All of lore.kernel.org
 help / color / mirror / Atom feed
From: Lokesh Vutla <lokeshvutla@ti.com>
To: Tony Lindgren <tony@atomide.com>, linux-omap@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org,
	Arnd Bergmann <arnd@arndb.de>, Roger Quadros <rogerq@ti.com>
Subject: Re: [PATCH 3/3] drivers: bus: Move omap gpmc code to live under drivers
Date: Fri, 21 Nov 2014 13:35:58 +0530	[thread overview]
Message-ID: <546EF266.1010901@ti.com> (raw)
In-Reply-To: <1416522501-14999-4-git-send-email-tony@atomide.com>

Hi Tony,

On Friday 21 November 2014 03:58 AM, Tony Lindgren wrote:
> Just move to drivers as further clean-up can now happen there
> finally.
> 
> Cc: Arnd Bergmann <arnd@arndb.de>
> Cc: Roger Quadros <rogerq@ti.com>
> Signed-off-by: Tony Lindgren <tony@atomide.com>
> ---
>  arch/arm/mach-omap2/Kconfig                           | 1 +
>  arch/arm/mach-omap2/Makefile                          | 2 +-
>  drivers/bus/Kconfig                                   | 3 +++
>  drivers/bus/Makefile                                  | 3 ++-
>  arch/arm/mach-omap2/gpmc.c => drivers/bus/omap-gpmc.c | 0
>  5 files changed, 7 insertions(+), 2 deletions(-)
>  rename arch/arm/mach-omap2/gpmc.c => drivers/bus/omap-gpmc.c (100%)
> 
> diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
> index f4d06ae..3021901 100644
> --- a/arch/arm/mach-omap2/Kconfig
> +++ b/arch/arm/mach-omap2/Kconfig
> @@ -80,6 +80,7 @@ config ARCH_OMAP2PLUS
>  	select GENERIC_IRQ_CHIP
>  	select MACH_OMAP_GENERIC
>  	select OMAP_DM_TIMER
> +	select OMAP_GPMC
>  	select PINCTRL
>  	select SOC_BUS
>  	select TI_PRIV_EDMA
> diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
> index 3e824f8..bd85741 100644
> --- a/arch/arm/mach-omap2/Makefile
> +++ b/arch/arm/mach-omap2/Makefile
> @@ -6,7 +6,7 @@ ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include \
>  	-I$(srctree)/arch/arm/plat-omap/include
>  
>  # Common support
> -obj-y := id.o io.o control.o mux.o devices.o fb.o serial.o gpmc.o timer.o pm.o \
> +obj-y := id.o io.o control.o mux.o devices.o fb.o serial.o timer.o pm.o \
>  	 common.o gpio.o dma.o wd_timer.o display.o i2c.o hdq1w.o omap_hwmod.o \
>  	 omap_device.o sram.o drm.o
>  
> diff --git a/drivers/bus/Kconfig b/drivers/bus/Kconfig
> index 603eb1b..09aacc8 100644
> --- a/drivers/bus/Kconfig
> +++ b/drivers/bus/Kconfig
> @@ -27,6 +27,9 @@ config MVEBU_MBUS
>  	  Driver needed for the MBus configuration on Marvell EBU SoCs
>  	  (Kirkwood, Dove, Orion5x, MV78XX0 and Armada 370/XP).
>  
> +config OMAP_GPMC
> +	bool
> +
>  config OMAP_OCP2SCP
>  	tristate "OMAP OCP2SCP DRIVER"
>  	depends on ARCH_OMAP2PLUS
> diff --git a/drivers/bus/Makefile b/drivers/bus/Makefile
> index 2973c18..96e77dd 100644
> --- a/drivers/bus/Makefile
> +++ b/drivers/bus/Makefile
> @@ -5,7 +5,8 @@
>  obj-$(CONFIG_BRCMSTB_GISB_ARB)	+= brcmstb_gisb.o
>  obj-$(CONFIG_IMX_WEIM)	+= imx-weim.o
>  obj-$(CONFIG_MVEBU_MBUS) += mvebu-mbus.o
> -obj-$(CONFIG_OMAP_OCP2SCP)	+= omap-ocp2scp.o
I guess this is unrelated to $subject. Shouldn't this be dropped?

