[PATCH RESEND v5 0/2] watchdog: Add support for ImgTec PowerDown Controller Watchdog Timer

[PATCH RESEND v5 0/2] watchdog: Add support for ImgTec PowerDown Controller Watchdog Timer

[naidu.tellapati]

From: Jude Abraham <Jude.Abraham@imgtec.com>

This patchset provides support for the PowerDown Controller (PDC) Watchdog Timer
found on Pistachio SOC from Imagination Technologies (ImgTec).

The series is based on 3.18-rc5.

I am re-sending the series with gmail SMTP as we had some problems with
the mail server we used in the previous rounds.

Please review and provide your comments.

Changes from v4:

 * Added warning message if initial timeout is invalid.

Changes from v3:

 * Removed PDC_WD_MAX_DELAY.

 * Removed spinlock.

 * Removed timeout check inside pdc_wdt_set_timeout function.

 * Changed identity to IMG PDC Watchdog.

 * Removed pdc_wdt_set_timeout call from the probe function.

 * Removed pdc_wdt_shutdown function call from pdc_wdt_remove function
   and added pdc_wdt_stop function call instead.

Changes from v2:

 * Removed interrupt.h header file.

 * Removed clock rate-change notifier callback.

Changes from v1:

 * Arranged all include files in alphabetical order.

 * Arranged register field masks/shifts defines next to their
   corresponding register

 * Registered clock rate-change notifier callback.

 * Removed all references to 32 kHz fixed clock rate.
   Now the clock rate is read dynamically using clk_get_rate().

 * Defined a macro PDC_WD_CONFIG_ENABLE.

 * Added code for getting system clock.

 * Moved module_param stuffs next to the corresponding variable defines.

 * Added code in the function pdc_wdt_remove for stopping watchdog.

 * Removed MODULE_ALIAS.

 * Removed few unwanted spaces and unwanted blank lines.

Jude Abraham (2):
  watchdog: ImgTec PDC Watchdog Timer Driver
  DT: watchdog: Add ImgTec PDC Watchdog Timer binding documentation

 .../devicetree/bindings/watchdog/imgpdc-wdt.txt    |   18 ++
 drivers/watchdog/Kconfig                           |   11 +
 drivers/watchdog/Makefile                          |    1 +
 drivers/watchdog/imgpdc_wdt.c                      |  301 ++++++++++++++++++++
 4 files changed, 331 insertions(+), 0 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/watchdog/imgpdc-wdt.txt
 create mode 100644 drivers/watchdog/imgpdc_wdt.c

[PATCH RESEND v5 0/2] watchdog: Add support for ImgTec PowerDown Controller Watchdog Timer

[naidu.tellapati-Re5JQEeQqe8AvxtiuMwx3w]

From: Jude Abraham <Jude.Abraham-1AXoQHu6uovQT0dZR+AlfA@public.gmane.org>

This patchset provides support for the PowerDown Controller (PDC) Watchdog Timer
found on Pistachio SOC from Imagination Technologies (ImgTec).

The series is based on 3.18-rc5.

I am re-sending the series with gmail SMTP as we had some problems with
the mail server we used in the previous rounds.

Please review and provide your comments.

Changes from v4:

 * Added warning message if initial timeout is invalid.

Changes from v3:

 * Removed PDC_WD_MAX_DELAY.

 * Removed spinlock.

 * Removed timeout check inside pdc_wdt_set_timeout function.

 * Changed identity to IMG PDC Watchdog.

 * Removed pdc_wdt_set_timeout call from the probe function.

 * Removed pdc_wdt_shutdown function call from pdc_wdt_remove function
   and added pdc_wdt_stop function call instead.

Changes from v2:

 * Removed interrupt.h header file.

 * Removed clock rate-change notifier callback.

Changes from v1:

 * Arranged all include files in alphabetical order.

 * Arranged register field masks/shifts defines next to their
   corresponding register

 * Registered clock rate-change notifier callback.

 * Removed all references to 32 kHz fixed clock rate.
   Now the clock rate is read dynamically using clk_get_rate().

 * Defined a macro PDC_WD_CONFIG_ENABLE.

 * Added code for getting system clock.

 * Moved module_param stuffs next to the corresponding variable defines.

 * Added code in the function pdc_wdt_remove for stopping watchdog.

 * Removed MODULE_ALIAS.

 * Removed few unwanted spaces and unwanted blank lines.

Jude Abraham (2):
  watchdog: ImgTec PDC Watchdog Timer Driver
  DT: watchdog: Add ImgTec PDC Watchdog Timer binding documentation

 .../devicetree/bindings/watchdog/imgpdc-wdt.txt    |   18 ++
 drivers/watchdog/Kconfig                           |   11 +
 drivers/watchdog/Makefile                          |    1 +
 drivers/watchdog/imgpdc_wdt.c                      |  301 ++++++++++++++++++++
 4 files changed, 331 insertions(+), 0 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/watchdog/imgpdc-wdt.txt
 create mode 100644 drivers/watchdog/imgpdc_wdt.c

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH RESEND v5 1/2] watchdog: ImgTec PDC Watchdog Timer Driver

[naidu.tellapati]

From: Jude Abraham <Jude.Abraham@imgtec.com>

This commit adds support for ImgTec PowerDown Controller Watchdog Timer.

