Re: [PATCH RFC 0/3] power: mxs_power: add driver for mxs power subsystem

[Stefan Wahren <stefan.wahren@i2se.com>]

> This patch series adds support for Freescale i.MX23, i.xM28 power subsystem.
>
> The idea for this driver was born in the discussion with Mark Rutland
> about the mxs-regulator driver [1].
>
> The main use is to trigger driver probing of the underlying DT child nodes
> like on-chip regulators. But it's also the first step for cpufreq-dt support.
>
> [1] - https://lkml.org/lkml/2014/9/29/283
>
> Stefan Wahren (3):
>   DT: add binding for mxs power subsystem
>   power: mxs_power: add driver for mxs power subsystem
>   ARM: dts: enable power subsystem for i.MX28
>
>  .../devicetree/bindings/power/mxs_power.txt        |   23 ++
>  arch/arm/boot/dts/imx28.dtsi                       |    6 +-
>  drivers/power/Kconfig                              |    8 +
>  drivers/power/Makefile                             |    1 +
>  drivers/power/mxs_power.c                          |  226 ++++++++++++++++++++
>  5 files changed, 263 insertions(+), 1 deletion(-)
>  create mode 100644 Documentation/devicetree/bindings/power/mxs_power.txt
>  create mode 100644 drivers/power/mxs_power.c
>
> --
> 1.7.9.5
>

Are there any other questions or suggestions about these patch series?

Stefan