All of lore.kernel.org
 help / color / mirror / Atom feed
* [PATCH V3 1/2] x86/mm: fix zone ranges boot printout
@ 2014-12-10  2:09 ` Xishi Qiu
  0 siblings, 0 replies; 4+ messages in thread
From: Xishi Qiu @ 2014-12-10  2:09 UTC (permalink / raw)
  To: Andrew Morton, Ingo Molnar, dave, Rik van Riel, H. Peter Anvin,
	Thomas Gleixner
  Cc: linux-tip-commits, LKML, Linux MM, Xishi Qiu

This is the usual physical memory layout boot printout:
...
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
[    0.000000]   Normal   [mem 0x100000000-0xc3fffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x00099fff]
[    0.000000]   node   0: [mem 0x00100000-0xbf78ffff]
[    0.000000]   node   0: [mem 0x100000000-0x63fffffff]
[    0.000000]   node   1: [mem 0x640000000-0xc3fffffff]
...

This is the log when we set "mem=2G" on the boot cmdline:
...
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]  // should be 0x7fffffff, right?
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x00099fff]
[    0.000000]   node   0: [mem 0x00100000-0x7fffffff]
...

This patch fixes the printout, the following log shows the right ranges:
...
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   DMA32    [mem 0x01000000-0x7fffffff]
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x00099fff]
[    0.000000]   node   0: [mem 0x00100000-0x7fffffff]
...

Signed-off-by: Xishi Qiu <qiuxishi@huawei.com>
Suggested-by: Andrew Morton <akpm@linux-foundation.org>
---
 arch/x86/include/asm/dma.h | 2 +-
 arch/x86/mm/init.c         | 4 ++--
 2 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/x86/include/asm/dma.h b/arch/x86/include/asm/dma.h
index 0bdb0c5..fe884e1 100644
--- a/arch/x86/include/asm/dma.h
+++ b/arch/x86/include/asm/dma.h
@@ -70,7 +70,7 @@
 #define MAX_DMA_CHANNELS	8
 
 /* 16MB ISA DMA zone */
-#define MAX_DMA_PFN   ((16 * 1024 * 1024) >> PAGE_SHIFT)
+#define MAX_DMA_PFN   ((16UL * 1024 * 1024) >> PAGE_SHIFT)
 
 /* 4GB broken PCI/AGP hardware bus master zone */
 #define MAX_DMA32_PFN ((4UL * 1024 * 1024 * 1024) >> PAGE_SHIFT)
diff --git a/arch/x86/mm/init.c b/arch/x86/mm/init.c
index 66dba36..07244aa 100644
--- a/arch/x86/mm/init.c
+++ b/arch/x86/mm/init.c
@@ -674,10 +674,10 @@ void __init zone_sizes_init(void)
 	memset(max_zone_pfns, 0, sizeof(max_zone_pfns));
 
 #ifdef CONFIG_ZONE_DMA
-	max_zone_pfns[ZONE_DMA]		= MAX_DMA_PFN;
+	max_zone_pfns[ZONE_DMA]		= min(MAX_DMA_PFN, max_low_pfn);
 #endif
 #ifdef CONFIG_ZONE_DMA32
-	max_zone_pfns[ZONE_DMA32]	= MAX_DMA32_PFN;
+	max_zone_pfns[ZONE_DMA32]	= min(MAX_DMA32_PFN, max_low_pfn);
 #endif
 	max_zone_pfns[ZONE_NORMAL]	= max_low_pfn;
 #ifdef CONFIG_HIGHMEM
-- 
2.0.0


--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org.  For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>

^ permalink raw reply related	[flat|nested] 4+ messages in thread
* [PATCH V3 1/2] x86/mm: fix zone ranges boot printout
@ 2014-12-10  2:09 ` Xishi Qiu
  0 siblings, 0 replies; 4+ messages in thread
From: Xishi Qiu @ 2014-12-10  2:09 UTC (permalink / raw)
  To: Andrew Morton, Ingo Molnar, dave, Rik van Riel, H. Peter Anvin,
	Thomas Gleixner
  Cc: linux-tip-commits, LKML, Linux MM, Xishi Qiu

This is the usual physical memory layout boot printout:
...
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
[    0.000000]   Normal   [mem 0x100000000-0xc3fffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x00099fff]
[    0.000000]   node   0: [mem 0x00100000-0xbf78ffff]
[    0.000000]   node   0: [mem 0x100000000-0x63fffffff]
[    0.000000]   node   1: [mem 0x640000000-0xc3fffffff]
...

