2c_client *client)
size = fw->size;
ptr = fw->data;
while (size > 0) {
- int len = min(MAX_BUF_SIZE - 2, size);
+ int len = min(max_buf_size - 2, size);
memcpy(buffer + 2, ptr, len);
--
1.9.3
^ permalink raw reply related [flat|nested] 18+ messages in thread* [PATCHv2 06/14] [media] cx231xx: use 1 byte read for i2c scan
2014-11-02 12:32 [PATCHv2 00/14] Reduce cx231xx verbosity and do some cleanups Mauro Carvalho Chehab
` (4 preceding siblings ...)
2014-11-02 12:32 ` [PATCHv2 05/14] [media] cx25840: convert max_buf_size var to lowercase Mauro Carvalho Chehab
@ 2014-11-02 12:32 ` Mauro Carvalho Chehab
2014-11-02 12:32 ` [PATCHv2 07/14] [media] cx231xx: disable I2C errors during i2c_scan Mauro Carvalho Chehab
` (8 subsequent siblings)
14 siblings, 0 replies; 18+ messages in thread
From: Mauro Carvalho Chehab @ 2014-11-02 12:32 UTC (permalink / raw)
To: Linux Media Mailing List
Cc: Matthias Schwarzott, Mauro Carvalho Chehab, Antti Palosaari,
Hans Verkuil, Mauro Carvalho Chehab
From: Matthias Schwarzott <zzam@gentoo.org>
Now cx231xx_i2c_check_for_device works like i2c_check_for_device of em28xx driver.
For me this fixes scanning of all ports but port 2.
Signed-off-by: Matthias Schwarzott <zzam@gentoo.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
diff --git a/drivers/media/usb/cx231xx/cx231xx-i2c.c b/drivers/media/usb/cx231xx/cx231xx-i2c.c
index 1a0d9efeb209..5a0604711be0 100644
--- a/drivers/media/usb/cx231xx/cx231xx-i2c.c
+++ b/drivers/media/usb/cx231xx/cx231xx-i2c.c
@@ -350,14 +350,15 @@ static int cx231xx_i2c_check_for_device(struct i2c_adapter *i2c_adap,
struct cx231xx *dev = bus->dev;
struct cx231xx_i2c_xfer_data req_data;
int status = 0;
+ u8 buf[1];
/* prepare xfer_data struct */
req_data.dev_addr = msg->addr;
- req_data.direction = msg->flags;
+ req_data.direction = I2C_M_RD;
req_data.saddr_len = 0;
req_data.saddr_dat = 0;
- req_data.buf_size = 0;
- req_data.p_buffer = NULL;
+ req_data.buf_size = 1;
+ req_data.p_buffer = buf;
/* usb send command */
status = dev->cx231xx_send_usb_command(bus, &req_data);
--
1.9.3
^ permalink raw reply related [flat|nested] 18+ messages in thread* [PATCHv2 07/14] [media] cx231xx: disable I2C errors during i2c_scan
2014-11-02 12:32 [PATCHv2 00/14] Reduce cx231xx verbosity and do some cleanups Mauro Carvalho Chehab
` (5 preceding siblings ...)
2014-11-02 12:32 ` [PATCHv2 06/14] [media] cx231xx: use 1 byte read for i2c scan Mauro Carvalho Chehab
@ 2014-11-02 12:32 ` Mauro Carvalho Chehab
2014-11-02 12:32 ` [PATCHv2 08/14] [media] cx231xx: convert from pr_foo to dev_foo Mauro Carvalho Chehab
` (7 subsequent siblings)
14 siblings, 0 replies; 18+ messages in thread
From: Mauro Carvalho Chehab @ 2014-11-02 12:32 UTC (permalink / raw)
To: Linux Media Mailing List
Cc: Mauro Carvalho Chehab, Mauro Carvalho Chehab, Matthias Schwarzott,
Antti Palosaari, Hans Verkuil
Otherwise, it would produce lots of useless messages like:
cx231xx: cx231xx_send_usb_command: failed with status --32
After this patch, I2C scan will produce an useful report:
[ 9494.050807] cx231xx: i2c_scan: checking for I2C devices on port=0 ..
[ 9494.074928] cx231xx: i2c scan: Completed Checking for I2C devices on port=0.
[ 9494.074936] cx231xx: i2c_scan: checking for I2C devices on port=3 ..
[ 9494.098934] cx231xx: i2c scan: Completed Checking for I2C devices on port=3.
[ 9494.098942] cx231xx: i2c_scan: checking for I2C devices on port=2 ..
[ 9494.118440] cx231xx: i2c scan: Completed Checking for I2C devices on port=2.
[ 9494.118448] cx231xx: i2c_scan: checking for I2C devices on port=4 ..
[ 9494.141889] cx231xx: i2c scan: Completed Checking for I2C devices on port=4.
[ 9494.060182] cx231xx: i2c scan: found device @ 0x40 [???]
[ 9494.062953] cx231xx: i2c scan: found device @ 0x60 [colibri]
[ 9494.066071] cx231xx: i2c scan: found device @ 0x88 [hammerhead]
[ 9494.067383] cx231xx: i2c scan: found device @ 0x98 [???]
[ 9494.090113] cx231xx: i2c scan: found device @ 0xa0 [eeprom]
[ 9494.106463] cx231xx: i2c scan: found device @ 0x60 [colibri]
[ 9494.113762] cx231xx: i2c scan: found device @ 0xc0 [tuner]
[ 9494.121882] cx231xx: i2c scan: found device @ 0x20 [???]
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
diff --git a/drivers/media/usb/cx231xx/cx231xx-core.c b/drivers/media/usb/cx231xx/cx231xx-core.c
index c5842a1ea104..66e8f8ae9be4 100644
--- a/drivers/media/usb/cx231xx/cx231xx-core.c
+++ b/drivers/media/usb/cx231xx/cx231xx-core.c
@@ -227,7 +227,7 @@ int cx231xx_send_usb_command(struct cx231xx_i2c *i2c_bus,
/* call common vendor command request */
status = cx231xx_send_vendor_cmd(dev, &ven_req);
- if (status < 0) {
+ if (status < 0 && !dev->i2c_scan_running) {
pr_err("%s: failed with status -%d\n",
__func__, status);
}
diff --git a/drivers/media/usb/cx231xx/cx231xx-i2c.c b/drivers/media/usb/cx231xx/cx231xx-i2c.c
index 5a0604711be0..f99857e6c842 100644
--- a/drivers/media/usb/cx231xx/cx231xx-i2c.c
+++ b/drivers/media/usb/cx231xx/cx231xx-i2c.c
@@ -496,6 +496,9 @@ void cx231xx_do_i2c_scan(struct cx231xx *dev, int i2c_port)
if (!i2c_scan)
return;
+ /* Don't generate I2C errors during scan */
+ dev->i2c_scan_running = true;
+
memset(&client, 0, sizeof(client));
client.adapter = cx231xx_get_i2c_adap(dev, i2c_port);
@@ -512,6 +515,8 @@ void cx231xx_do_i2c_scan(struct cx231xx *dev, int i2c_port)
}
pr_info("i2c scan: Completed Checking for I2C devices on port=%d.\n",
i2c_port);
+
+ dev->i2c_scan_running = false;
}
/*
diff --git a/drivers/media/usb/cx231xx/cx231xx.h b/drivers/media/usb/cx231xx/cx231xx.h
index aeee721a8eef..253f2437c0f1 100644
--- a/drivers/media/usb/cx231xx/cx231xx.h
+++ b/drivers/media/usb/cx231xx/cx231xx.h
@@ -610,6 +610,8 @@ struct cx231xx {
unsigned int has_audio_class:1;
unsigned int has_alsa_audio:1;
+ unsigned int i2c_scan_running:1; /* true only during i2c_scan */
+
struct cx231xx_fmt *format;
struct v4l2_device v4l2_dev;
--
1.9.3
^ permalink raw reply related [flat|nested] 18+ messages in thread* [PATCHv2 08/14] [media] cx231xx: convert from pr_foo to dev_foo
2014-11-02 12:32 [PATCHv2 00/14] Reduce cx231xx verbosity and do some cleanups Mauro Carvalho Chehab
` (6 preceding siblings ...)
2014-11-02 12:32 ` [PATCHv2 07/14] [media] cx231xx: disable I2C errors during i2c_scan Mauro Carvalho Chehab
@ 2014-11-02 12:32 ` Mauro Carvalho Chehab
2014-11-02 12:32 ` [PATCHv2 09/14] [media] cx231xx: get rid of audio debug parameter Mauro Carvalho Chehab
` (6 subsequent siblings)
14 siblings, 0 replies; 18+ messages in thread
From: Mauro Carvalho Chehab @ 2014-11-02 12:32 UTC (permalink / raw)
To: Linux Media Mailing List
Cc: Mauro Carvalho Chehab, Mauro Carvalho Chehab, Hans Verkuil,
Laurent Pinchart, Ramakrishnan Muthukrishnan, Prabhakar Lad,
Takashi Iwai, Matthias Schwarzott, Antti Palosaari,
\"David Härdeman\", Sakari Ailus,
Peter Senna Tschudin
Replace all pr_foo occurrences by dev_foo, as this is
the recommended way for drivers.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
diff --git a/drivers/media/usb/cx231xx/cx231xx-417.c b/drivers/media/usb/cx231xx/cx231xx-417.c
index a0d1156d1df1..0773da4dc29b 100644
--- a/drivers/media/usb/cx231xx/cx231xx-417.c
+++ b/drivers/media/usb/cx231xx/cx231xx-417.c
@@ -39,7 +39,6 @@
#include <media/v4l2-event.h>
#include <media/cx2341x.h>
#include <media/tuner.h>
-#include <linux/usb.h>
#define CX231xx_FIRM_IMAGE_SIZE 376836
#define CX231xx_FIRM_IMAGE_NAME "v4l-cx23885-enc.fw"
@@ -988,7 +987,8 @@ static int cx231xx_load_firmware(struct cx231xx *dev)
IVTV_REG_APU, 0);
if (retval != 0) {
- pr_err("%s: Error with mc417_register_write\n", __func__);
+ dev_err(&dev->udev->dev,
+ "%s: Error with mc417_register_write\n", __func__);
return -1;
}
@@ -996,21 +996,25 @@ static int cx231xx_load_firmware(struct cx231xx *dev)
&dev->udev->dev);
if (retval != 0) {
- pr_err("ERROR: Hotplug firmware request failed (%s).\n",
+ dev_err(&dev->udev->dev,
+ "ERROR: Hotplug firmware request failed (%s).\n",
CX231xx_FIRM_IMAGE_NAME);
- pr_err("Please fix your hotplug setup, the board will not work without firmware loaded!\n");
+ dev_err(&dev->udev->dev,
+ "Please fix your hotplug setup, the board will not work without firmware loaded!\n");
return -1;
}
if (firmware->size != CX231xx_FIRM_IMAGE_SIZE) {
- pr_err("ERROR: Firmware size mismatch (have %zd, expected %d)\n",
+ dev_err(&dev->udev->dev,
+ "ERROR: Firmware size mismatch (have %zd, expected %d)\n",
firmware->size, CX231xx_FIRM_IMAGE_SIZE);
release_firmware(firmware);
return -1;
}
if (0 != memcmp(firmware->data, magic, 8)) {
- pr_err("ERROR: Firmware magic mismatch, wrong file?\n");
+ dev_err(&dev->udev->dev,
+ "ERROR: Firmware magic mismatch, wrong file?\n");
release_firmware(firmware);
return -1;
}
@@ -1057,7 +1061,8 @@ static int cx231xx_load_firmware(struct cx231xx *dev)
retval |= mc417_register_write(dev, IVTV_REG_HW_BLOCKS,
IVTV_CMD_HW_BLOCKS_RST);
if (retval < 0) {
- pr_err("%s: Error with mc417_register_write\n",
+ dev_err(&dev->udev->dev,
+ "%s: Error with mc417_register_write\n",
__func__);
return retval;
}
@@ -1069,7 +1074,8 @@ static int cx231xx_load_firmware(struct cx231xx *dev)
retval |= mc417_register_write(dev, IVTV_REG_VPU, value & 0xFFFFFFE8);
if (retval < 0) {
- pr_err("%s: Error with mc417_register_write\n",
+ dev_err(&dev->udev->dev,
+ "%s: Error with mc417_register_write\n",
__func__);
return retval;
}
@@ -1117,25 +1123,28 @@ static int cx231xx_initialize_codec(struct cx231xx *dev)
dprintk(2, "%s: PING OK\n", __func__);
retval = cx231xx_load_firmware(dev);
if (retval < 0) {
- pr_err("%s: f/w load failed\n", __func__);
+ dev_err(&dev->udev->dev,
+ "%s: f/w load failed\n", __func__);
return retval;
}
retval = cx231xx_find_mailbox(dev);
if (retval < 0) {
- pr_err("%s: mailbox < 0, error\n",
+ dev_err(&dev->udev->dev, "%s: mailbox < 0, error\n",
__func__);
return -1;
}
dev->cx23417_mailbox = retval;
retval = cx231xx_api_cmd(dev, CX2341X_ENC_PING_FW, 0, 0);
if (retval < 0) {
- pr_err("ERROR: cx23417 firmware ping failed!\n");
+ dev_err(&dev->udev->dev,
+ "ERROR: cx23417 firmware ping failed!\n");
return -1;
}
retval = cx231xx_api_cmd(dev, CX2341X_ENC_GET_VERSION, 0, 1,
&version);
if (retval < 0) {
- pr_err("ERROR: cx23417 firmware get encoder: version failed!\n");
+ dev_err(&dev->udev->dev,
+ "ERROR: cx23417 firmware get encoder: version failed!\n");
return -1;
}
dprintk(1, "cx23417 firmware version is 0x%08x\n", version);
@@ -1416,8 +1425,9 @@ static int bb_buf_prepare(struct videobuf_queue *q,
if (!dev->video_mode.bulk_ctl.num_bufs)
urb_init = 1;
}
- /*pr_info("urb_init=%d dev->video_mode.max_pkt_size=%d\n",
- urb_init, dev->video_mode.max_pkt_size);*/
+ dev_dbg(&dev->udev->dev,
+ "urb_init=%d dev->video_mode.max_pkt_size=%d\n",
+ urb_init, dev->video_mode.max_pkt_size);
dev->mode_tv = 1;
if (urb_init) {
diff --git a/drivers/media/usb/cx231xx/cx231xx-audio.c b/drivers/media/usb/cx231xx/cx231xx-audio.c
index e96703180c0c..1c3f68179fc9 100644
--- a/drivers/media/usb/cx231xx/cx231xx-audio.c
+++ b/drivers/media/usb/cx231xx/cx231xx-audio.c
@@ -22,7 +22,6 @@
#include "cx231xx.h"
#include <linux/kernel.h>
-#include <linux/usb.h>
#include <linux/init.h>
#include <linux/sound.h>
#include <linux/spinlock.h>
@@ -182,8 +181,9 @@ static void cx231xx_audio_isocirq(struct urb *urb)
status = usb_submit_urb(urb, GFP_ATOMIC);
if (status < 0) {
- pr_err("resubmit of audio urb failed (error=%i)\n",
- status);
+ dev_err(&dev->udev->dev,
+ "resubmit of audio urb failed (error=%i)\n",
+ status);
}
return;
}
@@ -266,8 +266,9 @@ static void cx231xx_audio_bulkirq(struct urb *urb)
status = usb_submit_urb(urb, GFP_ATOMIC);
if (status < 0) {
- pr_err("resubmit of audio urb failed (error=%i)\n",
- status);
+ dev_err(&dev->udev->dev,
+ "resubmit of audio urb failed (error=%i)\n",
+ status);
}
return;
}
@@ -277,7 +278,8 @@ static int cx231xx_init_audio_isoc(struct cx231xx *dev)
int i, errCode;
int sb_size;
- pr_debug("%s: Starting ISO AUDIO transfers\n", __func__);
+ dev_dbg(&dev->udev->dev,
+ "%s: Starting ISO AUDIO transfers\n", __func__);
if (dev->state & DEV_DISCONNECTED)
return -ENODEV;
@@ -295,7 +297,7 @@ static int cx231xx_init_audio_isoc(struct cx231xx *dev)
memset(dev->adev.transfer_buffer[i], 0x80, sb_size);
urb = usb_alloc_urb(CX231XX_ISO_NUM_AUDIO_PACKETS, GFP_ATOMIC);
if (!urb) {
- pr_err("usb_alloc_urb failed!\n");
+ dev_err(&dev->udev->dev, "usb_alloc_urb failed!\n");
for (j = 0; j < i; j++) {
usb_free_urb(dev->adev.urb[j]);
kfree(dev->adev.transfer_buffer[j]);
@@ -338,7 +340,8 @@ static int cx231xx_init_audio_bulk(struct cx231xx *dev)
int i, errCode;
int sb_size;
- pr_debug("%s: Starting BULK AUDIO transfers\n", __func__);
+ dev_dbg(&dev->udev->dev,
+ "%s: Starting BULK AUDIO transfers\n", __func__);
if (dev->state & DEV_DISCONNECTED)
return -ENODEV;
@@ -356,7 +359,7 @@ static int cx231xx_init_audio_bulk(struct cx231xx *dev)
memset(dev->adev.transfer_buffer[i], 0x80, sb_size);
urb = usb_alloc_urb(CX231XX_NUM_AUDIO_PACKETS, GFP_ATOMIC);
if (!urb) {
- pr_err("usb_alloc_urb failed!\n");
+ dev_err(&dev->udev->dev, "usb_alloc_urb failed!\n");
for (j = 0; j < i; j++) {
usb_free_urb(dev->adev.urb[j]);
kfree(dev->adev.transfer_buffer[j]);