Thanks and regards,
Lokesh
> +
> +obj-$(CONFIG_OMAP_GPMC)		+= omap-gpmc.o
>  
>  # Interconnect bus driver for OMAP SoCs.
>  obj-$(CONFIG_OMAP_INTERCONNECT)	+= omap_l3_smx.o omap_l3_noc.o
> diff --git a/arch/arm/mach-omap2/gpmc.c b/drivers/bus/omap-gpmc.c
> similarity index 100%
> rename from arch/arm/mach-omap2/gpmc.c
> rename to drivers/bus/omap-gpmc.c
> 


WARNING: multiple messages have this Message-ID (diff)
From: lokeshvutla@ti.com (Lokesh Vutla)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 3/3] drivers: bus: Move omap gpmc code to live under drivers
Date: Fri, 21 Nov 2014 13:35:58 +0530	[thread overview]
Message-ID: <546EF266.1010901@ti.com> (raw)
In-Reply-To: <1416522501-14999-4-git-send-email-tony@atomide.com>

Hi Tony,

On Friday 21 November 2014 03:58 AM, Tony Lindgren wrote:
> Just move to drivers as further clean-up can now happen there
> finally.
> 
> Cc: Arnd Bergmann <arnd@arndb.de>
> Cc: Roger Quadros <rogerq@ti.com>
> Signed-off-by: Tony Lindgren <tony@atomide.com>
> ---
>  arch/arm/mach-omap2/Kconfig                           | 1 +
>  arch/arm/mach-omap2/Makefile                          | 2 +-
>  drivers/bus/Kconfig                                   | 3 +++
>  drivers/bus/Makefile                                  | 3 ++-
>  arch/arm/mach-omap2/gpmc.c => drivers/bus/omap-gpmc.c | 0
>  5 files changed, 7 insertions(+), 2 deletions(-)
>  rename arch/arm/mach-omap2/gpmc.c => drivers/bus/omap-gpmc.c (100%)
> 
> diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
> index f4d06ae..3021901 100644
> --- a/arch/arm/mach-omap2/Kconfig
> +++ b/arch/arm/mach-omap2/Kconfig
> @@ -80,6 +80,7 @@ config ARCH_OMAP2PLUS
>  	select GENERIC_IRQ_CHIP
>  	select MACH_OMAP_GENERIC
>  	select OMAP_DM_TIMER
> +	select OMAP_GPMC
>  	select PINCTRL
>  	select SOC_BUS
>  	select TI_PRIV_EDMA
> diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
> index 3e824f8..bd85741 100644
> --- a/arch/arm/mach-omap2/Makefile
> +++ b/arch/arm/mach-omap2/Makefile
> @@ -6,7 +6,7 @@ ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include \
>  	-I$(srctree)/arch/arm/plat-omap/include
>  
>  # Common support
> -obj-y := id.o io.o control.o mux.o devices.o fb.o serial.o gpmc.o timer.o pm.o \
> +obj-y := id.o io.o control.o mux.o devices.o fb.o serial.o timer.o pm.o \
>  	 common.o gpio.o dma.o wd_timer.o display.o i2c.o hdq1w.o omap_hwmod.o \
>  	 omap_device.o sram.o drm.o
>  
> diff --git a/drivers/bus/Kconfig b/drivers/bus/Kconfig
> index 603eb1b..09aacc8 100644
> --- a/drivers/bus/Kconfig
> +++ b/drivers/bus/Kconfig
> @@ -27,6 +27,9 @@ config MVEBU_MBUS
>  	  Driver needed for the MBus configuration on Marvell EBU SoCs
>  	  (Kirkwood, Dove, Orion5x, MV78XX0 and Armada 370/XP).
>  
> +config OMAP_GPMC
> +	bool
> +
>  config OMAP_OCP2SCP
>  	tristate "OMAP OCP2SCP DRIVER"
>  	depends on ARCH_OMAP2PLUS
> diff --git a/drivers/bus/Makefile b/drivers/bus/Makefile
> index 2973c18..96e77dd 100644
> --- a/drivers/bus/Makefile
> +++ b/drivers/bus/Makefile
> @@ -5,7 +5,8 @@
>  obj-$(CONFIG_BRCMSTB_GISB_ARB)	+= brcmstb_gisb.o
>  obj-$(CONFIG_IMX_WEIM)	+= imx-weim.o
>  obj-$(CONFIG_MVEBU_MBUS) += mvebu-mbus.o
> -obj-$(CONFIG_OMAP_OCP2SCP)	+= omap-ocp2scp.o
I guess this is unrelated to $subject. Shouldn't this be dropped?

