From: Marc Kleine-Budde <mkl@pengutronix.de>
To: Roger Quadros <rogerq@ti.com>, wg@grandegger.com
Cc: wsa@the-dreams.de, tony@atomide.com, tglx@linutronix.de,
mugunthanvnm@ti.com, george.cherian@ti.com, balbi@ti.com,
nsekhar@ti.comnm@ti.com, sergei.shtylyov@cogentembedded.com,
linux-omap@vger.kernel.org, linux-can@vger.kernel.org,
netdev@vger.kernel.org
Subject: Re: [PATCH v3 6/8] net: can: c_can: Disable pins when CAN interface is down
Date: Wed, 05 Nov 2014 14:24:33 +0100 [thread overview]
Message-ID: <545A2511.2090205@pengutronix.de> (raw)
In-Reply-To: <1415096461-25576-7-git-send-email-rogerq@ti.com>
[-- Attachment #1: Type: text/plain, Size: 1917 bytes --]
On 11/04/2014 11:20 AM, Roger Quadros wrote:
> DRA7 CAN IP suffers from a problem which causes it to be prevented
> from fully turning OFF (i.e. stuck in transition) if the module was
> disabled while there was traffic on the CAN_RX line.
>
> To work around this issue we select the SLEEP pin state by default
> on probe and use the DEFAULT pin state on CAN up and back to the
> SLEEP pin state on CAN down.
>
> Signed-off-by: Roger Quadros <rogerq@ti.com>
> ---
> drivers/net/can/c_can/c_can.c | 20 ++++++++++++++++++++
> drivers/net/can/c_can/c_can.h | 1 +
> drivers/net/can/c_can/c_can_platform.c | 20 ++++++++++++++++++++
> 3 files changed, 41 insertions(+)
>
> diff --git a/drivers/net/can/c_can/c_can.c b/drivers/net/can/c_can/c_can.c
> index 8e78bb4..4dfc3ce 100644
> --- a/drivers/net/can/c_can/c_can.c
> +++ b/drivers/net/can/c_can/c_can.c
> @@ -35,6 +35,7 @@
> #include <linux/list.h>
> #include <linux/io.h>
> #include <linux/pm_runtime.h>
> +#include <linux/pinctrl/consumer.h>
>
> #include <linux/can.h>
> #include <linux/can/dev.h>
> @@ -603,6 +604,15 @@ static int c_can_start(struct net_device *dev)
>
> priv->can.state = CAN_STATE_ERROR_ACTIVE;
>
> + /* activate pins */
> + if (!IS_ERR(priv->pinctrl)) {
> + struct pinctrl_state *s;
> +
> + s = pinctrl_lookup_state(priv->pinctrl, PINCTRL_STATE_DEFAULT);
> + if (!IS_ERR(s))
> + pinctrl_select_state(priv->pinctrl, s);
> + }
Can you factor this into a common function? Which is used like this:
c_can_pinctrl_select_state(priv, PINCTRL_STATE_DEFAULT)
Otherwise looks god.
Marc
--
Pengutronix e.K. | Marc Kleine-Budde |
Industrial Linux Solutions | Phone: +49-231-2826-924 |
Vertretung West/Dortmund | Fax: +49-5121-206917-5555 |
Amtsgericht Hildesheim, HRA 2686 | http://www.pengutronix.de |
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 819 bytes --]
WARNING: multiple messages have this Message-ID (diff)
From: Marc Kleine-Budde <mkl@pengutronix.de>
To: Roger Quadros <rogerq@ti.com>, wg@grandegger.com
Cc: wsa@the-dreams.de, tony@atomide.com, tglx@linutronix.de,
mugunthanvnm@ti.com, george.cherian@ti.com, balbi@ti.com,
nsekhar@ti.com, nm@ti.com, sergei.shtylyov@cogentembedded.com,
linux-omap@vger.kernel.org, linux-can@vger.kernel.org,
netdev@vger.kernel.org
Subject: Re: [PATCH v3 6/8] net: can: c_can: Disable pins when CAN interface is down
Date: Wed, 05 Nov 2014 14:24:33 +0100 [thread overview]
Message-ID: <545A2511.2090205@pengutronix.de> (raw)
In-Reply-To: <1415096461-25576-7-git-send-email-rogerq@ti.com>
[-- Attachment #1: Type: text/plain, Size: 1917 bytes --]
On 11/04/2014 11:20 AM, Roger Quadros wrote:
> DRA7 CAN IP suffers from a problem which causes it to be prevented
> from fully turning OFF (i.e. stuck in transition) if the module was
> disabled while there was traffic on the CAN_RX line.
>
> To work around this issue we select the SLEEP pin state by default
> on probe and use the DEFAULT pin state on CAN up and back to the
> SLEEP pin state on CAN down.
