how to update a package on yocto project

how to update a package on yocto project

[Nishanth S]

Hi

board : Intel Galileo Gen 1

I use yocto project for build image/tarball for the board.

How to update a existing package???

I mean, I use openjdk-6 on my board.

But I need to change it to openjdk-7.

I edited local.conf by adding following line.

preferred_version_openjdkXXXX = XXXX


-- 
Regards,
Nishanth.S

Re: how to update a package on yocto project

[Iorga, Cristian]

Hi,

Try with something like this added to the build's conf/local.conf:

PREFERRED_VERSION_openjdk-7-jre = "25b30-2.3.12"
PREFERRED_PROVIDER_openjdk-7-jre = "openjdk-7-jre"

Of course, substitute PREFERRED_VERSION_openjdk-7-jre with your exact version of openjdk-7-jre that you have and want to use.

Regards,
Cristian Iorga
Yocto Project
Intel Corporation

-----Original Message-----
From: bitbake-devel-bounces@lists.openembedded.org [mailto:bitbake-devel-bounces@lists.openembedded.org] On Behalf Of Nishanth S
Sent: Tuesday, November 18, 2014 8:30 AM
To: bitbake-devel@lists.openembedded.org
Subject: [bitbake-devel] how to update a package on yocto project

Hi

board : Intel Galileo Gen 1

I use yocto project for build image/tarball for the board.

How to update a existing package???

I mean, I use openjdk-6 on my board.

But I need to change it to openjdk-7.

I edited local.conf by adding following line.

preferred_version_openjdkXXXX = XXXX


-- 
Regards,
Nishanth.S

-- 
_______________________________________________
bitbake-devel mailing list
bitbake-devel@lists.openembedded.org
http://lists.openembedded.org/mailman/listinfo/bitbake-devel

Re: [bitbake-devel] how to update a package on yocto project

[Nishanth S]

Hi

board : Intel Galileo Gen 1

I use yocto project for build image/tarball for the board.

How to update a existing package???

I mean, I use openjdk-6 on my board.

But I need to change it to openjdk-7.

I edited local.conf by adding following line.

preferred_version_openjdkXXXX = XXXX




I tried this but the resulting image.tar had only openjdk-6.

How do I include openjdk-7 with core-image???

-- 
Regards,
Nishanth.S

Re: [bitbake-devel] how to update a package on yocto project

[Paul Eggleton]

Hi Nishanth,

On Monday 24 November 2014 11:34:17 Nishanth S wrote:
> board : Intel Galileo Gen 1
> 
> I use yocto project for build image/tarball for the board.
> 
> How to update a existing package???
> 
> I mean, I use openjdk-6 on my board.
> 
> But I need to change it to openjdk-7.
> 
> I edited local.conf by adding following line.
> 
> preferred_version_openjdkXXXX = XXXX
> 
> 
> 
> 
> I tried this but the resulting image.tar had only openjdk-6.
> 
> How do I include openjdk-7 with core-image???

There needs to be a recipe to actually provide that - PREFERRED_VERSION only 
selects between available versioned recipes. Is there an openjdk-7 recipe in 
your configuration? If not, you will need to add one.

Cheers,
Paul

-- 

Paul Eggleton
Intel Open Source Technology Centre

Re: [bitbake-devel] how to update a package on yocto project

[Iorga, Cristian]

Hi,
Nishanth, I am assuming you are using the meta-java layer, right?
If so, have you tried my suggestions?
/Cristian


-----Original Message-----
From: yocto-bounces@yoctoproject.org [mailto:yocto-bounces@yoctoproject.org] On Behalf Of Paul Eggleton
Sent: Tuesday, November 25, 2014 1:20 PM
To: Nishanth S
Cc: yocto@yoctoproject.org
Subject: Re: [yocto] [bitbake-devel] how to update a package on yocto project

Hi Nishanth,

On Monday 24 November 2014 11:34:17 Nishanth S wrote:
> board : Intel Galileo Gen 1
> 
> I use yocto project for build image/tarball for the board.
> 
> How to update a existing package???
> 
> I mean, I use openjdk-6 on my board.
> 
> But I need to change it to openjdk-7.
> 
> I edited local.conf by adding following line.
> 
> preferred_version_openjdkXXXX = XXXX
> 
> 
> 
> 
> I tried this but the resulting image.tar had only openjdk-6.
> 
> How do I include openjdk-7 with core-image???

There needs to be a recipe to actually provide that - PREFERRED_VERSION only selects between available versioned recipes. Is there an openjdk-7 recipe in your configuration? If not, you will need to add one.

Cheers,
Paul

-- 

Paul Eggleton
Intel Open Source Technology Centre
--
_______________________________________________
yocto mailing list
yocto@yoctoproject.org
https://lists.yoctoproject.org/listinfo/yocto

Re: how to update a package on yocto project

[Iorga, Cristian]

Please note that the right list to ask this question would be:
yocto@yoctoproject.org and/or openembedded-issues@lists.openembedded.org

Regards,
Cristian Iorga
Yocto Project
Intel Corporation

-----Original Message-----
From: bitbake-devel-bounces@lists.openembedded.org [mailto:bitbake-devel-bounces@lists.openembedded.org] On Behalf Of Nishanth S
Sent: Tuesday, November 18, 2014 8:30 AM
To: bitbake-devel@lists.openembedded.org
Subject: [bitbake-devel] how to update a package on yocto project

Hi

board : Intel Galileo Gen 1

I use yocto project for build image/tarball for the board.

How to update a existing package???

I mean, I use openjdk-6 on my board.

But I need to change it to openjdk-7.

I edited local.conf by adding following line.

preferred_version_openjdkXXXX = XXXX


-- 
Regards,
Nishanth.S

-- 
_______________________________________________
bitbake-devel mailing list
bitbake-devel@lists.openembedded.org
http://lists.openembedded.org/mailman/listinfo/bitbake-devel