diff for duplicates of <546B9FD1.6040801@gmail.com> diff --git a/a/1.txt b/N1/1.txt index 3c8c134..f4d51f8 100644 --- a/a/1.txt +++ b/N1/1.txt @@ -2,7 +2,7 @@ On 17.11.2014 14:35, Antoine Tenart wrote: > Adds nodes describing the Marvell Berlin BG2Q USB PHY and USB. The BG2Q > SoC has 3 USB host controller, compatible with ChipIdea. > -> Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> +> Signed-off-by: Antoine Tenart <antoine.tenart-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org> Applied to berlin/dt with the whitespace removed that Sergei pointed out. @@ -21,7 +21,7 @@ Thanks! > #interrupt-cells = <3>; > }; > -> + usb_phy2: phy at a2f400 { +> + usb_phy2: phy@a2f400 { > + compatible = "marvell,berlin2-usb-phy"; > + reg = <0xa2f400 0x128>; > + #phy-cells = <0>; @@ -29,7 +29,7 @@ Thanks! > + status = "disabled"; > + }; > + -> + usb2: usb at a30000 { +> + usb2: usb@a30000 { > + compatible = "chipidea,usb2"; > + reg = <0xa30000 0x10000>; > + interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; @@ -39,7 +39,7 @@ Thanks! > + status = "disabled"; > + }; > + -> + usb_phy0: phy at b74000 { +> + usb_phy0: phy@b74000 { > + compatible = "marvell,berlin2-usb-phy"; > + reg = <0xb74000 0x128>; > + #phy-cells = <0>; @@ -47,7 +47,7 @@ Thanks! > + status = "disabled"; > + }; > + -> + usb_phy1: phy at b78000 { +> + usb_phy1: phy@b78000 { > + compatible = "marvell,berlin2-usb-phy"; > + reg = <0xb78000 0x128>; > + #phy-cells = <0>; @@ -55,14 +55,14 @@ Thanks! > + status = "disabled"; > + }; > + -> eth0: ethernet at b90000 { +> eth0: ethernet@b90000 { > compatible = "marvell,pxa168-eth"; > reg = <0xb90000 0x10000>; > @@ -365,6 +399,26 @@ > }; > }; > -> + usb0: usb at ed0000 { +> + usb0: usb@ed0000 { > + compatible = "chipidea,usb2"; > + reg = <0xed0000 0x10000>; > + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; @@ -72,7 +72,7 @@ Thanks! > + status = "disabled"; > + }; > + -> + usb1: usb at ee0000 { +> + usb1: usb@ee0000 { > + compatible = "chipidea,usb2"; > + reg = <0xee0000 0x10000>; > + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; @@ -82,7 +82,7 @@ Thanks! > + status = "disabled"; > + }; > + -> apb at fc0000 { +> apb@fc0000 { > compatible = "simple-bus"; > #address-cells = <1>; > @@ -457,5 +511,6 @@ @@ -93,3 +93,8 @@ Thanks! > }; > }; > + +-- +To unsubscribe from this list: send the line "unsubscribe devicetree" in +the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org +More majordomo info at http://vger.kernel.org/majordomo-info.html diff --git a/a/content_digest b/N1/content_digest index 3220159..bc267d7 100644 --- a/a/content_digest +++ b/N1/content_digest @@ -1,16 +1,29 @@ "ref\01416231347-27193-1-git-send-email-antoine.tenart@free-electrons.com\0" "ref\01416231347-27193-11-git-send-email-antoine.tenart@free-electrons.com\0" - "From\0sebastian.hesselbarth@gmail.com (Sebastian Hesselbarth)\0" - "Subject\0[PATCH v8 10/13] ARM: dts: berlin: add BG2Q nodes for USB support\0" + "ref\01416231347-27193-11-git-send-email-antoine.tenart-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org\0" + "From\0Sebastian Hesselbarth <sebastian.hesselbarth-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>\0" + "Subject\0Re: [PATCH v8 10/13] ARM: dts: berlin: add BG2Q nodes for USB support\0" "Date\0Tue, 18 Nov 2014 20:36:49 +0100\0" - "To\0linux-arm-kernel@lists.infradead.org\0" + "To\0Antoine Tenart <antoine.tenart-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>" + Peter.Chen-KZfg59tc24xl57MIdRCFDg@public.gmane.org + balbi-l0cyMroinI0@public.gmane.org + " p.zabel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org\0" + "Cc\0alexandre.belloni-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org" + thomas.petazzoni-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org + zmxu-eYqpPyKDWXRBDgjK7y7TUQ@public.gmane.org + jszhang-eYqpPyKDWXRBDgjK7y7TUQ@public.gmane.org + michal.simek-gjFFaj9aHVfQT0dZR+AlfA@public.gmane.org + linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org + linux-usb-u79uwXL29TY76Z2rM5mHXA@public.gmane.org + devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org + " linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org\0" "\00:1\0" "b\0" "On 17.11.2014 14:35, Antoine Tenart wrote:\n" "> Adds nodes describing the Marvell Berlin BG2Q USB PHY and USB. The BG2Q\n" "> SoC has 3 USB host controller, compatible with ChipIdea.\n" ">\n" - "> Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>\n" + "> Signed-off-by: Antoine Tenart <antoine.tenart-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>\n" "\n" "Applied to berlin/dt with the whitespace removed that Sergei pointed\n" "out.\n" @@ -29,7 +42,7 @@ "> \t\t\t#interrupt-cells = <3>;\n" "> \t\t};\n" ">\n" - "> +\t\tusb_phy2: phy at a2f400 {\n" + "> +\t\tusb_phy2: phy@a2f400 {\n" "> +\t\t\tcompatible = \"marvell,berlin2-usb-phy\";\n" "> +\t\t\treg = <0xa2f400 0x128>;\n" "> +\t\t\t#phy-cells = <0>;\n" @@ -37,7 +50,7 @@ "> +\t\t\tstatus = \"disabled\";\n" "> +\t\t};\n" "> +\n" - "> +\t\tusb2: usb at a30000 {\n" + "> +\t\tusb2: usb@a30000 {\n" "> +\t\t\tcompatible = \"chipidea,usb2\";\n" "> +\t\t\treg = <0xa30000 0x10000>;\n" "> +\t\t\tinterrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;\n" @@ -47,7 +60,7 @@ "> +\t\t\tstatus = \"disabled\";\n" "> +\t\t};\n" "> +\n" - "> +\t\tusb_phy0: phy at b74000 {\n" + "> +\t\tusb_phy0: phy@b74000 {\n" "> +\t\t\tcompatible = \"marvell,berlin2-usb-phy\";\n" "> +\t\t\treg = <0xb74000 0x128>;\n" "> +\t\t\t#phy-cells = <0>;\n" @@ -55,7 +68,7 @@ "> +\t\t\tstatus = \"disabled\";\n" "> +\t\t};\n" "> +\n" - "> +\t\tusb_phy1: phy at b78000 {\n" + "> +\t\tusb_phy1: phy@b78000 {\n" "> +\t\t\tcompatible = \"marvell,berlin2-usb-phy\";\n" "> +\t\t\treg = <0xb78000 0x128>;\n" "> +\t\t\t#phy-cells = <0>;\n" @@ -63,14 +76,14 @@ "> +\t\t\tstatus = \"disabled\";\n" "> +\t\t};\n" "> +\n" - "> \t\teth0: ethernet at b90000 {\n" + "> \t\teth0: ethernet@b90000 {\n" "> \t\t\tcompatible = \"marvell,pxa168-eth\";\n" "> \t\t\treg = <0xb90000 0x10000>;\n" "> @@ -365,6 +399,26 @@\n" "> \t\t\t};\n" "> \t\t};\n" ">\n" - "> +\t\tusb0: usb at ed0000 {\n" + "> +\t\tusb0: usb@ed0000 {\n" "> +\t\t\tcompatible = \"chipidea,usb2\";\n" "> +\t\t\treg = <0xed0000 0x10000>;\n" "> +\t\t\tinterrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;\n" @@ -80,7 +93,7 @@ "> +\t\t\tstatus = \"disabled\";\n" "> +\t\t};\n" "> +\n" - "> +\t\tusb1: usb at ee0000 {\n" + "> +\t\tusb1: usb@ee0000 {\n" "> +\t\t\tcompatible = \"chipidea,usb2\";\n" "> +\t\t\treg = <0xee0000 0x10000>;\n" "> +\t\t\tinterrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;\n" @@ -90,7 +103,7 @@ "> +\t\t\tstatus = \"disabled\";\n" "> +\t\t};\n" "> +\n" - "> \t\tapb at fc0000 {\n" + "> \t\tapb@fc0000 {\n" "> \t\t\tcompatible = \"simple-bus\";\n" "> \t\t\t#address-cells = <1>;\n" "> @@ -457,5 +511,6 @@\n" @@ -100,6 +113,11 @@ "> +\n" "> \t};\n" "> };\n" - > + ">\n" + "\n" + "--\n" + "To unsubscribe from this list: send the line \"unsubscribe devicetree\" in\n" + "the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org\n" + More majordomo info at http://vger.kernel.org/majordomo-info.html -77585383f7f7ccb0adf7217da537e691aecb51823ecaf9df0cb6199492387163 +5b0fcf855ea3172abcf689128ece1e2df47d9f79297c1a42c71a2f1419507584
diff --git a/a/1.txt b/N2/1.txt index 3c8c134..04d7578 100644 --- a/a/1.txt +++ b/N2/1.txt @@ -21,7 +21,7 @@ Thanks! > #interrupt-cells = <3>; > }; > -> + usb_phy2: phy at a2f400 { +> + usb_phy2: phy@a2f400 { > + compatible = "marvell,berlin2-usb-phy"; > + reg = <0xa2f400 0x128>; > + #phy-cells = <0>; @@ -29,7 +29,7 @@ Thanks! > + status = "disabled"; > + }; > + -> + usb2: usb at a30000 { +> + usb2: usb@a30000 { > + compatible = "chipidea,usb2"; > + reg = <0xa30000 0x10000>; > + interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; @@ -39,7 +39,7 @@ Thanks! > + status = "disabled"; > + }; > + -> + usb_phy0: phy at b74000 { +> + usb_phy0: phy@b74000 { > + compatible = "marvell,berlin2-usb-phy"; > + reg = <0xb74000 0x128>; > + #phy-cells = <0>; @@ -47,7 +47,7 @@ Thanks! > + status = "disabled"; > + }; > + -> + usb_phy1: phy at b78000 { +> + usb_phy1: phy@b78000 { > + compatible = "marvell,berlin2-usb-phy"; > + reg = <0xb78000 0x128>; > + #phy-cells = <0>; @@ -55,14 +55,14 @@ Thanks! > + status = "disabled"; > + }; > + -> eth0: ethernet at b90000 { +> eth0: ethernet@b90000 { > compatible = "marvell,pxa168-eth"; > reg = <0xb90000 0x10000>; > @@ -365,6 +399,26 @@ > }; > }; > -> + usb0: usb at ed0000 { +> + usb0: usb@ed0000 { > + compatible = "chipidea,usb2"; > + reg = <0xed0000 0x10000>; > + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; @@ -72,7 +72,7 @@ Thanks! > + status = "disabled"; > + }; > + -> + usb1: usb at ee0000 { +> + usb1: usb@ee0000 { > + compatible = "chipidea,usb2"; > + reg = <0xee0000 0x10000>; > + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; @@ -82,7 +82,7 @@ Thanks! > + status = "disabled"; > + }; > + -> apb at fc0000 { +> apb@fc0000 { > compatible = "simple-bus"; > #address-cells = <1>; > @@ -457,5 +511,6 @@ diff --git a/a/content_digest b/N2/content_digest index 3220159..250427e 100644 --- a/a/content_digest +++ b/N2/content_digest @@ -1,9 +1,21 @@ "ref\01416231347-27193-1-git-send-email-antoine.tenart@free-electrons.com\0" "ref\01416231347-27193-11-git-send-email-antoine.tenart@free-electrons.com\0" - "From\0sebastian.hesselbarth@gmail.com (Sebastian Hesselbarth)\0" - "Subject\0[PATCH v8 10/13] ARM: dts: berlin: add