@@ -439,12 +442,14 @@ static int snd_cx231xx_capture_open(struct snd_pcm_substream *substream)
dprintk("opening device and trying to acquire exclusive lock\n");
if (!dev) {
- pr_err("BUG: cx231xx can't find device struct. Can't proceed with open\n");
+ dev_err(&dev->udev->dev,
+ "BUG: cx231xx can't find device struct. Can't proceed with open\n");
return -ENODEV;
}
if (dev->state & DEV_DISCONNECTED) {
- pr_err("Can't open. the device was removed.\n");
+ dev_err(&dev->udev->dev,
+ "Can't open. the device was removed.\n");
return -ENODEV;
}
@@ -457,7 +462,8 @@ static int snd_cx231xx_capture_open(struct snd_pcm_substream *substream)
ret = cx231xx_set_alt_setting(dev, INDEX_AUDIO, 0);
mutex_unlock(&dev->lock);
if (ret < 0) {
- pr_err("failed to set alternate setting !\n");
+ dev_err(&dev->udev->dev,
+ "failed to set alternate setting !\n");
return ret;
}
@@ -493,7 +499,8 @@ static int snd_cx231xx_pcm_close(struct snd_pcm_substream *substream)
/* 1 - 48000 samples per sec */
ret = cx231xx_set_alt_setting(dev, INDEX_AUDIO, 0);
if (ret < 0) {
- pr_err("failed to set alternate setting !\n");
+ dev_err(&dev->udev->dev,
+ "failed to set alternate setting !\n");
mutex_unlock(&dev->lock);
return ret;
@@ -661,7 +668,8 @@ static int cx231xx_audio_init(struct cx231xx *dev)
return 0;
}
- pr_debug("probing for cx231xx non standard usbaudio\n");
+ dev_dbg(&dev->udev->dev,
+ "probing for cx231xx non standard usbaudio\n");
err = snd_card_new(&dev->udev->dev, index[devnr], "Cx231xx Audio",
THIS_MODULE, 0, &card);
@@ -705,7 +713,8 @@ static int cx231xx_audio_init(struct cx231xx *dev)
bEndpointAddress;
adev->num_alt = uif->num_altsetting;
- pr_info("audio EndPoint Addr 0x%x, Alternate settings: %i\n",
+ dev_info(&dev->udev->dev,
+ "audio EndPoint Addr 0x%x, Alternate settings: %i\n",
adev->end_point_addr, adev->num_alt);
adev->alt_max_pkt_size = kmalloc(32 * adev->num_alt, GFP_KERNEL);
@@ -718,8 +727,9 @@ static int cx231xx_audio_init(struct cx231xx *dev)
wMaxPacketSize);
adev->alt_max_pkt_size[i] =
(tmp & 0x07ff) * (((tmp & 0x1800) >> 11) + 1);
- pr_debug("audio alternate setting %i, max size= %i\n", i,
- adev->alt_max_pkt_size[i]);
+ dev_dbg(&dev->udev->dev,
+ "audio alternate setting %i, max size= %i\n", i,
+ adev->alt_max_pkt_size[i]);
}
return 0;
diff --git a/drivers/media/usb/cx231xx/cx231xx-avcore.c b/drivers/media/usb/cx231xx/cx231xx-avcore.c
index 62c63b9e2291..9088a32db2d1 100644
--- a/drivers/media/usb/cx231xx/cx231xx-avcore.c
+++ b/drivers/media/usb/cx231xx/cx231xx-avcore.c
@@ -28,7 +28,6 @@
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/bitmap.h>
-#include <linux/usb.h>
#include <linux/i2c.h>
#include <linux/mm.h>
#include <linux/mutex.h>
@@ -83,10 +82,10 @@ void initGPIO(struct cx231xx *dev)
cx231xx_send_gpio_cmd(dev, _gpio_direction, (u8 *)&value, 4, 0, 0);
verve_read_byte(dev, 0x07, &val);
- pr_debug("verve_read_byte address0x07=0x%x\n", val);
+ dev_dbg(&dev->udev->dev, "verve_read_byte address0x07=0x%x\n", val);
verve_write_byte(dev, 0x07, 0xF4);
verve_read_byte(dev, 0x07, &val);
- pr_debug("verve_read_byte address0x07=0x%x\n", val);
+ dev_dbg(&dev->udev->dev, "verve_read_byte address0x07=0x%x\n", val);
cx231xx_capture_start(dev, 1, Vbi);
@@ -156,7 +155,8 @@ int cx231xx_afe_init_super_block(struct cx231xx *dev, u32 ref_count)
while (afe_power_status != 0x18) {
status = afe_write_byte(dev, SUP_BLK_PWRDN, 0x18);
if (status < 0) {
- pr_debug("%s: Init Super Block failed in send cmd\n",
+ dev_dbg(&dev->udev->dev,
+ "%s: Init Super Block failed in send cmd\n",
__func__);
break;
}
@@ -164,13 +164,15 @@ int cx231xx_afe_init_super_block(struct cx231xx *dev, u32 ref_count)
status = afe_read_byte(dev, SUP_BLK_PWRDN, &afe_power_status);
afe_power_status &= 0xff;
if (status < 0) {
- pr_debug("%s: Init Super Block failed in receive cmd\n",
+ dev_dbg(&dev->udev->dev,
+ "%s: Init Super Block failed in receive cmd\n",
__func__);
break;
}
i++;
if (i == 10) {
- pr_debug("%s: Init Super Block force break in loop !!!!\n",
+ dev_dbg(&dev->udev->dev,
+ "%s: Init Super Block force break in loop !!!!\n",
__func__);
status = -1;
break;
@@ -410,7 +412,7 @@ int cx231xx_afe_update_power_control(struct cx231xx *dev,
status |= afe_write_byte(dev, ADC_PWRDN_CLAMP_CH3,
0x00);
} else {
- pr_debug("Invalid AV mode input\n");
+ dev_dbg(&dev->udev->dev, "Invalid AV mode input\n");
status = -1;
}
break;
@@ -467,7 +469,7 @@ int cx231xx_afe_update_power_control(struct cx231xx *dev,
status |= afe_write_byte(dev, ADC_PWRDN_CLAMP_CH3,
0x40);
} else {
- pr_debug("Invalid AV mode input\n");
+ dev_dbg(&dev->udev->dev, "Invalid AV mode input\n");
status = -1;
}
} /* switch */
@@ -573,9 +575,9 @@ int cx231xx_set_video_input_mux(struct cx231xx *dev, u8 input)
status = cx231xx_set_power_mode(dev,
POLARIS_AVMODE_ENXTERNAL_AV);
if (status < 0) {
- pr_err("%s: set_power_mode : Failed to"
- " set Power - errCode [%d]!\n",
- __func__, status);
+ dev_err(&dev->udev->dev,
+ "%s: Failed to set Power - errCode [%d]!\n",
+ __func__, status);
return status;
}
}
@@ -591,8 +593,8 @@ int cx231xx_set_video_input_mux(struct cx231xx *dev, u8 input)
status = cx231xx_set_power_mode(dev,
POLARIS_AVMODE_ANALOGT_TV);
if (status < 0) {
- pr_err("%s: set_power_mode:Failed"
- " to set Power - errCode [%d]!\n",
+ dev_err(&dev->udev->dev,
+ "%s: Failed to set Power - errCode [%d]!\n",
__func__, status);
return status;
}
@@ -608,8 +610,8 @@ int cx231xx_set_video_input_mux(struct cx231xx *dev, u8 input)
break;
default:
- pr_err("%s: set_power_mode : Unknown Input %d !\n",
- __func__, INPUT(input)->type);
+ dev_err(&dev->udev->dev, "%s: Unknown Input %d !\n",
+ __func__, INPUT(input)->type);
break;
}
@@ -628,7 +630,8 @@ int cx231xx_set_decoder_video_input(struct cx231xx *dev,
if (pin_type != dev->video_input) {
status = cx231xx_afe_adjust_ref_count(dev, pin_type);
if (status < 0) {
- pr_err("%s: adjust_ref_count :Failed to set AFE input mux - errCode [%d]!\n",
+ dev_err(&dev->udev->dev,
+ "%s: adjust_ref_count :Failed to set AFE input mux - errCode [%d]!\n",
__func__, status);
return status;
}
@@ -637,7 +640,8 @@ int cx231xx_set_decoder_video_input(struct cx231xx *dev,
/* call afe block to set video inputs */
status = cx231xx_afe_set_input_mux(dev, input);
if (status < 0) {
- pr_err("%s: set_input_mux :Failed to set AFE input mux - errCode [%d]!\n",
+ dev_err(&dev->udev->dev,
+ "%s: set_input_mux :Failed to set AFE input mux - errCode [%d]!\n",
__func__, status);
return status;
}
@@ -668,7 +672,8 @@ int cx231xx_set_decoder_video_input(struct cx231xx *dev,
/* Tell DIF object to go to baseband mode */
status = cx231xx_dif_set_standard(dev, DIF_USE_BASEBAND);
if (status < 0) {
- pr_err("%s: cx231xx_dif set to By pass mode- errCode [%d]!\n",
+ dev_err(&dev->udev->dev,
+ "%s: cx231xx_dif set to By pass mode- errCode [%d]!\n",
__func__, status);
return status;
}
@@ -712,7 +717,8 @@ int cx231xx_set_decoder_video_input(struct cx231xx *dev,
/* Tell DIF object to go to baseband mode */
status = cx231xx_dif_set_standard(dev, DIF_USE_BASEBAND);
if (status < 0) {
- pr_err("%s: cx231xx_dif set to By pass mode- errCode [%d]!\n",
+ dev_err(&dev->udev->dev,
+ "%s: cx231xx_dif set to By pass mode- errCode [%d]!\n",
__func__, status);
return status;
}
@@ -786,7 +792,8 @@ int cx231xx_set_decoder_video_input(struct cx231xx *dev,
status = cx231xx_dif_set_standard(dev,
DIF_USE_BASEBAND);
if (status < 0) {
- pr_err("%s: cx231xx_dif set to By pass mode- errCode [%d]!\n",
+ dev_err(&dev->udev->dev,
+ "%s: cx231xx_dif set to By pass mode- errCode [%d]!\n",
__func__, status);
return status;
}
@@ -821,7 +828,8 @@ int cx231xx_set_decoder_video_input(struct cx231xx *dev,
/* Reinitialize the DIF */
status = cx231xx_dif_set_standard(dev, dev->norm);
if (status < 0) {
- pr_err("%s: cx231xx_dif set to By pass mode- errCode [%d]!\n",
+ dev_err(&dev->udev->dev,
+ "%s: cx231xx_dif set to By pass mode- errCode [%d]!\n",
__func__, status);
return status;
}
@@ -964,14 +972,14 @@ int cx231xx_do_mode_ctrl_overrides(struct cx231xx *dev)
{
int status = 0;
- pr_debug("%s: 0x%x\n",
+ dev_dbg(&dev->udev->dev, "%s: 0x%x\n",
__func__, (unsigned int)dev->norm);
/* Change the DFE_CTRL3 bp_percent to fix flagging */
status = vid_blk_write_word(dev, DFE_CTRL3, 0xCD3F0280);
if (dev->norm & (V4L2_STD_NTSC | V4L2_STD_PAL_M)) {
- pr_debug("%s: NTSC\n", __func__);
+ dev_dbg(&dev->udev->dev, "%s: NTSC\n", __func__);
/* Move the close caption lines out of active video,
adjust the active video start point */
@@ -998,7 +1006,7 @@ int cx231xx_do_mode_ctrl_overrides(struct cx231xx *dev)
(FLD_HBLANK_CNT, 0x79));
} else if (dev->norm & V4L2_STD_SECAM) {
- pr_debug("%s: SECAM\n", __func__);
+ dev_dbg(&dev->udev->dev, "%s: SECAM\n", __func__);
status = cx231xx_read_modify_write_i2c_dword(dev,
VID_BLK_I2C_ADDRESS,
VERT_TIM_CTRL,
@@ -1025,7 +1033,7 @@ int cx231xx_do_mode_ctrl_overrides(struct cx231xx *dev)
cx231xx_set_field
(FLD_HBLANK_CNT, 0x85));
} else {
- pr_debug("%s: PAL\n", __func__);
+ dev_dbg(&dev->udev->dev, "%s: PAL\n", __func__);
status = cx231xx_read_modify_write_i2c_dword(dev,
VID_BLK_I2C_ADDRESS,
VERT_TIM_CTRL,
@@ -1325,111 +1333,129 @@ void cx231xx_dump_HH_reg(struct cx231xx *dev)
for (i = 0x100; i < 0x140; i++) {
vid_blk_read_word(dev, i, &value);
- pr_debug("reg0x%x=0x%x\n", i, value);
+ dev_dbg(&dev->udev->dev, "reg0x%x=0x%x\n", i, value);
i = i+3;
}
for (i = 0x300; i < 0x400; i++) {
vid_blk_read_word(dev, i, &value);
- pr_debug("reg0x%x=0x%x\n", i, value);
+ dev_dbg(&dev->udev->dev, "reg0x%x=0x%x\n", i, value);
i = i+3;
}
for (i = 0x400; i < 0x440; i++) {
vid_blk_read_word(dev, i, &value);
- pr_debug("reg0x%x=0x%x\n", i, value);
+ dev_dbg(&dev->udev->dev, "reg0x%x=0x%x\n", i, value);
i = i+3;
}
vid_blk_read_word(dev, AFE_CTRL_C2HH_SRC_CTRL, &value);
- pr_debug("AFE_CTRL_C2HH_SRC_CTRL=0x%x\n", value);
+ dev_dbg(&dev->udev->dev, "AFE_CTRL_C2HH_SRC_CTRL=0x%x\n", value);
vid_blk_write_word(dev, AFE_CTRL_C2HH_SRC_CTRL, 0x4485D390);
vid_blk_read_word(dev, AFE_CTRL_C2HH_SRC_CTRL, &value);
- pr_debug("AFE_CTRL_C2HH_SRC_CTRL=0x%x\n", value);
+ dev_dbg(&dev->udev->dev, "AFE_CTRL_C2HH_SRC_CTRL=0x%x\n", value);
}
#if 0
static void cx231xx_dump_SC_reg(struct cx231xx *dev)
{
u8 value[4] = { 0, 0, 0, 0 };
- pr_debug("%s!\n", __func__);
+ dev_dbg(&dev->udev->dev, "%s!\n", __func__);
cx231xx_read_ctrl_reg(dev, VRT_GET_REGISTER, BOARD_CFG_STAT,
value, 4);
- pr_debug("reg0x%x=0x%x 0x%x 0x%x 0x%x\n", BOARD_CFG_STAT, value[0],
- value[1], value[2], value[3]);
+ dev_dbg(&dev->udev->dev,
+ "reg0x%x=0x%x 0x%x 0x%x 0x%x\n", BOARD_CFG_STAT, value[0],
+ value[1], value[2], value[3]);
cx231xx_read_ctrl_reg(dev, VRT_GET_REGISTER, TS_MODE_REG,
value, 4);
- pr_debug("reg0x%x=0x%x 0x%x 0x%x 0x%x\n", TS_MODE_REG, value[0],
- value[1], value[2], value[3]);
+ dev_dbg(&dev->udev->dev,
+ "reg0x%x=0x%x 0x%x 0x%x 0x%x\n", TS_MODE_REG, value[0],
+ value[1], value[2], value[3]);
cx231xx_read_ctrl_reg(dev, VRT_GET_REGISTER, TS1_CFG_REG,
value, 4);
- pr_debug("reg0x%x=0x%x 0x%x 0x%x 0x%x\n", TS1_CFG_REG, value[0],
- value[1], value[2], value[3]);
+ dev_dbg(&dev->udev->dev,
+ "reg0x%x=0x%x 0x%x 0x%x 0x%x\n", TS1_CFG_REG, value[0],
+ value[1], value[2], value[3]);
cx231xx_read_ctrl_reg(dev, VRT_GET_REGISTER, TS1_LENGTH_REG,
value, 4);
- pr_debug("reg0x%x=0x%x 0x%x 0x%x 0x%x\n", TS1_LENGTH_REG, value[0],
- value[1], value[2], value[3]);
+ dev_dbg(&dev->udev->dev,
+ "reg0x%x=0x%x 0x%x 0x%x 0x%x\n", TS1_LENGTH_REG, value[0],
+ value[1], value[2], value[3]);
cx231xx_read_ctrl_reg(dev, VRT_GET_REGISTER, TS2_CFG_REG,
value, 4);
- pr_debug("reg0x%x=0x%x 0x%x 0x%x 0x%x\n", TS2_CFG_REG, value[0],
- value[1], value[2], value[3]);
+ dev_dbg(&dev->udev->dev,
+ "reg0x%x=0x%x 0x%x 0x%x 0x%x\n", TS2_CFG_REG, value[0],
+ value[1], value[2], value[3]);
cx231xx_read_ctrl_reg(dev, VRT_GET_REGISTER, TS2_LENGTH_REG,
value, 4);
- pr_debug("reg0x%x=0x%x 0x%x 0x%x 0x%x\n", TS2_LENGTH_REG, value[0],
- value[1], value[2], value[3]);
+ dev_dbg(&dev->udev->dev,
+ "reg0x%x=0x%x 0x%x 0x%x 0x%x\n", TS2_LENGTH_REG, value[0],
+ value[1], value[2], value[3]);
cx231xx_read_ctrl_reg(dev, VRT_GET_REGISTER, EP_MODE_SET,
value, 4);
- pr_debug("reg0x%x=0x%x 0x%x 0x%x 0x%x\n", EP_MODE_SET, value[0],
- value[1], value[2], value[3]);
+ dev_dbg(&dev->udev->dev,
+ "reg0x%x=0x%x 0x%x 0x%x 0x%x\n", EP_MODE_SET, value[0],
+ value[1], value[2], value[3]);
cx231xx_read_ctrl_reg(dev, VRT_GET_REGISTER, CIR_PWR_PTN1,
value, 4);
- pr_debug("reg0x%x=0x%x 0x%x 0x%x 0x%x\n", CIR_PWR_PTN1, value[0],
- value[1], value[2], value[3]);
+ dev_dbg(&dev->udev->dev,
+ "reg0x%x=0x%x 0x%x 0x%x 0x%x\n", CIR_PWR_PTN1, value[0],
+ value[1], value[2], value[3]);
cx231xx_read_ctrl_reg(dev, VRT_GET_REGISTER, CIR_PWR_PTN2,
value, 4);
- pr_debug("reg0x%x=0x%x 0x%x 0x%x 0x%x\n", CIR_PWR_PTN2, value[0],
- value[1], value[2], value[3]);
+ dev_dbg(&dev->udev->dev,
+ "reg0x%x=0x%x 0x%x 0x%x 0x%x\n", CIR_PWR_PTN2, value[0],
+ value[1], value[2], value[3]);
cx231xx_read_ctrl_reg(dev, VRT_GET_REGISTER, CIR_PWR_PTN3,
value, 4);
- pr_debug("reg0x%x=0x%x 0x%x 0x%x 0x%x\n", CIR_PWR_PTN3, value[0],
- value[1], value[2], value[3]);
+ dev_dbg(&dev->udev->dev,
