Re: [PATCH v3 1/5] mfd: rt5033: Add Richtek RT5033 driver core.

[Beomho Seo <beomho.seo-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>]

Thank you for review.

On 11/19/2014 01:25 AM, Lee Jones wrote:
> On Wed, 12 Nov 2014, Beomho Seo wrote:
> 
>> This patch adds a new driver for Richtek RT5033 driver.
>> RT5033 is a Multifunction device which includes battery charger, fuel gauge,
>> flash LED current source, LDO and synchronous Buck converter. It is interfaced
>> to host controller using I2C interface.
>>
>> Cc: Samuel Ortiz <sameo-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
>> Cc: Lee Jones <lee.jone-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
>> Signed-off-by: Beomho Seo <beomho.seo-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
>> Acked-by: Chanwoo Choi <cw00.choi-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
>> ---
>> Changes in v3
>> - Correct sentence errors.
>> - Add author information the top of each drivers.
>> - Remove unnecessary pre-initialise, struct member(rt5033->i2c) and blink.
>> - Change some return check.
>> - Use bool and of_match_ptr().
>>
>> Changes in v2
>> - Remove volatile_reg callback. Because this driver not in use regmap cache.
>> - Revmoe unnecessary subnode of_compatible.
>> - Add define for set_high impedance mode of charger.
>> ---
>>
>>  drivers/mfd/Kconfig                |   12 ++
>>  drivers/mfd/Makefile               |    1 +
>>  drivers/mfd/rt5033.c               |  141 +++++++++++++++++++
>>  include/linux/mfd/rt5033-private.h |  260 ++++++++++++++++++++++++++++++++++++
>>  include/linux/mfd/rt5033.h         |   62 +++++++++
>>  5 files changed, 476 insertions(+)
>>  create mode 100644 drivers/mfd/rt5033.c
>>  create mode 100644 include/linux/mfd/rt5033-private.h
>>  create mode 100644 include/linux/mfd/rt5033.h
>>
>> diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
>> index 72d3808..55b6551 100644
>> --- a/drivers/mfd/Kconfig
>> +++ b/drivers/mfd/Kconfig
>> @@ -618,6 +618,18 @@ config MFD_RTSX_PCI
>>  	  types of memory cards, such as Memory Stick, Memory Stick Pro,
>>  	  Secure Digital and MultiMediaCard.
>>  
>> +config MFD_RT5033
>> +	bool "Richtek RT5033 Power Management IC"
>> +	depends on I2C=y
>> +	select MFD_CORE
>> +	select REGMAP_I2C
>> +	help
>> +	  This driver provides for the Richtek RT5033 Power Management IC,
>> +	  which includes the I2C driver and the Core APIs. This driver provides
>> +	  common support for accessing the device. The device supports multiple
>> +	  sub-devices like charger, fuel gauge, flash LED, current source,
>> +	  LDO and Buck.
> 
> What's stopping this from being built as a module?
> 

I will change to possible building as a module.

>>  config MFD_RTSX_USB
>>  	tristate "Realtek USB card reader"
>>  	depends on USB
>> diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
>> index 53467e2..4059c24 100644
>> --- a/drivers/mfd/Makefile
>> +++ b/drivers/mfd/Makefile
>> @@ -176,6 +176,7 @@ obj-$(CONFIG_MFD_IPAQ_MICRO)	+= ipaq-micro.o
>>  obj-$(CONFIG_MFD_MENF21BMC)	+= menf21bmc.o
>>  obj-$(CONFIG_MFD_HI6421_PMIC)	+= hi6421-pmic-core.o
>>  obj-$(CONFIG_MFD_DLN2)		+= dln2.o
>> +obj-$(CONFIG_MFD_RT5033)	+= rt5033.o
>>  
>>  intel-soc-pmic-objs		:= intel_soc_pmic_core.o intel_soc_pmic_crc.o
>>  obj-$(CONFIG_INTEL_SOC_PMIC)	+= intel-soc-pmic.o
>> diff --git a/drivers/mfd/rt5033.c b/drivers/mfd/rt5033.c
>> new file mode 100644
>> index 0000000..e29c6d9
>> --- /dev/null
>> +++ b/drivers/mfd/rt5033.c
>> @@ -0,0 +1,141 @@
>> +/*
>> + * MFD core driver for the Richtek RT5033.
>> + *
>> + * Copyright (C) 2014 Samsung Electronics, Co., Ltd.
>> + * Author: Beomho Seo <beomho.seo-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License version 2 as
>> + * published bythe Free Software Foundation.
>> + */
>> +
>> +#include <linux/err.h>
>> +#include <linux/module.h>
> 
> Why have you included this if you can't build as a module?
> 

I will change that driver can build as a module.