Signed-off-by: Jude Abraham <Jude.Abraham@imgtec.com>
Signed-off-by: Naidu Tellapati <Naidu.Tellapati@imgtec.com>
Reviewed-by: Andrew Bresticker <abrestic@chromium.org>
---
 drivers/watchdog/Kconfig      |   11 ++
 drivers/watchdog/Makefile     |    1 +
 drivers/watchdog/imgpdc_wdt.c |  301 +++++++++++++++++++++++++++++++++++++++++
 3 files changed, 313 insertions(+), 0 deletions(-)
 create mode 100644 drivers/watchdog/imgpdc_wdt.c

diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index d0107d4..a184f23 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -1235,6 +1235,17 @@ config BCM_KONA_WDT_DEBUG
 
 	  If in doubt, say 'N'.
 
+config IMGPDC_WDT
+	tristate "Imagination Technologies PDC Watchdog Timer"
+	depends on HAS_IOMEM
+	depends on METAG || MIPS || COMPILE_TEST
+	help
+	  Driver for Imagination Technologies PowerDown Controller
+	  Watchdog Timer.
+
+	  To compile this driver as a loadable module, choose M here.
+	  The module will be called imgpdc_wdt.
+
 config LANTIQ_WDT
 	tristate "Lantiq SoC watchdog"
 	depends on LANTIQ
diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
index c569ec8..d4dfbb4 100644
--- a/drivers/watchdog/Makefile
+++ b/drivers/watchdog/Makefile
@@ -142,6 +142,7 @@ obj-$(CONFIG_OCTEON_WDT) += octeon-wdt.o
 octeon-wdt-y := octeon-wdt-main.o octeon-wdt-nmi.o
 obj-$(CONFIG_LANTIQ_WDT) += lantiq_wdt.o
 obj-$(CONFIG_RALINK_WDT) += rt2880_wdt.o
+obj-$(CONFIG_IMGPDC_WDT) += imgpdc_wdt.o
 