+ "reg0x%x=0x%x 0x%x 0x%x 0x%x\n", CIR_PWR_PTN3, value[0],
+ value[1], value[2], value[3]);
cx231xx_read_ctrl_reg(dev, VRT_GET_REGISTER, CIR_PWR_MASK0,
value, 4);
- pr_debug("reg0x%x=0x%x 0x%x 0x%x 0x%x\n", CIR_PWR_MASK0, value[0],
- value[1], value[2], value[3]);
+ dev_dbg(&dev->udev->dev,
+ "reg0x%x=0x%x 0x%x 0x%x 0x%x\n", CIR_PWR_MASK0, value[0],
+ value[1], value[2], value[3]);
cx231xx_read_ctrl_reg(dev, VRT_GET_REGISTER, CIR_PWR_MASK1,
value, 4);
- pr_debug("reg0x%x=0x%x 0x%x 0x%x 0x%x\n", CIR_PWR_MASK1, value[0],
- value[1], value[2], value[3]);
+ dev_dbg(&dev->udev->dev,
+ "reg0x%x=0x%x 0x%x 0x%x 0x%x\n", CIR_PWR_MASK1, value[0],
+ value[1], value[2], value[3]);
cx231xx_read_ctrl_reg(dev, VRT_GET_REGISTER, CIR_PWR_MASK2,
value, 4);
- pr_debug("reg0x%x=0x%x 0x%x 0x%x 0x%x\n", CIR_PWR_MASK2, value[0],
- value[1], value[2], value[3]);
+ dev_dbg(&dev->udev->dev,
+ "reg0x%x=0x%x 0x%x 0x%x 0x%x\n", CIR_PWR_MASK2, value[0],
+ value[1], value[2], value[3]);
cx231xx_read_ctrl_reg(dev, VRT_GET_REGISTER, CIR_GAIN,
value, 4);
- pr_debug("reg0x%x=0x%x 0x%x 0x%x 0x%x\n", CIR_GAIN, value[0],
- value[1], value[2], value[3]);
+ dev_dbg(&dev->udev->dev,
+ "reg0x%x=0x%x 0x%x 0x%x 0x%x\n", CIR_GAIN, value[0],
+ value[1], value[2], value[3]);
cx231xx_read_ctrl_reg(dev, VRT_GET_REGISTER, CIR_CAR_REG,
value, 4);
- pr_debug("reg0x%x=0x%x 0x%x 0x%x 0x%x\n", CIR_CAR_REG, value[0],
- value[1], value[2], value[3]);
+ dev_dbg(&dev->udev->dev,
+ "reg0x%x=0x%x 0x%x 0x%x 0x%x\n", CIR_CAR_REG, value[0],
+ value[1], value[2], value[3]);
cx231xx_read_ctrl_reg(dev, VRT_GET_REGISTER, CIR_OT_CFG1,
value, 4);
- pr_debug("reg0x%x=0x%x 0x%x 0x%x 0x%x\n", CIR_OT_CFG1, value[0],
- value[1], value[2], value[3]);
+ dev_dbg(&dev->udev->dev,
+ "reg0x%x=0x%x 0x%x 0x%x 0x%x\n", CIR_OT_CFG1, value[0],
+ value[1], value[2], value[3]);
cx231xx_read_ctrl_reg(dev, VRT_GET_REGISTER, CIR_OT_CFG2,
value, 4);
- pr_debug("reg0x%x=0x%x 0x%x 0x%x 0x%x\n", CIR_OT_CFG2, value[0],
- value[1], value[2], value[3]);
+ dev_dbg(&dev->udev->dev,
+ "reg0x%x=0x%x 0x%x 0x%x 0x%x\n", CIR_OT_CFG2, value[0],
+ value[1], value[2], value[3]);
cx231xx_read_ctrl_reg(dev, VRT_GET_REGISTER, PWR_CTL_EN,
value, 4);
- pr_debug("reg0x%x=0x%x 0x%x 0x%x 0x%x\n", PWR_CTL_EN, value[0],
- value[1], value[2], value[3]);
+ dev_dbg(&dev->udev->dev,
+ "reg0x%x=0x%x 0x%x 0x%x 0x%x\n", PWR_CTL_EN, value[0],
+ value[1], value[2], value[3]);
}
#endif
@@ -1497,7 +1523,7 @@ void cx231xx_set_Colibri_For_LowIF(struct cx231xx *dev, u32 if_freq,
u32 standard = 0;
u8 value[4] = { 0, 0, 0, 0 };
- pr_debug("Enter cx231xx_set_Colibri_For_LowIF()\n");
+ dev_dbg(&dev->udev->dev, "Enter cx231xx_set_Colibri_For_LowIF()\n");
value[0] = (u8) 0x6F;
value[1] = (u8) 0x6F;
value[2] = (u8) 0x6F;
@@ -1517,7 +1543,7 @@ void cx231xx_set_Colibri_For_LowIF(struct cx231xx *dev, u32 if_freq,
colibri_carrier_offset = cx231xx_Get_Colibri_CarrierOffset(mode,
standard);
- pr_debug("colibri_carrier_offset=%d, standard=0x%x\n",
+ dev_dbg(&dev->udev->dev, "colibri_carrier_offset=%d, standard=0x%x\n",
colibri_carrier_offset, standard);
/* Set the band Pass filter for DIF*/
@@ -1551,8 +1577,8 @@ void cx231xx_set_DIF_bandpass(struct cx231xx *dev, u32 if_freq,
u64 pll_freq_u64 = 0;
u32 i = 0;
- pr_debug("if_freq=%d;spectral_invert=0x%x;mode=0x%x\n",
- if_freq, spectral_invert, mode);
+ dev_dbg(&dev->udev->dev, "if_freq=%d;spectral_invert=0x%x;mode=0x%x\n",
+ if_freq, spectral_invert, mode);
if (mode == TUNER_MODE_FM_RADIO) {
@@ -1595,8 +1621,7 @@ void cx231xx_set_DIF_bandpass(struct cx231xx *dev, u32 if_freq,
if_freq = 16000000;
}
- pr_debug("Enter IF=%zu\n",
- ARRAY_SIZE(Dif_set_array));
+ dev_dbg(&dev->udev->dev, "Enter IF=%zu\n", ARRAY_SIZE(Dif_set_array));
for (i = 0; i < ARRAY_SIZE(Dif_set_array); i++) {
if (Dif_set_array[i].if_freq == if_freq) {
vid_blk_write_word(dev,
@@ -1708,7 +1733,7 @@ int cx231xx_dif_set_standard(struct cx231xx *dev, u32 standard)
u32 dif_misc_ctrl_value = 0;
u32 func_mode = 0;
- pr_debug("%s: setStandard to %x\n", __func__, standard);
+ dev_dbg(&dev->udev->dev, "%s: setStandard to %x\n", __func__, standard);
status = vid_blk_read_word(dev, DIF_MISC_CTRL, &dif_misc_ctrl_value);
if (standard != DIF_USE_BASEBAND)
@@ -2111,8 +2136,8 @@ int cx231xx_tuner_post_channel_change(struct cx231xx *dev)
{
int status = 0;
u32 dwval;
- pr_debug("%s: dev->tuner_type =0%d\n",
- __func__, dev->tuner_type);
+ dev_dbg(&dev->udev->dev, "%s: dev->tuner_type =0%d\n",
+ __func__, dev->tuner_type);
/* Set the RF and IF k_agc values to 4 for PAL/NTSC and 8 for
* SECAM L/B/D standards */
status = vid_blk_read_word(dev, DIF_AGC_IF_REF, &dwval);
@@ -2213,7 +2238,7 @@ int cx231xx_set_power_mode(struct cx231xx *dev, enum AV_MODE mode)
if (dev->power_mode != mode)
dev->power_mode = mode;
else {
- pr_debug("%s: mode = %d, No Change req.\n",
+ dev_dbg(&dev->udev->dev, "%s: mode = %d, No Change req.\n",
__func__, mode);
return 0;
}
@@ -2453,7 +2478,7 @@ int cx231xx_start_stream(struct cx231xx *dev, u32 ep_mask)
u32 tmp = 0;
int status = 0;
- pr_debug("%s: ep_mask = %x\n", __func__, ep_mask);
+ dev_dbg(&dev->udev->dev, "%s: ep_mask = %x\n", __func__, ep_mask);
status = cx231xx_read_ctrl_reg(dev, VRT_GET_REGISTER, EP_MODE_SET,
value, 4);
if (status < 0)
@@ -2478,7 +2503,7 @@ int cx231xx_stop_stream(struct cx231xx *dev, u32 ep_mask)
u32 tmp = 0;
int status = 0;
- pr_debug("%s: ep_mask = %x\n", __func__, ep_mask);
+ dev_dbg(&dev->udev->dev, "%s: ep_mask = %x\n", __func__, ep_mask);
status =
cx231xx_read_ctrl_reg(dev, VRT_GET_REGISTER, EP_MODE_SET, value, 4);
if (status < 0)
@@ -2506,32 +2531,38 @@ int cx231xx_initialize_stream_xfer(struct cx231xx *dev, u32 media_type)
if (dev->udev->speed == USB_SPEED_HIGH) {
switch (media_type) {
case Audio:
- pr_debug("%s: Audio enter HANC\n", __func__);
+ dev_dbg(&dev->udev->dev,
+ "%s: Audio enter HANC\n", __func__);
status =
cx231xx_mode_register(dev, TS_MODE_REG, 0x9300);
break;
case Vbi:
- pr_debug("%s: set vanc registers\n", __func__);
+ dev_dbg(&dev->udev->dev,
+ "%s: set vanc registers\n", __func__);
status = cx231xx_mode_register(dev, TS_MODE_REG, 0x300);
break;
case Sliced_cc:
- pr_debug("%s: set hanc registers\n", __func__);
+ dev_dbg(&dev->udev->dev,
+ "%s: set hanc registers\n", __func__);
status =
cx231xx_mode_register(dev, TS_MODE_REG, 0x1300);
break;
case Raw_Video:
- pr_debug("%s: set video registers\n", __func__);
+ dev_dbg(&dev->udev->dev,
+ "%s: set video registers\n", __func__);
status = cx231xx_mode_register(dev, TS_MODE_REG, 0x100);
break;
case TS1_serial_mode:
- pr_debug("%s: set ts1 registers", __func__);
+ dev_dbg(&dev->udev->dev,
+ "%s: set ts1 registers", __func__);
if (dev->board.has_417) {
- pr_debug("%s: MPEG\n", __func__);
+ dev_dbg(&dev->udev->dev,
+ "%s: MPEG\n", __func__);
value &= 0xFFFFFFFC;
value |= 0x3;
@@ -2554,7 +2585,7 @@ int cx231xx_initialize_stream_xfer(struct cx231xx *dev, u32 media_type)
VRT_SET_REGISTER,
TS1_LENGTH_REG, val, 4);
} else {
- pr_debug("%s: BDA\n", __func__);
+ dev_dbg(&dev->udev->dev, "%s: BDA\n", __func__);
status = cx231xx_mode_register(dev,
TS_MODE_REG, 0x101);
status = cx231xx_mode_register(dev,
@@ -2563,8 +2594,9 @@ int cx231xx_initialize_stream_xfer(struct cx231xx *dev, u32 media_type)
break;
case TS1_parallel_mode:
- pr_debug("%s: set ts1 parallel mode registers\n",
- __func__);
+ dev_dbg(&dev->udev->dev,
+ "%s: set ts1 parallel mode registers\n",
+ __func__);
status = cx231xx_mode_register(dev, TS_MODE_REG, 0x100);
status = cx231xx_mode_register(dev, TS1_CFG_REG, 0x400);
break;
@@ -2917,8 +2949,9 @@ int cx231xx_gpio_i2c_read_ack(struct cx231xx *dev)
(nCnt > 0));
if (nCnt == 0)
- pr_debug("No ACK after %d msec -GPIO I2C failed!",
- nInit * 10);
+ dev_dbg(&dev->udev->dev,
+ "No ACK after %d msec -GPIO I2C failed!",
+ nInit * 10);
/*
* readAck
diff --git a/drivers/media/usb/cx231xx/cx231xx-cards.c b/drivers/media/usb/cx231xx/cx231xx-cards.c
index d59f483102d2..2e8741314bce 100644
--- a/drivers/media/usb/cx231xx/cx231xx-cards.c
+++ b/drivers/media/usb/cx231xx/cx231xx-cards.c
@@ -26,7 +26,6 @@
#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/i2c.h>
-#include <linux/usb.h>
#include <media/tuner.h>
#include <media/tveeprom.h>
#include <media/v4l2-common.h>
@@ -856,8 +855,9 @@ int cx231xx_tuner_callback(void *ptr, int component, int command, int arg)
if (dev->tuner_type == TUNER_XC5000) {
if (command == XC5000_TUNER_RESET) {
- pr_debug("Tuner CB: RESET: cmd %d : tuner type %d \n",
- command, dev->tuner_type);
+ dev_dbg(&dev->udev->dev,
+ "Tuner CB: RESET: cmd %d : tuner type %d\n",
+ command, dev->tuner_type);
cx231xx_set_gpio_value(dev, dev->board.tuner_gpio->bit,
1);
msleep(10);
@@ -915,7 +915,7 @@ void cx231xx_pre_card_setup(struct cx231xx *dev)
cx231xx_set_model(dev);
- pr_info("Identified as %s (card=%d)\n",
+ dev_info(&dev->udev->dev, "Identified as %s (card=%d)\n",
dev->board.name, dev->model);
/* set the direction for GPIO pins */
@@ -989,7 +989,7 @@ static int read_eeprom(struct cx231xx *dev, struct i2c_client *client,
/* start reading at offset 0 */
ret = i2c_transfer(client->adapter, &msg_write, 1);
if (ret < 0) {
- pr_err("Can't read eeprom\n");
+ dev_err(&dev->udev->dev, "Can't read eeprom\n");
return ret;
}
@@ -999,7 +999,7 @@ static int read_eeprom(struct cx231xx *dev, struct i2c_client *client,
ret = i2c_transfer(client->adapter, &msg_read, 1);
if (ret < 0) {
- pr_err("Can't read eeprom\n");
+ dev_err(&dev->udev->dev, "Can't read eeprom\n");
return ret;
}
eedata_cur += msg_read.len;
@@ -1007,7 +1007,8 @@ static int read_eeprom(struct cx231xx *dev, struct i2c_client *client,
}
for (i = 0; i + 15 < len; i += 16)
- pr_debug("i2c eeprom %02x: %*ph\n", i, 16, &eedata[i]);
+ dev_dbg(&dev->udev->dev, "i2c eeprom %02x: %*ph\n",
+ i, 16, &eedata[i]);
return 0;
}
@@ -1027,7 +1028,8 @@ void cx231xx_card_setup(struct cx231xx *dev)
cx231xx_get_i2c_adap(dev, I2C_0),
"cx25840", 0x88 >> 1, NULL);
if (dev->sd_cx25840 == NULL)
- pr_err("cx25840 subdev registration failure\n");
+ dev_err(&dev->udev->dev,
+ "cx25840 subdev registration failure\n");
cx25840_call(dev, core, load_fw);
}
@@ -1041,7 +1043,8 @@ void cx231xx_card_setup(struct cx231xx *dev)
"tuner",
dev->tuner_addr, NULL);
if (dev->sd_tuner == NULL)
- pr_err("tuner subdev registration failure\n");
+ dev_err(&dev->udev->dev,
+ "tuner subdev registration failure\n");
else
cx231xx_config_tuner(dev);
}
@@ -1147,7 +1150,7 @@ static int cx231xx_init_dev(struct cx231xx *dev, struct usb_device *udev,
/* Query cx231xx to find what pcb config it is related to */
retval = initialize_cx231xx(dev);
if (retval < 0) {
- pr_err("Failed to read PCB config\n");
+ dev_err(&udev->dev, "Failed to read PCB config\n");
return retval;
}
@@ -1163,7 +1166,7 @@ static int cx231xx_init_dev(struct cx231xx *dev, struct usb_device *udev,
retval = cx231xx_config(dev);
if (retval) {
- pr_err("error configuring device\n");
+ dev_err(&udev->dev, "error configuring device\n");
return -ENOMEM;
}
@@ -1173,8 +1176,9 @@ static int cx231xx_init_dev(struct cx231xx *dev, struct usb_device *udev,
/* register i2c bus */
retval = cx231xx_dev_init(dev);
if (retval) {
- pr_err("%s: cx231xx_i2c_register - errCode [%d]!\n",
- __func__, retval);
+ dev_err(&udev->dev,
+ "%s: cx231xx_i2c_register - errCode [%d]!\n",
+ __func__, retval);
goto err_dev_init;
}
@@ -1195,7 +1199,7 @@ static int cx231xx_init_dev(struct cx231xx *dev, struct usb_device *udev,
retval = cx231xx_config(dev);
if (retval) {
- pr_err("%s: cx231xx_config - errCode [%d]!\n",
+ dev_err(&udev->dev, "%s: cx231xx_config - errCode [%d]!\n",
__func__, retval);
goto err_dev_init;
}
@@ -1280,7 +1284,8 @@ static int cx231xx_init_v4l2(struct cx231xx *dev,
/* compute alternate max packet sizes for video */
idx = dev->current_pcb_config.hs_config_info[0].interface_info.video_index + 1;
if (idx >= dev->max_iad_interface_count) {
- pr_err("Video PCB interface #%d doesn't exist\n", idx);
+ dev_err(&dev->udev->dev,
+ "Video PCB interface #%d doesn't exist\n", idx);
return -ENODEV;
}
@@ -1289,9 +1294,10 @@ static int cx231xx_init_v4l2(struct cx231xx *dev,
dev->video_mode.end_point_addr = uif->altsetting[0].endpoint[isoc_pipe].desc.bEndpointAddress;
dev->video_mode.num_alt = uif->num_altsetting;
- pr_info("video EndPoint Addr 0x%x, Alternate settings: %i\n",
- dev->video_mode.end_point_addr,
- dev->video_mode.num_alt);
+ dev_info(&dev->udev->dev,
+ "video EndPoint Addr 0x%x, Alternate settings: %i\n",
+ dev->video_mode.end_point_addr,
+ dev->video_mode.num_alt);
dev->video_mode.alt_max_pkt_size = devm_kmalloc_array(&udev->dev, 32, dev->video_mode.num_alt, GFP_KERNEL);
if (dev->video_mode.alt_max_pkt_size == NULL)
@@ -1300,15 +1306,17 @@ static int cx231xx_init_v4l2(struct cx231xx *dev,
for (i = 0; i < dev->video_mode.num_alt; i++) {
u16 tmp = le16_to_cpu(uif->altsetting[i].endpoint[isoc_pipe].desc.wMaxPacketSize);
dev->video_mode.alt_max_pkt_size[i] = (tmp & 0x07ff) * (((tmp & 0x1800) >> 11) + 1);
- pr_debug("Alternate setting %i, max size= %i\n", i,
- dev->video_mode.alt_max_pkt_size[i]);
+ dev_dbg(&dev->udev->dev,
+ "Alternate setting %i, max size= %i\n", i,