>
> Signed-off-by: Roger Quadros <rogerq@ti.com>
> ---
> drivers/net/can/c_can/c_can.c | 20 ++++++++++++++++++++
> drivers/net/can/c_can/c_can.h | 1 +
> drivers/net/can/c_can/c_can_platform.c | 20 ++++++++++++++++++++
> 3 files changed, 41 insertions(+)
>
> diff --git a/drivers/net/can/c_can/c_can.c b/drivers/net/can/c_can/c_can.c
> index 8e78bb4..4dfc3ce 100644
> --- a/drivers/net/can/c_can/c_can.c
> +++ b/drivers/net/can/c_can/c_can.c
> @@ -35,6 +35,7 @@
> #include <linux/list.h>
> #include <linux/io.h>
> #include <linux/pm_runtime.h>
> +#include <linux/pinctrl/consumer.h>
>
> #include <linux/can.h>
> #include <linux/can/dev.h>
> @@ -603,6 +604,15 @@ static int c_can_start(struct net_device *dev)
>
> priv->can.state = CAN_STATE_ERROR_ACTIVE;
>
> + /* activate pins */
> + if (!IS_ERR(priv->pinctrl)) {
> + struct pinctrl_state *s;
> +
> + s = pinctrl_lookup_state(priv->pinctrl, PINCTRL_STATE_DEFAULT);
> + if (!IS_ERR(s))
> + pinctrl_select_state(priv->pinctrl, s);
> + }
Can you factor this into a common function? Which is used like this:
c_can_pinctrl_select_state(priv, PINCTRL_STATE_DEFAULT)
Otherwise looks god.
Marc
--
Pengutronix e.K. | Marc Kleine-Budde |
Industrial Linux Solutions | Phone: +49-231-2826-924 |
Vertretung West/Dortmund | Fax: +49-5121-206917-5555 |
Amtsgericht Hildesheim, HRA 2686 | http://www.pengutronix.de |
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 819 bytes --]
next prev parent reply other threads:[~2014-11-05 13:24 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-11-04 10:20 [PATCH v3 0/8] net: can: Use syscon regmap for TI specific RAMINIT register Roger Quadros
2014-11-04 10:20 ` Roger Quadros
2014-11-04 10:20 ` [PATCH v3 1/8] net: can: c_can: Add timeout to c_can_hw_raminit_ti() Roger Quadros
2014-11-04 10:20 ` Roger Quadros
2014-11-04 10:20 ` [PATCH v3 2/8] net: can: c_can: Introduce c_can_driver_data structure Roger Quadros
2014-11-04 10:20 ` Roger Quadros
2014-11-04 10:20 ` [PATCH v3 3/8] net: can: c_can: Add RAMINIT register information to driver data Roger Quadros
2014-11-04 10:20 ` Roger Quadros
2014-11-04 10:20 ` [PATCH v3 4/8] net: can: c_can: Add syscon/regmap RAMINIT mechanism Roger Quadros
2014-11-04 10:20 ` Roger Quadros
2014-11-05 11:37 ` Roger Quadros
2014-11-05 11:37 ` Roger Quadros
2014-11-04 10:20 ` [PATCH v3 5/8] net: can: c_can: Add support for START pulse in RAMINIT sequence Roger Quadros
2014-11-04 10:20 ` Roger Quadros
2014-11-04 10:20 ` [PATCH v3 6/8] net: can: c_can: Disable pins when CAN interface is down Roger Quadros
2014-11-04 10:20 ` Roger Quadros
2014-11-05 13:24 ` Marc Kleine-Budde [this message]
2014-11-05 13:24 ` Marc Kleine-Budde
2014-11-05 13:33 ` Roger Quadros
2014-11-05 13:33 ` Roger Quadros
2014-11-04 10:21 ` [PATCH v3 7/8] net: can: c_can: Add support for TI DRA7 DCAN Roger Quadros
2014-11-04 10:21 ` Roger Quadros
2014-11-05 13:30 ` Marc Kleine-Budde
2014-11-05 13:30 ` Marc Kleine-Budde
2014-11-05 13:36 ` Roger Quadros
2014-11-05 13:36 ` Roger Quadros
2014-11-05 13:43 ` Marc Kleine-Budde
2014-11-05 13:43 ` Marc Kleine-Budde
2014-11-04 10:21 ` [PATCH v3 8/8] net: can: c_can: Add support for TI am3352 DCAN Roger Quadros
2014-11-04 10:21 ` Roger Quadros
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=545A2511.2090205@pengutronix.de \
--to=mkl@pengutronix.de \
--cc=balbi@ti.com \
--cc=george.cherian@ti.com \
--cc=mugunthanvnm@ti.com \
--cc=nsekhar@ti.comnm \
--cc=rogerq@ti.com \
--cc=tglx@linutronix.de \
--cc=tony@atomide.com \
--cc=wg@grandegger.com \
--cc=wsa@the-dreams.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.