This is the log when we set "mem=2G" on the boot cmdline:
...
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]  // should be 0x7fffffff, right?
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x00099fff]
[    0.000000]   node   0: [mem 0x00100000-0x7fffffff]
...

This patch fixes the printout, the following log shows the right ranges:
...
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   DMA32    [mem 0x01000000-0x7fffffff]
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x00099fff]
[    0.000000]   node   0: [mem 0x00100000-0x7fffffff]
...

Signed-off-by: Xishi Qiu <qiuxishi@huawei.com>
Suggested-by: Andrew Morton <akpm@linux-foundation.org>
---
 arch/x86/include/asm/dma.h | 2 +-
 arch/x86/mm/init.c         | 4 ++--
 2 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/x86/include/asm/dma.h b/arch/x86/include/asm/dma.h
index 0bdb0c5..fe884e1 100644
--- a/arch/x86/include/asm/dma.h
+++ b/arch/x86/include/asm/dma.h
@@ -70,7 +70,7 @@
 #define MAX_DMA_CHANNELS	8
 
 /* 16MB ISA DMA zone */
-#define MAX_DMA_PFN   ((16 * 1024 * 1024) >> PAGE_SHIFT)
+#define MAX_DMA_PFN   ((16UL * 1024 * 1024) >> PAGE_SHIFT)
 
 /* 4GB broken PCI/AGP hardware bus master zone */
 #define MAX_DMA32_PFN ((4UL * 1024 * 1024 * 1024) >> PAGE_SHIFT)
diff --git a/arch/x86/mm/init.c b/arch/x86/mm/init.c
index 66dba36..07244aa 100644
--- a/arch/x86/mm/init.c
+++ b/arch/x86/mm/init.c
@@ -674,10 +674,10 @@ void __init zone_sizes_init(void)
 	memset(max_zone_pfns, 0, sizeof(max_zone_pfns));
 
 #ifdef CONFIG_ZONE_DMA
-	max_zone_pfns[ZONE_DMA]		= MAX_DMA_PFN;
+	max_zone_pfns[ZONE_DMA]		= min(MAX_DMA_PFN, max_low_pfn);
 #endif
 #ifdef CONFIG_ZONE_DMA32
-	max_zone_pfns[ZONE_DMA32]	= MAX_DMA32_PFN;
+	max_zone_pfns[ZONE_DMA32]	= min(MAX_DMA32_PFN, max_low_pfn);
 #endif
 	max_zone_pfns[ZONE_NORMAL]	= max_low_pfn;
 #ifdef CONFIG_HIGHMEM
-- 
2.0.0



^ permalink raw reply related	[flat|nested] 4+ messages in thread
* [tip:x86/urgent] x86/mm: Fix zone ranges boot printout
  2014-12-10  2:09 ` Xishi Qiu
@ 2014-12-11 12:26   ` tip-bot for Xishi Qiu
  -1 siblings, 0 replies; 4+ messages in thread
From: tip-bot for Xishi Qiu @ 2014-12-11 12:26 UTC (permalink / raw)
  To: linux-tip-commits
  Cc: akpm, tglx, qiuxishi, riel, dave, mingo, hpa, linux-mm,
	linux-kernel

Commit-ID:  c072b90c8dfe135072f646cc50b826e30c5aa558
Gitweb:     http://git.kernel.org/tip/c072b90c8dfe135072f646cc50b826e30c5aa558
Author:     Xishi Qiu <qiuxishi@huawei.com>
AuthorDate: Wed, 10 Dec 2014 10:09:01 +0800
Committer:  Ingo Molnar <mingo@kernel.org>
CommitDate: Thu, 11 Dec 2014 11:35:02 +0100

x86/mm: Fix zone ranges boot printout

This is the usual physical memory layout boot printout:
	...
	[    0.000000] Zone ranges:
	[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
	[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
	[    0.000000]   Normal   [mem 0x100000000-0xc3fffffff]
	[    0.000000] Movable zone start for each node
	[    0.000000] Early memory node ranges
	[    0.000000]   node   0: [mem 0x00001000-0x00099fff]
	[    0.000000]   node   0: [mem 0x00100000-0xbf78ffff]
	[    0.000000]   node   0: [mem 0x100000000-0x63fffffff]
	[    0.000000]   node   1: [mem 0x640000000-0xc3fffffff]
	...