>> +#include <linux/interrupt.h>
>> +#include <linux/of_device.h>
>> +#include <linux/mfd/core.h>
>> +#include <linux/mfd/rt5033.h>
>> +#include <linux/mfd/rt5033-private.h>
>> +
>> +static const struct regmap_irq rt5033_irqs[] = {
>> +	{ .mask = RT5033_PMIC_IRQ_BUCKOCP, },
>> +	{ .mask = RT5033_PMIC_IRQ_BUCKLV, },
>> +	{ .mask = RT5033_PMIC_IRQ_SAFELDOLV, },
>> +	{ .mask = RT5033_PMIC_IRQ_LDOLV, },
>> +	{ .mask = RT5033_PMIC_IRQ_OT, },
>> +	{ .mask = RT5033_PMIC_IRQ_VDDA_UV, },
>> +};
>> +
>> +static const struct regmap_irq_chip rt5033_irq_chip = {
>> +	.name		= "rt5033",
>> +	.status_base	= RT5033_REG_PMIC_IRQ_STAT,
>> +	.mask_base	= RT5033_REG_PMIC_IRQ_CTRL,
>> +	.mask_invert	= true,
>> +	.num_regs	= 1,
>> +	.irqs		= rt5033_irqs,
>> +	.num_irqs	= ARRAY_SIZE(rt5033_irqs),
>> +};
>> +
>> +static const struct mfd_cell rt5033_devs[] = {
>> +	{
>> +		.name = "rt5033-regulator",
>> +	}, {
> 
> Place this entry on one line.  Like you did in rt5033_irqs.
>

OK, I will fix it like rt5033_irqs style.

>> +		.name = "rt5033-charger",
>> +		.of_compatible = "richtek,rt5033-charger",
>> +	}, {
>> +		.name = "rt5033-battery",
>> +		.of_compatible = "richtek,rt5033-battery",
>> +	},
>> +};
>> +
>> +static const struct of_device_id rt5033_dt_match[] = {
>> +	{ .compatible = "richtek,rt5033", },
>> +	{ }
>> +};
>> +
>> +static const struct regmap_config rt5033_regmap_config = {
>> +	.reg_bits	= 8,
>> +	.val_bits	= 8,
>> +	.max_register	= RT5033_REG_END,
>> +};
>> +
>> +static int rt5033_i2c_probe(struct i2c_client *i2c,
>> +				const struct i2c_device_id *id)
>> +{
>> +	struct rt5033_dev *rt5033;
>> +	unsigned int data;
>> +	int ret;
>> +
>> +	rt5033 = devm_kzalloc(&i2c->dev, sizeof(*rt5033), GFP_KERNEL);
>> +	if (!rt5033)
>> +		return -ENOMEM;
>> +
>> +	i2c_set_clientdata(i2c, rt5033);
>> +	rt5033->dev = &i2c->dev;
>> +	rt5033->irq = i2c->irq;
>> +	rt5033->wakeup = true;
>> +
>> +	rt5033->regmap = devm_regmap_init_i2c(i2c, &rt5033_regmap_config);
>> +	if (IS_ERR(rt5033->regmap)) {
>> +		dev_err(&i2c->dev, "Failed to allocate register map.\n");
>> +		return PTR_ERR(rt5033->regmap);
>> +	}
>> +
>> +	ret = regmap_read(rt5033->regmap, RT5033_REG_DEVICE_ID, &data);
>> +	if (ret) {
>> +		dev_err(&i2c->dev, "Device not found\n");
>> +		return -ENODEV;
>> +	}
>> +	dev_info(&i2c->dev, "Device found Device ID: %04x\n", data);
>> +
>> +	ret = regmap_add_irq_chip(rt5033->regmap, rt5033->irq,
>> +			IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
>> +			0, &rt5033_irq_chip, &rt5033->irq_data);
>> +	if (ret) {
>> +		dev_err(&i2c->dev, "Failed to request IRQ %d: %d\n",
>> +							rt5033->irq, ret);
>> +		return ret;
>> +	}
>> +
>> +	ret = mfd_add_devices(rt5033->dev, -1, rt5033_devs,
>> +			ARRAY_SIZE(rt5033_devs), NULL, 0,
>> +			regmap_irq_get_domain(rt5033->irq_data));
>> +	if (ret < 0) {
>> +		dev_err(&i2c->dev, "Failed to add RT5033 child device.\n");
> 
> s/device/devices/
> 

OK. I will fix it.

>> +		return ret;
>> +	}
>> +
>> +	device_init_wakeup(rt5033->dev, rt5033->wakeup);
>> +
>> +	return 0;
>> +}
>> +
>> +static int rt5033_i2c_remove(struct i2c_client *i2c)
>> +{
>> +	struct rt5033_dev *rt5033 = i2c_get_clientdata(i2c);
>> +
>> +	mfd_remove_devices(rt5033->dev);
>> +
>> +	return 0;
>> +}
>> +
>> +static const struct i2c_device_id rt5033_i2c_id[] = {
>> +	{ "rt5033", },
>> +	{ }
>> +};
>> +MODULE_DEVICE_TABLE(i2c, rt5033_i2c_id);
> 
> Why do you need to export this if you're not building as a module?
> 

I will change possible building as a module.

>> +static struct i2c_driver rt5033_driver = {
>> +	.driver = {
>> +		.name = "rt5033",
>> +		.of_match_table = of_match_ptr(rt5033_dt_match),
>> +	},
>> +	.probe = rt5033_i2c_probe,
>> +	.remove = rt5033_i2c_remove,
>> +	.id_table = rt5033_i2c_id,
>> +};
>> +module_i2c_driver(rt5033_driver);
>>
>> +MODULE_DESCRIPTION("Richtek RT5033 multi-function core driver");
>> +MODULE_AUTHOR("Beomho Seo <beomho.seo-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>");
>> +MODULE_LICENSE("GPL");
> 
> More module stuff?
> 
> [...]
> 
OK. I will revise this patch on your advice.

Again Thank you for your advice.
I will submit next revision patch set.

Regards,
Beomho Seo
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html