From: Gregory CLEMENT <gregory.clement@free-electrons.com>
To: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Cc: Wim Van Sebroeck <wim@iguana.be>,
Daniel Lezcano <daniel.lezcano@linaro.org>,
linux-watchdog@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
Jason Cooper <jason@lakedaemon.net>,
Thomas Petazzoni <thomas.petazzoni@free-electrons.com>,
Tawfik Bayouk <tawfik@marvell.com>,
Lior Amsalem <alior@marvell.com>, Andrew Lunn <andrew@lunn.ch>,
Nadav Haklai <nadavh@marvell.com>
Subject: Re: [PATCH v3 2/3] watchdog: orion: Use the reference clock on Armada 375 SoC
Date: Mon, 10 Nov 2014 15:41:52 +0100 [thread overview]
Message-ID: <5460CEB0.7080009@free-electrons.com> (raw)
In-Reply-To: <1415107293-19258-3-git-send-email-ezequiel.garcia@free-electrons.com>
Hi Ezequiel,
[...]
> +static int armada375_wdt_clock_init(struct platform_device *pdev,
> + struct orion_watchdog *dev)
> +{
> + int ret;
> +
> + dev->clk = of_clk_get_by_name(pdev->dev.of_node, "fixed");
> + if (!IS_ERR(dev->clk)) {
> + ret = clk_prepare_enable(dev->clk);
> + if (ret) {
> + clk_put(dev->clk);
> + return ret;
> + }
> +
> + atomic_io_modify(dev->reg + TIMER_CTRL,
> + WDT_AXP_FIXED_ENABLE_BIT,
> + WDT_AXP_FIXED_ENABLE_BIT);
> + dev->clk_rate = clk_get_rate(dev->clk);
> +
> + return 0;
> + }
> +
> + /* Mandatory fallback for proper devicetree backward compatibility */
> + dev->clk = clk_get(&pdev->dev, NULL);
> + if (IS_ERR(dev->clk))
> + return PTR_ERR(dev->clk);
> +
> + ret = clk_prepare_enable(dev->clk);
> + if (ret) {
> + clk_put(dev->clk);
> + return ret;
> + }
> +
> + atomic_io_modify(dev->reg + TIMER_CTRL,
> + WDT_A370_RATIO_MASK(WDT_A370_RATIO_SHIFT),
> + WDT_A370_RATIO_MASK(WDT_A370_RATIO_SHIFT));
> + dev->clk_rate = clk_get_rate(dev->clk) / WDT_A370_RATIO;
> +
> + return 0;
> +}
Shouldn't be possible to do the following:
static int armada375_wdt_clock_init(struct platform_device *pdev,
struct orion_watchdog *dev)
{
if (armadaxp_wdt_clock_init(pdev, dev)) {
/* Mandatory fallback for proper devicetree backward compatibility */
return armadaxp_wdt_clock_init(pdev, dev));
}
return 0;
}
Actually reusing the armadaxp_wdt_clock_init() function was also suggested by Thomas
on your first version but I didn't find your answer about it.
Thanks,
Gregory
> +
> static int armadaxp_wdt_clock_init(struct platform_device *pdev,
> struct orion_watchdog *dev)
> {
> @@ -394,7 +434,7 @@ static const struct orion_watchdog_data armada375_data = {
> .rstout_mask_bit = BIT(10),
> .wdt_enable_bit = BIT(8),
> .wdt_counter_offset = 0x34,
> - .clock_init = armada370_wdt_clock_init,
> + .clock_init = armada375_wdt_clock_init,
> .enabled = armada375_enabled,
> .start = armada375_start,
> .stop = armada375_stop,
>
--
Gregory Clement, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
WARNING: multiple messages have this Message-ID (diff)
From: gregory.clement@free-electrons.com (Gregory CLEMENT)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 2/3] watchdog: orion: Use the reference clock on Armada 375 SoC
Date: Mon, 10 Nov 2014 15:41:52 +0100 [thread overview]
Message-ID: <5460CEB0.7080009@free-electrons.com> (raw)
In-Reply-To: <1415107293-19258-3-git-send-email-ezequiel.garcia@free-electrons.com>
Hi Ezequiel,
[...]