This is the log when we set "mem=2G" on the boot cmdline:
	...
	[    0.000000] Zone ranges:
	[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
	[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]  // should be 0x7fffffff, right?
	[    0.000000]   Normal   empty
	[    0.000000] Movable zone start for each node
	[    0.000000] Early memory node ranges
	[    0.000000]   node   0: [mem 0x00001000-0x00099fff]
	[    0.000000]   node   0: [mem 0x00100000-0x7fffffff]
	...

This patch fixes the printout, the following log shows the right
ranges:
	...
	[    0.000000] Zone ranges:
	[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
	[    0.000000]   DMA32    [mem 0x01000000-0x7fffffff]
	[    0.000000]   Normal   empty
	[    0.000000] Movable zone start for each node
	[    0.000000] Early memory node ranges
	[    0.000000]   node   0: [mem 0x00001000-0x00099fff]
	[    0.000000]   node   0: [mem 0x00100000-0x7fffffff]
	...

Suggested-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Xishi Qiu <qiuxishi@huawei.com>
Cc: Linux MM <linux-mm@kvack.org>
Cc: <dave@sr71.net>
Cc: Rik van Riel <riel@redhat.com>
Link: http://lkml.kernel.org/r/5487AB3D.6070306@huawei.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
---
 arch/x86/include/asm/dma.h | 2 +-
 arch/x86/mm/init.c         | 4 ++--
 2 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/x86/include/asm/dma.h b/arch/x86/include/asm/dma.h
index 0bdb0c5..fe884e1 100644
--- a/arch/x86/include/asm/dma.h
+++ b/arch/x86/include/asm/dma.h
@@ -70,7 +70,7 @@
 #define MAX_DMA_CHANNELS	8
 
 /* 16MB ISA DMA zone */
-#define MAX_DMA_PFN   ((16 * 1024 * 1024) >> PAGE_SHIFT)
+#define MAX_DMA_PFN   ((16UL * 1024 * 1024) >> PAGE_SHIFT)
 
 /* 4GB broken PCI/AGP hardware bus master zone */
 #define MAX_DMA32_PFN ((4UL * 1024 * 1024 * 1024) >> PAGE_SHIFT)
diff --git a/arch/x86/mm/init.c b/arch/x86/mm/init.c
index 66dba36..07244aa 100644
--- a/arch/x86/mm/init.c
+++ b/arch/x86/mm/init.c
@@ -674,10 +674,10 @@ void __init zone_sizes_init(void)
 	memset(max_zone_pfns, 0, sizeof(max_zone_pfns));
 
 #ifdef CONFIG_ZONE_DMA
-	max_zone_pfns[ZONE_DMA]		= MAX_DMA_PFN;
+	max_zone_pfns[ZONE_DMA]		= min(MAX_DMA_PFN, max_low_pfn);
 #endif
 #ifdef CONFIG_ZONE_DMA32
-	max_zone_pfns[ZONE_DMA32]	= MAX_DMA32_PFN;
+	max_zone_pfns[ZONE_DMA32]	= min(MAX_DMA32_PFN, max_low_pfn);
 #endif
 	max_zone_pfns[ZONE_NORMAL]	= max_low_pfn;
 #ifdef CONFIG_HIGHMEM

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org.  For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>

^ permalink raw reply related	[flat|nested] 4+ messages in thread
* [tip:x86/urgent] x86/mm: Fix zone ranges boot printout
@ 2014-12-11 12:26   ` tip-bot for Xishi Qiu
  0 siblings, 0 replies; 4+ messages in thread
From: tip-bot for Xishi Qiu @ 2014-12-11 12:26 UTC (permalink / raw)
  To: linux-tip-commits
  Cc: akpm, tglx, qiuxishi, riel, dave, mingo, hpa, linux-mm,
	linux-kernel

Commit-ID:  c072b90c8dfe135072f646cc50b826e30c5aa558
Gitweb:     http://git.kernel.org/tip/c072b90c8dfe135072f646cc50b826e30c5aa558
Author:     Xishi Qiu <qiuxishi@huawei.com>
AuthorDate: Wed, 10 Dec 2014 10:09:01 +0800
Committer:  Ingo Molnar <mingo@kernel.org>
CommitDate: Thu, 11 Dec 2014 11:35:02 +0100

x86/mm: Fix zone ranges boot printout

This is the usual physical memory layout boot printout:
	...
	[    0.000000] Zone ranges:
	[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
	[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
	[    0.000000]   Normal   [mem 0x100000000-0xc3fffffff]
	[    0.000000] Movable zone start for each node
	[    0.000000] Early memory node ranges
	[    0.000000]   node   0: [mem 0x00001000-0x00099fff]
	[    0.000000]   node   0: [mem 0x00100000-0xbf78ffff]
	[    0.000000]   node   0: [mem 0x100000000-0x63fffffff]
	[    0.000000]   node   1: [mem 0x640000000-0xc3fffffff]
	...