 # PARISC Architecture
 
diff --git a/drivers/watchdog/imgpdc_wdt.c b/drivers/watchdog/imgpdc_wdt.c
new file mode 100644
index 0000000..2dc6823
--- /dev/null
+++ b/drivers/watchdog/imgpdc_wdt.c
@@ -0,0 +1,301 @@
+/*
+ * Imagination Technologies PowerDown Controller Watchdog Timer.
+ *
+ * Copyright (c) 2014 Imagination Technologies Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * Based on drivers/watchdog/sunxi_wdt.c Copyright (c) 2013 Carlo Caione
+ *                                                     2012 Henrik Nordstrom
+ */
+
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/log2.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/watchdog.h>
+
+/* registers */
+#define PDC_WD_SW_RESET			0x000
+
+#define PDC_WD_CONFIG			0x004
+#define PDC_WD_CONFIG_ENABLE		BIT(31)
+#define PDC_WD_CONFIG_DELAY_MASK	0x0000001f
+#define PDC_WD_CONFIG_DELAY_SHIFT	0
+
+#define PDC_WD_TICKLE1			0x008
+#define PDC_WD_TICKLE1_MAGIC		0xabcd1234
+
+#define PDC_WD_TICKLE2			0x00c
+#define PDC_WD_TICKLE2_MAGIC		0x4321dcba
+
+#define PDC_WD_TICKLE_STATUS_MASK	0x00000007
+#define PDC_WD_TICKLE_STATUS_SHIFT	0
+#define PDC_WD_TICKLE_STATUS_HRESET     0x0  /* Hard reset */
+#define PDC_WD_TICKLE_STATUS_TIMEOUT    0x1  /* Timeout */
+#define PDC_WD_TICKLE_STATUS_TICKLE     0x2  /* Tickled incorrectly */
+#define PDC_WD_TICKLE_STATUS_SRESET     0x3  /* Soft reset */
+#define PDC_WD_TICKLE_STATUS_USER       0x4  /* User reset */
+
+/* timeout in seconds */
+#define PDC_WD_MIN_TIMEOUT		1
+#define PDC_WD_DEFAULT_TIMEOUT		64
+
+static int timeout = PDC_WD_DEFAULT_TIMEOUT;
+module_param(timeout, int, 0);
+MODULE_PARM_DESC(timeout, "PDC watchdog delay in seconds (default 64s)");
+
+static bool nowayout = WATCHDOG_NOWAYOUT;
+module_param(nowayout, bool, 0);
+MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started");
+
+struct pdc_wdt_dev {
+	struct device *dev;
+	struct watchdog_device wdt_dev;
+	struct clk *wdt_clk;
+	struct clk *sys_clk;
+	unsigned long clk_rate;
+	int min_delay;
+	void __iomem *base;
+};
+
+static int pdc_wdt_keepalive(struct watchdog_device *wdt_dev)
+{
+	struct pdc_wdt_dev *wdt = watchdog_get_drvdata(wdt_dev);
+
+	writel(PDC_WD_TICKLE1_MAGIC, wdt->base + PDC_WD_TICKLE1);
+	writel(PDC_WD_TICKLE2_MAGIC, wdt->base + PDC_WD_TICKLE2);
+
+	return 0;
+}
+
+static int pdc_wdt_stop(struct watchdog_device *wdt_dev)
+{
+	unsigned int val;
+	struct pdc_wdt_dev *wdt = watchdog_get_drvdata(wdt_dev);
+
+	val = readl(wdt->base + PDC_WD_CONFIG);
+	val &= ~PDC_WD_CONFIG_ENABLE;
+	writel(val, wdt->base + PDC_WD_CONFIG);
+
+	/* Must tickle to finish the stop */
+	pdc_wdt_keepalive(wdt_dev);
+
+	return 0;
+}
+
+static int pdc_wdt_set_timeout(struct watchdog_device *wdt_dev,
+			       unsigned int new_timeout)
+{
+	unsigned int val;
+	struct pdc_wdt_dev *wdt = watchdog_get_drvdata(wdt_dev);
+
+	wdt->wdt_dev.timeout = new_timeout;
+	/* round up to the next power of 2 */
+	new_timeout = order_base_2(new_timeout);
+	val = readl(wdt->base + PDC_WD_CONFIG);
+	val &= ~PDC_WD_CONFIG_DELAY_MASK;
+	val |= (new_timeout + wdt->min_delay) << PDC_WD_CONFIG_DELAY_SHIFT;
+	writel(val, wdt->base + PDC_WD_CONFIG);
+
+	return 0;
+}
+
+/* Start the watchdog timer (delay should already be set */
+static int pdc_wdt_start(struct watchdog_device *wdt_dev)
+{
+	unsigned int val;
+	struct pdc_wdt_dev *wdt = watchdog_get_drvdata(wdt_dev);
+
+	val = readl(wdt->base + PDC_WD_CONFIG);
+	val |= PDC_WD_CONFIG_ENABLE;
+	writel(val, wdt->base + PDC_WD_CONFIG);
+
+	return 0;
+}
+
+static struct watchdog_info pdc_wdt_info = {
+	.identity	= "IMG PDC Watchdog",
+	.options	= WDIOF_SETTIMEOUT |
+			  WDIOF_KEEPALIVEPING |
+			  WDIOF_MAGICCLOSE,
+};
+
+/* Kernel interface */
+static const struct watchdog_ops pdc_wdt_ops = {
+	.owner		= THIS_MODULE,
+	.start		= pdc_wdt_start,
+	.stop		= pdc_wdt_stop,
+	.ping		= pdc_wdt_keepalive,
+	.set_timeout	= pdc_wdt_set_timeout,
+};
+
+static int pdc_wdt_probe(struct platform_device *pdev)
+{
+	int ret, val;
+	struct resource *res;
+	struct pdc_wdt_dev *pdc_wdt;
+
+	pdc_wdt = devm_kzalloc(&pdev->dev, sizeof(*pdc_wdt), GFP_KERNEL);
+	if (!pdc_wdt)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	pdc_wdt->base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(pdc_wdt->base))
+		return PTR_ERR(pdc_wdt->base);
+
+	pdc_wdt->sys_clk = devm_clk_get(&pdev->dev, "sys");
+	if (IS_ERR(pdc_wdt->sys_clk)) {
+		dev_err(&pdev->dev, "failed to get the sys clock.\n");
+		ret = PTR_ERR(pdc_wdt->wdt_clk);
+		goto out_wdt;
+	}
+
+	pdc_wdt->wdt_clk = devm_clk_get(&pdev->dev, "wdt");
+	if (IS_ERR(pdc_wdt->wdt_clk)) {
+		dev_err(&pdev->dev, "failed to get the wdt clock.\n");
+		ret = PTR_ERR(pdc_wdt->wdt_clk);
+		goto out_wdt;
+	}
+
+	ret = clk_prepare_enable(pdc_wdt->sys_clk);
+	if (ret) {
+		dev_err(&pdev->dev, "could not prepare or enable sys clock.\n");
+		goto out_wdt;
+	}
+
+	ret = clk_prepare_enable(pdc_wdt->wdt_clk);
+	if (ret) {
+		dev_err(&pdev->dev, "could not prepare or enable wdt clock.\n");
+		goto disable_sys_clk;
+	}
+
+	/* We use the clock rate to calculate the max timeout */
+	pdc_wdt->clk_rate = clk_get_rate(pdc_wdt->wdt_clk);
+	if (pdc_wdt->clk_rate == 0) {
+		dev_err(&pdev->dev, "failed to get clock rate\n");
+		ret = -EINVAL;
+		goto disable_wdt_clk;
+	}
+
+	if (order_base_2(pdc_wdt->clk_rate) > PDC_WD_CONFIG_DELAY_MASK + 1) {
+		dev_err(&pdev->dev, "invalid clock rate\n");
+		ret = -EINVAL;
+		goto disable_wdt_clk;
+	}
+
+	if (order_base_2(pdc_wdt->clk_rate) == 0)
+		pdc_wdt->wdt_dev.min_timeout = PDC_WD_MIN_TIMEOUT + 1;
+	else
+		pdc_wdt->wdt_dev.min_timeout = PDC_WD_MIN_TIMEOUT;
+
+	pdc_wdt->min_delay = order_base_2(pdc_wdt->clk_rate) - 1;
+
+	pdc_wdt->wdt_dev.info = &pdc_wdt_info;
+	pdc_wdt->wdt_dev.ops = &pdc_wdt_ops;
+	pdc_wdt->wdt_dev.max_timeout =
+			(1 << (PDC_WD_CONFIG_DELAY_MASK - pdc_wdt->min_delay));
+	pdc_wdt->wdt_dev.parent = &pdev->dev;
+	pdc_wdt->dev = &pdev->dev;
+
+	ret = watchdog_init_timeout(&pdc_wdt->wdt_dev, timeout, &pdev->dev);
+	if (ret < 0) {
+		pdc_wdt->wdt_dev.timeout = pdc_wdt->wdt_dev.max_timeout;
+		dev_warn(&pdev->dev,
+			 "Initial timeout out of range! setting max timeout\n");
+	}
+
+	pdc_wdt_stop(&pdc_wdt->wdt_dev);
+
+	/* Find what caused the last reset */
+	val = readl(pdc_wdt->base + PDC_WD_TICKLE1);
+	val = (val & PDC_WD_TICKLE_STATUS_MASK) >> PDC_WD_TICKLE_STATUS_SHIFT;
+	switch (val) {
+	case PDC_WD_TICKLE_STATUS_TICKLE:
+	case PDC_WD_TICKLE_STATUS_TIMEOUT:
+		pdc_wdt->wdt_dev.bootstatus |= WDIOF_CARDRESET;
+		dev_info(&pdev->dev,
+			 "watchdog module last reset due to timeout\n");
+		break;
+	case PDC_WD_TICKLE_STATUS_HRESET:
+		dev_info(&pdev->dev,
+			 "watchdog module last reset due to hard reset\n");
+		break;
+	case PDC_WD_TICKLE_STATUS_SRESET:
+		dev_info(&pdev->dev,
+			 "watchdog module last reset due to soft reset\n");
+		break;
+	case PDC_WD_TICKLE_STATUS_USER:
+		dev_info(&pdev->dev,
+			 "watchdog module last reset due to user reset\n");
+		break;
+	default:
+		dev_info(&pdev->dev,
+			 "contains an illegal status code (%08x)\n", val);
+		break;
+	}
+
+	watchdog_set_nowayout(&pdc_wdt->wdt_dev, nowayout);
+
+	platform_set_drvdata(pdev, pdc_wdt);
+	watchdog_set_drvdata(&pdc_wdt->wdt_dev, pdc_wdt);
+
+	ret = watchdog_register_device(&pdc_wdt->wdt_dev);
+	if (ret)
+		goto disable_wdt_clk;
+
+	return 0;
+
+disable_wdt_clk:
+	clk_disable_unprepare(pdc_wdt->wdt_clk);
+disable_sys_clk:
+	clk_disable_unprepare(pdc_wdt->sys_clk);
+out_wdt:
+	return ret;
+}
+
+static void pdc_wdt_shutdown(struct platform_device *pdev)
+{
+	struct pdc_wdt_dev *pdc_wdt = platform_get_drvdata(pdev);
+
+	pdc_wdt_stop(&pdc_wdt->wdt_dev);
+}
+
+static int pdc_wdt_remove(struct platform_device *pdev)
+{
+	struct pdc_wdt_dev *pdc_wdt = platform_get_drvdata(pdev);
+
+	pdc_wdt_stop(&pdc_wdt->wdt_dev);
+	watchdog_unregister_device(&pdc_wdt->wdt_dev);
+	clk_disable_unprepare(pdc_wdt->wdt_clk);
+	clk_disable_unprepare(pdc_wdt->sys_clk);
+
+	return 0;
+}
+
+static const struct of_device_id pdc_wdt_match[] = {
+	{ .compatible = "img,pdc-wdt" },
+	{}
+};
+MODULE_DEVICE_TABLE(of, pdc_wdt_match);
+
+static struct platform_driver pdc_wdt_driver = {
+	.driver = {
+		.name = "imgpdc-wdt",
+		.of_match_table	= pdc_wdt_match,
+	},
+	.probe = pdc_wdt_probe,
+	.remove = pdc_wdt_remove,
+	.shutdown = pdc_wdt_shutdown,
+};
+module_platform_driver(pdc_wdt_driver);
+
+MODULE_AUTHOR("Jude Abraham <Jude.Abraham@imgtec.com>");
+MODULE_AUTHOR("Naidu Tellapati <Naidu.Tellapati@imgtec.com>");
+MODULE_DESCRIPTION("Imagination Technologies PDC Watchdog Timer Driver");
+MODULE_LICENSE("GPL v2");
-- 
1.7.0.4

