* [PATCH] Add support for bluetooth BCM20702A1 variant
@ 2014-11-17 13:24 Fabio K
2014-11-18 1:12 ` Marcel Holtmann
0 siblings, 1 reply; 4+ messages in thread
From: Fabio K @ 2014-11-17 13:24 UTC (permalink / raw)
To: linux-bluetooth
Linux 3.18-rc5 (from git commit fc14f9c)
This variant requires the flag BTUSB_BCM_PATCHRAM to work.
Signed-off-by: Fabio K <healthkit@gmail.com>
---
drivers/bluetooth/btusb.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index edfc17b..7c0fdd2 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -106,6 +106,8 @@ static const struct usb_device_id btusb_table[] = {
{ USB_DEVICE(0x0b05, 0x17b5) },
{ USB_DEVICE(0x0b05, 0x17cb) },
{ USB_DEVICE(0x413c, 0x8197) },
+ { USB_DEVICE(0x13d3, 0x3404),
+ .driver_info = BTUSB_BCM_PATCHRAM },
/* Foxconn - Hon Hai */
{ USB_VENDOR_AND_INTERFACE_INFO(0x0489, 0xff, 0x01, 0x01) },
--
2.1.3
^ permalink raw reply related [flat|nested] 4+ messages in thread* Re: [PATCH] Add support for bluetooth BCM20702A1 variant
2014-11-17 13:24 [PATCH] Add support for bluetooth BCM20702A1 variant Fabio K
@ 2014-11-18 1:12 ` Marcel Holtmann
0 siblings, 0 replies; 4+ messages in thread
From: Marcel Holtmann @ 2014-11-18 1:12 UTC (permalink / raw)
To: Fabio K; +Cc: linux-bluetooth
Hi Fabio,
> On Nov 17, 2014, at 22:24, Fabio K <healthkit@gmail.com> wrote:
>
> Linux 3.18-rc5 (from git commit fc14f9c)
>
> This variant requires the flag BTUSB_BCM_PATCHRAM to work.
please include the device details from /sys/kernel/debug/usb/devices in the commit message and preferable some manufacture information including where you can obtain the firmware file from.
>
> Signed-off-by: Fabio K <healthkit@gmail.com>
> ---
> drivers/bluetooth/btusb.c | 2 ++
> 1 file changed, 2 insertions(+)
>
> diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
> index edfc17b..7c0fdd2 100644
> --- a/drivers/bluetooth/btusb.c
> +++ b/drivers/bluetooth/btusb.c
> @@ -106,6 +106,8 @@ static const struct usb_device_id btusb_table[] = {
> { USB_DEVICE(0x0b05, 0x17b5) },
> { USB_DEVICE(0x0b05, 0x17cb) },
> { USB_DEVICE(0x413c, 0x8197) },
> + { USB_DEVICE(0x13d3, 0x3404),
> + .driver_info = BTUSB_BCM_PATCHRAM },
I think your patch has a whitespace damage here.
>
> /* Foxconn - Hon Hai */
> { USB_VENDOR_AND_INTERFACE_INFO(0x0489, 0xff, 0x01, 0x01) },
Regards
Marcel
^ permalink raw reply [flat|nested] 4+ messages in thread
* [PATCH] Add support for bluetooth BCM20702A1 variant
@ 2014-11-18 2:46 Fabio K
2014-11-18 7:35 ` Marcel Holtmann
0 siblings, 1 reply; 4+ messages in thread
From: Fabio K @ 2014-11-18 2:46 UTC (permalink / raw)
To: marcel; +Cc: linux-bluetooth, Fabio K
This variant requires the flag BTUSB_BCM_PATCHRAM to work.
Relevant details from /sys/kernel/debug/usb/devices:
T: Bus=01 Lev=02 Prnt=02 Port=04 Cnt=01 Dev#= 3 Spd=12 MxCh= 0
D: Ver= 2.00 Cls=ff(vend.) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=13d3 ProdID=3404 Rev= 1.12
S: Manufacturer=Broadcom Corp
S: Product=BCM20702A0
S: SerialNumber=240A646F1XXX
C:* #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr= 0mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
I: If#= 1 Alt= 2 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
I: If#= 1 Alt= 3 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
I: If#= 1 Alt= 4 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
I: If#= 1 Alt= 5 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E: Ad=84(I) Atr=02(Bulk) MxPS= 32 Ivl=0ms
E: Ad=04(O) Atr=02(Bulk) MxPS= 32 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=01 Driver=(none)
The firmware was extracted from a Windows 8.1 64-bit installation
and converted from 'hex' to 'hcd' for use in Linux.