+ dev->video_mode.alt_max_pkt_size[i]);
}
/* VBI Init */
idx = dev->current_pcb_config.hs_config_info[0].interface_info.vanc_index + 1;
if (idx >= dev->max_iad_interface_count) {
- pr_err("VBI PCB interface #%d doesn't exist\n", idx);
+ dev_err(&dev->udev->dev,
+ "VBI PCB interface #%d doesn't exist\n", idx);
return -ENODEV;
}
uif = udev->actconfig->interface[idx];
@@ -1318,9 +1326,10 @@ static int cx231xx_init_v4l2(struct cx231xx *dev,
bEndpointAddress;
dev->vbi_mode.num_alt = uif->num_altsetting;
- pr_info("VBI EndPoint Addr 0x%x, Alternate settings: %i\n",
- dev->vbi_mode.end_point_addr,
- dev->vbi_mode.num_alt);
+ dev_info(&dev->udev->dev,
+ "VBI EndPoint Addr 0x%x, Alternate settings: %i\n",
+ dev->vbi_mode.end_point_addr,
+ dev->vbi_mode.num_alt);
/* compute alternate max packet sizes for vbi */
dev->vbi_mode.alt_max_pkt_size = devm_kmalloc_array(&udev->dev, 32, dev->vbi_mode.num_alt, GFP_KERNEL);
@@ -1333,8 +1342,9 @@ static int cx231xx_init_v4l2(struct cx231xx *dev,
desc.wMaxPacketSize);
dev->vbi_mode.alt_max_pkt_size[i] =
(tmp & 0x07ff) * (((tmp & 0x1800) >> 11) + 1);
- pr_debug("Alternate setting %i, max size= %i\n", i,
- dev->vbi_mode.alt_max_pkt_size[i]);
+ dev_dbg(&dev->udev->dev,
+ "Alternate setting %i, max size= %i\n", i,
+ dev->vbi_mode.alt_max_pkt_size[i]);
}
/* Sliced CC VBI init */
@@ -1342,7 +1352,8 @@ static int cx231xx_init_v4l2(struct cx231xx *dev,
/* compute alternate max packet sizes for sliced CC */
idx = dev->current_pcb_config.hs_config_info[0].interface_info.hanc_index + 1;
if (idx >= dev->max_iad_interface_count) {
- pr_err("Sliced CC PCB interface #%d doesn't exist\n", idx);
+ dev_err(&dev->udev->dev,
+ "Sliced CC PCB interface #%d doesn't exist\n", idx);
return -ENODEV;
}
uif = udev->actconfig->interface[idx];
@@ -1352,9 +1363,10 @@ static int cx231xx_init_v4l2(struct cx231xx *dev,
bEndpointAddress;
dev->sliced_cc_mode.num_alt = uif->num_altsetting;
- pr_info("sliced CC EndPoint Addr 0x%x, Alternate settings: %i\n",
- dev->sliced_cc_mode.end_point_addr,
- dev->sliced_cc_mode.num_alt);
+ dev_info(&dev->udev->dev,
+ "sliced CC EndPoint Addr 0x%x, Alternate settings: %i\n",
+ dev->sliced_cc_mode.end_point_addr,
+ dev->sliced_cc_mode.num_alt);
dev->sliced_cc_mode.alt_max_pkt_size = devm_kmalloc_array(&udev->dev, 32, dev->sliced_cc_mode.num_alt, GFP_KERNEL);
if (dev->sliced_cc_mode.alt_max_pkt_size == NULL)
return -ENOMEM;
@@ -1364,8 +1376,9 @@ static int cx231xx_init_v4l2(struct cx231xx *dev,
desc.wMaxPacketSize);
dev->sliced_cc_mode.alt_max_pkt_size[i] =
(tmp & 0x07ff) * (((tmp & 0x1800) >> 11) + 1);
- pr_debug("Alternate setting %i, max size= %i\n", i,
- dev->sliced_cc_mode.alt_max_pkt_size[i]);
+ dev_dbg(&dev->udev->dev,
+ "Alternate setting %i, max size= %i\n", i,
+ dev->sliced_cc_mode.alt_max_pkt_size[i]);
}
return 0;
@@ -1389,6 +1402,7 @@ static int cx231xx_usb_probe(struct usb_interface *interface,
struct usb_interface_assoc_descriptor *assoc_desc;
ifnum = interface->altsetting[0].desc.bInterfaceNumber;
+ udev = usb_get_dev(interface_to_usbdev(interface));
/*
* Interface number 0 - IR interface (handled by mceusb driver)
@@ -1402,13 +1416,13 @@ static int cx231xx_usb_probe(struct usb_interface *interface,
nr = find_first_zero_bit(&cx231xx_devused, CX231XX_MAXBOARDS);
if (nr >= CX231XX_MAXBOARDS) {
/* No free device slots */
- pr_err("Supports only %i devices.\n", CX231XX_MAXBOARDS);
+ dev_err(&udev->dev,
+ "Supports only %i devices.\n",
+ CX231XX_MAXBOARDS);
return -ENOMEM;
}
} while (test_and_set_bit(nr, &cx231xx_devused));
- udev = usb_get_dev(interface_to_usbdev(interface));
-
/* allocate memory for our device state and initialize it */
dev = devm_kzalloc(&udev->dev, sizeof(*dev), GFP_KERNEL);
if (dev == NULL) {
@@ -1458,13 +1472,14 @@ static int cx231xx_usb_probe(struct usb_interface *interface,
speed = "unknown";
}
- pr_info("New device %s %s @ %s Mbps (%04x:%04x) with %d interfaces\n",
- udev->manufacturer ? udev->manufacturer : "",
- udev->product ? udev->product : "",
- speed,
- le16_to_cpu(udev->descriptor.idVendor),
- le16_to_cpu(udev->descriptor.idProduct),
- dev->max_iad_interface_count);
+ dev_info(&udev->dev,
+ "New device %s %s @ %s Mbps (%04x:%04x) with %d interfaces\n",
+ udev->manufacturer ? udev->manufacturer : "",
+ udev->product ? udev->product : "",
+ speed,
+ le16_to_cpu(udev->descriptor.idVendor),
+ le16_to_cpu(udev->descriptor.idProduct),
+ dev->max_iad_interface_count);
/* increment interface count */
dev->interface_count++;
@@ -1474,12 +1489,12 @@ static int cx231xx_usb_probe(struct usb_interface *interface,
assoc_desc = udev->actconfig->intf_assoc[0];
if (assoc_desc->bFirstInterface != ifnum) {
- pr_err("Not found matching IAD interface\n");
+ dev_err(&udev->dev, "Not found matching IAD interface\n");
retval = -ENODEV;
goto err_if;
}
- pr_debug("registering interface %d\n", ifnum);
+ dev_dbg(&udev->dev, "registering interface %d\n", ifnum);
/* save our data pointer in this interface device */
usb_set_intfdata(interface, dev);
@@ -1487,7 +1502,7 @@ static int cx231xx_usb_probe(struct usb_interface *interface,
/* Create v4l2 device */
retval = v4l2_device_register(&interface->dev, &dev->v4l2_dev);
if (retval) {
- pr_err("v4l2_device_register failed\n");
+ dev_err(&udev->dev, "v4l2_device_register failed\n");
goto err_v4l2;
}
@@ -1504,7 +1519,8 @@ static int cx231xx_usb_probe(struct usb_interface *interface,
/* compute alternate max packet sizes for TS1 */
idx = dev->current_pcb_config.hs_config_info[0].interface_info.ts1_index + 1;
if (idx >= dev->max_iad_interface_count) {
- pr_err("TS1 PCB interface #%d doesn't exist\n", idx);
+ dev_err(&udev->dev,
+ "TS1 PCB interface #%d doesn't exist\n", idx);
retval = -ENODEV;
goto err_video_alt;
}
@@ -1515,9 +1531,10 @@ static int cx231xx_usb_probe(struct usb_interface *interface,
desc.bEndpointAddress;
dev->ts1_mode.num_alt = uif->num_altsetting;
- pr_info("TS EndPoint Addr 0x%x, Alternate settings: %i\n",
- dev->ts1_mode.end_point_addr,
- dev->ts1_mode.num_alt);
+ dev_info(&udev->dev,
+ "TS EndPoint Addr 0x%x, Alternate settings: %i\n",
+ dev->ts1_mode.end_point_addr,
+ dev->ts1_mode.num_alt);
dev->ts1_mode.alt_max_pkt_size = devm_kmalloc_array(&udev->dev, 32, dev->ts1_mode.num_alt, GFP_KERNEL);
if (dev->ts1_mode.alt_max_pkt_size == NULL) {
@@ -1531,8 +1548,9 @@ static int cx231xx_usb_probe(struct usb_interface *interface,
wMaxPacketSize);
dev->ts1_mode.alt_max_pkt_size[i] =
(tmp & 0x07ff) * (((tmp & 0x1800) >> 11) + 1);
- pr_debug("Alternate setting %i, max size= %i\n", i,
- dev->ts1_mode.alt_max_pkt_size[i]);
+ dev_dbg(&udev->dev,
+ "Alternate setting %i, max size= %i\n", i,
+ dev->ts1_mode.alt_max_pkt_size[i]);
}
}
@@ -1596,8 +1614,9 @@ static void cx231xx_usb_disconnect(struct usb_interface *interface)
wake_up_interruptible_all(&dev->open);
if (dev->users) {
- pr_warn("device %s is open! Deregistration and memory deallocation are deferred on close.\n",
- video_device_node_name(dev->vdev));
+ dev_warn(&dev->udev->dev,
+ "device %s is open! Deregistration and memory deallocation are deferred on close.\n",
+ video_device_node_name(dev->vdev));
/* Even having users, it is safe to remove the RC i2c driver */
cx231xx_ir_exit(dev);
diff --git a/drivers/media/usb/cx231xx/cx231xx-core.c b/drivers/media/usb/cx231xx/cx231xx-core.c
index 66e8f8ae9be4..36c3ecf204c1 100644
--- a/drivers/media/usb/cx231xx/cx231xx-core.c
+++ b/drivers/media/usb/cx231xx/cx231xx-core.c
@@ -25,7 +25,6 @@
#include <linux/list.h>
#include <linux/module.h>
#include <linux/slab.h>
-#include <linux/usb.h>
#include <linux/vmalloc.h>
#include <media/v4l2-common.h>
#include <media/tuner.h>
@@ -228,7 +227,7 @@ int cx231xx_send_usb_command(struct cx231xx_i2c *i2c_bus,
/* call common vendor command request */
status = cx231xx_send_vendor_cmd(dev, &ven_req);
if (status < 0 && !dev->i2c_scan_running) {
- pr_err("%s: failed with status -%d\n",
+ dev_err(&dev->udev->dev, "%s: failed with status -%d\n",
__func__, status);
}
@@ -523,7 +522,8 @@ int cx231xx_set_video_alternate(struct cx231xx *dev)
usb_set_interface(dev->udev, usb_interface_index,
dev->video_mode.alt);
if (errCode < 0) {
- pr_err("cannot change alt number to %d (error=%i)\n",
+ dev_err(&dev->udev->dev,
+ "cannot change alt number to %d (error=%i)\n",
dev->video_mode.alt, errCode);
return errCode;
}
@@ -598,7 +598,8 @@ int cx231xx_set_alt_setting(struct cx231xx *dev, u8 index, u8 alt)
}
if (alt > 0 && max_pkt_size == 0) {
- pr_err("can't change interface %d alt no. to %d: Max. Pkt size = 0\n",
+ dev_err(&dev->udev->dev,
+ "can't change interface %d alt no. to %d: Max. Pkt size = 0\n",
usb_interface_index, alt);
/*To workaround error number=-71 on EP0 for videograbber,
need add following codes.*/
@@ -613,7 +614,8 @@ int cx231xx_set_alt_setting(struct cx231xx *dev, u8 index, u8 alt)
if (usb_interface_index > 0) {
status = usb_set_interface(dev->udev, usb_interface_index, alt);
if (status < 0) {
- pr_err("can't change interface %d alt no. to %d (err=%i)\n",
+ dev_err(&dev->udev->dev,
+ "can't change interface %d alt no. to %d (err=%i)\n",
usb_interface_index, alt, status);
return status;
}
@@ -771,8 +773,9 @@ int cx231xx_ep5_bulkout(struct cx231xx *dev, u8 *firmware, u16 size)
buffer, 4096, &actlen, 2000);
if (ret)
- pr_err("bulk message failed: %d (%d/%d)", ret,
- size, actlen);
+ dev_err(&dev->udev->dev,
+ "bulk message failed: %d (%d/%d)", ret,
+ size, actlen);
else {
errCode = actlen != size ? -1 : 0;
}
@@ -1008,14 +1011,16 @@ int cx231xx_init_isoc(struct cx231xx *dev, int max_packets,
dev->video_mode.isoc_ctl.urb =
kzalloc(sizeof(void *) * num_bufs, GFP_KERNEL);
if (!dev->video_mode.isoc_ctl.urb) {
- pr_err("cannot alloc memory for usb buffers\n");
+ dev_err(&dev->udev->dev,
+ "cannot alloc memory for usb buffers\n");
return -ENOMEM;
}
dev->video_mode.isoc_ctl.transfer_buffer =
kzalloc(sizeof(void *) * num_bufs, GFP_KERNEL);
if (!dev->video_mode.isoc_ctl.transfer_buffer) {
- pr_err("cannot allocate memory for usbtransfer\n");
+ dev_err(&dev->udev->dev,
+ "cannot allocate memory for usbtransfer\n");
kfree(dev->video_mode.isoc_ctl.urb);
return -ENOMEM;
}
@@ -1035,7 +1040,8 @@ int cx231xx_init_isoc(struct cx231xx *dev, int max_packets,
for (i = 0; i < dev->video_mode.isoc_ctl.num_bufs; i++) {
urb = usb_alloc_urb(max_packets, GFP_KERNEL);
if (!urb) {
- pr_err("cannot alloc isoc_ctl.urb %i\n", i);
+ dev_err(&dev->udev->dev,
+ "cannot alloc isoc_ctl.urb %i\n", i);
cx231xx_uninit_isoc(dev);
return -ENOMEM;
}
@@ -1045,7 +1051,8 @@ int cx231xx_init_isoc(struct cx231xx *dev, int max_packets,
usb_alloc_coherent(dev->udev, sb_size, GFP_KERNEL,
&urb->transfer_dma);
if (!dev->video_mode.isoc_ctl.transfer_buffer[i]) {
- pr_err("unable to allocate %i bytes for transfer buffer %i%s\n",
+ dev_err(&dev->udev->dev,
+ "unable to allocate %i bytes for transfer buffer %i%s\n",
sb_size, i,
in_interrupt() ? " while in int" : "");
cx231xx_uninit_isoc(dev);
@@ -1079,7 +1086,8 @@ int cx231xx_init_isoc(struct cx231xx *dev, int max_packets,
rc = usb_submit_urb(dev->video_mode.isoc_ctl.urb[i],
GFP_ATOMIC);
if (rc) {
- pr_err("submit of urb %i failed (error=%i)\n", i,
+ dev_err(&dev->udev->dev,
+ "submit of urb %i failed (error=%i)\n", i,
rc);
cx231xx_uninit_isoc(dev);
return rc;
@@ -1140,14 +1148,16 @@ int cx231xx_init_bulk(struct cx231xx *dev, int max_packets,
dev->video_mode.bulk_ctl.urb =
kzalloc(sizeof(void *) * num_bufs, GFP_KERNEL);
if (!dev->video_mode.bulk_ctl.urb) {
- pr_err("cannot alloc memory for usb buffers\n");
+ dev_err(&dev->udev->dev,
+ "cannot alloc memory for usb buffers\n");
return -ENOMEM;
}
dev->video_mode.bulk_ctl.transfer_buffer =
kzalloc(sizeof(void *) * num_bufs, GFP_KERNEL);
if (!dev->video_mode.bulk_ctl.transfer_buffer) {
- pr_err("cannot allocate memory for usbtransfer\n");
+ dev_err(&dev->udev->dev,
+ "cannot allocate memory for usbtransfer\n");
kfree(dev->video_mode.bulk_ctl.urb);
return -ENOMEM;
}
@@ -1167,7 +1177,8 @@ int cx231xx_init_bulk(struct cx231xx *dev, int max_packets,
for (i = 0; i < dev->video_mode.bulk_ctl.num_bufs; i++) {
urb = usb_alloc_urb(0, GFP_KERNEL);
if (!urb) {
- pr_err("cannot alloc bulk_ctl.urb %i\n", i);
+ dev_err(&dev->udev->dev,
+ "cannot alloc bulk_ctl.urb %i\n", i);
cx231xx_uninit_bulk(dev);
return -ENOMEM;
}
@@ -1178,7 +1189,8 @@ int cx231xx_init_bulk(struct cx231xx *dev, int max_packets,
usb_alloc_coherent(dev->udev, sb_size, GFP_KERNEL,
&urb->transfer_dma);
if (!dev->video_mode.bulk_ctl.transfer_buffer[i]) {
- pr_err("unable to allocate %i bytes for transfer buffer %i%s\n",
+ dev_err(&dev->udev->dev,
+ "unable to allocate %i bytes for transfer buffer %i%s\n",
sb_size, i,
in_interrupt() ? " while in int" : "");
cx231xx_uninit_bulk(dev);
@@ -1200,7 +1212,8 @@ int cx231xx_init_bulk(struct cx231xx *dev, int max_packets,
rc = usb_submit_urb(dev->video_mode.bulk_ctl.urb[i],
GFP_ATOMIC);
if (rc) {
- pr_err("submit of urb %i failed (error=%i)\n", i,rc);
+ dev_err(&dev->udev->dev,
+ "submit of urb %i failed (error=%i)\n", i, rc);
cx231xx_uninit_bulk(dev);
return rc;
}
@@ -1303,7 +1316,8 @@ int cx231xx_dev_init(struct cx231xx *dev)
errCode = cx231xx_set_power_mode(dev,