[PATCH RESEND v5 1/2] watchdog: ImgTec PDC Watchdog Timer Driver

[naidu.tellapati-Re5JQEeQqe8AvxtiuMwx3w]

From: Jude Abraham <Jude.Abraham-1AXoQHu6uovQT0dZR+AlfA@public.gmane.org>

This commit adds support for ImgTec PowerDown Controller Watchdog Timer.

Signed-off-by: Jude Abraham <Jude.Abraham-1AXoQHu6uovQT0dZR+AlfA@public.gmane.org>
Signed-off-by: Naidu Tellapati <Naidu.Tellapati-1AXoQHu6uovQT0dZR+AlfA@public.gmane.org>
Reviewed-by: Andrew Bresticker <abrestic-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org>
---
 drivers/watchdog/Kconfig      |   11 ++
 drivers/watchdog/Makefile     |    1 +
 drivers/watchdog/imgpdc_wdt.c |  301 +++++++++++++++++++++++++++++++++++++++++
 3 files changed, 313 insertions(+), 0 deletions(-)
 create mode 100644 drivers/watchdog/imgpdc_wdt.c

diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index d0107d4..a184f23 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -1235,6 +1235,17 @@ config BCM_KONA_WDT_DEBUG
 
 	  If in doubt, say 'N'.
 
+config IMGPDC_WDT
+	tristate "Imagination Technologies PDC Watchdog Timer"
+	depends on HAS_IOMEM
+	depends on METAG || MIPS || COMPILE_TEST
+	help
+	  Driver for Imagination Technologies PowerDown Controller
+	  Watchdog Timer.
+
+	  To compile this driver as a loadable module, choose M here.
+	  The module will be called imgpdc_wdt.
+
 config LANTIQ_WDT
 	tristate "Lantiq SoC watchdog"
 	depends on LANTIQ
diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
index c569ec8..d4dfbb4 100644
--- a/drivers/watchdog/Makefile
+++ b/drivers/watchdog/Makefile
@@ -142,6 +142,7 @@ obj-$(CONFIG_OCTEON_WDT) += octeon-wdt.o
 octeon-wdt-y := octeon-wdt-main.o octeon-wdt-nmi.o
 obj-$(CONFIG_LANTIQ_WDT) += lantiq_wdt.o
 obj-$(CONFIG_RALINK_WDT) += rt2880_wdt.o
+obj-$(CONFIG_IMGPDC_WDT) += imgpdc_wdt.o
 
