From: Akira Hayakawa <ruby.wktk@gmail.com>
To: thornber@redhat.com
Cc: gregkh@linuxfoundation.org, dm-devel@redhat.com,
driverdev-devel@linuxdriverproject.org,
linux-kernel@vger.kernel.org, snitzer@redhat.com
Subject: Re: [PATCH v2] staging: writeboost: Add dm-writeboost
Date: Sat, 13 Dec 2014 00:09:11 +0900 [thread overview]
Message-ID: <548B0517.6070603@gmail.com> (raw)
In-Reply-To: <20141212142447.GA30315@debian>
> However, after looking at the current code, and using it I think it's
> a long, long way from being ready for production. As we've already
> discussed there are some very naive design decisions in there, such as
> copying every bio payload to another memory buffer, splitting all io
> down to 4k. Think about the cpu overhead and memory consumption!
> Think about how it will perform when memory is constrained and it
> can't allocate many of those rambufs! I'm sure more issues will be
> found if I read further.
These decisions are made based on measurement. They are not naive.
I am a man who dislikes performance optimization without measurement.
As a result, I regard things brought by the simplicity much important
than what's from other design decisions possible.
About the CPU consumption,
the average CPU consumption while performing random write fio
with consumer level SSD is only 3% or so,
which is 5 times efficient than bcache per iops.
With RAM-backed cache device, it reaches about 1.5GB/sec throughput.
Even in this case the CPU consumption is only 12%.
Please see this post,
http://www.redhat.com/archives/dm-devel/2014-February/msg00000.html
I don't think the CPU consumption is small enough to ignore.
About the memory consumption,
you seem to misunderstand the fact.
The rambufs are not dynamically allocated but statically.
The default amount is 8MB and this is usually not to argue.
> Mike raised the question of why you want this in the kernel so much?
> You'd find none of the distros would support it; so it doesn't widen
> your audience much. It's far better for you to maintain it outside of
> the kernel at this point. Any users will be bold, adventurous people,
> who will be quite capable of building a kernel module.
Some people deploy Writeboost in their daily use.
The sound of "log-structured" seems to easily attract storage guys' attention.
If this driver is merged into upstream, I think it gains many audience and
thus feedback.
When my driver was introduced by Phoronix before, it actually drew attentions.
They must wait for Writeboost become available in upstream.
http://www.phoronix.com/scan.php?page=news_item&px=MTQ1Mjg
> I'm sorry to have disappointed you so, but if I let this go upstream
> it would mean a massive amount of support work for me, not to mention
> a damaged reputation for dm.
If you read the code further, you will find how simple the mechanism is.
Not to mention the code itself is.
- Akira
On 12/12/14 11:24 PM, Joe Thornber wrote:
> On Fri, Dec 12, 2014 at 09:42:15AM +0900, Akira Hayakawa wrote:
>> The SSD-caching should be log-structured.
>
> No argument there, and this is why I've supported you with
> dm-writeboost over the last couple of years.
>
> However, after looking at the current code, and using it I think it's
> a long, long way from being ready for production. As we've already
> discussed there are some very naive design decisions in there, such as
> copying every bio payload to another memory buffer, splitting all io
> down to 4k. Think about the cpu overhead and memory consumption!
> Think about how it will perform when memory is constrained and it
> can't allocate many of those rambufs! I'm sure more issues will be
> found if I read further.
>
> I'm sorry to have disappointed you so, but if I let this go upstream
> it would mean a massive amount of support work for me, not to mention
> a damaged reputation for dm.
>
> Mike raised the question of why you want this in the kernel so much?
> You'd find none of the distros would support it; so it doesn't widen
> your audience much. It's far better for you to maintain it outside of
> the kernel at this point. Any users will be bold, adventurous people,
> who will be quite capable of building a kernel module.
>
> - Joe
>
WARNING: multiple messages have this Message-ID (diff)
From: Akira Hayakawa <ruby.wktk@gmail.com>
To: thornber@redhat.com
Cc: snitzer@redhat.com, gregkh@linuxfoundation.org,
dm-devel@redhat.com, driverdev-devel@linuxdriverproject.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH v2] staging: writeboost: Add dm-writeboost
Date: Sat, 13 Dec 2014 00:09:11 +0900 [thread overview]
Message-ID: <548B0517.6070603@gmail.com> (raw)
In-Reply-To: <20141212142447.GA30315@debian>
> However, after looking at the current code, and using it I think it's
> a long, long way from being ready for production. As we've already
> discussed there are some very naive design decisions in there, such as
> copying every bio payload to another memory buffer, splitting all io
> down to 4k. Think about the cpu overhead and memory consumption!