POLARIS_AVMODE_ENXTERNAL_AV);
if (errCode < 0) {
- pr_err("%s: Failed to set Power - errCode [%d]!\n",
+ dev_err(&dev->udev->dev,
+ "%s: Failed to set Power - errCode [%d]!\n",
__func__, errCode);
return errCode;
}
@@ -1311,7 +1325,8 @@ int cx231xx_dev_init(struct cx231xx *dev)
errCode = cx231xx_set_power_mode(dev,
POLARIS_AVMODE_ANALOGT_TV);
if (errCode < 0) {
- pr_err("%s: Failed to set Power - errCode [%d]!\n",
+ dev_err(&dev->udev->dev,
+ "%s: Failed to set Power - errCode [%d]!\n",
__func__, errCode);
return errCode;
}
@@ -1325,13 +1340,15 @@ int cx231xx_dev_init(struct cx231xx *dev)
/* initialize Colibri block */
errCode = cx231xx_afe_init_super_block(dev, 0x23c);
if (errCode < 0) {
- pr_err("%s: cx231xx_afe init super block - errCode [%d]!\n",
+ dev_err(&dev->udev->dev,
+ "%s: cx231xx_afe init super block - errCode [%d]!\n",
__func__, errCode);
return errCode;
}
errCode = cx231xx_afe_init_channels(dev);
if (errCode < 0) {
- pr_err("%s: cx231xx_afe init channels - errCode [%d]!\n",
+ dev_err(&dev->udev->dev,
+ "%s: cx231xx_afe init channels - errCode [%d]!\n",
__func__, errCode);
return errCode;
}
@@ -1339,7 +1356,8 @@ int cx231xx_dev_init(struct cx231xx *dev)
/* Set DIF in By pass mode */
errCode = cx231xx_dif_set_standard(dev, DIF_USE_BASEBAND);
if (errCode < 0) {
- pr_err("%s: cx231xx_dif set to By pass mode - errCode [%d]!\n",
+ dev_err(&dev->udev->dev,
+ "%s: cx231xx_dif set to By pass mode - errCode [%d]!\n",
__func__, errCode);
return errCode;
}
@@ -1347,7 +1365,8 @@ int cx231xx_dev_init(struct cx231xx *dev)
/* I2S block related functions */
errCode = cx231xx_i2s_blk_initialize(dev);
if (errCode < 0) {
- pr_err("%s: cx231xx_i2s block initialize - errCode [%d]!\n",
+ dev_err(&dev->udev->dev,
+ "%s: cx231xx_i2s block initialize - errCode [%d]!\n",
__func__, errCode);
return errCode;
}
@@ -1355,7 +1374,8 @@ int cx231xx_dev_init(struct cx231xx *dev)
/* init control pins */
errCode = cx231xx_init_ctrl_pin_status(dev);
if (errCode < 0) {
- pr_err("%s: cx231xx_init ctrl pins - errCode [%d]!\n",
+ dev_err(&dev->udev->dev,
+ "%s: cx231xx_init ctrl pins - errCode [%d]!\n",
__func__, errCode);
return errCode;
}
@@ -1381,7 +1401,8 @@ int cx231xx_dev_init(struct cx231xx *dev)
break;
}
if (errCode < 0) {
- pr_err("%s: cx231xx_AGC mode to Analog - errCode [%d]!\n",
+ dev_err(&dev->udev->dev,
+ "%s: cx231xx_AGC mode to Analog - errCode [%d]!\n",
__func__, errCode);
return errCode;
}
@@ -1457,7 +1478,7 @@ int cx231xx_send_gpio_cmd(struct cx231xx *dev, u32 gpio_bit, u8 *gpio_val,
/* call common vendor command request */
status = cx231xx_send_vendor_cmd(dev, &ven_req);
if (status < 0) {
- pr_err("%s: failed with status -%d\n",
+ dev_err(&dev->udev->dev, "%s: failed with status -%d\n",
__func__, status);
}
diff --git a/drivers/media/usb/cx231xx/cx231xx-dvb.c b/drivers/media/usb/cx231xx/cx231xx-dvb.c
index b6af923eb5a3..044ad353d09b 100644
--- a/drivers/media/usb/cx231xx/cx231xx-dvb.c
+++ b/drivers/media/usb/cx231xx/cx231xx-dvb.c
@@ -22,7 +22,6 @@
#include "cx231xx.h"
#include <linux/kernel.h>
#include <linux/slab.h>
-#include <linux/usb.h>
#include <media/v4l2-common.h>
#include <media/videobuf-vmalloc.h>
@@ -265,7 +264,7 @@ static int start_streaming(struct cx231xx_dvb *dvb)
struct cx231xx *dev = dvb->adapter.priv;
if (dev->USE_ISO) {
- pr_debug("DVB transfer mode is ISO.\n");
+ dev_dbg(&dev->udev->dev, "DVB transfer mode is ISO.\n");
cx231xx_set_alt_setting(dev, INDEX_TS1, 4);
rc = cx231xx_set_mode(dev, CX231XX_DIGITAL_MODE);
if (rc < 0)
@@ -276,7 +275,7 @@ static int start_streaming(struct cx231xx_dvb *dvb)
dev->ts1_mode.max_pkt_size,
dvb_isoc_copy);
} else {
- pr_debug("DVB transfer mode is BULK.\n");
+ dev_dbg(&dev->udev->dev, "DVB transfer mode is BULK.\n");
cx231xx_set_alt_setting(dev, INDEX_TS1, 0);
rc = cx231xx_set_mode(dev, CX231XX_DIGITAL_MODE);
if (rc < 0)
@@ -430,14 +429,17 @@ int cx231xx_reset_analog_tuner(struct cx231xx *dev)
if (dops->init != NULL && !dev->xc_fw_load_done) {
- pr_debug("Reloading firmware for XC5000\n");
+ dev_dbg(&dev->udev->dev,
+ "Reloading firmware for XC5000\n");
status = dops->init(dev->dvb->frontend);
if (status == 0) {
dev->xc_fw_load_done = 1;
- pr_debug("XC5000 firmware download completed\n");
+ dev_dbg(&dev->udev->dev,
+ "XC5000 firmware download completed\n");
} else {
dev->xc_fw_load_done = 0;
- pr_debug("XC5000 firmware download failed !!!\n");
+ dev_dbg(&dev->udev->dev,
+ "XC5000 firmware download failed !!!\n");
}
}
diff --git a/drivers/media/usb/cx231xx/cx231xx-i2c.c b/drivers/media/usb/cx231xx/cx231xx-i2c.c
index f99857e6c842..c4dc13afbe05 100644
--- a/drivers/media/usb/cx231xx/cx231xx-i2c.c
+++ b/drivers/media/usb/cx231xx/cx231xx-i2c.c
@@ -23,7 +23,6 @@
#include "cx231xx.h"
#include <linux/module.h>
#include <linux/kernel.h>
-#include <linux/usb.h>
#include <linux/i2c.h>
#include <linux/i2c-mux.h>
#include <media/v4l2-common.h>
@@ -502,18 +501,20 @@ void cx231xx_do_i2c_scan(struct cx231xx *dev, int i2c_port)
memset(&client, 0, sizeof(client));
client.adapter = cx231xx_get_i2c_adap(dev, i2c_port);
- pr_info("i2c_scan: checking for I2C devices on port=%d ..\n",
+ dev_info(&dev->udev->dev,
+ "i2c_scan: checking for I2C devices on port=%d ..\n",
i2c_port);
for (i = 0; i < 128; i++) {
client.addr = i;
rc = i2c_master_recv(&client, &buf, 0);
if (rc < 0)
continue;
- pr_info("i2c scan: found device @ 0x%x [%s]\n",
- i << 1,
- i2c_devs[i] ? i2c_devs[i] : "???");
+ dev_info(&dev->udev->dev,
+ "i2c scan: found device @ 0x%x [%s]\n",
+ i << 1,
+ i2c_devs[i] ? i2c_devs[i] : "???");
}
- pr_info("i2c scan: Completed Checking for I2C devices on port=%d.\n",
+ dev_info(&dev->udev->dev, "i2c scan: Completed Checking for I2C devices on port=%d.\n",
i2c_port);
dev->i2c_scan_running = false;
@@ -539,7 +540,8 @@ int cx231xx_i2c_register(struct cx231xx_i2c *bus)
i2c_add_adapter(&bus->i2c_adap);
if (0 != bus->i2c_rc)
- pr_warn("i2c bus %d register FAILED\n", bus->nr);
+ dev_warn(&dev->udev->dev,
+ "i2c bus %d register FAILED\n", bus->nr);
return bus->i2c_rc;
}
@@ -582,7 +584,8 @@ int cx231xx_i2c_mux_register(struct cx231xx *dev, int mux_no)
NULL);
if (!dev->i2c_mux_adap[mux_no])
- pr_warn("i2c mux %d register FAILED\n", mux_no);
+ dev_warn(&dev->udev->dev,
+ "i2c mux %d register FAILED\n", mux_no);
return 0;
}
diff --git a/drivers/media/usb/cx231xx/cx231xx-input.c b/drivers/media/usb/cx231xx/cx231xx-input.c
index 5ae2ce3f51b1..f954da6abf31 100644
--- a/drivers/media/usb/cx231xx/cx231xx-input.c
+++ b/drivers/media/usb/cx231xx/cx231xx-input.c
@@ -19,7 +19,6 @@
*/
#include "cx231xx.h"
-#include <linux/usb.h>
#include <linux/slab.h>
#include <linux/bitrev.h>
diff --git a/drivers/media/usb/cx231xx/cx231xx-pcb-cfg.c b/drivers/media/usb/cx231xx/cx231xx-pcb-cfg.c
index 2f8dc6afac54..ee9d6225236a 100644
--- a/drivers/media/usb/cx231xx/cx231xx-pcb-cfg.c
+++ b/drivers/media/usb/cx231xx/cx231xx-pcb-cfg.c
@@ -703,8 +703,8 @@ int initialize_cx231xx(struct cx231xx *dev)
_current_scenario_idx = INDEX_BUSPOWER_DIF_ONLY;
break;
default:
- pr_err("bad config in buspower!!!!\n");
- pr_err("config_info=%x\n",
+ dev_err(&dev->udev->dev,
+ "bad config in buspower!!!!\nconfig_info=%x\n",
config_info & BUSPOWER_MASK);
return 1;
}
@@ -768,8 +768,8 @@ int initialize_cx231xx(struct cx231xx *dev)
_current_scenario_idx = INDEX_SELFPOWER_COMPRESSOR;
break;
default:
- pr_err("bad senario!!!!!\n");
- pr_err("config_info=%x\n",
+ dev_err(&dev->udev->dev,
+ "bad senario!!!!!\nconfig_info=%x\n",
config_info & SELFPOWER_MASK);
return -ENODEV;
}
@@ -781,18 +781,29 @@ int initialize_cx231xx(struct cx231xx *dev)
sizeof(struct pcb_config));
if (pcb_debug) {
- pr_info("SC(0x00) register = 0x%x\n", config_info);
- pr_info("scenario %d\n",
- (dev->current_pcb_config.index) + 1);
- pr_info("type=%x\n", dev->current_pcb_config.type);
- pr_info("mode=%x\n", dev->current_pcb_config.mode);
- pr_info("speed=%x\n", dev->current_pcb_config.speed);
- pr_info("ts1_source=%x\n",
- dev->current_pcb_config.ts1_source);
- pr_info("ts2_source=%x\n",
- dev->current_pcb_config.ts2_source);
- pr_info("analog_source=%x\n",
- dev->current_pcb_config.analog_source);
+ dev_info(&dev->udev->dev,
+ "SC(0x00) register = 0x%x\n", config_info);
+ dev_info(&dev->udev->dev,
+ "scenario %d\n",
+ (dev->current_pcb_config.index) + 1);
+ dev_info(&dev->udev->dev,
+ "type=%x\n",
+ dev->current_pcb_config.type);
+ dev_info(&dev->udev->dev,
+ "mode=%x\n",
+ dev->current_pcb_config.mode);
+ dev_info(&dev->udev->dev,
+ "speed=%x\n",
+ dev->current_pcb_config.speed);
+ dev_info(&dev->udev->dev,
+ "ts1_source=%x\n",
+ dev->current_pcb_config.ts1_source);
+ dev_info(&dev->udev->dev,
+ "ts2_source=%x\n",
+ dev->current_pcb_config.ts2_source);
+ dev_info(&dev->udev->dev,
+ "analog_source=%x\n",
+ dev->current_pcb_config.analog_source);
}
return 0;
diff --git a/drivers/media/usb/cx231xx/cx231xx-vbi.c b/drivers/media/usb/cx231xx/cx231xx-vbi.c
index 14e1eb7f2128..9a562c80e0b1 100644
--- a/drivers/media/usb/cx231xx/cx231xx-vbi.c
+++ b/drivers/media/usb/cx231xx/cx231xx-vbi.c
@@ -25,7 +25,6 @@
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/bitmap.h>
-#include <linux/usb.h>
#include <linux/i2c.h>
#include <linux/mm.h>
#include <linux/mutex.h>
@@ -69,9 +68,11 @@ static inline void print_err_status(struct cx231xx *dev, int packet, int status)
break;
}
if (packet < 0) {
- pr_err("URB status %d [%s].\n", status, errmsg);
+ dev_err(&dev->udev->dev,
+ "URB status %d [%s].\n", status, errmsg);
} else {
- pr_err("URB packet %d, status %d [%s].\n",
+ dev_err(&dev->udev->dev,
+ "URB packet %d, status %d [%s].\n",
packet, status, errmsg);
}
}
@@ -315,8 +316,8 @@ static void cx231xx_irq_vbi_callback(struct urb *urb)
case -ESHUTDOWN:
return;
default: /* error */
- pr_err("urb completition error %d.\n",
- urb->status);
+ dev_err(&dev->udev->dev,
+ "urb completition error %d.\n", urb->status);
break;
}
@@ -330,7 +331,7 @@ static void cx231xx_irq_vbi_callback(struct urb *urb)
urb->status = usb_submit_urb(urb, GFP_ATOMIC);
if (urb->status) {
- pr_err("urb resubmit failed (error=%i)\n",
+ dev_err(&dev->udev->dev, "urb resubmit failed (error=%i)\n",
urb->status);
}
}
@@ -343,7 +344,7 @@ void cx231xx_uninit_vbi_isoc(struct cx231xx *dev)
struct urb *urb;
int i;
- pr_debug("called cx231xx_uninit_vbi_isoc\n");
+ dev_dbg(&dev->udev->dev, "called cx231xx_uninit_vbi_isoc\n");
dev->vbi_mode.bulk_ctl.nfields = -1;
for (i = 0; i < dev->vbi_mode.bulk_ctl.num_bufs; i++) {
@@ -392,7 +393,7 @@ int cx231xx_init_vbi_isoc(struct cx231xx *dev, int max_packets,
struct urb *urb;
int rc;
- pr_debug("called cx231xx_vbi_isoc\n");
+ dev_dbg(&dev->udev->dev, "called cx231xx_vbi_isoc\n");
/* De-allocates all pending stuff */
cx231xx_uninit_vbi_isoc(dev);
@@ -418,14 +419,16 @@ int cx231xx_init_vbi_isoc(struct cx231xx *dev, int max_packets,
dev->vbi_mode.bulk_ctl.urb = kzalloc(sizeof(void *) * num_bufs,
GFP_KERNEL);
if (!dev->vbi_mode.bulk_ctl.urb) {
- pr_err("cannot alloc memory for usb buffers\n");
+ dev_err(&dev->udev->dev,
+ "cannot alloc memory for usb buffers\n");
return -ENOMEM;
}
dev->vbi_mode.bulk_ctl.transfer_buffer =
kzalloc(sizeof(void *) * num_bufs, GFP_KERNEL);
if (!dev->vbi_mode.bulk_ctl.transfer_buffer) {
- pr_err("cannot allocate memory for usbtransfer\n");
+ dev_err(&dev->udev->dev,
+ "cannot allocate memory for usbtransfer\n");
kfree(dev->vbi_mode.bulk_ctl.urb);
return -ENOMEM;
}
@@ -440,7 +443,8 @@ int cx231xx_init_vbi_isoc(struct cx231xx *dev, int max_packets,
urb = usb_alloc_urb(0, GFP_KERNEL);
if (!urb) {
- pr_err("cannot alloc bulk_ctl.urb %i\n", i);
+ dev_err(&dev->udev->dev,
+ "cannot alloc bulk_ctl.urb %i\n", i);
cx231xx_uninit_vbi_isoc(dev);
return -ENOMEM;
}
@@ -450,7 +454,8 @@ int cx231xx_init_vbi_isoc(struct cx231xx *dev, int max_packets,
dev->vbi_mode.bulk_ctl.transfer_buffer[i] =
kzalloc(sb_size, GFP_KERNEL);
if (!dev->vbi_mode.bulk_ctl.transfer_buffer[i]) {
- pr_err("unable to allocate %i bytes for transfer buffer %i%s\n",
+ dev_err(&dev->udev->dev,
+ "unable to allocate %i bytes for transfer buffer %i%s\n",
sb_size, i,
in_interrupt() ? " while in int" : "");
cx231xx_uninit_vbi_isoc(dev);
@@ -469,7 +474,8 @@ int cx231xx_init_vbi_isoc(struct cx231xx *dev, int max_packets,
for (i = 0; i < dev->vbi_mode.bulk_ctl.num_bufs; i++) {
rc = usb_submit_urb(dev->vbi_mode.bulk_ctl.urb[i], GFP_ATOMIC);
if (rc) {
- pr_err("submit of urb %i failed (error=%i)\n", i, rc);
+ dev_err(&dev->udev->dev,
+ "submit of urb %i failed (error=%i)\n", i, rc);
cx231xx_uninit_vbi_isoc(dev);
return rc;
}
@@ -520,7 +526,7 @@ static inline void vbi_buffer_filled(struct cx231xx *dev,
struct cx231xx_buffer *buf)
{
/* Advice that buffer was filled */
- /* pr_debug("[%p/%d] wakeup\n", buf, buf->vb.i); */
+ /* dev_dbg(&dev->udev->dev, "[%p/%d] wakeup\n", buf, buf->vb.i); */
buf->vb.state = VIDEOBUF_DONE;
buf->vb.field_count++;
@@ -612,7 +618,7 @@ static inline void get_next_vbi_buf(struct cx231xx_dmaqueue *dma_q,
char *outp;
if (list_empty(&dma_q->active)) {
- pr_err("No active queue to serve\n");
+ dev_err(&dev->udev->dev, "No active queue to serve\n");
dev->vbi_mode.bulk_ctl.buf = NULL;
*buf = NULL;
return;