 # PARISC Architecture
 
diff --git a/drivers/watchdog/imgpdc_wdt.c b/drivers/watchdog/imgpdc_wdt.c
new file mode 100644
index 0000000..2dc6823
--- /dev/null
+++ b/drivers/watchdog/imgpdc_wdt.c
@@ -0,0 +1,301 @@
+/*
+ * Imagination Technologies PowerDown Controller Watchdog Timer.
+ *
+ * Copyright (c) 2014 Imagination Technologies Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * Based on drivers/watchdog/sunxi_wdt.c Copyright (c) 2013 Carlo Caione
+ *                                                     2012 Henrik Nordstrom
+ */
+
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/log2.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/watchdog.h>
+
+/* registers */
+#define PDC_WD_SW_RESET			0x000
+
+#define PDC_WD_CONFIG			0x004
+#define PDC_WD_CONFIG_ENABLE		BIT(31)
+#define PDC_WD_CONFIG_DELAY_MASK	0x0000001f
+#define PDC_WD_CONFIG_DELAY_SHIFT	0
+
+#define PDC_WD_TICKLE1			0x008
+#define PDC_WD_TICKLE1_MAGIC		0xabcd1234
+
+#define PDC_WD_TICKLE2			0x00c
+#define PDC_WD_TICKLE2_MAGIC		0x4321dcba
+
+#define PDC_WD_TICKLE_STATUS_MASK	0x00000007
+#define PDC_WD_TICKLE_STATUS_SHIFT	0
+#define PDC_WD_TICKLE_STATUS_HRESET     0x0  /* Hard reset */
+#define PDC_WD_TICKLE_STATUS_TIMEOUT    0x1  /* Timeout */
+#define PDC_WD_TICKLE_STATUS_TICKLE     0x2  /* Tickled incorrectly */
+#define PDC_WD_TICKLE_STATUS_SRESET     0x3  /* Soft reset */
+#define PDC_WD_TICKLE_STATUS_USER       0x4  /* User reset */
+
+/* timeout in seconds */
+#define PDC_WD_MIN_TIMEOUT		1
+#define PDC_WD_DEFAULT_TIMEOUT		64
+
+static int timeout = PDC_WD_DEFAULT_TIMEOUT;
+module_param(timeout, int, 0);
+MODULE_PARM_DESC(timeout, "PDC watchdog delay in seconds (default 64s)");
+
+static bool nowayout = WATCHDOG_NOWAYOUT;
+module_param(nowayout, bool, 0);
+MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started");
+
+struct pdc_wdt_dev {
+	struct device *dev;
+	struct watchdog_device wdt_dev;
+	struct clk *wdt_clk;
+	struct clk *sys_clk;
+	unsigned long clk_rate;
+	int min_delay;
+	void __iomem *base;
+};
+
+static int pdc_wdt_keepalive(struct watchdog_device *wdt_dev)
+{
+	struct pdc_wdt_dev *wdt = watchdog_get_drvdata(wdt_dev);
+
+	writel(PDC_WD_TICKLE1_MAGIC, wdt->base + PDC_WD_TICKLE1);
+	writel(PDC_WD_TICKLE2_MAGIC, wdt->base + PDC_WD_TICKLE2);
+
+	return 0;
+}
+
+static int pdc_wdt_stop(struct watchdog_device *wdt_dev)
+{
+	unsigned int val;
+	struct pdc_wdt_dev *wdt = watchdog_get_drvdata(wdt_dev);
+
+	val = readl(wdt->base + PDC_WD_CONFIG);
+	val &= ~PDC_WD_CONFIG_ENABLE;
+	writel(val, wdt->base + PDC_WD_CONFIG);
+
+	/* Must tickle to finish the stop */
+	pdc_wdt_keepalive(wdt_dev);
+
+	return 0;
+}
+
+static int pdc_wdt_set_timeout(struct watchdog_device *wdt_dev,
+			       unsigned int new_timeout)
+{
+	unsigned int val;
+	struct pdc_wdt_dev *wdt = watchdog_get_drvdata(wdt_dev);
+
+	wdt->wdt_dev.timeout = new_timeout;
+	/* round up to the next power of 2 */
+	new_timeout = order_base_2(new_timeout);
+	val = readl(wdt->base + PDC_WD_CONFIG);
+	val &= ~PDC_WD_CONFIG_DELAY_MASK;
+	val |= (new_timeout + wdt->min_delay) << PDC_WD_CONFIG_DELAY_SHIFT;
+	writel(val, wdt->base + PDC_WD_CONFIG);
+
+	return 0;
+}
+
+/* Start the watchdog timer (delay should already be set */
+static int pdc_wdt_start(struct watchdog_device *wdt_dev)
+{
+	unsigned int val;
+	struct pdc_wdt_dev *wdt = watchdog_get_drvdata(wdt_dev);
+
+	val = readl(wdt->base + PDC_WD_CONFIG);
+	val |= PDC_WD_CONFIG_ENABLE;
+	writel(val, wdt->base + PDC_WD_CONFIG);
+
+	return 0;
+}
+
+static struct watchdog_info pdc_wdt_info = {
+	.identity	= "IMG PDC Watchdog",
+	.options	= WDIOF_SETTIMEOUT |
+			  WDIOF_KEEPALIVEPING |
+			  WDIOF_MAGICCLOSE,
+};
+
+/* Kernel interface */
+static const struct watchdog_ops pdc_wdt_ops = {
+	.owner		= THIS_MODULE,
+	.start		= pdc_wdt_start,
+	.stop		= pdc_wdt_stop,
+	.ping		= pdc_wdt_keepalive,
+	.set_timeout	= pdc_wdt_set_timeout,
+};
+
+static int pdc_wdt_probe(struct platform_device *pdev)
+{
+	int ret, val;
+	struct resource *res;
+	struct pdc_wdt_dev *pdc_wdt;
+
+	pdc_wdt = devm_kzalloc(&pdev->dev, sizeof(*pdc_wdt), GFP_KERNEL);
+	if (!pdc_wdt)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	pdc_wdt->base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(pdc_wdt->base))
+		return PTR_ERR(pdc_wdt->base);
+
+	pdc_wdt->sys_clk = devm_clk_get(&pdev->dev, "sys");