This is the log when we set "mem=2G" on the boot cmdline:
	...
	[    0.000000] Zone ranges:
	[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
	[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]  // should be 0x7fffffff, right?
	[    0.000000]   Normal   empty
	[    0.000000] Movable zone start for each node
	[    0.000000] Early memory node ranges
	[    0.000000]   node   0: [mem 0x00001000-0x00099fff]
	[    0.000000]   node   0: [mem 0x00100000-0x7fffffff]
	...

This patch fixes the printout, the following log shows the right
ranges:
	...
	[    0.000000] Zone ranges:
	[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
	[    0.000000]   DMA32    [mem 0x01000000-0x7fffffff]
	[    0.000000]   Normal   empty
	[    0.000000] Movable zone start for each node
	[    0.000000] Early memory node ranges
	[    0.000000]   node   0: [mem 0x00001000-0x00099fff]
	[    0.000000]   node   0: [mem 0x00100000-0x7fffffff]
	...

Suggested-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Xishi Qiu <qiuxishi@huawei.com>
Cc: Linux MM <linux-mm@kvack.org>
Cc: <dave@sr71.net>
Cc: Rik van Riel <riel@redhat.com>
Link: http://lkml.kernel.org/r/5487AB3D.6070306@huawei.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
---
 arch/x86/include/asm/dma.h | 2 +-
 arch/x86/mm/init.c         | 4 ++--
 2 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/x86/include/asm/dma.h b/arch/x86/include/asm/dma.h
index 0bdb0c5..fe884e1 100644
--- a/arch/x86/include/asm/dma.h
+++ b/arch/x86/include/asm/dma.h
@@ -70,7 +70,7 @@
 #define MAX_DMA_CHANNELS	8
 
 /* 16MB ISA DMA zone */
-#define MAX_DMA_PFN   ((16 * 1024 * 1024) >> PAGE_SHIFT)
+#define MAX_DMA_PFN   ((16UL * 1024 * 1024) >> PAGE_SHIFT)
 
 /* 4GB broken PCI/AGP hardware bus master zone */
 #define MAX_DMA32_PFN ((4UL * 1024 * 1024 * 1024) >> PAGE_SHIFT)
diff --git a/arch/x86/mm/init.c b/arch/x86/mm/init.c
index 66dba36..07244aa 100644
--- a/arch/x86/mm/init.c
+++ b/arch/x86/mm/init.c
@@ -674,10 +674,10 @@ void __init zone_sizes_init(void)
 	memset(max_zone_pfns, 0, sizeof(max_zone_pfns));
 
 #ifdef CONFIG_ZONE_DMA
-	max_zone_pfns[ZONE_DMA]		= MAX_DMA_PFN;
+	max_zone_pfns[ZONE_DMA]		= min(MAX_DMA_PFN, max_low_pfn);
 #endif
 #ifdef CONFIG_ZONE_DMA32
-	max_zone_pfns[ZONE_DMA32]	= MAX_DMA32_PFN;
+	max_zone_pfns[ZONE_DMA32]	= min(MAX_DMA32_PFN, max_low_pfn);
 #endif
 	max_zone_pfns[ZONE_NORMAL]	= max_low_pfn;
 #ifdef CONFIG_HIGHMEM

^ permalink raw reply related	[flat|nested] 4+ messages in thread
end of thread, other threads:[~2014-12-11 12:26 UTC | newest]

Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2014-12-10  2:09 [PATCH V3 1/2] x86/mm: fix zone ranges boot printout Xishi Qiu
2014-12-10  2:09 ` Xishi Qiu
2014-12-11 12:26 ` [tip:x86/urgent] x86/mm: Fix " tip-bot for Xishi Qiu
2014-12-11 12:26   ` tip-bot for Xishi Qiu

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.