diff --git a/drivers/media/usb/cx231xx/cx231xx-video.c b/drivers/media/usb/cx231xx/cx231xx-video.c
index 4d1d750ab38d..5ea8124f5d20 100644
--- a/drivers/media/usb/cx231xx/cx231xx-video.c
+++ b/drivers/media/usb/cx231xx/cx231xx-video.c
@@ -28,7 +28,6 @@
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/bitmap.h>
-#include <linux/usb.h>
#include <linux/i2c.h>
#include <linux/mm.h>
#include <linux/mutex.h>
@@ -737,8 +736,9 @@ buffer_prepare(struct videobuf_queue *vq, struct videobuf_buffer *vb,
if (!dev->video_mode.bulk_ctl.num_bufs)
urb_init = 1;
}
- /*pr_debug("urb_init=%d dev->video_mode.max_pkt_size=%d\n",
- urb_init, dev->video_mode.max_pkt_size);*/
+ dev_dbg(&dev->udev->dev,
+ "urb_init=%d dev->video_mode.max_pkt_size=%d\n",
+ urb_init, dev->video_mode.max_pkt_size);
if (urb_init) {
dev->mode_tv = 0;
if (dev->USE_ISO)
@@ -809,7 +809,7 @@ void video_mux(struct cx231xx *dev, int index)
cx231xx_set_audio_input(dev, dev->ctl_ainput);
- pr_debug("video_mux : %d\n", index);
+ dev_dbg(&dev->udev->dev, "video_mux : %d\n", index);
/* do mode control overrides if required */
cx231xx_do_mode_ctrl_overrides(dev);
@@ -861,7 +861,7 @@ static void res_free(struct cx231xx_fh *fh)
static int check_dev(struct cx231xx *dev)
{
if (dev->state & DEV_DISCONNECTED) {
- pr_err("v4l2 ioctl: device not present\n");
+ dev_err(&dev->udev->dev, "v4l2 ioctl: device not present\n");
return -ENODEV;
}
return 0;
@@ -953,12 +953,13 @@ static int vidioc_s_fmt_vid_cap(struct file *file, void *priv,
return -EINVAL;
if (videobuf_queue_is_busy(&fh->vb_vidq)) {
- pr_err("%s: queue busy\n", __func__);
+ dev_err(&dev->udev->dev, "%s: queue busy\n", __func__);
return -EBUSY;
}
if (dev->stream_on && !fh->stream_on) {
- pr_err("%s: device in use by another fh\n", __func__);
+ dev_err(&dev->udev->dev,
+ "%s: device in use by another fh\n", __func__);
return -EBUSY;
}
@@ -1176,8 +1177,9 @@ int cx231xx_s_frequency(struct file *file, void *priv,
int rc;
u32 if_frequency = 5400000;
- pr_debug("Enter vidioc_s_frequency()f->frequency=%d;f->type=%d\n",
- f->frequency, f->type);
+ dev_dbg(&dev->udev->dev,
+ "Enter vidioc_s_frequency()f->frequency=%d;f->type=%d\n",
+ f->frequency, f->type);
rc = check_dev(dev);
if (rc < 0)
@@ -1212,13 +1214,14 @@ int cx231xx_s_frequency(struct file *file, void *priv,
else if (dev->norm & V4L2_STD_SECAM_LC)
if_frequency = 1250000; /*1.25MHz */
- pr_debug("if_frequency is set to %d\n", if_frequency);
+ dev_dbg(&dev->udev->dev,
+ "if_frequency is set to %d\n", if_frequency);
cx231xx_set_Colibri_For_LowIF(dev, if_frequency, 1, 1);
update_HH_register_after_set_DIF(dev);
}
- pr_debug("Set New FREQUENCY to %d\n", f->frequency);
+ dev_dbg(&dev->udev->dev, "Set New FREQUENCY to %d\n", f->frequency);
return rc;
}
@@ -1522,7 +1525,8 @@ static int vidioc_s_fmt_vbi_cap(struct file *file, void *priv,
struct cx231xx *dev = fh->dev;
if (dev->vbi_stream_on && !fh->stream_on) {
- pr_err("%s device in use by another fh\n", __func__);
+ dev_err(&dev->udev->dev,
+ "%s device in use by another fh\n", __func__);
return -EBUSY;
}
return vidioc_try_fmt_vbi_cap(file, priv, f);
@@ -1641,16 +1645,15 @@ static int cx231xx_v4l2_open(struct file *filp)
#if 0
errCode = cx231xx_set_mode(dev, CX231XX_ANALOG_MODE);
if (errCode < 0) {
- pr_err("Device locked on digital mode. Can't open analog\n");
+ dev_err(&dev->udev->dev,
+ "Device locked on digital mode. Can't open analog\n");
return -EBUSY;
}
#endif
fh = kzalloc(sizeof(struct cx231xx_fh), GFP_KERNEL);
- if (!fh) {
- pr_err("cx231xx-video.c: Out of memory?!\n");
+ if (!fh)
return -ENOMEM;
- }
if (mutex_lock_interruptible(&dev->lock)) {
kfree(fh);
return -ERESTARTSYS;
@@ -1734,7 +1737,7 @@ void cx231xx_release_analog_resources(struct cx231xx *dev)
dev->radio_dev = NULL;
}
if (dev->vbi_dev) {
- pr_info("V4L2 device %s deregistered\n",
+ dev_info(&dev->udev->dev, "V4L2 device %s deregistered\n",
video_device_node_name(dev->vbi_dev));
if (video_is_registered(dev->vbi_dev))
video_unregister_device(dev->vbi_dev);
@@ -1743,7 +1746,7 @@ void cx231xx_release_analog_resources(struct cx231xx *dev)
dev->vbi_dev = NULL;
}
if (dev->vdev) {
- pr_info("V4L2 device %s deregistered\n",
+ dev_info(&dev->udev->dev, "V4L2 device %s deregistered\n",
video_device_node_name(dev->vdev));
if (dev->board.has_417)
@@ -2078,7 +2081,7 @@ int cx231xx_register_analog_devices(struct cx231xx *dev)
{
int ret;
- pr_info("v4l2 driver version %s\n", CX231XX_VERSION);
+ dev_info(&dev->udev->dev, "v4l2 driver version %s\n", CX231XX_VERSION);
/* set default norm */
dev->norm = V4L2_STD_PAL;
@@ -2116,7 +2119,7 @@ int cx231xx_register_analog_devices(struct cx231xx *dev)
/* allocate and fill video video_device struct */
dev->vdev = cx231xx_vdev_init(dev, &cx231xx_video_template, "video");
if (!dev->vdev) {
- pr_err("cannot allocate video_device.\n");
+ dev_err(&dev->udev->dev, "cannot allocate video_device.\n");
return -ENODEV;
}
@@ -2125,12 +2128,13 @@ int cx231xx_register_analog_devices(struct cx231xx *dev)
ret = video_register_device(dev->vdev, VFL_TYPE_GRABBER,
video_nr[dev->devno]);
if (ret) {
- pr_err("unable to register video device (error=%i).\n",
+ dev_err(&dev->udev->dev,
+ "unable to register video device (error=%i).\n",
ret);
return ret;
}
- pr_info("Registered video device %s [v4l2]\n",
+ dev_info(&dev->udev->dev, "Registered video device %s [v4l2]\n",
video_device_node_name(dev->vdev));
/* Initialize VBI template */
@@ -2141,7 +2145,7 @@ int cx231xx_register_analog_devices(struct cx231xx *dev)
dev->vbi_dev = cx231xx_vdev_init(dev, &cx231xx_vbi_template, "vbi");
if (!dev->vbi_dev) {
- pr_err("cannot allocate video_device.\n");
+ dev_err(&dev->udev->dev, "cannot allocate video_device.\n");
return -ENODEV;
}
dev->vbi_dev->ctrl_handler = &dev->ctrl_handler;
@@ -2149,28 +2153,30 @@ int cx231xx_register_analog_devices(struct cx231xx *dev)
ret = video_register_device(dev->vbi_dev, VFL_TYPE_VBI,
vbi_nr[dev->devno]);
if (ret < 0) {
- pr_err("unable to register vbi device\n");
+ dev_err(&dev->udev->dev, "unable to register vbi device\n");
return ret;
}
- pr_info("Registered VBI device %s\n",
+ dev_info(&dev->udev->dev, "Registered VBI device %s\n",
video_device_node_name(dev->vbi_dev));
if (cx231xx_boards[dev->model].radio.type == CX231XX_RADIO) {
dev->radio_dev = cx231xx_vdev_init(dev, &cx231xx_radio_template,
"radio");
if (!dev->radio_dev) {
- pr_err("cannot allocate video_device.\n");
+ dev_err(&dev->udev->dev,
+ "cannot allocate video_device.\n");
return -ENODEV;
}
dev->radio_dev->ctrl_handler = &dev->radio_ctrl_handler;
ret = video_register_device(dev->radio_dev, VFL_TYPE_RADIO,
radio_nr[dev->devno]);
if (ret < 0) {
- pr_err("can't register radio device\n");
+ dev_err(&dev->udev->dev,
+ "can't register radio device\n");
return ret;
}
- pr_info("Registered radio device as %s\n",
+ dev_info(&dev->udev->dev, "Registered radio device as %s\n",
video_device_node_name(dev->radio_dev));
}
diff --git a/drivers/media/usb/cx231xx/cx231xx.h b/drivers/media/usb/cx231xx/cx231xx.h
index 253f2437c0f1..1a850da4e8c0 100644
--- a/drivers/media/usb/cx231xx/cx231xx.h
+++ b/drivers/media/usb/cx231xx/cx231xx.h
@@ -22,14 +22,13 @@
#ifndef _CX231XX_H
#define _CX231XX_H
-#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-
#include <linux/videodev2.h>
#include <linux/types.h>
#include <linux/ioctl.h>
#include <linux/i2c.h>
#include <linux/workqueue.h>
#include <linux/mutex.h>
+#include <linux/usb.h>
#include <media/cx2341x.h>
--
1.9.3
^ permalink raw reply related [flat|nested] 18+ messages in thread* [PATCHv2 09/14] [media] cx231xx: get rid of audio debug parameter
2014-11-02 12:32 [PATCHv2 00/14] Reduce cx231xx verbosity and do some cleanups Mauro Carvalho Chehab
` (7 preceding siblings ...)
2014-11-02 12:32 ` [PATCHv2 08/14] [media] cx231xx: convert from pr_foo to dev_foo Mauro Carvalho Chehab
@ 2014-11-02 12:32 ` Mauro Carvalho Chehab
2014-11-02 12:32 ` [PATCHv2 10/14] [media] cx231xx: use dev_foo instead of printk Mauro Carvalho Chehab
` (5 subsequent siblings)
14 siblings, 0 replies; 18+ messages in thread
From: Mauro Carvalho Chehab @ 2014-11-02 12:32 UTC (permalink / raw)
To: Linux Media Mailing List
Cc: Mauro Carvalho Chehab, Mauro Carvalho Chehab, Takashi Iwai
There's just one debug level on cx231xx-audio. So, converting it
to dev_dbg() is easy.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
diff --git a/drivers/media/usb/cx231xx/cx231xx-audio.c b/drivers/media/usb/cx231xx/cx231xx-audio.c
index 1c3f68179fc9..a05ae02e5245 100644
--- a/drivers/media/usb/cx231xx/cx231xx-audio.c
+++ b/drivers/media/usb/cx231xx/cx231xx-audio.c
@@ -42,19 +42,13 @@ static int debug;
module_param(debug, int, 0644);
MODULE_PARM_DESC(debug, "activates debug info");
-#define dprintk(fmt, arg...) do { \
- if (debug) \
- printk(KERN_INFO "cx231xx-audio %s: " fmt, \
- __func__, ##arg); \
- } while (0)
-
static int index[SNDRV_CARDS] = SNDRV_DEFAULT_IDX;
static int cx231xx_isoc_audio_deinit(struct cx231xx *dev)
{
int i;
- dprintk("Stopping isoc\n");
+ dev_dbg(&dev->udev->dev, "Stopping isoc\n");
for (i = 0; i < CX231XX_AUDIO_BUFS; i++) {
if (dev->adev.urb[i]) {
@@ -78,7 +72,7 @@ static int cx231xx_bulk_audio_deinit(struct cx231xx *dev)
{
int i;
- dprintk("Stopping bulk\n");
+ dev_dbg(&dev->udev->dev, "Stopping bulk\n");
for (i = 0; i < CX231XX_AUDIO_BUFS; i++) {
if (dev->adev.urb[i]) {
@@ -122,7 +116,8 @@ static void cx231xx_audio_isocirq(struct urb *urb)
case -ESHUTDOWN:
return;
default: /* error */
- dprintk("urb completition error %d.\n", urb->status);
+ dev_dbg(&dev->udev->dev, "urb completition error %d.\n",
+ urb->status);
break;
}
@@ -211,7 +206,8 @@ static void cx231xx_audio_bulkirq(struct urb *urb)
case -ESHUTDOWN:
return;
default: /* error */
- dprintk("urb completition error %d.\n", urb->status);
+ dev_dbg(&dev->udev->dev, "urb completition error %d.\n",
+ urb->status);
break;
}
@@ -395,8 +391,9 @@ static int snd_pcm_alloc_vmalloc_buffer(struct snd_pcm_substream *subs,
size_t size)
{
struct snd_pcm_runtime *runtime = subs->runtime;
+ struct cx231xx *dev = snd_pcm_substream_chip(subs);
- dprintk("Allocating vbuffer\n");
+ dev_dbg(&dev->udev->dev, "Allocating vbuffer\n");
if (runtime->dma_area) {
if (runtime->dma_bytes > size)
return 0;
@@ -439,7 +436,8 @@ static int snd_cx231xx_capture_open(struct snd_pcm_substream *substream)
struct snd_pcm_runtime *runtime = substream->runtime;
int ret = 0;
- dprintk("opening device and trying to acquire exclusive lock\n");
+ dev_dbg(&dev->udev->dev,
+ "opening device and trying to acquire exclusive lock\n");
if (!dev) {
dev_err(&dev->udev->dev,
@@ -489,7 +487,7 @@ static int snd_cx231xx_pcm_close(struct snd_pcm_substream *substream)
int ret;
struct cx231xx *dev = snd_pcm_substream_chip(substream);
- dprintk("closing device\n");
+ dev_dbg(&dev->udev->dev, "closing device\n");
/* inform hardware to stop streaming */
mutex_lock(&dev->lock);
@@ -510,10 +508,10 @@ static int snd_cx231xx_pcm_close(struct snd_pcm_substream *substream)
mutex_unlock(&dev->lock);
if (dev->adev.users == 0 && dev->adev.shutdown == 1) {
- dprintk("audio users: %d\n", dev->adev.users);
- dprintk("disabling audio stream!\n");
+ dev_dbg(&dev->udev->dev, "audio users: %d\n", dev->adev.users);
+ dev_dbg(&dev->udev->dev, "disabling audio stream!\n");
dev->adev.shutdown = 0;
- dprintk("released lock\n");
+ dev_dbg(&dev->udev->dev, "released lock\n");
if (atomic_read(&dev->stream_started) > 0) {
atomic_set(&dev->stream_started, 0);
schedule_work(&dev->wq_trigger);
@@ -525,9 +523,10 @@ static int snd_cx231xx_pcm_close(struct snd_pcm_substream *substream)
static int snd_cx231xx_hw_capture_params(struct snd_pcm_substream *substream,
struct snd_pcm_hw_params *hw_params)
{
+ struct cx231xx *dev = snd_pcm_substream_chip(substream);
int ret;
- dprintk("Setting capture parameters\n");
+ dev_dbg(&dev->udev->dev, "Setting capture parameters\n");
ret = snd_pcm_alloc_vmalloc_buffer(substream,
params_buffer_bytes(hw_params));
@@ -549,7 +548,7 @@ static int snd_cx231xx_hw_capture_free(struct snd_pcm_substream *substream)
{
struct cx231xx *dev = snd_pcm_substream_chip(substream);
- dprintk("Stop capture, if needed\n");
+ dev_dbg(&dev->udev->dev, "Stop capture, if needed\n");
if (atomic_read(&dev->stream_started) > 0) {
atomic_set(&dev->stream_started, 0);
@@ -574,7 +573,7 @@ static void audio_trigger(struct work_struct *work)
struct cx231xx *dev = container_of(work, struct cx231xx, wq_trigger);
if (atomic_read(&dev->stream_started)) {
- dprintk("starting capture");
+ dev_dbg(&dev->udev->dev, "starting capture");
if (is_fw_load(dev) == 0)
cx25840_call(dev, core, load_fw);
if (dev->USE_ISO)
@@ -582,7 +581,7 @@ static void audio_trigger(struct work_struct *work)
else
cx231xx_init_audio_bulk(dev);
} else {
- dprintk("stopping capture");
+ dev_dbg(&dev->udev->dev, "stopping capture");
cx231xx_isoc_audio_deinit(dev);
}
}
--
1.9.3
^ permalink raw reply related [flat|nested] 18+ messages in thread* [PATCHv2 10/14] [media] cx231xx: use dev_foo instead of printk
2014-11-02 12:32 [PATCHv2 00/14] Reduce cx231xx verbosity and do some cleanups Mauro Carvalho Chehab
` (8 preceding siblings ...)