Thanks and regards,
Lokesh
> +
> +obj-$(CONFIG_OMAP_GPMC)		+= omap-gpmc.o
>  
>  # Interconnect bus driver for OMAP SoCs.
>  obj-$(CONFIG_OMAP_INTERCONNECT)	+= omap_l3_smx.o omap_l3_noc.o
> diff --git a/arch/arm/mach-omap2/gpmc.c b/drivers/bus/omap-gpmc.c
> similarity index 100%
> rename from arch/arm/mach-omap2/gpmc.c
> rename to drivers/bus/omap-gpmc.c
> 

  reply	other threads:[~2014-11-21  8:07 UTC|newest]

Thread overview: 28+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-11-20 22:28 [PATCH 0/3] Move omap GPMC to live in drivers/bus Tony Lindgren
2014-11-20 22:28 ` Tony Lindgren
2014-11-20 22:28 ` [PATCH 1/3] ARM: OMAP2+: Prepare to move GPMC to drivers by platform data header Tony Lindgren
2014-11-20 22:28   ` Tony Lindgren
2014-11-21  9:28   ` Roger Quadros
2014-11-21  9:28     ` Roger Quadros
2014-11-21 16:15     ` Tony Lindgren
2014-11-21 16:15       ` Tony Lindgren
2014-11-21 16:55       ` Tony Lindgren
2014-11-21 16:55         ` Tony Lindgren
2014-11-20 22:28 ` [PATCH 2/3] ARM: OMAP2+: Move GPMC initcall to devices.c Tony Lindgren
2014-11-20 22:28   ` Tony Lindgren
2014-11-21  9:41   ` Roger Quadros
2014-11-21  9:41     ` Roger Quadros
2014-11-21 16:17     ` Tony Lindgren
2014-11-21 16:17       ` Tony Lindgren
2014-11-20 22:28 ` [PATCH 3/3] drivers: bus: Move omap gpmc code to live under drivers Tony Lindgren
2014-11-20 22:28   ` Tony Lindgren
2014-11-21  8:05   ` Lokesh Vutla [this message]
2014-11-21  8:05     ` Lokesh Vutla
2014-11-21 17:18     ` Tony Lindgren
2014-11-21 17:18       ` Tony Lindgren
2014-11-21  9:15   ` Roger Quadros
2014-11-21  9:15     ` Roger Quadros
2014-11-21 11:15     ` Arnd Bergmann
2014-11-21 11:15       ` Arnd Bergmann
2014-11-21 16:18       ` Tony Lindgren
2014-11-21 16:18         ` Tony Lindgren

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=546EF266.1010901@ti.com \
    --to=lokeshvutla@ti.com \
    --cc=arnd@arndb.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=rogerq@ti.com \
    --cc=tony@atomide.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.