> +static int armada375_wdt_clock_init(struct platform_device *pdev,
> + struct orion_watchdog *dev)
> +{
> + int ret;
> +
> + dev->clk = of_clk_get_by_name(pdev->dev.of_node, "fixed");
> + if (!IS_ERR(dev->clk)) {
> + ret = clk_prepare_enable(dev->clk);
> + if (ret) {
> + clk_put(dev->clk);
> + return ret;
> + }
> +
> + atomic_io_modify(dev->reg + TIMER_CTRL,
> + WDT_AXP_FIXED_ENABLE_BIT,
> + WDT_AXP_FIXED_ENABLE_BIT);
> + dev->clk_rate = clk_get_rate(dev->clk);
> +
> + return 0;
> + }
> +
> + /* Mandatory fallback for proper devicetree backward compatibility */
> + dev->clk = clk_get(&pdev->dev, NULL);
> + if (IS_ERR(dev->clk))
> + return PTR_ERR(dev->clk);
> +
> + ret = clk_prepare_enable(dev->clk);
> + if (ret) {
> + clk_put(dev->clk);
> + return ret;
> + }
> +
> + atomic_io_modify(dev->reg + TIMER_CTRL,
> + WDT_A370_RATIO_MASK(WDT_A370_RATIO_SHIFT),
> + WDT_A370_RATIO_MASK(WDT_A370_RATIO_SHIFT));
> + dev->clk_rate = clk_get_rate(dev->clk) / WDT_A370_RATIO;
> +
> + return 0;
> +}
Shouldn't be possible to do the following:
static int armada375_wdt_clock_init(struct platform_device *pdev,
struct orion_watchdog *dev)
{
if (armadaxp_wdt_clock_init(pdev, dev)) {
/* Mandatory fallback for proper devicetree backward compatibility */
return armadaxp_wdt_clock_init(pdev, dev));
}
return 0;
}
Actually reusing the armadaxp_wdt_clock_init() function was also suggested by Thomas
on your first version but I didn't find your answer about it.
Thanks,
Gregory
> +
> static int armadaxp_wdt_clock_init(struct platform_device *pdev,
> struct orion_watchdog *dev)
> {
> @@ -394,7 +434,7 @@ static const struct orion_watchdog_data armada375_data = {
> .rstout_mask_bit = BIT(10),
> .wdt_enable_bit = BIT(8),
> .wdt_counter_offset = 0x34,
> - .clock_init = armada370_wdt_clock_init,
> + .clock_init = armada375_wdt_clock_init,
> .enabled = armada375_enabled,
> .start = armada375_start,
> .stop = armada375_stop,
>
--
Gregory Clement, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
next prev parent reply other threads:[~2014-11-10 14:42 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-11-04 13:21 [PATCH v3 0/3] Make Armada 375 use the reference clock when possible Ezequiel Garcia
2014-11-04 13:21 ` Ezequiel Garcia
2014-11-04 13:21 ` [PATCH v3 1/3] clocksource: armada-370-xp: Add missing clock enable Ezequiel Garcia
2014-11-04 13:21 ` Ezequiel Garcia
2014-11-04 13:21 ` [PATCH v3 2/3] watchdog: orion: Use the reference clock on Armada 375 SoC Ezequiel Garcia
2014-11-04 13:21 ` Ezequiel Garcia
2014-11-10 14:41 ` Gregory CLEMENT [this message]
2014-11-10 14:41 ` Gregory CLEMENT
2014-11-10 14:47 ` Ezequiel Garcia
2014-11-10 14:47 ` Ezequiel Garcia
2014-11-10 15:02 ` Gregory CLEMENT
2014-11-10 15:02 ` Gregory CLEMENT
2014-11-25 13:30 ` Wim Van Sebroeck
2014-11-04 13:21 ` [PATCH v3 3/3] clocksource: armada-370-xp: Use the reference clock on A375 SoC Ezequiel Garcia
2014-11-04 13:21 ` Ezequiel Garcia
2014-11-19 9:25 ` [PATCH v3 0/3] Make Armada 375 use the reference clock when possible Daniel Lezcano
2014-11-19 9:25 ` Daniel Lezcano
2014-11-19 10:45 ` Wim Van Sebroeck
2014-11-24 9:04 ` Daniel Lezcano
2014-11-24 9:04 ` Daniel Lezcano
2014-11-25 13:34 ` Wim Van Sebroeck
2014-11-25 15:47 ` Daniel Lezcano
2014-11-25 15:47 ` Daniel Lezcano
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5460CEB0.7080009@free-electrons.com \
--to=gregory.clement@free-electrons.com \
--cc=alior@marvell.com \
--cc=andrew@lunn.ch \
--cc=daniel.lezcano@linaro.org \
--cc=ezequiel.garcia@free-electrons.com \
--cc=jason@lakedaemon.net \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-watchdog@vger.kernel.org \
--cc=nadavh@marvell.com \
--cc=tawfik@marvell.com \
--cc=thomas.petazzoni@free-electrons.com \
--cc=wim@iguana.be \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.