Under Windows it also identifies itself as BCM20702A0,
but the firmware is named "BCM20702A1_001.002.014.1315.1356.hex"
and is located in "%SYSTEMROOT%\system32\drivers\"
(md5 67cf6bfdae61c4bb819a66da984f7913)
(sha1 5f74cc6a9a3bf19ee0f8c3d01e4be34c609b188f)
The same firmware file is also available as a download at
http://www.asrock.com/mb/Intel/Z87E-ITX/?cat=Download&os=All
marked as "Bluetooth driver ver:12.0.0.7820"
'hcd' file should be placed at "brcm/BCM20702A0-13d3-3404.hcd"
inside the firmware directory (e.g. "/lib/firmware")
Signed-off-by: Fabio K <healthkit@gmail.com>
---
drivers/bluetooth/btusb.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index edfc17b..7c0fdd2 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -106,6 +106,8 @@ static const struct usb_device_id btusb_table[] = {
{ USB_DEVICE(0x0b05, 0x17b5) },
{ USB_DEVICE(0x0b05, 0x17cb) },
{ USB_DEVICE(0x413c, 0x8197) },
+ { USB_DEVICE(0x13d3, 0x3404),
+ .driver_info = BTUSB_BCM_PATCHRAM },
/* Foxconn - Hon Hai */
{ USB_VENDOR_AND_INTERFACE_INFO(0x0489, 0xff, 0x01, 0x01) },
--
2.1.3
^ permalink raw reply related [flat|nested] 4+ messages in thread* Re: [PATCH] Add support for bluetooth BCM20702A1 variant
2014-11-18 2:46 Fabio K
@ 2014-11-18 7:35 ` Marcel Holtmann
0 siblings, 0 replies; 4+ messages in thread
From: Marcel Holtmann @ 2014-11-18 7:35 UTC (permalink / raw)
To: Fabio K; +Cc: linux-bluetooth
Hi Fabio,
> This variant requires the flag BTUSB_BCM_PATCHRAM to work.
>
> Relevant details from /sys/kernel/debug/usb/devices:
>
> T: Bus=01 Lev=02 Prnt=02 Port=04 Cnt=01 Dev#= 3 Spd=12 MxCh= 0
> D: Ver= 2.00 Cls=ff(vend.) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
> P: Vendor=13d3 ProdID=3404 Rev= 1.12
> S: Manufacturer=Broadcom Corp
> S: Product=BCM20702A0
> S: SerialNumber=240A646F1XXX
> C:* #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr= 0mA
> I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb
> E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms
> E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
> E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
> I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb
> E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
> I: If#= 1 Alt= 1 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb
> E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
> I: If#= 1 Alt= 2 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb
> E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
> I: If#= 1 Alt= 3 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb
> E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
> I: If#= 1 Alt= 4 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb
> E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
> I: If#= 1 Alt= 5 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb
> E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
> I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
> E: Ad=84(I) Atr=02(Bulk) MxPS= 32 Ivl=0ms
> E: Ad=04(O) Atr=02(Bulk) MxPS= 32 Ivl=0ms
> I:* If#= 3 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=01 Driver=(none)
>
> The firmware was extracted from a Windows 8.1 64-bit installation
> and converted from 'hex' to 'hcd' for use in Linux.
>
> Under Windows it also identifies itself as BCM20702A0,
> but the firmware is named "BCM20702A1_001.002.014.1315.1356.hex"
> and is located in "%SYSTEMROOT%\system32\drivers\"
> (md5 67cf6bfdae61c4bb819a66da984f7913)
> (sha1 5f74cc6a9a3bf19ee0f8c3d01e4be34c609b188f)
>
> The same firmware file is also available as a download at
> http://www.asrock.com/mb/Intel/Z87E-ITX/?cat=Download&os=All
> marked as "Bluetooth driver ver:12.0.0.7820"
>
> 'hcd' file should be placed at "brcm/BCM20702A0-13d3-3404.hcd"
> inside the firmware directory (e.g. "/lib/firmware")
>
> Signed-off-by: Fabio K <healthkit@gmail.com>
> ---
> drivers/bluetooth/btusb.c | 2 ++
> 1 file changed, 2 insertions(+)
patch has been applied to bluetooth-next tree.
Regards
Marcel
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2014-11-18 7:35 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2014-11-17 13:24 [PATCH] Add support for bluetooth BCM20702A1 variant Fabio K
2014-11-18 1:12 ` Marcel Holtmann
-- strict thread matches above, loose matches on Subject: below --
2014-11-18 2:46 Fabio K
2014-11-18 7:35 ` Marcel Holtmann
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.