+	if (IS_ERR(pdc_wdt->sys_clk)) {
+		dev_err(&pdev->dev, "failed to get the sys clock.\n");
+		ret = PTR_ERR(pdc_wdt->wdt_clk);
+		goto out_wdt;
+	}
+
+	pdc_wdt->wdt_clk = devm_clk_get(&pdev->dev, "wdt");
+	if (IS_ERR(pdc_wdt->wdt_clk)) {
+		dev_err(&pdev->dev, "failed to get the wdt clock.\n");
+		ret = PTR_ERR(pdc_wdt->wdt_clk);
+		goto out_wdt;
+	}
+
+	ret = clk_prepare_enable(pdc_wdt->sys_clk);
+	if (ret) {
+		dev_err(&pdev->dev, "could not prepare or enable sys clock.\n");
+		goto out_wdt;
+	}
+
+	ret = clk_prepare_enable(pdc_wdt->wdt_clk);
+	if (ret) {
+		dev_err(&pdev->dev, "could not prepare or enable wdt clock.\n");
+		goto disable_sys_clk;
+	}
+
+	/* We use the clock rate to calculate the max timeout */
+	pdc_wdt->clk_rate = clk_get_rate(pdc_wdt->wdt_clk);
+	if (pdc_wdt->clk_rate == 0) {
+		dev_err(&pdev->dev, "failed to get clock rate\n");
+		ret = -EINVAL;
+		goto disable_wdt_clk;
+	}
+
+	if (order_base_2(pdc_wdt->clk_rate) > PDC_WD_CONFIG_DELAY_MASK + 1) {
+		dev_err(&pdev->dev, "invalid clock rate\n");
+		ret = -EINVAL;
+		goto disable_wdt_clk;
+	}
+
+	if (order_base_2(pdc_wdt->clk_rate) == 0)
+		pdc_wdt->wdt_dev.min_timeout = PDC_WD_MIN_TIMEOUT + 1;
+	else
+		pdc_wdt->wdt_dev.min_timeout = PDC_WD_MIN_TIMEOUT;
+
+	pdc_wdt->min_delay = order_base_2(pdc_wdt->clk_rate) - 1;
+
+	pdc_wdt->wdt_dev.info = &pdc_wdt_info;
+	pdc_wdt->wdt_dev.ops = &pdc_wdt_ops;
+	pdc_wdt->wdt_dev.max_timeout =
+			(1 << (PDC_WD_CONFIG_DELAY_MASK - pdc_wdt->min_delay));
+	pdc_wdt->wdt_dev.parent = &pdev->dev;
+	pdc_wdt->dev = &pdev->dev;
+
+	ret = watchdog_init_timeout(&pdc_wdt->wdt_dev, timeout, &pdev->dev);
+	if (ret < 0) {
+		pdc_wdt->wdt_dev.timeout = pdc_wdt->wdt_dev.max_timeout;
+		dev_warn(&pdev->dev,
+			 "Initial timeout out of range! setting max timeout\n");
+	}
+
+	pdc_wdt_stop(&pdc_wdt->wdt_dev);
+
+	/* Find what caused the last reset */
+	val = readl(pdc_wdt->base + PDC_WD_TICKLE1);
+	val = (val & PDC_WD_TICKLE_STATUS_MASK) >> PDC_WD_TICKLE_STATUS_SHIFT;
+	switch (val) {
+	case PDC_WD_TICKLE_STATUS_TICKLE:
+	case PDC_WD_TICKLE_STATUS_TIMEOUT:
+		pdc_wdt->wdt_dev.bootstatus |= WDIOF_CARDRESET;
+		dev_info(&pdev->dev,
+			 "watchdog module last reset due to timeout\n");
+		break;
+	case PDC_WD_TICKLE_STATUS_HRESET:
+		dev_info(&pdev->dev,
+			 "watchdog module last reset due to hard reset\n");
+		break;
+	case PDC_WD_TICKLE_STATUS_SRESET:
+		dev_info(&pdev->dev,
+			 "watchdog module last reset due to soft reset\n");
+		break;
+	case PDC_WD_TICKLE_STATUS_USER:
+		dev_info(&pdev->dev,
+			 "watchdog module last reset due to user reset\n");
+		break;
+	default:
+		dev_info(&pdev->dev,
+			 "contains an illegal status code (%08x)\n", val);
+		break;
+	}
+
+	watchdog_set_nowayout(&pdc_wdt->wdt_dev, nowayout);
+
+	platform_set_drvdata(pdev, pdc_wdt);
+	watchdog_set_drvdata(&pdc_wdt->wdt_dev, pdc_wdt);
+
+	ret = watchdog_register_device(&pdc_wdt->wdt_dev);
+	if (ret)
+		goto disable_wdt_clk;
+
+	return 0;
+
+disable_wdt_clk:
+	clk_disable_unprepare(pdc_wdt->wdt_clk);
+disable_sys_clk:
+	clk_disable_unprepare(pdc_wdt->sys_clk);
+out_wdt:
+	return ret;
+}
+
+static void pdc_wdt_shutdown(struct platform_device *pdev)
+{
+	struct pdc_wdt_dev *pdc_wdt = platform_get_drvdata(pdev);
+
+	pdc_wdt_stop(&pdc_wdt->wdt_dev);
+}
+
+static int pdc_wdt_remove(struct platform_device *pdev)
+{
+	struct pdc_wdt_dev *pdc_wdt = platform_get_drvdata(pdev);
+
+	pdc_wdt_stop(&pdc_wdt->wdt_dev);
+	watchdog_unregister_device(&pdc_wdt->wdt_dev);
+	clk_disable_unprepare(pdc_wdt->wdt_clk);
+	clk_disable_unprepare(pdc_wdt->sys_clk);
+
+	return 0;
+}
+
+static const struct of_device_id pdc_wdt_match[] = {
+	{ .compatible = "img,pdc-wdt" },
+	{}
+};
+MODULE_DEVICE_TABLE(of, pdc_wdt_match);
+
+static struct platform_driver pdc_wdt_driver = {
+	.driver = {
+		.name = "imgpdc-wdt",
+		.of_match_table	= pdc_wdt_match,
+	},
+	.probe = pdc_wdt_probe,
+	.remove = pdc_wdt_remove,
+	.shutdown = pdc_wdt_shutdown,
+};
+module_platform_driver(pdc_wdt_driver);
+
+MODULE_AUTHOR("Jude Abraham <Jude.Abraham-1AXoQHu6uovQT0dZR+AlfA@public.gmane.org>");
+MODULE_AUTHOR("Naidu Tellapati <Naidu.Tellapati-1AXoQHu6uovQT0dZR+AlfA@public.gmane.org>");
+MODULE_DESCRIPTION("Imagination Technologies PDC Watchdog Timer Driver");
+MODULE_LICENSE("GPL v2");
-- 
1.7.0.4