2014-11-02 12:32 ` [PATCHv2 09/14] [media] cx231xx: get rid of audio debug parameter Mauro Carvalho Chehab
@ 2014-11-02 12:32 ` Mauro Carvalho Chehab
2014-11-02 12:32 ` [PATCHv2 11/14] [media] cx231xx: add addr for demod and make i2c_devs const Mauro Carvalho Chehab
` (4 subsequent siblings)
14 siblings, 0 replies; 18+ messages in thread
From: Mauro Carvalho Chehab @ 2014-11-02 12:32 UTC (permalink / raw)
To: Linux Media Mailing List
Cc: Mauro Carvalho Chehab, Mauro Carvalho Chehab, Matthias Schwarzott,
Hans Verkuil, Antti Palosaari
There are several places at cx231xx that uses printk without
any special reason. Change all of them to use dev_foo().
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
diff --git a/drivers/media/usb/cx231xx/cx231xx-avcore.c b/drivers/media/usb/cx231xx/cx231xx-avcore.c
index 9088a32db2d1..b299242a63dd 100644
--- a/drivers/media/usb/cx231xx/cx231xx-avcore.c
+++ b/drivers/media/usb/cx231xx/cx231xx-avcore.c
@@ -1208,7 +1208,8 @@ int cx231xx_set_audio_decoder_input(struct cx231xx *dev,
/* This is just a casual suggestion to people adding
new boards in case they use a tuner type we don't
currently know about */
- printk(KERN_INFO "Unknown tuner type configuring SIF");
+ dev_info(&dev->udev->dev,
+ "Unknown tuner type configuring SIF");
break;
}
break;
diff --git a/drivers/media/usb/cx231xx/cx231xx-cards.c b/drivers/media/usb/cx231xx/cx231xx-cards.c
index 2e8741314bce..7156344e7022 100644
--- a/drivers/media/usb/cx231xx/cx231xx-cards.c
+++ b/drivers/media/usb/cx231xx/cx231xx-cards.c
@@ -1216,11 +1216,11 @@ static int cx231xx_init_dev(struct cx231xx *dev, struct usb_device *udev,
cx231xx_add_into_devlist(dev);
if (dev->board.has_417) {
- printk(KERN_INFO "attach 417 %d\n", dev->model);
+ dev_info(&udev->dev, "attach 417 %d\n", dev->model);
if (cx231xx_417_register(dev) < 0) {
- printk(KERN_ERR
+ dev_err(&udev->dev,
"%s() Failed to register 417 on VID_B\n",
- __func__);
+ __func__);
}
}
diff --git a/drivers/media/usb/cx231xx/cx231xx-dvb.c b/drivers/media/usb/cx231xx/cx231xx-dvb.c
index 044ad353d09b..a0d40bda718d 100644
--- a/drivers/media/usb/cx231xx/cx231xx-dvb.c
+++ b/drivers/media/usb/cx231xx/cx231xx-dvb.c
@@ -45,11 +45,6 @@ MODULE_PARM_DESC(debug, "enable debug messages [dvb]");
DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
-#define dprintk(level, fmt, arg...) do { \
-if (debug >= level) \
- printk(KERN_DEBUG "%s/2-dvb: " fmt, dev->name, ## arg); \
-} while (0)
-
#define CX231XX_DVB_NUM_BUFS 5
#define CX231XX_DVB_MAX_PACKETSIZE 564
#define CX231XX_DVB_MAX_PACKETS 64
@@ -196,9 +191,11 @@ static inline void print_err_status(struct cx231xx *dev, int packet, int status)
break;
}
if (packet < 0) {
- dprintk(1, "URB status %d [%s].\n", status, errmsg);
+ dev_dbg(&dev->udev->dev,
+ "URB status %d [%s].\n", status, errmsg);
} else {
- dprintk(1, "URB packet %d, status %d [%s].\n",
+ dev_dbg(&dev->udev->dev,
+ "URB packet %d, status %d [%s].\n",
packet, status, errmsg);
}
}
@@ -377,20 +374,21 @@ static int attach_xc5000(u8 addr, struct cx231xx *dev)
cfg.i2c_addr = addr;
if (!dev->dvb->frontend) {
- printk(KERN_ERR "%s/2: dvb frontend not attached. "
+ dev_err(&dev->udev->dev, "%s/2: dvb frontend not attached. "
"Can't attach xc5000\n", dev->name);
return -EINVAL;
}
fe = dvb_attach(xc5000_attach, dev->dvb->frontend, &cfg);
if (!fe) {
- printk(KERN_ERR "%s/2: xc5000 attach failed\n", dev->name);
+ dev_err(&dev->udev->dev,
+ "%s/2: xc5000 attach failed\n", dev->name);
dvb_frontend_detach(dev->dvb->frontend);
dev->dvb->frontend = NULL;
return -EINVAL;
}
- printk(KERN_INFO "%s/2: xc5000 attached\n", dev->name);
+ dev_info(&dev->udev->dev, "%s/2: xc5000 attached\n", dev->name);
return 0;
}
@@ -462,7 +460,7 @@ static int register_dvb(struct cx231xx_dvb *dvb,
result = dvb_register_adapter(&dvb->adapter, dev->name, module, device,
adapter_nr);
if (result < 0) {
- printk(KERN_WARNING
+ dev_warn(&dev->udev->dev,
"%s: dvb_register_adapter failed (errno = %d)\n",
dev->name, result);
goto fail_adapter;
@@ -476,7 +474,7 @@ static int register_dvb(struct cx231xx_dvb *dvb,
/* register frontend */
result = dvb_register_frontend(&dvb->adapter, dvb->frontend);
if (result < 0) {
- printk(KERN_WARNING
+ dev_warn(&dev->udev->dev,
"%s: dvb_register_frontend failed (errno = %d)\n",
dev->name, result);
goto fail_frontend;
@@ -494,7 +492,8 @@ static int register_dvb(struct cx231xx_dvb *dvb,
result = dvb_dmx_init(&dvb->demux);
if (result < 0) {
- printk(KERN_WARNING "%s: dvb_dmx_init failed (errno = %d)\n",
+ dev_warn(&dev->udev->dev,
+ "%s: dvb_dmx_init failed (errno = %d)\n",
dev->name, result);
goto fail_dmx;
}
@@ -504,15 +503,16 @@ static int register_dvb(struct cx231xx_dvb *dvb,
dvb->dmxdev.capabilities = 0;
result = dvb_dmxdev_init(&dvb->dmxdev, &dvb->adapter);
if (result < 0) {
- printk(KERN_WARNING "%s: dvb_dmxdev_init failed (errno = %d)\n",
- dev->name, result);
+ dev_warn(&dev->udev->dev,
+ "%s: dvb_dmxdev_init failed (errno = %d)\n",
+ dev->name, result);
goto fail_dmxdev;
}
dvb->fe_hw.source = DMX_FRONTEND_0;
result = dvb->demux.dmx.add_frontend(&dvb->demux.dmx, &dvb->fe_hw);
if (result < 0) {
- printk(KERN_WARNING
+ dev_warn(&dev->udev->dev,
"%s: add_frontend failed (DMX_FRONTEND_0, errno = %d)\n",
dev->name, result);
goto fail_fe_hw;
@@ -521,17 +521,17 @@ static int register_dvb(struct cx231xx_dvb *dvb,
dvb->fe_mem.source = DMX_MEMORY_FE;
result = dvb->demux.dmx.add_frontend(&dvb->demux.dmx, &dvb->fe_mem);
if (result < 0) {
- printk(KERN_WARNING
- "%s: add_frontend failed (DMX_MEMORY_FE, errno = %d)\n",
- dev->name, result);
+ dev_warn(&dev->udev->dev,
+ "%s: add_frontend failed (DMX_MEMORY_FE, errno = %d)\n",
+ dev->name, result);
goto fail_fe_mem;
}
result = dvb->demux.dmx.connect_frontend(&dvb->demux.dmx, &dvb->fe_hw);
if (result < 0) {
- printk(KERN_WARNING
- "%s: connect_frontend failed (errno = %d)\n", dev->name,
- result);
+ dev_warn(&dev->udev->dev,
+ "%s: connect_frontend failed (errno = %d)\n",
+ dev->name, result);
goto fail_fe_conn;
}
@@ -590,7 +590,8 @@ static int dvb_init(struct cx231xx *dev)
dvb = kzalloc(sizeof(struct cx231xx_dvb), GFP_KERNEL);
if (dvb == NULL) {
- printk(KERN_INFO "cx231xx_dvb: memory allocation failed\n");
+ dev_info(&dev->udev->dev,
+ "cx231xx_dvb: memory allocation failed\n");
return -ENOMEM;
}
dev->dvb = dvb;
@@ -612,8 +613,8 @@ static int dvb_init(struct cx231xx *dev)
demod_i2c);
if (dev->dvb->frontend == NULL) {
- printk(DRIVER_NAME
- ": Failed to attach s5h1432 front end\n");
+ dev_err(&dev->udev->dev,
+ "Failed to attach s5h1432 front end\n");
result = -EINVAL;
goto out_free;
}
@@ -637,8 +638,8 @@ static int dvb_init(struct cx231xx *dev)
demod_i2c);
if (dev->dvb->frontend == NULL) {
- printk(DRIVER_NAME
- ": Failed to attach s5h1411 front end\n");
+ dev_err(&dev->udev->dev,
+ "Failed to attach s5h1411 front end\n");
result = -EINVAL;
goto out_free;
}
@@ -660,8 +661,8 @@ static int dvb_init(struct cx231xx *dev)
demod_i2c);
if (dev->dvb->frontend == NULL) {
- printk(DRIVER_NAME
- ": Failed to attach s5h1432 front end\n");
+ dev_err(&dev->udev->dev,
+ "Failed to attach s5h1432 front end\n");
result = -EINVAL;
goto out_free;
}
@@ -684,8 +685,8 @@ static int dvb_init(struct cx231xx *dev)
demod_i2c);
if (dev->dvb->frontend == NULL) {
- printk(DRIVER_NAME
- ": Failed to attach s5h1411 front end\n");
+ dev_err(&dev->udev->dev,
+ "Failed to attach s5h1411 front end\n");
result = -EINVAL;
goto out_free;
}
@@ -702,7 +703,8 @@ static int dvb_init(struct cx231xx *dev)
break;
case CX231XX_BOARD_HAUPPAUGE_EXETER:
- printk(KERN_INFO "%s: looking for tuner / demod on i2c bus: %d\n",
+ dev_info(&dev->udev->dev,
+ "%s: looking for tuner / demod on i2c bus: %d\n",
__func__, i2c_adapter_id(tuner_i2c));
dev->dvb->frontend = dvb_attach(lgdt3305_attach,
@@ -710,8 +712,8 @@ static int dvb_init(struct cx231xx *dev)
tuner_i2c);
if (dev->dvb->frontend == NULL) {
- printk(DRIVER_NAME
- ": Failed to attach LG3305 front end\n");
+ dev_err(&dev->udev->dev,
+ "Failed to attach LG3305 front end\n");
result = -EINVAL;
goto out_free;
}
@@ -732,8 +734,8 @@ static int dvb_init(struct cx231xx *dev)
);
if (dev->dvb->frontend == NULL) {
- printk(DRIVER_NAME
- ": Failed to attach SI2165 front end\n");
+ dev_err(&dev->udev->dev,
+ "Failed to attach SI2165 front end\n");
result = -EINVAL;
goto out_free;
}
@@ -765,8 +767,8 @@ static int dvb_init(struct cx231xx *dev)
);
if (dev->dvb->frontend == NULL) {
- printk(DRIVER_NAME
- ": Failed to attach SI2165 front end\n");
+ dev_err(&dev->udev->dev,
+ "Failed to attach SI2165 front end\n");
result = -EINVAL;
goto out_free;
}
@@ -810,16 +812,17 @@ static int dvb_init(struct cx231xx *dev)
case CX231XX_BOARD_PV_PLAYTV_USB_HYBRID:
case CX231XX_BOARD_KWORLD_UB430_USB_HYBRID:
- printk(KERN_INFO "%s: looking for demod on i2c bus: %d\n",
- __func__, i2c_adapter_id(tuner_i2c));
+ dev_info(&dev->udev->dev,
+ "%s: looking for demod on i2c bus: %d\n",
+ __func__, i2c_adapter_id(tuner_i2c));
dev->dvb->frontend = dvb_attach(mb86a20s_attach,
&pv_mb86a20s_config,
demod_i2c);
if (dev->dvb->frontend == NULL) {
- printk(DRIVER_NAME
- ": Failed to attach mb86a20s demod\n");
+ dev_err(&dev->udev->dev,
+ "Failed to attach mb86a20s demod\n");
result = -EINVAL;
goto out_free;
}
@@ -833,12 +836,13 @@ static int dvb_init(struct cx231xx *dev)
break;
default:
- printk(KERN_ERR "%s/2: The frontend of your DVB/ATSC card"
- " isn't supported yet\n", dev->name);
+ dev_err(&dev->udev->dev,
+ "%s/2: The frontend of your DVB/ATSC card isn't supported yet\n",
+ dev->name);
break;
}
if (NULL == dvb->frontend) {
- printk(KERN_ERR
+ dev_err(&dev->udev->dev,
"%s/2: frontend initialization failed\n", dev->name);
result = -EINVAL;
goto out_free;
@@ -851,7 +855,7 @@ static int dvb_init(struct cx231xx *dev)
goto out_free;
- printk(KERN_INFO "Successfully loaded cx231xx-dvb\n");
+ dev_info(&dev->udev->dev, "Successfully loaded cx231xx-dvb\n");
ret:
cx231xx_set_mode(dev, CX231XX_SUSPEND);
--
1.9.3
^ permalink raw reply related [flat|nested] 18+ messages in thread* [PATCHv2 11/14] [media] cx231xx: add addr for demod and make i2c_devs const
2014-11-02 12:32 [PATCHv2 00/14] Reduce cx231xx verbosity and do some cleanups Mauro Carvalho Chehab
` (9 preceding siblings ...)
2014-11-02 12:32 ` [PATCHv2 10/14] [media] cx231xx: use dev_foo instead of printk Mauro Carvalho Chehab
@ 2014-11-02 12:32 ` Mauro Carvalho Chehab
2014-11-02 12:32 ` [PATCHv2 12/14] [media] cx231xx: use dev_info() for extension load/unload Mauro Carvalho Chehab
` (3 subsequent siblings)
14 siblings, 0 replies; 18+ messages in thread
From: Mauro Carvalho Chehab @ 2014-11-02 12:32 UTC (permalink / raw)
To: Linux Media Mailing List
Cc: Mauro Carvalho Chehab, Mauro Carvalho Chehab, Matthias Schwarzott,
Antti Palosaari, Hans Verkuil
I2C address 0x10 is the demod. While here, make the array const.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
diff --git a/drivers/media/usb/cx231xx/cx231xx-i2c.c b/drivers/media/usb/cx231xx/cx231xx-i2c.c
index c4dc13afbe05..87b26157cad0 100644
--- a/drivers/media/usb/cx231xx/cx231xx-i2c.c
+++ b/drivers/media/usb/cx231xx/cx231xx-i2c.c
@@ -471,7 +471,8 @@ static struct i2c_adapter cx231xx_adap_template = {
* i2c_devs
* incomplete list of known devices
*/
-static char *i2c_devs[128] = {
+static const char *i2c_devs[128] = {
+ [0x20 >> 1] = "demod",
[0x60 >> 1] = "colibri",
[0x88 >> 1] = "hammerhead",
[0x8e >> 1] = "CIR",
--
1.9.3
^ permalink raw reply related [flat|nested] 18+ messages in thread* [PATCHv2 12/14] [media] cx231xx: use dev_info() for extension load/unload
2014-11-02 12:32 [PATCHv2 00/14] Reduce cx231xx verbosity and do some cleanups Mauro Carvalho Chehab
` (10 preceding siblings ...)
2014-11-02 12:32 ` [PATCHv2 11/14] [media] cx231xx: add addr for demod and make i2c_devs const Mauro Carvalho Chehab
@ 2014-11-02 12:32 ` Mauro Carvalho Chehab
2014-11-02 17:32 ` Antti Palosaari
2014-11-02 12:32 ` [PATCHv2 13/14] [media] cx231xx: too much changes. Bump version number Mauro Carvalho Chehab
` (2 subsequent siblings)
14 siblings, 1 reply; 18+ messages in thread
From: Mauro Carvalho Chehab @ 2014-11-02 12:32 UTC (permalink / raw)
To: Linux Media Mailing List
Cc: Mauro Carvalho Chehab, Mauro Carvalho Chehab, Matthias Schwarzott,
Antti Palosaari, Hans Verkuil
Now that we're using dev_foo, the logs become like:
usb 1-2: DVB: registering adapter 0 frontend 0 (Fujitsu mb86A20s)...
usb 1-2: Successfully loaded cx231xx-dvb
cx231xx: Cx231xx dvb Extension initialized
It is not clear, by the logs, that usb 1-2 name is an alias for
cx231xx. So, we also need to use dvb_info() at extension load/unload.