BG2Q nodes for USB support\0" + "From\0Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>\0" + "Subject\0Re: [PATCH v8 10/13] ARM: dts: berlin: add BG2Q nodes for USB support\0" "Date\0Tue, 18 Nov 2014 20:36:49 +0100\0" - "To\0linux-arm-kernel@lists.infradead.org\0" + "To\0Antoine Tenart <antoine.tenart@free-electrons.com>" + Peter.Chen@freescale.com + balbi@ti.com + " p.zabel@pengutronix.de\0" + "Cc\0alexandre.belloni@free-electrons.com" + thomas.petazzoni@free-electrons.com + zmxu@marvell.com + jszhang@marvell.com + michal.simek@xilinx.com + linux-arm-kernel@lists.infradead.org + linux-usb@vger.kernel.org + devicetree@vger.kernel.org + " linux-kernel@vger.kernel.org\0" "\00:1\0" "b\0" "On 17.11.2014 14:35, Antoine Tenart wrote:\n" @@ -29,7 +41,7 @@ "> \t\t\t#interrupt-cells = <3>;\n" "> \t\t};\n" ">\n" - "> +\t\tusb_phy2: phy at a2f400 {\n" + "> +\t\tusb_phy2: phy@a2f400 {\n" "> +\t\t\tcompatible = \"marvell,berlin2-usb-phy\";\n" "> +\t\t\treg = <0xa2f400 0x128>;\n" "> +\t\t\t#phy-cells = <0>;\n" @@ -37,7 +49,7 @@ "> +\t\t\tstatus = \"disabled\";\n" "> +\t\t};\n" "> +\n" - "> +\t\tusb2: usb at a30000 {\n" + "> +\t\tusb2: usb@a30000 {\n" "> +\t\t\tcompatible = \"chipidea,usb2\";\n" "> +\t\t\treg = <0xa30000 0x10000>;\n" "> +\t\t\tinterrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;\n" @@ -47,7 +59,7 @@ "> +\t\t\tstatus = \"disabled\";\n" "> +\t\t};\n" "> +\n" - "> +\t\tusb_phy0: phy at b74000 {\n" + "> +\t\tusb_phy0: phy@b74000 {\n" "> +\t\t\tcompatible = \"marvell,berlin2-usb-phy\";\n" "> +\t\t\treg = <0xb74000 0x128>;\n" "> +\t\t\t#phy-cells = <0>;\n" @@ -55,7 +67,7 @@ "> +\t\t\tstatus = \"disabled\";\n" "> +\t\t};\n" "> +\n" - "> +\t\tusb_phy1: phy at b78000 {\n" + "> +\t\tusb_phy1: phy@b78000 {\n" "> +\t\t\tcompatible = \"marvell,berlin2-usb-phy\";\n" "> +\t\t\treg = <0xb78000 0x128>;\n" "> +\t\t\t#phy-cells = <0>;\n" @@ -63,14 +75,14 @@ "> +\t\t\tstatus = \"disabled\";\n" "> +\t\t};\n" "> +\n" - "> \t\teth0: ethernet at b90000 {\n" + "> \t\teth0: ethernet@b90000 {\n" "> \t\t\tcompatible = \"marvell,pxa168-eth\";\n" "> \t\t\treg = <0xb90000 0x10000>;\n" "> @@ -365,6 +399,26 @@\n" "> \t\t\t};\n" "> \t\t};\n" ">\n" - "> +\t\tusb0: usb at ed0000 {\n" + "> +\t\tusb0: usb@ed0000 {\n" "> +\t\t\tcompatible = \"chipidea,usb2\";\n" "> +\t\t\treg = <0xed0000 0x10000>;\n" "> +\t\t\tinterrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;\n" @@ -80,7 +92,7 @@ "> +\t\t\tstatus = \"disabled\";\n" "> +\t\t};\n" "> +\n" - "> +\t\tusb1: usb at ee0000 {\n" + "> +\t\tusb1: usb@ee0000 {\n" "> +\t\t\tcompatible = \"chipidea,usb2\";\n" "> +\t\t\treg = <0xee0000 0x10000>;\n" "> +\t\t\tinterrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;\n" @@ -90,7 +102,7 @@ "> +\t\t\tstatus = \"disabled\";\n" "> +\t\t};\n" "> +\n" - "> \t\tapb at fc0000 {\n" + "> \t\tapb@fc0000 {\n" "> \t\t\tcompatible = \"simple-bus\";\n" "> \t\t\t#address-cells = <1>;\n" "> @@ -457,5 +511,6 @@\n" @@ -102,4 +114,4 @@ "> };\n" > -77585383f7f7ccb0adf7217da537e691aecb51823ecaf9df0cb6199492387163 +f2d4eba2b76ae0b340c381a05621e2c81a812cad91e68048e6ad47c907d30147
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.