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH RESEND v5 1/2] watchdog: ImgTec PDC Watchdog Timer Driver

[Ezequiel Garcia]

Hi Naidu,

Just a few nitpicks on my side. See below.

On 11/21/2014 04:25 PM, naidu.tellapati@gmail.com wrote:
> From: Jude Abraham <Jude.Abraham@imgtec.com>
> 
> This commit adds support for ImgTec PowerDown Controller Watchdog Timer.
> 
> Signed-off-by: Jude Abraham <Jude.Abraham@imgtec.com>
> Signed-off-by: Naidu Tellapati <Naidu.Tellapati@imgtec.com>
> Reviewed-by: Andrew Bresticker <abrestic@chromium.org>
[..]
> +
> +struct pdc_wdt_dev {
> +	struct device *dev;

'dev' is unused.

> +	struct watchdog_device wdt_dev;
> +	struct clk *wdt_clk;
> +	struct clk *sys_clk;
> +	unsigned long clk_rate;

'clk_rate' is unused.

> +	int min_delay;
> +	void __iomem *base;
> +};
> +
[..]
> +
> +/* Start the watchdog timer (delay should already be set */

Typo here: missing closing parenthesis.

[..]
> +
> +static int pdc_wdt_probe(struct platform_device *pdev)
> +{
> +	int ret, val;
> +	struct resource *res;
> +	struct pdc_wdt_dev *pdc_wdt;
> +
> +	pdc_wdt = devm_kzalloc(&pdev->dev, sizeof(*pdc_wdt), GFP_KERNEL);
> +	if (!pdc_wdt)
> +		return -ENOMEM;
> +
> +	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> +	pdc_wdt->base = devm_ioremap_resource(&pdev->dev, res);
> +	if (IS_ERR(pdc_wdt->base))
> +		return PTR_ERR(pdc_wdt->base);
> +
> +	pdc_wdt->sys_clk = devm_clk_get(&pdev->dev, "sys");
> +	if (IS_ERR(pdc_wdt->sys_clk)) {
> +		dev_err(&pdev->dev, "failed to get the sys clock.\n");
> +		ret = PTR_ERR(pdc_wdt->wdt_clk);
> +		goto out_wdt;

I'd say remove all uses of the out_wdt label and just return ret.

Reviewed-by: Ezequiel Garcia <ezequiel.garcia@imgtec.com>

Wim: Any comments? We're aiming at having this driver merged for v3.19.

Thanks!
-- 
Ezequiel

Re: [PATCH RESEND v5 1/2] watchdog: ImgTec PDC Watchdog Timer Driver

[Ezequiel Garcia]

Hi Naidu,

Just a few nitpicks on my side. See below.

On 11/21/2014 04:25 PM, naidu.tellapati-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org wrote:
> From: Jude Abraham <Jude.Abraham-1AXoQHu6uovQT0dZR+AlfA@public.gmane.org>
> 
> This commit adds support for ImgTec PowerDown Controller Watchdog Timer.
> 
> Signed-off-by: Jude Abraham <Jude.Abraham-1AXoQHu6uovQT0dZR+AlfA@public.gmane.org>
> Signed-off-by: Naidu Tellapati <Naidu.Tellapati-1AXoQHu6uovQT0dZR+AlfA@public.gmane.org>
> Reviewed-by: Andrew Bresticker <abrestic-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org>
[..]
> +
> +struct pdc_wdt_dev {
> +	struct device *dev;

'dev' is unused.