> Think about how it will perform when memory is constrained and it
> can't allocate many of those rambufs! I'm sure more issues will be
> found if I read further.
These decisions are made based on measurement. They are not naive.
I am a man who dislikes performance optimization without measurement.
As a result, I regard things brought by the simplicity much important
than what's from other design decisions possible.
About the CPU consumption,
the average CPU consumption while performing random write fio
with consumer level SSD is only 3% or so,
which is 5 times efficient than bcache per iops.
With RAM-backed cache device, it reaches about 1.5GB/sec throughput.
Even in this case the CPU consumption is only 12%.
Please see this post,
http://www.redhat.com/archives/dm-devel/2014-February/msg00000.html
I don't think the CPU consumption is small enough to ignore.
About the memory consumption,
you seem to misunderstand the fact.
The rambufs are not dynamically allocated but statically.
The default amount is 8MB and this is usually not to argue.
> Mike raised the question of why you want this in the kernel so much?
> You'd find none of the distros would support it; so it doesn't widen
> your audience much. It's far better for you to maintain it outside of
> the kernel at this point. Any users will be bold, adventurous people,
> who will be quite capable of building a kernel module.
Some people deploy Writeboost in their daily use.
The sound of "log-structured" seems to easily attract storage guys' attention.
If this driver is merged into upstream, I think it gains many audience and
thus feedback.
When my driver was introduced by Phoronix before, it actually drew attentions.
They must wait for Writeboost become available in upstream.
http://www.phoronix.com/scan.php?page=news_item&px=MTQ1Mjg
> I'm sorry to have disappointed you so, but if I let this go upstream
> it would mean a massive amount of support work for me, not to mention
> a damaged reputation for dm.
If you read the code further, you will find how simple the mechanism is.
Not to mention the code itself is.
- Akira
On 12/12/14 11:24 PM, Joe Thornber wrote:
> On Fri, Dec 12, 2014 at 09:42:15AM +0900, Akira Hayakawa wrote:
>> The SSD-caching should be log-structured.
>
> No argument there, and this is why I've supported you with
> dm-writeboost over the last couple of years.
>
> However, after looking at the current code, and using it I think it's
> a long, long way from being ready for production. As we've already
> discussed there are some very naive design decisions in there, such as
> copying every bio payload to another memory buffer, splitting all io
> down to 4k. Think about the cpu overhead and memory consumption!
> Think about how it will perform when memory is constrained and it
> can't allocate many of those rambufs! I'm sure more issues will be
> found if I read further.
>
> I'm sorry to have disappointed you so, but if I let this go upstream
> it would mean a massive amount of support work for me, not to mention
> a damaged reputation for dm.
>
> Mike raised the question of why you want this in the kernel so much?
> You'd find none of the distros would support it; so it doesn't widen
> your audience much. It's far better for you to maintain it outside of
> the kernel at this point. Any users will be bold, adventurous people,
> who will be quite capable of building a kernel module.
>
> - Joe
>
next prev parent reply other threads:[~2014-12-12 15:09 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-12-10 11:42 [PATCH v2] staging: writeboost: Add dm-writeboost Akira Hayakawa
2014-12-11 15:26 ` Mike Snitzer
2014-12-12 0:42 ` Akira Hayakawa
2014-12-12 9:12 ` [dm-devel] " Bart Van Assche
2014-12-12 9:35 ` Akira Hayakawa
2014-12-12 9:35 ` Akira Hayakawa
2014-12-12 11:41 ` Bart Van Assche
2014-12-12 22:18 ` Spelic
2014-12-13 7:08 ` Jianjian Huo
2014-12-12 14:24 ` Joe Thornber
2014-12-12 14:24 ` Joe Thornber
2014-12-12 15:09 ` Akira Hayakawa [this message]
2014-12-12 15:09 ` Akira Hayakawa
2014-12-13 6:45 ` [dm-devel] " Jianjian Huo
2014-12-13 6:45 ` Jianjian Huo
2014-12-13 14:07 ` Akira Hayakawa
2014-12-13 14:07 ` Akira Hayakawa
2014-12-14 2:12 ` Akira Hayakawa
2014-12-14 2:12 ` Akira Hayakawa
2014-12-14 2:46 ` Jianjian Huo
2014-12-14 2:46 ` Jianjian Huo
2014-12-14 3:22 ` Akira Hayakawa
2014-12-14 3:22 ` Akira Hayakawa
2014-12-14 3:00 ` Akira Hayakawa
2014-12-14 3:00 ` Akira Hayakawa
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=548B0517.6070603@gmail.com \
--to=ruby.wktk@gmail.com \
--cc=dm-devel@redhat.com \
--cc=driverdev-devel@linuxdriverproject.org \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=snitzer@redhat.com \
--cc=thornber@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.