After the patch, it will print:
usb 1-2: Cx231xx dvb Extension initialized
With is coherent with the other logs.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
diff --git a/drivers/media/usb/cx231xx/cx231xx-core.c b/drivers/media/usb/cx231xx/cx231xx-core.c
index 36c3ecf204c1..64e907f02a02 100644
--- a/drivers/media/usb/cx231xx/cx231xx-core.c
+++ b/drivers/media/usb/cx231xx/cx231xx-core.c
@@ -98,10 +98,10 @@ int cx231xx_register_extension(struct cx231xx_ops *ops)
mutex_lock(&cx231xx_devlist_mutex);
list_add_tail(&ops->next, &cx231xx_extension_devlist);
- list_for_each_entry(dev, &cx231xx_devlist, devlist)
+ list_for_each_entry(dev, &cx231xx_devlist, devlist) {
ops->init(dev);
-
- printk(KERN_INFO DRIVER_NAME ": %s initialized\n", ops->name);
+ dev_info(&dev->udev->dev, "%s initialized\n", ops->name);
+ }
mutex_unlock(&cx231xx_devlist_mutex);
return 0;
}
@@ -112,11 +112,11 @@ void cx231xx_unregister_extension(struct cx231xx_ops *ops)
struct cx231xx *dev = NULL;
mutex_lock(&cx231xx_devlist_mutex);
- list_for_each_entry(dev, &cx231xx_devlist, devlist)
+ list_for_each_entry(dev, &cx231xx_devlist, devlist) {
ops->fini(dev);
+ dev_info(&dev->udev->dev, "%s removed\n", ops->name);
+ }
-
- printk(KERN_INFO DRIVER_NAME ": %s removed\n", ops->name);
list_del(&ops->next);
mutex_unlock(&cx231xx_devlist_mutex);
}
--
1.9.3
^ permalink raw reply related [flat|nested] 18+ messages in thread* Re: [PATCHv2 12/14] [media] cx231xx: use dev_info() for extension load/unload
2014-11-02 12:32 ` [PATCHv2 12/14] [media] cx231xx: use dev_info() for extension load/unload Mauro Carvalho Chehab
@ 2014-11-02 17:32 ` Antti Palosaari
2014-11-03 8:51 ` Mauro Carvalho Chehab
0 siblings, 1 reply; 18+ messages in thread
From: Antti Palosaari @ 2014-11-02 17:32 UTC (permalink / raw)
To: Mauro Carvalho Chehab, Linux Media Mailing List
Cc: Mauro Carvalho Chehab, Matthias Schwarzott, Hans Verkuil
On 11/02/2014 02:32 PM, Mauro Carvalho Chehab wrote:
> Now that we're using dev_foo, the logs become like:
>
> usb 1-2: DVB: registering adapter 0 frontend 0 (Fujitsu mb86A20s)...
> usb 1-2: Successfully loaded cx231xx-dvb
> cx231xx: Cx231xx dvb Extension initialized
>
> It is not clear, by the logs, that usb 1-2 name is an alias for
> cx231xx. So, we also need to use dvb_info() at extension load/unload.
>
> After the patch, it will print:
> usb 1-2: Cx231xx dvb Extension initialized
>
> With is coherent with the other logs.
That is not correct as wrong device pointer passed to dev_. Go cx231xx
usb driver probe function and add following test log to see how is
should look like:
dev_info(&intf->dev, "Hello World\n");
It prints something like
cx231xx 1-2-1: Hello World
regards
Antti
>
> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
>
> diff --git a/drivers/media/usb/cx231xx/cx231xx-core.c b/drivers/media/usb/cx231xx/cx231xx-core.c
> index 36c3ecf204c1..64e907f02a02 100644
> --- a/drivers/media/usb/cx231xx/cx231xx-core.c
> +++ b/drivers/media/usb/cx231xx/cx231xx-core.c
> @@ -98,10 +98,10 @@ int cx231xx_register_extension(struct cx231xx_ops *ops)
>
> mutex_lock(&cx231xx_devlist_mutex);
> list_add_tail(&ops->next, &cx231xx_extension_devlist);
> - list_for_each_entry(dev, &cx231xx_devlist, devlist)
> + list_for_each_entry(dev, &cx231xx_devlist, devlist) {
> ops->init(dev);
> -
> - printk(KERN_INFO DRIVER_NAME ": %s initialized\n", ops->name);
> + dev_info(&dev->udev->dev, "%s initialized\n", ops->name);
> + }
> mutex_unlock(&cx231xx_devlist_mutex);
> return 0;
> }
> @@ -112,11 +112,11 @@ void cx231xx_unregister_extension(struct cx231xx_ops *ops)
> struct cx231xx *dev = NULL;
>
> mutex_lock(&cx231xx_devlist_mutex);
> - list_for_each_entry(dev, &cx231xx_devlist, devlist)
> + list_for_each_entry(dev, &cx231xx_devlist, devlist) {
> ops->fini(dev);
> + dev_info(&dev->udev->dev, "%s removed\n", ops->name);
> + }
>
> -
> - printk(KERN_INFO DRIVER_NAME ": %s removed\n", ops->name);
> list_del(&ops->next);
> mutex_unlock(&cx231xx_devlist_mutex);
> }
>
--
http://palosaari.fi/
^ permalink raw reply [flat|nested] 18+ messages in thread* Re: [PATCHv2 12/14] [media] cx231xx: use dev_info() for extension load/unload
2014-11-02 17:32 ` Antti Palosaari
@ 2014-11-03 8:51 ` Mauro Carvalho Chehab
0 siblings, 0 replies; 18+ messages in thread
From: Mauro Carvalho Chehab @ 2014-11-03 8:51 UTC (permalink / raw)
To: Antti Palosaari
Cc: Linux Media Mailing List, Mauro Carvalho Chehab,
Matthias Schwarzott, Hans Verkuil
Em Sun, 02 Nov 2014 19:32:37 +0200
Antti Palosaari <crope@iki.fi> escreveu:
>
>
> On 11/02/2014 02:32 PM, Mauro Carvalho Chehab wrote:
> > Now that we're using dev_foo, the logs become like:
> >
> > usb 1-2: DVB: registering adapter 0 frontend 0 (Fujitsu mb86A20s)...
> > usb 1-2: Successfully loaded cx231xx-dvb
> > cx231xx: Cx231xx dvb Extension initialized
> >
> > It is not clear, by the logs, that usb 1-2 name is an alias for
> > cx231xx. So, we also need to use dvb_info() at extension load/unload.
> >
> > After the patch, it will print:
> > usb 1-2: Cx231xx dvb Extension initialized
> >
> > With is coherent with the other logs.
>
>
> That is not correct as wrong device pointer passed to dev_. Go cx231xx
> usb driver probe function and add following test log to see how is
> should look like:
> dev_info(&intf->dev, "Hello World\n");
I changed the probe to be:
static int cx231xx_usb_probe(struct usb_interface *interface,
const struct usb_device_id *id)
{
struct usb_device *udev;
...
struct usb_interface_assoc_descriptor *assoc_desc;
udev = usb_get_dev(interface_to_usbdev(interface));
ifnum = interface->altsetting[0].desc.bInterfaceNumber;
dev_info(&interface->dev, "intf Hello World\n");
dev_info(&udev->dev, "udev Hello World\n");
The result is:
[54915.036082] cx231xx 1-2:1.2: intf Hello World
[54915.036090] usb 1-2: udev Hello World
[54915.036163] cx231xx 1-2:1.3: intf Hello World
[54915.036171] usb 1-2: udev Hello World
[54915.036197] cx231xx 1-2:1.4: intf Hello World
[54915.036204] usb 1-2: udev Hello World
[54915.036228] cx231xx 1-2:1.5: intf Hello World
[54915.036234] usb 1-2: udev Hello World
[54915.036258] cx231xx 1-2:1.6: intf Hello World
[54915.036264] usb 1-2: udev Hello World
Devices with multiple interfaces seem to have intf->dev filled with
a different device than udev->dev. The cx231xx is likely the most
complex device we have at media, as it has lots of interfaces, each
with lots of alternates, plus its 3 I2C physical buses and one I2C
mux internally.
I may work on a patch that would be storing intf->dev into
cx231xx dev struct. That's probably the easiest way for this
device.
Do you have any other idea?
Regards,
Mauro
^ permalink raw reply [flat|nested] 18+ messages in thread
* [PATCHv2 13/14] [media] cx231xx: too much changes. Bump version number
2014-11-02 12:32 [PATCHv2 00/14] Reduce cx231xx verbosity and do some cleanups Mauro Carvalho Chehab
` (11 preceding siblings ...)
2014-11-02 12:32 ` [PATCHv2 12/14] [media] cx231xx: use dev_info() for extension load/unload Mauro Carvalho Chehab
@ 2014-11-02 12:32 ` Mauro Carvalho Chehab
2014-11-02 12:32 ` [PATCHv2 14/14] [media] cx231xx: simplify I2C scan debug messages Mauro Carvalho Chehab
2014-11-02 12:37 ` [PATCHv2 00/14] Reduce cx231xx verbosity and do some cleanups Mauro Carvalho Chehab
14 siblings, 0 replies; 18+ messages in thread
From: Mauro Carvalho Chehab @ 2014-11-02 12:32 UTC (permalink / raw)
To: Linux Media Mailing List
Cc: Mauro Carvalho Chehab, Mauro Carvalho Chehab, Hans Verkuil,
Laurent Pinchart, Prabhakar Lad, Sakari Ailus,
Ramakrishnan Muthukrishnan, Peter Senna Tschudin
The I2C mux changes are significant. Bump version number.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
diff --git a/drivers/media/usb/cx231xx/cx231xx-video.c b/drivers/media/usb/cx231xx/cx231xx-video.c
index 5ea8124f5d20..c5b5e9541669 100644
--- a/drivers/media/usb/cx231xx/cx231xx-video.c
+++ b/drivers/media/usb/cx231xx/cx231xx-video.c
@@ -43,7 +43,7 @@
#include "cx231xx-vbi.h"
-#define CX231XX_VERSION "0.0.2"
+#define CX231XX_VERSION "0.0.3"
#define DRIVER_AUTHOR "Srinivasa Deevi <srinivasa.deevi@conexant.com>"
#define DRIVER_DESC "Conexant cx231xx based USB video device driver"
--
1.9.3
^ permalink raw reply related [flat|nested] 18+ messages in thread* [PATCHv2 14/14] [media] cx231xx: simplify I2C scan debug messages
2014-11-02 12:32 [PATCHv2 00/14] Reduce cx231xx verbosity and do some cleanups Mauro Carvalho Chehab
` (12 preceding siblings ...)
2014-11-02 12:32 ` [PATCHv2 13/14] [media] cx231xx: too much changes. Bump version number Mauro Carvalho Chehab
@ 2014-11-02 12:32 ` Mauro Carvalho Chehab
2014-11-02 12:37 ` [PATCHv2 00/14] Reduce cx231xx verbosity and do some cleanups Mauro Carvalho Chehab
14 siblings, 0 replies; 18+ messages in thread
From: Mauro Carvalho Chehab @ 2014-11-02 12:32 UTC (permalink / raw)
To: Linux Media Mailing List
Cc: Mauro Carvalho Chehab, Mauro Carvalho Chehab, Matthias Schwarzott,
Antti Palosaari, Hans Verkuil
Don't need to show when it starts or stops. Just print lines
when devices are found.
After the changes, the output for i2c scan will be like:
usb 1-2: i2c scan: found device @ port 0 addr 0x40 [???]
usb 1-2: i2c scan: found device @ port 0 addr 0x60 [colibri]
usb 1-2: i2c scan: found device @ port 0 addr 0x88 [hammerhead]
usb 1-2: i2c scan: found device @ port 0 addr 0x98 [???]
usb 1-2: i2c scan: found device @ port 3 addr 0xa0 [eeprom]
usb 1-2: i2c scan: found device @ port 2 addr 0x60 [colibri]
usb 1-2: i2c scan: found device @ port 2 addr 0xc0 [tuner]
usb 1-2: i2c scan: found device @ port 4 addr 0x20 [demod]
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
diff --git a/drivers/media/usb/cx231xx/cx231xx-i2c.c b/drivers/media/usb/cx231xx/cx231xx-i2c.c
index 87b26157cad0..7ccc33d33664 100644
--- a/drivers/media/usb/cx231xx/cx231xx-i2c.c
+++ b/drivers/media/usb/cx231xx/cx231xx-i2c.c
@@ -502,21 +502,17 @@ void cx231xx_do_i2c_scan(struct cx231xx *dev, int i2c_port)
memset(&client, 0, sizeof(client));
client.adapter = cx231xx_get_i2c_adap(dev, i2c_port);
- dev_info(&dev->udev->dev,
- "i2c_scan: checking for I2C devices on port=%d ..\n",
- i2c_port);
for (i = 0; i < 128; i++) {
client.addr = i;
rc = i2c_master_recv(&client, &buf, 0);
if (rc < 0)
continue;
dev_info(&dev->udev->dev,
- "i2c scan: found device @ 0x%x [%s]\n",
+ "i2c scan: found device @ port %d addr 0x%x [%s]\n",
+ i2c_port,
i << 1,
i2c_devs[i] ? i2c_devs[i] : "???");
}
- dev_info(&dev->udev->dev, "i2c scan: Completed Checking for I2C devices on port=%d.\n",
- i2c_port);
dev->i2c_scan_running = false;
}
--
1.9.3
^ permalink raw reply related [flat|nested] 18+ messages in thread* Re: [PATCHv2 00/14] Reduce cx231xx verbosity and do some cleanups
2014-11-02 12:32 [PATCHv2 00/14] Reduce cx231xx verbosity and do some cleanups Mauro Carvalho Chehab
` (13 preceding siblings ...)
2014-11-02 12:32 ` [PATCHv2 14/14] [media] cx231xx: simplify I2C scan debug messages Mauro Carvalho Chehab
@ 2014-11-02 12:37 ` Mauro Carvalho Chehab
14 siblings, 0 replies; 18+ messages in thread
From: Mauro Carvalho Chehab @ 2014-11-02 12:37 UTC (permalink / raw)
To: Linux Media Mailing List; +Cc: Mauro Carvalho Chehab
Em Sun, 02 Nov 2014 10:32:23 -0200
Mauro Carvalho Chehab <mchehab@osg.samsung.com> escreveu:
> The cx231xx driver is too verbose. Several debug messages
> are sent to dmesg. Do some cleanup and fix i2c_scan.
>
> After this patch, it will now produce:
>
> [ 608.359255] usb 1-2: New device Conexant Corporation Polaris AV Capturb @ 480 Mbps (1554:5010) with 7 interfaces
> [ 608.360009] usb 1-2: Identified as Pixelview PlayTV USB Hybrid (card=10)
> [ 608.363129] i2c i2c-8: Added multiplexed i2c bus 10
> [ 608.363201] i2c i2c-8: Added multiplexed i2c bus 11
> [ 610.968904] cx25840 7-0044: loaded v4l-cx231xx-avcore-01.fw firmware (16382 bytes)
> [ 611.041317] Chip ID is not zero. It is not a TEA5767
> [ 611.041351] tuner 9-0060: Tuner -1 found with type(s) Radio TV.
> [ 611.041429] tda18271 9-0060: creating new instance
> [ 611.044096] TDA18271HD/C2 detected @ 9-0060
> [ 611.239460] tda18271: performing RF tracking filter calibration
> [ 612.800569] tda18271: RF tracking filter calibration complete
> [ 612.835365] usb 1-2: v4l2 driver version 0.0.3
> [ 613.055006] usb 1-2: Registered video device video0 [v4l2]
> [ 613.055461] usb 1-2: Registered VBI device vbi0
> [ 613.110279] Registered IR keymap rc-pixelview-002t
> [ 613.110574] input: i2c IR (Pixelview PlayTV USB Hy as /devices/virtual/rc/rc0/input12
> [ 613.111398] rc0: i2c IR (Pixelview PlayTV USB Hy as /devices/virtual/rc/rc0
> [ 613.111409] ir-kbd-i2c: i2c IR (Pixelview PlayTV USB Hy detected at i2c-9/9-0030/ir0 [cx231xx #0-2]
> [ 613.111444] usb 1-2: video EndPoint Addr 0x84, Alternate settings: 5
> [ 613.111454] usb 1-2: VBI EndPoint Addr 0x85, Alternate settings: 2
> [ 613.111465] usb 1-2: sliced CC EndPoint Addr 0x86, Alternate settings: 2
> [ 613.111474] usb 1-2: TS EndPoint Addr 0x81, Alternate settings: 6
> [ 613.111654] usbcore: registered new interface driver cx231xx
> [ 613.136510] usb 1-2: audio EndPoint Addr 0x83, Alternate settings: 3
> [ 613.136521] usb 1-2: Cx231xx Audio Extension initialized
> [ 613.199085] usb 1-2: dvb_init: looking for demod on i2c bus: 9
> [ 613.232349] i2c i2c-11: Detected a Fujitsu mb86a20s frontend
> [ 613.232385] tda18271 9-0060: attaching existing instance
> [ 613.232392] DVB: registering new adapter (cx231xx #0)
> [ 613.232402] usb 1-2: DVB: registering adapter 0 frontend 0 (Fujitsu mb86A20s)...
> [ 613.234528] usb 1-2: Successfully loaded cx231xx-dvb
> [ 613.234618] usb 1-2: Cx231xx dvb Extension initialized
>
> Still verbose, but at least it doesn't produce extra logs during normal
> work.
>
> I2C scan is now fixed and not too verbose:
>
> [ 608.371656] usb 1-2: i2c scan: found device @ port 0 addr 0x40 [???]
> [ 608.374750] usb 1-2: i2c scan: found device @ port 0 addr 0x60 [colibri]
> [ 608.378433] usb 1-2: i2c scan: found device @ port 0 addr 0x88 [hammerhead]
> [ 608.380226] usb 1-2: i2c scan: found device @ port 0 addr 0x98 [???]
> [ 608.405747] usb 1-2: i2c scan: found device @ port 3 addr 0xa0 [eeprom]
> [ 608.422310] usb 1-2: i2c scan: found device @ port 2 addr 0x60 [colibri]
> [ 608.430229] usb 1-2: i2c scan: found device @ port 2 addr 0xc0 [tuner]
> [ 608.438793] usb 1-2: i2c scan: found device @ port 4 addr 0x20 [demod]
> [ 608.560247] cx25840 7-0044: cx23102 A/V decoder found @ 0x88 (cx231xx #0-0)
In time:
Too much cut-and-paste... the above line is shown even if i2c_scan parameter
is not used ;)
Regards,
Mauro
^ permalink raw reply [flat|nested] 18+ messages in thread