> +	struct watchdog_device wdt_dev;
> +	struct clk *wdt_clk;
> +	struct clk *sys_clk;
> +	unsigned long clk_rate;

'clk_rate' is unused.

> +	int min_delay;
> +	void __iomem *base;
> +};
> +
[..]
> +
> +/* Start the watchdog timer (delay should already be set */

Typo here: missing closing parenthesis.

[..]
> +
> +static int pdc_wdt_probe(struct platform_device *pdev)
> +{
> +	int ret, val;
> +	struct resource *res;
> +	struct pdc_wdt_dev *pdc_wdt;
> +
> +	pdc_wdt = devm_kzalloc(&pdev->dev, sizeof(*pdc_wdt), GFP_KERNEL);
> +	if (!pdc_wdt)
> +		return -ENOMEM;
> +
> +	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> +	pdc_wdt->base = devm_ioremap_resource(&pdev->dev, res);
> +	if (IS_ERR(pdc_wdt->base))
> +		return PTR_ERR(pdc_wdt->base);
> +
> +	pdc_wdt->sys_clk = devm_clk_get(&pdev->dev, "sys");
> +	if (IS_ERR(pdc_wdt->sys_clk)) {
> +		dev_err(&pdev->dev, "failed to get the sys clock.\n");
> +		ret = PTR_ERR(pdc_wdt->wdt_clk);
> +		goto out_wdt;

I'd say remove all uses of the out_wdt label and just return ret.

Reviewed-by: Ezequiel Garcia <ezequiel.garcia-1AXoQHu6uovQT0dZR+AlfA@public.gmane.org>

Wim: Any comments? We're aiming at having this driver merged for v3.19.

Thanks!
-- 
Ezequiel
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH RESEND v5 2/2] DT: watchdog: Add ImgTec PDC Watchdog Timer binding documentation

[naidu.tellapati]

From: Jude Abraham <Jude.Abraham@imgtec.com>

Add the devicetree binding document for ImgTec PDC Watchdog Timer.

Signed-off-by: Jude Abraham <Jude.Abraham@imgtec.com>
Signed-off-by: Naidu Tellapati <Naidu.Tellapati@imgtec.com>
Reviewed-by: Andrew Bresticker <abrestic@chromium.org>
---
No changes from v4.
---
 .../devicetree/bindings/watchdog/imgpdc-wdt.txt    |   18 ++++++++++++++++++
 1 files changed, 18 insertions(+), 0 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/watchdog/imgpdc-wdt.txt

diff --git a/Documentation/devicetree/bindings/watchdog/imgpdc-wdt.txt b/Documentation/devicetree/bindings/watchdog/imgpdc-wdt.txt
new file mode 100644
index 0000000..2f9ba77
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/imgpdc-wdt.txt
@@ -0,0 +1,18 @@
+*ImgTec PowerDown Controller (PDC) Watchdog Timer (WDT)
+
+Required properties:
+- compatible : Should be "img,pdc-wdt"
+- reg : Should contain WDT registers location and length
+- clocks: Must contain an entry for each entry in clock-names.
+- clock-names: Should contain "wdt" and "sys"
+- interrupts : Should contain WDT interrupt
+
+Examples:
+
+wdt@18102100 {
+	compatible = "img,pdc-wdt";
+	reg = <0x18102100 0x100>;
+	clocks = <&pdc_wdt_clk>, <&sys_clk>;
+	clock-names = "wdt", "sys";
+	interrupts = <0 52 IRQ_TYPE_LEVEL_HIGH>;
+};
-- 
1.7.0.4

[PATCH RESEND v5 2/2] DT: watchdog: Add ImgTec PDC Watchdog Timer binding documentation

[naidu.tellapati-Re5JQEeQqe8AvxtiuMwx3w]

From: Jude Abraham <Jude.Abraham-1AXoQHu6uovQT0dZR+AlfA@public.gmane.org>

Add the devicetree binding document for ImgTec PDC Watchdog Timer.

Signed-off-by: Jude Abraham <Jude.Abraham-1AXoQHu6uovQT0dZR+AlfA@public.gmane.org>
Signed-off-by: Naidu Tellapati <Naidu.Tellapati-1AXoQHu6uovQT0dZR+AlfA@public.gmane.org>
Reviewed-by: Andrew Bresticker <abrestic-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org>
---
No changes from v4.
---
 .../devicetree/bindings/watchdog/imgpdc-wdt.txt    |   18 ++++++++++++++++++
 1 files changed, 18 insertions(+), 0 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/watchdog/imgpdc-wdt.txt

diff --git a/Documentation/devicetree/bindings/watchdog/imgpdc-wdt.txt b/Documentation/devicetree/bindings/watchdog/imgpdc-wdt.txt
new file mode 100644
index 0000000..2f9ba77
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/imgpdc-wdt.txt
@@ -0,0 +1,18 @@
+*ImgTec PowerDown Controller (PDC) Watchdog Timer (WDT)
+
+Required properties:
+- compatible : Should be "img,pdc-wdt"
+- reg : Should contain WDT registers location and length
+- clocks: Must contain an entry for each entry in clock-names.
+- clock-names: Should contain "wdt" and "sys"
+- interrupts : Should contain WDT interrupt
+
+Examples:
+
+wdt@18102100 {
+	compatible = "img,pdc-wdt";
+	reg = <0x18102100 0x100>;
+	clocks = <&pdc_wdt_clk>, <&sys_clk>;
+	clock-names = "wdt", "sys";
+	interrupts = <0 52 IRQ_TYPE_LEVEL_HIGH>;
+};
-- 
1.7.0.4

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html